CONSTRUCTION OF WORKING WOMENS HOSTEL AT PERURKADA, TRIVANDRUM DESIGN, PREAPARATION OF SCHEMATIC DIAGRAM AND EXECUTION OF PLUMBING AND SANITORY WORKS REGARDING

Amount

PARTICULARS

EWC Providing and fixing first quality European type water closet with PVC low level flushing cistern with black solid plastic seat and lid, with brass hinges and rubber buffers, brass bolts, nuts, concealed hanging arrangement with clamp and rubber adapter joint with S.S screws and washers complete, including cutting holes in brick masonary and R.C.C. and making good the walls and floors wherever required:

Wash basin Supply, Installing, testing and commissioning of approved make of Engineer incharge . wash basin white color fixed under counter with tap unit of Engineer approved make,with necessary accessories such as Flexible inlet connection pipes, brackets etc., complete including silicon sealant including cutting holes in brick masonary and R.C.C. and making good the walls and floors wherever required.

Providing and fixing S.S soap tray with PVC cleats and S.S. screws including cutting and making good the walls wherever required complete as directed by Engineer in charge

Supply, Installing, testing and commissioning of approved make 15 mm health faucet with flexible tube 1.0m long, CP crutch, nozzle etc.with complete accessories

Providing and fixing 15mm dia C.P. brass angle stop valve with C.P. copper connecting pipe 375m long with nuts and washers, C.P. brass wall flange complete including cutting oles in wall and making good the wall wherever required

Providing and fixing 600 mm long towel rail with S.S. screws wooden cleats including necessary fittings cutting holes in wall and making good the wall wherever required.

Providing and fixing bib cock tap including cutting and making good the walls wherever required complete in all respects.

Same as above with lock neck for Mess wash area

Providing and fixing C.P wall mounted fixed model non- telephonic shower arrangement with connecting legs & flanges including concelaed stop cock other accessories for the complete installation .and cutting holes in wall and making good the wall wherever required

Kitchen Sink Supply, Installing, testing and commissioning of approved make kitchen sink with single bowl &Single drain board made of Stainless steel 1 No.40 mm dia CP bottle trap with extension pipe, wall flange, waste coupling, and 1 No. 15 mm dia sink cock unit wall mounted type , C.I.brackets etc. necessary for complete installtion

Drainage .

Providing and fixing swr uPVC soill, waste and vent pipes conforming to IS 13592 including all fittings (plain or access door) e.g. bends,junctions, cowls, offsets, access pieces etc., jointing with rubber ring joints, fixed with M.S. clamps painted with two or three coats enamel paint of approved shade over a coat of primer fixed in cement concrete 1:2:4 blocks including cutting holes in wall/floors and making good wherever required.The quoted rate shall include necessary chasing in walls making good the same in C.M. 1:4, necessary fittings viz., elbows, tees etc., including M.S angle and fixing the pipe with clamps at 1.00 m spacing complete.

a) 160mmdia 6Kg/cm2

a)75 mm dia 6 Kg/cm2

Excavating trenches of required width in hard/dense soil for pipes, cables,etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth as required including getting out the excavated soil, and then returning the soil as required, in layers not ex-ceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil .And Providing and fixing swr uPVC soill and waste pipes conforming to IS 13592 including all fittings (plain or access door) e.g. bends,junctions, cowls, offsets, access pieces etc., cutting holes and making good wherever required.The quoted rate shall include necessary connection to manholes ,traps and making good the same

a) 160mmdia 6Kg/cm2

a)110mm dia 6 Kg/cm2

Floor Trap Supplying , and fixing approved make UPVC floor trap with 82mm dia outlet with extension piece and CP brass/SS cover on top etc., complete with cement concrete support all round the floor trap including grouting for making it water proof on sides.

Cleant out Providing and fixing uPVC clean outrequired complete in all respects. plug with suitable open able plug as

Gully Trap, Providing , trenching and fixing square-mouth Square gully trap class Sp-1 complete with C.I grating brick masonry chamber with water tight C.I. Cover with frame of 300X300 mm size (inside)

Rain water Providing and fixing uPVC pipes, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with as per direction of Engineer in Charge.

External

Constructing brick masonry 800x800 manhole with necessary manhole cover and with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand), inside cementplastering 12mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand)finished with a floating coat of neat cement, 12 mm thick outside plastering withcement mortar 1:3 including excavation, refilling and disposal of surplus earth as directedby Engineer in Charge complete as per standard design

Excavating trenches of required width in hard/dense soil for pipes, cables,etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth as required including getting out the excavated soil, and then returning the soil as required, in layers not ex-ceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil .And Providing and fixing swr uPVC soill and waste pipes conforming to IS 13592 including all fittings (plain or access door) e.g. bends, junctions, cowls, offsets, access pieces etc., cutting holes and making good wherever required.The quoted rate shall include necessary connection to manholes ,traps and making good the same

a)160 mm diameter (6kg/cm2)

Water Supply

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

a) 65mm dia nominal bore (10 kg/cm2)

b) 40mm dia nominal bore (12 kg/cm2)

c) 32mm dia nominal bore (12 kg/cm2)

d)22mm dia nominal bore (12 kg/cm2)

Supply and fixing embedded CPVC( Chlorinated Poly Vinyl Chloride) water supply pipes operating pressure-7 Bar @ 82 Deg C and 28 Bar @ 23 Deg C) for pipes . Pipes shall be joined using solvent welded CPVC fitting i.e. Tees, Elbows, Couplers, Unions, Reducers,brushing etc. including transition fittings ( Connection between CPVC & metal pipe/GI) with Adaptors( Both Male & Female threaded) with only CPVC solvent cement .Cost shall be inclusive of making maximum of 7.5 x 7.5 cm chasing in wall and floors of pipe, making good the same by using 1:1cement mortar and providing protection to embedded pipes and fitting joints complete as required . All termination points for installation shall be to as per Technical Manual of manufacturer of pipes & fitting.

a)25mm dia nominal bore (12 kg/cm2)

b)15mm dia nominal bore (12 kg/cm2)

Providing and fixing lever ball valve tested to a pressure of 21 kg/cm2 with loctite chrome plated brass valve carbon steel handle PVC coated complete in all respects. (screw type)

22mm dia

32mm dia

64mm dia

40mm dia

external silt 225*225

cpvc sdr 9 25mm ( Consealed )

manhole including cover 50*50

kitchen waste (RING 1.2M dia)

bath (RING 1.2M dia)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Note: 1. Make of water supply and sanitary items: Best branded ISI make Jaquar, Cera, Hindware, Parryware or eq in the order of preference.

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2. Rate should be inclusive of cutting floor, wall, including making the same after pipe laying.

3. Rate should be inclusive of GST.

4.Work should be executed as per DSR/PWD/Irrigation Dept. specification and direction of Engineer at site.

CUBIX INFRASTRUCTURES

K D George