8567/E8

Amount

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) all as specifed and directed.

Demolition of concrete unreinforced of any description and in any position not otherwise specifically provided all as specified and directed.

Demolition for reinforced concrete of any description and in any position not otherwise specifically provided for cement concrete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid,bedded and pointed in any mortar all as specified and directed.

Demolition of concrete block walling, RR masonary in cement mortar including all quoins archas pillars all as specifed and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water all as specifed and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed..

Dismantling posts or struts (wood, steel or R.C.C.) any description and section, including taking out embedded portion and making good disturbed ground all as specified and directed.

Dismantling fencing wire mesh, any type and size all as specified and directed.

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) area exc 1.5 sqm but n. exc 4 sqm each all as specifed and directed.

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) area exc 1.5 sqm each all as specifed and directed.

Taking down of shutters area exc 1 sqm and not exc 2 sqm each all as specifed and as directed.

Taking down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store all as specifed and directed.

Taking down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store all as specifed and directed.

Dismantling water tank and removing to store of capacity exeeding 250 litres but not exc 500 litres all as specifed and directed.

M&L PCC 1:4:8 type D2, (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40mm graded crushed stone aggragates) as in foundation filling and mass concrete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) as in leveling course for rough finished surfaces of concrete all as specifed and directed.

M&L precast cement concrete type 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in landing, cover slab (for manholes etc) chullah hoods, chajjas, water trough mangers, shelves, and similar articles with plain faces all as specified and directed.

M&L TMT bars 10 mm dia and over, cut to length, bent to shape required including crancking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips all as specified and directed.

All as per item No 21 here in before but 8mm dia all as specified and directed.

M&L Non skid ceramic coloured tiles 300x300x7 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) all as specifed and directed.

M&L glazed ceramic coloured tiles of size 300x200x7mm thick laid over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specifed and directed.

M&L machine cut kota stone slab flooring 20-25mm thick laid over screed bed or bedding layer 20 mm thick in cement mortar 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.

M&L for 16-18mm thick granite slab on top of cooking plateform and bar counter including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and laid over and including 15mm thick screed bed in CM 1:4. including grinding and polishing all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floor, finishing cement concrete surface even and smooth using extra cement all as specified and directed.

Supplied only glass dividing strips 3 mm thick and 38 mm wide and inserted in position to confirm design all as specified and directed.

M&L 75 mm thick PCC 1:2:4, type B-1 (using 12.5 mm graded crushed stone aggregate) as in floor finishish surfaces even & smooth without using extra cement all as specifed and directed.

M&L 75 mm thick PCC 1:3:6 type C-1, (using 20 mm graded crushed stone aggregate), finishing cement concrete surface even and smooth without using extra cement as in plinth protection in bays all as specified and directed.

M&L for pre-polished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed and in need cement slurry in floor with grey cement and pigment lai over and including over screed bed or bedding layer of mortar 20 mm thick in cement mortor 1:6 all as specified and directed.

M&L pre-cast cement concrete block masonary 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) with solid block exc 10 cm in width and set in CM 1:6 all as specifed and directed.

All as per Srl item No.32 here- in before but except blocks all as specifed and as directed.

M&L walling of random rubble stone masonry uncoarsed as well bonded bedded and solidly hearted built in CM 1:6 all as specifed and directed.

All as per item No 34 here in before but except stone all as specifed and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface nexc 20mm to face stone and dressing of face beds and joints as specified of random rubble stone walling, uncoursed or brought upto courses all as specifed and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in coping including form work all as specifed and directed.

M&L 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick or cement concrete surfaces, finished surfaces even and smooth without using extra cement all as specifed and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement all as specifed and directed.

M&L preparation of newly plastered surfaces of walls and applying 2mm thick wall care putty and finishing surfaces even and smooth all as specified and as directed.

M&L preparation of newly plastered wall surfaces and applying two coats of oil emulsion distemper over a coat of primer all as specified and as directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer all as specified and as directed.

M&L preparation of old plastered wall surfaces and applying two coats of cement base paint all as specified and as directed.

M&L preparation of new surfaces of walls and apply three coat of white wash all as specifed and directed.

M&L preparation of old existing surface of walls and applying one coat of white wash all as specifed and directed.

S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate all as specified and directed.

S&F 30mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F solid PVC door frame of size 50X47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube all as specified and directed .

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail; paneling of plain clour PVC sheet to be fitted in the M.S frame welded/ sealed to the styles & rails with suitable PVC sheet beading, and joining together with solvent cement all as specified and directed.

S&F butt hinges of stainless steel 100mm size all as specifed and directed.

S&F butt hinges medium weight cold rolled mild steel 100mm all as specifed and directed.

S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section all as specified and directed.

S&F 150mm long anodised extruded aluminium alloy handles, fabricated type. all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and directed.

S&F expanded metal of weight not exc 4.0 kg per square metre, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed.

S&F bands, straps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges, clamps, hold fasts, hooks for hanging james and similar small articles Fe-410-0 or Fe-310-0 all as specifed and directed.

S&F anodised aluminum section for making doors, windows, partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading all as specified and directed. Note:- Glazing, rubber beading,hinges etc shall be measured and paid separately)

M&L rubber beading for fixing glass panes in aluminium frame work all as specified and directed.

M&L 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/aluminium frame work all as specified and directed.

S&F 5 mm thick sheet glass, fixed to aluminum frame work in panels n.exc 0.5 Sqm in each pane, all as specified and directed.

S&F 4 mm thick sheet glass, fixed to aluminum frame work in panels n.exc 0.5 Sqm in each pane, all as specified and directed.

S&F in repair 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple all as specifed and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or driling out old glazing pins/spring clips all as specifed and directed.

S&F 3 mm thick sheet glass ordinary qauality and glazing with oil putty in square not exc 0.5 sqm in each pane all as specified and directed.

S&F mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc. flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

Supply only chain link MS galvanised fencing, any size or type all as specified and directed.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint on roof over a coat of red oxide primer all as per specified and directed.

M&L preparation of new wooden surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer all as specifed and directed.

M&L preparation of old decorated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on roof all as per specified and directed.

M&L preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specifed and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L or J type or cranked hook bolts all as specifed and as directed.

S&F 0.80 mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drips and straight flashings with grads of zinc coating 275 all as specifed and as directed.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with grade of zinc coating with two corrugation side lap fixed with L or J type or cranked hook bolts in roof/ wall all as specifed and as directed.

All as per item No 75 here-in before but except sheets all as specifed and directed.

S&F 15mm bore GI tubing medium grade with all fittings fixed to wall and ceiling or laid in floor all as specifed and directed.

S&F 20mm bore GI tubing medium grade with all fittings fixed to wall and ceiling or laid in floor all as specifed and directed.

S&F in repair vitreous china squatting pan 'Orissa' pattern size 580x440mm with white integral foot rest (excluding flushing cistern and flush pipe including making good disturbed surfaces) all as specifed and directed.

S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, waste chain and plug and porcelain stopper but including brackets all as specifed and as directed.

S&F in repair Vitreous china bowl urinal flat back size of 465X355X265 mm white (minimum) with grating and union for discharge pipe including flush pipe and waste pipe (excluding flushing cistern) all as specified and as directed .

S&F in repair 32mm bore waste fittings brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and othter end fixed all as specifed and as directed.

S&F in repair 10 ltrs capacity PVC valve less syphonic action type flushing cistern low level white inlet ball valve, float , flush pipe and handle including brackets and fixed all as specifed and directed.

S&F in repair PVC connection 15mm dia and 600mm long all as specifed and directed.

S&F in repair PVC waste pipe 32mm dia all as specifed and directed.

S&F in repair 15 mm bib tap CP fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrules all as specifed and as directed.

S&F in repair 15mm bore chromium plated brass angle cock screwed for iron pipe or union and fixed all as specifed and as directed.

S&F in repair for 15mm bore dia fancy type pillar taps cast copper alloy with capston head chromium plated screwed down high pressure with or with out lettred hot or cold with long screwed shanks and flynuts screwed for iron pipe all as specifed and as directed.

S&F rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule all as specifed and as directed.

S&F 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor including taking down all as specifed and directed.

S&F 75 mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor including taking down all as specifed and directed.

M&L 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

M/S Bhujwan Construction vill Ravigram M/S Bhujwan Construction vill Ravigram M/S Bhujwan Construction vill Ravigram