WBHD/AE/ESD-IV/e-NIQ-04/25-26

Amount

B type flat:- Dismantling the existing wiring and mending good the damages as per G.S .

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal/Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

S&F 230 V, 32 DP MCB (make ABB) with S S Encloser (make ABB ) on existing angle iron frame.

S & F of 250 V, 5/16 Amp. & 3/10 Amp. per way (2+10) way SPMCB DB with sheet steel enclosure double door with IP -42 /43 protection with D.P. isolator as incomer and SP MCB as( C curve ,10 KA ) as outgoing as below concealed in wall after cutting wall and mending good the damages to original finish (as directed) incl. interconnection with suitable sizes of copper wires and neutral link and provision for earthing attachment (2+10) way enclosure (ABB) with 32 Amp DP isolator and 10 Nos. (6-32 Amps) SPMCBs.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) for ECC in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [only PVC casing-capping on ceiling and remaining portion concealed] (Avg run. 6 mtr.)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish ( On Board)

Distn. Wiring by 1.1k.V Gr. 3 X 22/0.3 (1.5 sq.mm.) stranded FR’ PVC insulated & unsheathed copper wire (Finolex Make) in 13 mm. dia polythene pipe concealed in wall to 230V. 5/3 pin, 6 Amp. (Separate plug point) as per G.S.

supply and fixing 150mm x 100mm x 65mm sheet metal switch board with top cover flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works with 2 no 5 A plug socket and 2 no 5A piano key type switch as per G.S.(Separate plug point)

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. (Aqua Guard & Chimney)

Distn. Wiring by 1.1 K.V. Gr. 2 x 36/ 0.3 (2.5 sq.mm.) + 1 x 22/0.3 (1.5sq.mm)single core stranded “FR” PVC insulated and unsheathed copper wire (Finolex Make) in 19 mm. dia 3 mm. thick polythene pipe complete with all accessories embedded in wall to15 Amp. Power plug points as per G.S.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (Power Plug)

S & F 240 V, 20A, plug socket (Brand approved by EIC) on sheet metal switch board embedded in wall in side the bathroom & S/F 240 V, 20A, Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall out side of the bathrom incl. S & F 2 nos.100 x 100 x 65 mm. MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for socket by cutting bakelite/perspex cover and making necessary connections as required. ( For geyser).

Distn. Wiring by 1.1 K.V. Gr. 2X 56/ 0.3 (4 sq.mm.) + 1 X 36/0.3 (2.5 sq.mm) single core stranded “FR” PVC insulated and unsheathed copper wire (Finolex /Havells/R. R. Kabel [Unilay] Make) in 19 mm. dia 3 mm. thick polythene pipe complete with all accessories embedded in wall to15 Amp. Power plug points as per G.S. (For AC)

S & F 250V. 6 pin, 20 Amp. Flush types plug socket (both Anchor) on sheet metal switch board concealed in wall with Bakelite top cover incl. making necy. connection with S & F (100 X 100 X65) mm. sheet metal box incl. earthing attachment as per G.S.

Supply & Fixing 240 V, 25 A, Modular type starter (MK-Northwest) with 25A Modular switch type DP MCB (C-Curve)and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (For AC)

S & F 250V. AC superior type call bell (Anchor) on H.W board on wall incl. S &F H.W board as per G.S.

S & F Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.

Distn. Wiring by 1.1 K.V. Gr. 2X 84/ 0.3 (6 sq.mm.) + 1 X 56/0.3 (4 sq.mm)single core stranded “FR” PVC insulated and unsheathed copper wire (Finolex /Havells/R. R. Kabel [Unilay] Make) in 19 mm. dia 3 mm. thick polythene pipe complete with all accessories embedded in wall as per G.S. (For Submain cable )

C type flat:- Dismantling the existing wiring and mending good the damages as per G.S

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal/Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

S&F 230 V, 32 DP MCB (make ABB) with S S Encloser (make ABB ) on existing angle iron frame.

S & F of 250 V, 5/16 Amp. & 3/10 Amp. per way (2+10) way SPMCB DB with sheet steel enclosure double door with IP -42 /43 protection with D.P. isolator as incomer and SP MCB as( C curve ,10 KA ) as outgoing as below concealed in wall after cutting wall and mending good the damages to original finish (as directed) incl. interconnection with suitable sizes of copper wires and neutral link and provision for earthing attachment (2+10) way enclosure (ABB) with 32 Amp DP isolator and 10 Nos. (6-32 Amps) SPMCBs.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) for ECC in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [only PVC casing-capping on ceiling and remaining portion concealed] (Avg run. 6 mtr.)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish (On Board)

Distn. Wiring by 1.1k.V Gr. 3 X 22/0.3 (1.5 sq.mm.) stranded FR’ PVC insulated & unsheathed copper wire (Finolex Make) in 13 mm. dia polythene pipe concealed in wall to 230V. 5/3 pin, 6 Amp. (Separate plug point) as per G.S.

supply and fixing 150mm x 100mm x 65mm sheet metal switch board with top cover flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works with 2 no 5 A plug socket and 2 no 5A piano key type switch as per G.S. (Separate plug point)

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. (Aqua Guard & Chimney)

Distn. Wiring by 1.1 K.V. Gr. 2 x 36/ 0.3 (2.5 sq.mm.) + 1 x 22/0.3 (1.5sq.mm)single core stranded “FR” PVC insulated and unsheathed copper wire (Finolex Make) in 19 mm. dia 3 mm. thick polythene pipe complete with all accessories embedded in wall to15 Amp. Power plug points as per G.S.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (Power Plug)

S & F 240 V, 20A, plug socket (Brand approved by EIC) on sheet metal switch board embedded in wall in side the bathrom & S/F 240 V, 20A, Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall out side of the bathrom incl. S & F 2 nos.100 x 100 x 65 mm. MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for socket by cutting bakelite/perspex cover and making necessary connections as required. ( For geyser)

Distn. Wiring by 1.1 K.V. Gr. 2X 56/ 0.3 (4 sq.mm.) + 1 X 36/0.3 (2.5 sq.mm) single core stranded “FR” PVC insulated and unsheathed copper wire (Finolex /Havells/R. R. Kabel [Unilay] Make) in 19 mm. dia 3 mm. thick polythene pipe complete with all accessories embedded in wall to15 Amp. Power plug points as per G.S. (For AC)

S & F 250V. 6 pin, 20 Amp. Flush types plug socket (both Anchor) on sheet metal switch board concealed in wall with Bakelite top cover incl. making necy. connection with S & F (100 X 100 X65) mm. sheet metal box incl. earthing attachment as per G.S.

Supply & Fixing 240 V, 25 A, Modular type starter (MK-Northwest) with 25A Modular switch type DP MCB (C-Curve)and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (For AC)

S & F 250V. AC superior type call bell (Anchor) on H.W board on wall incl. S &F H.W board as per G.S.

S & F Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.

Distn. Wiring by 1.1 K.V. Gr. 2X 84/ 0.3 (6 sq.mm.) + 1 X 56/0.3 (4 sq.mm)single core stranded “FR” PVC insulated and unsheathed copper wire (Finolex /Havells/R. R. Kabel [Unilay] Make) in 19 mm. dia 3 mm. thick polythene pipe complete with all accessories embedded in wall as per G.S. (For Submain cable )

D type flat:- Dismantling the existing wiring and mending good the damages as per G.S

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal/Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

S&F 230 V, 32 DP MCB (make ABB) with S S Encloser (make ABB ) on existing angle iron frame.

S & F of 250 V, 5/16 Amp. & 3/10 Amp. per way (2+8) way SPMCB DB with sheet steel enclosure double door with IP -42 /43 protection with D.P. isolator as incomer and SP MCB as( C curve ,10 KA ) as outgoing as below concealed in wall after cutting wall and mending good the damages to original finish (as directed) incl. interconnection with suitable sizes of copper wires and neutral link and provision for earthing attachment (2+10) way enclosure (ABB) with 32 Amp DP isolator and 8 Nos. (6-32 Amps) SPMCBs.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) for ECC in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [only PVC casing-capping on ceiling and remaining portion concealed] (Avg run. 6 mtr.)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish (On Board)

Distn. Wiring by 1.1k.V Gr. 3 X 22/0.3 (1.5 sq.mm.) stranded FR’ PVC insulated & unsheathed copper wire (Finolex Make) in 13 mm. dia polythene pipe concealed in wall to 230V. 5/3 pin, 6 Amp. (Separate plug point) as per G.S.

supply and fixing 150mm x 100mm x 65mm sheet metal switch board with top cover flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works with 2 no 5 A plug socket and 2 no 5A piano key type switch as per G.S.(Separate plug point)

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. (Aqua Guard & Chimney)

Distn. Wiring by 1.1 K.V. Gr. 2 x 36/ 0.3 (2.5 sq.mm.) + 1 x 22/0.3 (1.5sq.mm)single core stranded “FR” PVC insulated and unsheathed copper wire (Finolex Make) in 19 mm. dia 3 mm. thick polythene pipe complete with all accessories embedded in wall to15 Amp. Power plug points as per G.S.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (Power Plug)

S & F 240 V, 20A, plug socket (Brand approved by EIC) on sheet metal switch board embedded in wall in side the bathrom & S/F 240 V, 20A, Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall out side of the bathrom incl. S & F 2 nos.100 x 100 x 65 mm. MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for socket by cutting bakelite/perspex cover and making necessary connections as required. ( For geyser)

Distn. Wiring by 1.1 K.V. Gr. 2X 56/ 0.3 (4 sq.mm.) + 1 X 36/0.3 (2.5 sq.mm) single core stranded “FR” PVC insulated and unsheathed copper wire (Finolex /Havells/R. R. Kabel [Unilay] Make) in 19 mm. dia 3 mm. thick polythene pipe complete with all accessories embedded in wall to15 Amp. Power plug points as per G.S. (For AC)

S & F 250V. 6 pin, 20 Amp. Flush types plug socket (both Anchor) on sheet metal switch board concealed in wall with Bakelite top cover incl. making necy. connection with S & F (100 X 100 X65) mm. sheet metal box incl. earthing attachment as per G.S.

Supply & Fixing 240 V, 25 A, Modular type starter (MK-Northwest) with 25A Modular switch type DP MCB (C-Curve)and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (For AC)

S & F 250V. AC superior type call bell (Anchor) on H.W board on wall incl. S &F H.W board as per G.S.

S & F Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.

Distn. Wiring by 1.1 K.V. Gr. 2X 84/ 0.3 (6 sq.mm.) + 1 X 56/0.3 (4 sq.mm)single core stranded “FR” PVC insulated and unsheathed copper wire (Finolex /Havells/R. R. Kabel [Unilay] Make) in 19 mm. dia 3 mm. thick polythene pipe complete with all accessories embedded in wall as per G.S. (For Submain cable )

Add G.S.T @ 18% on aggregate amount of BOQ item No 1 to 54.

Add L.W.Cess @ 1% on aggregate amount of BOQ item No 1 to 54 (after add G.S.T 18 %).

POWER ENGINEERING CONCERN (BID ID -6884151)

BHARAT INFOCOM (BID ID -6878484)