SPECIAL REPAIR TO BLDG NO T-07(COOK HOUSE) OF 259 TRANSIT CAMP AND BLDG NO T-18 (ORs BARRACK) OF 308 FD HOSPITAL AT DRASS UNDER GE KARGIL

Amount

Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 cm thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame shutter(without taking off shutter from the frame) but exc 1.5 sqm but n.exc 4 Sqm each, complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs /blankets, any thickness, including cover fillets, complete all as specified and directed by Engr-in-Charge.

Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden, aluminium steel frames glazed with putty or fixed with beads , complete all as specified and directed by Engr-in-Charge.

M&L for Plain fillets of second class soft wood (KAIL) sectional area exceeding 13 Sqcm and not exceeding 25 Sqcm, square, rectangular or triangular in section, clean sawn, secured with nails, complete all as specified and directed by Engr-in-Charge.

M&L for 12 mm thick ply wood (7 Nos of ply) grade BWR, type BB, fixed with screws, to timber frame work, as in wall/ceiling/partition, flat or sloping, complete all as specified and directed by Engr-in-Charge.

M&L for 6mm thick ply wood (5 Nos of ply) grade BWR, type BB, fixed with screws, to timber frame work, as in wall/ceiling/partition, flat or sloping, complete all as specified and directed by Engr-in-Charge.

M&L for 2nd Class soft wood moulding as in cornicses, picture, rails and the like n.exc.6 sq cm., complete all as specified and directed by Engr-in-Charge

S&F Second class soft wood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

Second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge.

M & L for Glazed ceramic coloured tiles of size 300x200x7 mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4), complete all as specified and directed by Engr-in-Charge.

M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over including 15 mm thick screed bed in CM 1:4, complete all as specified and directed by Engr-in-Charge.

Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, laid over including 15 mm thick screed bed in CM 1:4, complete all as specified and directed by Engr-in-Charge. complete all as specified and directed by Engr-in-Charge.

Supply and fixing 100 mm long mild steel butt hinges medium weight cold rolled , complete all as specified and directed by Engr-in-Charge.

S & F 200 mm long Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engr-in-Charge.

S&F 150mm long, mild steel handles cast type , fitted, complete all as specified and directed by Engr-in-Charge.

M & L for 75mm thick, plain cement concrete, type D-2, 1:4:8, (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge.

S&F Mild steel sliding door bolt 200 mm long plate type slove enamelled blak wioth bright bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engr-in-Charge.

S&F Mild steel sliding door bolt 300 mm long plate type slove enamelled blak wioth bright bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engr-in-Charge.

Prepation of new wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel Paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

Prepation of old wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel Paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

S & F 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.

M & L for 25 mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base, floor finishes etc making surface even and fair all as per specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Rolled mild steel in roof trusses (framed) purlins, crane gantries, rails and fastenings and heavy brackets freming (beams, tee, angle channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde-E-250) quality A, complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick masonry, finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.

M&L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick masonry, finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitining complete all as specified and directed by Engr-in-Charge.

Prepration of old plastered or unplastered surfaces of wall and applying one coat of approved shade of oil emulsion distemper on walls complete, all as specified and directed by Engr-in-Charge.

Preparation of old plastered surfaces of walls and applying two coats of oil bound distemper with approved colour and shade, complete all as specified and directed by Engr-in-Charge.

Prepation of new plastered or unplastered surfaces of walls and applying two coats of Cement base paint , complete all as specified and directed by Engr-in-Charge.

Prepration of old plastered or unplastered surfaces of walls and applying two coats of cement base paint , complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided , complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge.

S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L type or J-type hooks and washers, in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge..

S&F 0.63mm thick plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275. complete all as specified and directed by Engr-in-Charge.

Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, over a coat of red oxide complete all as specified and directed by Engr-in-Charge.

Preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

Material and labour for kota stone flooring 20-25mm thick over cement screed bed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete laid over and including 20 mm thick screed bed in CM 1:4, complete all as specified and directed by Engr-in-Charge.

Material and labour for kota stone flooring 20-25mm thick in riser or step, skirting, dado and piller and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete laid over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed by Engr-in-Charge.

S & F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with intergral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe, complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair PVC low level flushing cistern 10 Ltr capacity with & including brackets for fixing to walls and PVC flush pipe of LDPE pipe of pressure rating 6 kgf/ sq.cm, complete all as specified and directed by Engr-in-Charge.

Supply and fixing 1000 Ltr capacity Rotational moulded HDPE water storage tanks (Cylindrical vertical closed top), double wall construction, hoisted and fixed in position or placed in position inside or outside the building, connecting up pipes and securing access covers, complete all as specified and directed by Engr-in-Charge.

Taking up or down steel water tubing 15 mm bore of pipe and connections, including cleaning for reuse if found serviceable or removal to store , complete all as specified and directed by Engr-in-Charge.

Taking up or down steel water tubing 20 mm bore of pipe and connections, including cleaning for reuse if found serviceable or removal to store, complete all as specified and directed by Engr-in-Charge.

Supply and fixing 15mm dia GI tube medium grade galvanised, with all fitting and fixed to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge.

Supply and fixing 20mm dia GI tube medium grade galvanised, with all fitting and fixed complete laid in trenches, complete all as specified and directed by Engr-in-Charge.

Supply and fixing Bib taps,15 mm bore,fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule, complete all as specified and directed by Engr-in-Charge.

Supply and fixing 20mm dia Gun metal globe or gate valve iron wheel head, screwed both ends, heavy duty ISI marked, complete all as specified and directed by Engr-in-Charge.

PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc. , complete all as specified and directed by Engr-in-Charge..

Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete all as specified and directed by Engr-in-Charge..

All as per item no. 1.55 here-in-before but using 2.5 sqmm for one three pin socket outlet 15 Amps switch socket outlet on independent board, complete all as specified and directed by Engr-in-Charge.

S&F Switch piano 5 Amps, single pole one way flush type, complete all as specified and directed by Engr-in-Charge..

S&F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps Flush type, complete all as specified and directed by Engr-in-Charge.

S&F Switch socket combination 2 in 1, 5 and 15 Amps, Flush type, complete all as specified and directed by Engr-in-Charge.

S&F Ceiling rose surface bakelite 65x50mm, two to three terminals, complete all as specified and directed by Engr-in-Charge.

Sheet metal enclosure for DB's double door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed by Engr-in-Charge.

S&F MCB, single pole and neutral, 32 Amp, 240V, 10KA, complete all as specified and directed by Engr-in-Charge.

S&F MCB, single pole, 5 to 32 Amp, 240V, 10KA, complete all as specified and directed by Engr-in-Charge.

Rectangular block of second class hard wood of size 30 x 25 x 5 cm depth, closed recessed, complete all as specified and directed by Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode 600mm x 600mm and 6 mm thick buried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of plate not less than 1.5 metres below normal ground level, connected to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron protected by provision of G I light grade pipe 25 mm bore including provision of concrete pit in PCC 1:2:4 type B1 using 20mm grade stone aggregate with 40mm thick cover of RCC 1:2:4 reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs two number and with 6mm dia MS bar handle made to shape and GI medium grade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 40mmx8mm flat iron with fixing arrangement funnel wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50M all as per electric plate No 3 of SSR Part-I conected to earth test point as specified or indicated including testing on completion.

Supply and fixing LED 18 Watt Tubelight fitting decorative ultra slim square profile linear with extruded polycarbonate environment friendly Make Havells Cat part LHEXBTP7IN1W018, complete all as specified and directed by Engr-in-Charge.

1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension , complete all as specified and directed by Engr-in-Charge.

House Service bracket (hook type) complete with 3.0 m long G.I pipe 40 mm dia (medium grade), two numbers 90° bends, M.S hook and stay including taking down the existing unserviceable bracket. NOTE :- The unit rate shall to include for :- (a) Cutting holes in walls etc. of any description, grouting rag bolts and making good with cement mortar 1:3 including making good finishing to match the existing work and removing rubbish off the premises as directed (in case of bracket being fixed to masonry wall). (b) G.I pipe house service bracket hook type fabricated out of 3.0m long screwed G.I pipe of medium grade and comprising of two number 90° bend (pipe dia) screwed tight to the top ends of the service vertical limb, the two ends of the service provided with two number of turned spit tight fit, well seasoned teak wood bushing and the bracket fixed plumb vertical against the wall with two number flat iron clamps (fabricated out of 50 x 6mm flat iron with 4 No. 16 mm dia ragged bolts of appropriate size with screwed ends, tightened with 16 mm dia nuts with 6 mm thick washer against the clamp tightening collar.

Sub main wiring with two single core 6 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 6 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete all as specified and directed by Engr-in-Charge.

All as per item no. 1.69 here-in-before but cable size 2x4 sqmm for phae & neutral and 1x4 Sqmm for earth -ditto-

M&L for exhaust fan complete with metallic blade , heavy duty , mortor 240 V single phase of size 300 mm sweep incl making hole etc and fixation with 04 nos fully threaded bolt grouted in wall , nut and proding , wire mesh from out side complete with connection, complete all as specified. and directed by Engr-in-Charge

Amount of Sch 'A' Part - II (Credit Schedule) Rs.81250.00 (minus) as listed in Schedule of credit shall be deducted from total BOQ during AOC.

JP AND CO.

M/S HAJI HASSAN ENGINEERING WORKS