Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-AOC FLAT NO 101 2ND FLOOR RAGHAVENDRA RESIDENCY PLOT NO 1 2 3 SURVEY NO 27 PICKET SECUNDERABAD 500026 | HYDERABAD | TELANGANA | 500026 | ₹17.8 L Quoted ₹18.4 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹22.8 LRejected-Finance | ₹22.8 L | L2 | Rejected-Finance Not Being Lowest. |
| 3 | L3₹19.3 LRejected-Finance | ₹19.3 L | L3 | Rejected-Finance Not Being Lowest. |
| Sl No | Description | Qty | Unit | L and S ENTERPRISES L1 | Srinivasa Consructions L3 | OM SAI POWER SYSTEMS L2 |
|---|---|---|---|---|---|---|
| 1.00 | M&L for attending and checking the un serviceability/repair/rectification of Street/Security/Flood/Focus light fittings/Junction Boxes etc. any type/size/wattage incl connected items/services etc. by disconnecting and taking down unserviceable light fittings/accessories etc. from the PCC/Steel tubular poles of inner circle area & carrying out necessary repair/rectification/replacement of the unsv light fittings, wiring, connectors, holders, drivers, MCBs, other spares etc. and also removing carbon formed between OH lines and service connections of light fittings including reconnection/refixing after testing complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge. | 700 | Each Job | 45 ₹31,500 | 125 ₹87,500 | 100 ₹70,000 |
| 2.00Important Notes : (i) The Contr will be alloted complaints at MES Complaint Cell on requirement basis on all working days incl Sundays & Holidays. Sufficient experienced & competant Tradesman/Helper/Labour & allied Resources etc. should be deployed by him for completion of day to day complaints within 12 Hrs & 24 Hrs for major breakdowns from the time of reporting/intimation about the complaint. During urgent/emergent cases intimation/information about the breakdown will be conveyed to the Contr through Telephonic/Electronic modes. In the event of any delay beyond above mentioned time limit without prior intimation or genuine cause, Penalty at the rate of twice the quoted rate for each un-attended complaint shall be recovered. (ii) A complaint register with complete details of number of complaints received, number of complaints attended, number of complaints completed, nature of complaint, fitments/fittings etc. used in the rectification process with remarks column from User/MES will be maintained by the Contr & the same shall be updated on a daily basis with initials of JE E/M & periodic checking from Engr-In-Charge/GE. (iii) Quoted rate is deemed to be inclusive of the following & no extra payment shall be allowed on this account : (a) Cost of transportation of Manpower/Materials/Resources etc. to & from the complaint site. (b) Hiring Charge of items/equipments like Vehicle/Ladder/JCB/Crane/Gas Cutter/Welding Machine/DG Set etc. required for succesful completion/rectification of the complaint. (c) In the event of any damage to the property/assets of MES/Air Force/Other Depts, the making good of the damaged/disturbed surfaces etc. & matching to the existing finish has to be done as per their norms/requirement. (d) Cost of taking down damaged/old unsv/defective light fiitings & allied items etc. (e) Cost of Tradesman/Helper/Labour element etc. (f) Cost of minor excavation required for taking out/finding the cable loops/connections etc. (g) A joint inspection shall be carried out on a weekly basis for checking of serviceability of Street/Security etc. lights with Contr Rep/MES Rep & User Rep & points raised shall be noted for necessary compliance. (h) Any item/job missed out in the item description/specification but technically required for successful completion of the work/job is deemed to be included in the unit quoted rates. (j) Major Earthwork & new items required for repair/rectification like Light Fittings/Drivers/MCBs/Wires shall be measured & paid separately under relevant items. | ||||||
| 3.00 | Supply and fix energy saving high power LED Street light of 30W or higher rating made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP-65/66 protection, > 100 Lumen/Watt, > 80 CRI, 120' Beam Angle, 6KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturer instructions & fixing/fitting on existing GI pipe bracket with & including necessary fixing arrangements etc. and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LSTE030S or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR | 60 | Each | 1,170 ₹70,200 | 1,207 ₹72,420 | 1,100 ₹66,000 |
| 4.00 | Supply and fix energy saving high power LED Street light of 50W or higher rating made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP-65/66 protection, > 100 Lumen/Watt, > 80 CRI, 120' Beam Angle, 6KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturer instructions & fixing/fitting on existing GI pipe bracket with & including necessary fixing arrangements etc. and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LSTE050S or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR | 50 | Each | 1,530 ₹76,500 | 1,540 ₹77,000 | 1,470 ₹73,500 |
| 5.00 | Supply and fix energy saving high power LED Street light of 90W or higher rating made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP-65/66 protection, > 100 Lumen/Watt, > 80 CRI, 120' Beam Angle, 6KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturer instructions & fixing/fitting on existing GI pipe bracket with & including necessary fixing arrangements etc. and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LSTE090S or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR | 45 | Each | 2,700 ₹1.2 L | 2,800 ₹1.3 L | 2,850 ₹1.3 L |
| 6.00 | S&F LED flood light fitting of capacity 50 Watts or higher rating made up of pressure die cast aluminium housing and finishing epoxy powder coated, IP-65/66 protection, > 110 Lumen/Watt, > 80 CRI, 120' Beam Angle, 10KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturers instructions including necessary fixing arrangements by means of appropriate sized MS Clamps, nuts, bolts, washers etc. on RCC/Steel poles and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LFL50LNS or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR | 45 | Each | 2,250 ₹1.0 L | 1,760 ₹79,200 | 1,710 ₹76,950 |
| 7.00 | S&F LED flood light fitting of capacity 150 Watts or higher rating made up of pressure die cast aluminium housing and finishing epoxy powder coated, IP-65/66 protection, > 110 Lumen/Watt, > 80 CRI, 120' Beam Angle, 10KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturers instructions including necessary fixing arrangements by means of appropriate sized MS Clamps, nuts, bolts, washers etc. on RCC/Steel poles and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LFL150LNS or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR | 25 | Each | 3,600 ₹90,000 | 4,300 ₹1.1 L | 4,350 ₹1.1 L |
| 8.00 | S&F LED flood light fitting of capacity 200 Watts or higher rating made up of pressure die cast aluminium housing and finishing epoxy powder coated, IP-65/66 protection, > 110 Lumen/Watt, > 80 CRI, 120' Beam Angle, 10KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturers instructions including necessary fixing arrangements by means of appropriate sized MS Clamps, nuts, bolts, washers etc. on RCC/Steel poles and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LFL200LNS or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR | 15 | Each | 5,040 ₹75,600 | 5,100 ₹76,500 | 5,250 ₹78,750 |
| 9.00 | S&F LED flood light fitting RGB of capacity 30 Watts or higher rating made up of pressure die cast aluminium housing and finishing epoxy powder coated, IP-65/66 protection, > 110 Lumen/Watt, > 80 CRI, 120' Beam Angle, 10KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturers instructions including necessary fixing arrangements by means of appropriate sized MS Clamps, nuts, bolts, washers etc. on RCC/Steel poles and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LFLSLR30N SG or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR | 20 | Each | 2,700 ₹54,000 | 2,250 ₹45,000 | 2,350 ₹47,000 |
| 10.00 | S & F roof mounted energy saving, environment friendly, robust Die-Cast Aluminium Housing with Red Polycarbonate Dome LED Aviation Light luminaire with high efficacy of system wattage 10 W, Integral Driver, Supper Flux 5 mm 302 Nos LEDs, IP 65, with & including features of Protection against SHort-Circuit & Surge, Voltage Range of 100-270VAC integrated type with all accessories internally prewired and including connecting up with necessary fixing arrangements with & including necessary PCC (1:2:4) block/platform having dimensions of 30(l)x30(b)x30(h)cm and GI Pipe Light Grade of size 15/20 mm dia of length 2.5mtr with one end threaded & fixed to the LED fitting & electrical connection complete all as specified and as directed by Engr-In-Charge incl taking down old/unsv light fittings. Cat No BGAV 302 LED of make BAJAJ or techno-commercially equiv in Philips/Crompton. | 20 | Each | 4,500 ₹90,000 | 5,700 ₹1.1 L | 5,350 ₹1.1 L |
Updated dates
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
22 Nov 2025, 6:00 pmClosed
GE (AFA) Hyderabad
GE (AFA) Hyderabad, Dundigal, Hyderabad
REPAIRS TO STREET LIGHTS/ HIGH MAST LIGHTS POST TOP LANTERNS AND SOLAR LIGHTS IN THE INNER ROADS AT AFA HYDERABAD
2025_MES_735149_2
8613/E8
Open Tender
Electrical and Maintenance Works
270 days
HYDERABAD
As per NIT
5 documents required · 5 mandatory
₹500
GE (AFA) HYDERABAD
₹40,000
Yes
31 Dec 2025
4 Nov 2025
24 Nov 2025
4 Nov 2025
22 Nov 2025
10 Nov 2025
4 Nov 2025 - 8 Nov 2025
Amount
M&L for attending and checking the un serviceability/repair/rectification of Street/Security/Flood/Focus light fittings/Junction Boxes etc. any type/size/wattage incl connected items/services etc. by disconnecting and taking down unserviceable light fittings/accessories etc. from the PCC/Steel tubular poles of inner circle area & carrying out necessary repair/rectification/replacement of the unsv light fittings, wiring, connectors, holders, drivers, MCBs, other spares etc. and also removing carbon formed between OH lines and service connections of light fittings including reconnection/refixing after testing complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge.
Supply and fix energy saving high power LED Street light of 30W or higher rating made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP-65/66 protection, > 100 Lumen/Watt, > 80 CRI, 120' Beam Angle, 6KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturer instructions & fixing/fitting on existing GI pipe bracket with & including necessary fixing arrangements etc. and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LSTE030S or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR
Supply and fix energy saving high power LED Street light of 50W or higher rating made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP-65/66 protection, > 100 Lumen/Watt, > 80 CRI, 120' Beam Angle, 6KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturer instructions & fixing/fitting on existing GI pipe bracket with & including necessary fixing arrangements etc. and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LSTE050S or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR
Supply and fix energy saving high power LED Street light of 90W or higher rating made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP-65/66 protection, > 100 Lumen/Watt, > 80 CRI, 120' Beam Angle, 6KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturer instructions & fixing/fitting on existing GI pipe bracket with & including necessary fixing arrangements etc. and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LSTE090S or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR
S&F LED flood light fitting of capacity 50 Watts or higher rating made up of pressure die cast aluminium housing and finishing epoxy powder coated, IP-65/66 protection, > 110 Lumen/Watt, > 80 CRI, 120' Beam Angle, 10KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturers instructions including necessary fixing arrangements by means of appropriate sized MS Clamps, nuts, bolts, washers etc. on RCC/Steel poles and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LFL50LNS or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR
S&F LED flood light fitting of capacity 150 Watts or higher rating made up of pressure die cast aluminium housing and finishing epoxy powder coated, IP-65/66 protection, > 110 Lumen/Watt, > 80 CRI, 120' Beam Angle, 10KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturers instructions including necessary fixing arrangements by means of appropriate sized MS Clamps, nuts, bolts, washers etc. on RCC/Steel poles and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LFL150LNS or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR
S&F LED flood light fitting of capacity 200 Watts or higher rating made up of pressure die cast aluminium housing and finishing epoxy powder coated, IP-65/66 protection, > 110 Lumen/Watt, > 80 CRI, 120' Beam Angle, 10KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturers instructions including necessary fixing arrangements by means of appropriate sized MS Clamps, nuts, bolts, washers etc. on RCC/Steel poles and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LFL200LNS or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR
S&F LED flood light fitting RGB of capacity 30 Watts or higher rating made up of pressure die cast aluminium housing and finishing epoxy powder coated, IP-65/66 protection, > 110 Lumen/Watt, > 80 CRI, 120' Beam Angle, 10KV Surge Voltage Protection, SMD Light Source, PF > 0.95, THD < 5% with all accessories as per manufacturers instructions including necessary fixing arrangements by means of appropriate sized MS Clamps, nuts, bolts, washers etc. on RCC/Steel poles and connecting up electrically from Junction box/OH Line to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Make: LUKER, Cat No : LFLSLR30N SG or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR
S & F roof mounted energy saving, environment friendly, robust Die-Cast Aluminium Housing with Red Polycarbonate Dome LED Aviation Light luminaire with high efficacy of system wattage 10 W, Integral Driver, Supper Flux 5 mm 302 Nos LEDs, IP 65, with & including features of Protection against SHort-Circuit & Surge, Voltage Range of 100-270VAC integrated type with all accessories internally prewired and including connecting up with necessary fixing arrangements with & including necessary PCC (1:2:4) block/platform having dimensions of 30(l)x30(b)x30(h)cm and GI Pipe Light Grade of size 15/20 mm dia of length 2.5mtr with one end threaded & fixed to the LED fitting & electrical connection complete all as specified and as directed by Engr-In-Charge incl taking down old/unsv light fittings. Cat No BGAV 302 LED of make BAJAJ or techno-commercially equiv in Philips/Crompton.
S&F Gate Light fitting, IP-54 rated Decorative Outdor type with & incl 01 x 15W LED Bulb B22 3 Star & including all necessary acessories as per manufacturer & fixing with suitable sized nuts, bolts, washers etc. fitted on & with & including GI Pipe 40 mm dia or suitable size of required length & suitable/required PCC work and connecting up electrically from Junction box etc. to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Model - Hester H1 of Make : Luker or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR.
S&F 10W CDL LED Bollard Landscape fitting, IP-65 rated Inverted Pyramid Tripod type made in Aluminium Die Cast Housing with soft 360' light distribution with efficient heat sink for better life, 4KV Surge Protection, Potted Driver with & including all necessary acessories as per manufacturer & fixing with suitable sized nuts, bolts, washers etc. on PCC Plinth/Platform made up of PCC(1:2:4) base having dimensions 20x20x30cm and connecting up electrically from Junction box etc. to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Model - Liara of Make : Crompton, Cat No : LBLSN-10-CDL or techno-commercially equivalent in LUKER/HAVELLS/BAJAJ/PHILIPS/JAGUAR.
S&F 40W CDL LED Landscape fitting, IP-65 rated made in Aluminium Die Cast Housing with Pressure Die Cast Heat Sink, soft 360' indirect light distribution with efficient heat sink for better life, 4KV Surge Protection, Potted Driver, Glare-free, THD < 10%, PF > 0.95 with & including all necessary acessories as per manufacturer & fixing with suitable sized nuts, bolts, washers etc. fitted on & with & including GI Pipe 40 mm dia or suitable size of required length & suitable/required PCC work and connecting up electrically from Junction box etc. to light ftg by means of 3 core 1.5 sqmm copper PVC round conductor incl taking down old unsv conventional light fittings complete all as specified and directed by Engr-in-Charge. Model - Maple of Make : Crompton, Cat No : LPTO-40-CDL-M or techno-commercially equivalent in LUKER/HAVELLS/BAJAJ/PHILIPS/JAGUAR.
S&F 12W/24V DC LED Inground/Underwater fitting, IP-68 made in anti-corrosive Stainless Steel housing with & including 24V DC Power Supply source, suitable electronic driver & IP-68 gel based connectors & all necessary acessories as per manufacturer & fixing with suitable sized nuts, bolts, washers etc. incl taking down old unsv conventional light fittings incl necessary electrical connection & testing complete all as specified and directed by Engr-in-Charge. Make : LUKER, Cat No : LUW12R24V or techno-commercially equivalent in HAVELLS/BAJAJ/PHILIPS/JAGUAR.
S&F Constant Current Electronic Driver for LED Street/Flood light upto 30+/-5% Watt with input voltage range of 140-270V AC, 50HZ, PF > 0.95 giving output voltage of 24V-40V DC including 4KV(internal)/6KV (With external SPD) Surge Protection (as per existing/applicable), THD < 5% with IP 65/66 protection confirming to IEC 61347 incl testing & taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge. Make : Luker/Havells/Wipro/Crompton/Bajaj
S&F Constant Current Electronic Driver for LED Street/Flood upto 45-50+/-5% Watt with input voltage range of 140-270V AC, 50HZ, PF > 0.95 giving output voltage of 24V-40V DC including 4KV(internal)/6/10KV (With external SPD) Surge Protection (as per existing/applicable), THD < 5% with IP 65/66 protection confirming to IEC 61347 incl testing & taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge. Make : Luker/Havells/Wipro/Crompton/Bajaj
S&F Constant Current Electronic Driver for LED Street/Flood upto 100+/-5% Watt with input voltage range of 140-270V AC, 50HZ, PF > 0.95 giving output voltage of 24V-40V DC including 4KV(internal)/6/10KV (With external SPD) Surge Protection (as per existing/applicable), THD < 5% with IP 65/66 protection confirming to IEC 61347 incl testing & taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge. Make : Luker/Havells/Wipro/Crompton/Bajaj
S&F Constant Current Electronic Driver for LED Street/Flood upto 200+/-5% Watt with input voltage range of 140-270V AC, 50HZ, PF > 0.95 giving output voltage of 24V-40V DC including 4KV(internal)/6/10KV (With external SPD) Surge Protection (as per existing/applicable), THD < 5% with IP 65/66 protection confirming to IEC 61347 incl testing & taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge. Make : Luker/Havells/Wipro/Crompton/Bajaj
M&L for boring under road manually with labour suitable for inserting 50 mm bore pipe at a depth 0.75 to 1.0 mtr complete.
M&L for cutting the existing hardstanding/PCC/WBM road/rocky surfaces at a depth of not less than 75 cm & 30 cm in width for passing of HT cables through GI pipes, returning filling in, complete incl finishing the surfaces by providing cement concrete type B1 (1:2:4) with 20 mm graded aggregate upto 20 cm, finishing to a uniform smooth surface complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.
Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.
M&L for providing sand cushioning for protection of UG cable in trenches with dry (coarse) sand approved quality including filling, spreading and punning down to desired thickness complete.
Supply and laying sub class "B" bricks in trenches for protection of UG Cable complete.
M&L for GI pipe light grade with all running fittings (ISI Marked), laid in trenches, under road or fixing on wall/pole/crossing drain/nallah etc. of bore 40 mm complete all as specified and directed. Make : TATA/JINDAL/PRAKASH.
M&L for GI pipe light grade with all running fittings (ISI Marked), fixed on Perimeter/Street light PCC poles etc. of bore 15 mm incl taking down old unsv one complete all as specified and directed. Make : TATA/JINDAL/PRAKASH.
Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4.0 Core 10 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab/Gloster
Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 2.0 Core 6 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab/Gloster
M&L for cement concrete in foundation, filling mass concrete type-C2, 1:3:6, (40mm graded aggregate) for pole foundation etc. & finishing the surface even & smooth without using extra cement incl necessary formwork complete all as specified & as directed.
M&L for PCC (1:2:4) Type B-1 (using 20mm graded stone aggregate) for coping of poles etc & finishing the surface even & smooth without using extra cement incl necessary formwork complete all as specified & as directed.
M&L for preparation of old painted surfaces of PCC Poles of any size/type & applying two coats of weather coat paint of approved colour & grade incl writing of Pole Numbers & also painting of GI Pipe brackets & clamps with two coats of Aluminium Paint over a coat of red oxide primer complete all as specified & as directed by the Engr-In-Charge.
M&L for preparation of old painted surfaces of Steel Tubular Poles of any size/type & applying two coats of Aluminium Paint over a coat of red oxide primer of approved colour & grade incl writing of Pole Numbers & also painting of GI Pipe brackets & clamps complete all as specified & as directed by the Engr-In-Charge.
M&L for Re Stringing and fixing in position of sagged ACSR conductor of required size of OH lines including binding with aluminium binding wire complete after removing and refixing of UG Cables/Service wires to the ACSR conductor complete all as specified and as directed by the Engr-in-charge.
S&F PVC LT Line Separators 4 way with nuts & bolts arrangement in the existing OH lines on pole on height 7.0-8.0 Mtrs above GL incl taking down old unsv one complete all as specified and as directed by the Engr-In-Charge.
S&F cable three core PVC insulated, PVC sheathed, multi stranded aluminium conductor cable size 2.5 Sqmm for connection from Junction Box/OH Lines to Street/Security lights including taking down old unsv one complete all as specified and as directed. Make: Havells/Finolex/Polycab/Gloster
Supply, install, commissioning & testing of Street/Perimeter light Control Panel suitable for 6.0 KW load, Contactor Rating 32 A TP, MCB Rating 40 A TPN, Digital 24 hour switch suitable for mounting inside LT Panel for automatic operation. Make : Cat No IHXTS03060 of Make Havells or techno-commercially equivalent confirming to IS/IEC 61439 & 60529 with & incl extended wide band coil, FRLS internal wiring, in-built short-circuit protection, Class H insulation incl taking down old unsv one complete all as specified & as directed by Engr-In-Charge.
Supply, laying, commissioning & testing of 1.1 KV, 4.0 Sqmm, EPR Insulated, Cotton Braiding & overall PCP Outer Sheathed, Class 5 copper cable all as confirming to IS-9968-1 specifications for connection of High Mast Lighting System from Feeder Pillar / LT Control Boards including necessary ferrules, nuts, bolts, washers etc. & also necessary fixing arrangements incl taking down old unsv one complete all as specified & as directed by Engr-In-Charge.
OM SAI POWER SYSTEMS (BID ID -3474877)
Srinivasa Consructions (BID ID -3474137)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.11 MB
BOQ_826798.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid