GENERAL-Ward 42 project no 537 - side protection wall for chakayadam padam road-ward 42

Amount

siden protection wall

3.5.1:Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

11.4.1.1:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I. P.C.C grade M 10 (i) Nominal mix 1:3:6

12.5.3:Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 For height upto 5 m III. R.C.C grade M 20

11.8:Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

OD243856/2024-2025:Steel Work Welded in built up Sections/Framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer using Structural steel etc.as required, in gratings, frames,guard bar, railings, brackets, gates and similar works Details of cost for 1mx1m framed guard bar gratings of 0.218q Data Derived from DA R 10.25.2

10.5:Painting Two Coats on New Concrete Surfaces <br> Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701

10.6:Painting on Steel Surfaces <br> Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

OD243855/2024-2025:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material ( Rate for road width less than 2.40 m after deducting roller consolidation)

OD243884/2024-2025:providing and laying of Interlocking Concrete Block Pavements using 80 mm M40 Hydraulic blocks of approved size ,and Design & Shape laid in Required pattern over and Including a Compacted bed of 6 mm Stone aggregate of 50 mm average thickness, etc all Complete as per the Direction of Engineer in Charge ( Details for 10 m2)

OD446075/2024-2025:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

11.4.5:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203<br>V. R.C.C. grade M 25

OD446810/2024-2025:Providing welded mesh fencing using with GI welded mesh of size 50*50*10 gauge with outer frame of 30*30*5 mm equal angles including all cost of materials , labour charges etc. complete. including priming coat.

KAREEM.K.P (BID ID -2137371)

ABDUL SALAM M P (BID ID -2137105)

Bidder Name

KAREEM.K.P

salam aboobacker

ABDUL SALAM M P