Kothakulangara devaswom-Paravur group--Pucca repairs and maintenance to the temple structures reg-General Civil Work

Pucca R&M to Temple structures

Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Supplying and fixing Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete .

Supplying and fixing Anjily wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete.

Supplying and fixing Dept. wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc . complete.

Supplying Ist class M.P.roofing tiles of size 410 x 235 mm or nearest available size with single groove

Supplying M P hip & ridge tiles 400 mm or nearest available size

Roofing with departmental (old and new) (400mm or nearest available size M.P hip & ridge first class set in CM 1:4 including finishing the edges

Roofing with departmental (old & new) MP tiles(size 410X235 mm ) or nearest available size

Valleying with new aluminium plain sheet 0.4mm thick of 900mm wide with overlap 150mm at joints excluding planking and including nails etc. complete.

Labour enaged for dismantling hearth in the thidappally : Man coolie engaged

Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually / by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineerin- Charge:In cement mortar

Providing and laying 50mm thick ashlar slabs (department supply) for flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush, with proper slope as directed by the department officers.

Providing ornamental ghanadwaram with CM 1:3(1 cement:3 fine sand ) 30 cm x 74 cm inside size centre portion soothrappattika with padmunamuna having 6 cm width 30 mm projection and 50 cm ornamental kumilas 3 nos and ghanadwaram Kal provided ornamental with 48 cm height from top 8 cm projection with various curve cutting etc.bottom portion with 6 cm width 30 cm thick cutting finishing with cement flushing coat including all labour charges and material etc. complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying 50 mm thick Ashlar (Granite) slabs for flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush, with proper slope as directed by the department officers.

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Please Enable Macros to View BoQ information