REMARKING OF RUNWAY, TAXI TRACK, LOOP, DISPERSAL AND LINKS AT AF STN JODHPUR

Amount

M&L for preparation of old concrete/bitumen surfaces on rigid/Taxi track by brushing, washing, rubbing by gunny bags over 10 cm width or girth of any description and applying one coat of 1st quality exterior weather proof water base emulsion on lines, dashes arrows, letters etc by road marker spray machine / manual as per site requirement any tint all as directed by Engineer-in-Charge.

All as per item No 1.00 above but n exc 10 cm width or girth all as directed by Engineer-in-Charge.

M&L for preparation of old concrete/bitumen surfaces on rigid/ flexible portion of Runway/Taxi track by brushing, washing, rubbing by gunny bags over 10 cm width or girth of any description and applying one coat of synthetic enamel paint to lines. Dashes, arrows letter etc (First quality) by road marker spray machine / manual as per site requirement any tint paint all as directed by Engineer-in-Charge.

M&L for cutting out flexible surface from existing joints of dimension 12mm wide and 25 mm deep, removing the debris from site by sweeping wire brushing, cleaning, and applying a coat of bitumen primer to the sides and bottom of the joints and sealing with bitumen based sealant including backup rod conforming to IS 1834-1984, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing the demolished material or debries out side MoD land complete all as specified & directed by the Engineer-in-Charge.

M & L for Cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

Material & labour for providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved color, design & pattern as in footpath, parks, lawns, drive ways or light trafic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50 mm thick compacted bed of fine clean sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in-Charge.

Material & labour for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in edge of Paver Block flooring complete all as specified and as directed by the Engr-in - Charge. NOTE FOR ALL ABOVE ITEMS:- The work will be carried out as per user requirement from 1830 hrs to 0600 Hrs. The deployment of labour and T&P arrangement on the Runway shall be intimated to the contractor lby 0800 Hrs each day in the moring. The contractor has to provide necessary arrangement such as lights etc and quote the rate accordingly for considering late working hours at night. Nothing extra will be paid on this account.

M/S IK CONSTRUCTION

M/s. Dhananjay Construction

Om Trading Corporation