Development of Entry Exit driveway work for Block - 46B&C, 46J, 47A&B, 50A & 56C in DTA Area of GIFT City

1200000422: GRANULAR SUB-BASE (GSB) COURSE: Providing & laying Granular Subbase as per MoRTH specifications / technical specifications in accordance with the Grading I of Table 400-1 of MoRTH specifications, spreading & levelling as per required camber to achieve desired compacted thickness as per approved drawing etc. as specified in section 401 of Technical specifications etc complete as per drawing, specification and as directed by the Engineer - in -Charge. Only Crushed Aggregate is to be used. Natural GSB / Gravel will not be allowed.

1200000423: WET MIX MACADAM (WMM): Providing and laying Wet Mix Macadam using graded crushed stone as per MoRTH/Technical specification mix in accordance with approved Job Mix formula at Optimum Moisture Content by mechanical mixing in a pug mill, carriage of mix material by tipper to site laying with Sensor paver finisher in uniform layer of required thicknesses on prepared granular subbase and compacting with vibratory roller with proper compaction to achieve desired density in required line, grade and camber etc. complete as specified inTechnical Specification or as directed by Engineer-in-charge. The rate shall also include lighting for works if required, guarding, barricading etc.

1200000007: PCC M15 - MIN. CC - 300KG: Providing and laying M 15 controlled cement concrete with minimum cement content of 300 kg per CMt for all structural members below and above ground level including mixing, placing, consolidating, curing, formwork etc. all complete as per detailed technical specification & as directed by Engineer-in-charge.

1200010030: PAVEMENT QUALITY CONCRETE (M-45): Construction of un-reinforced, dowel jointed, plain cement concrete pavement of M45 Grade over a prepared sub base. Coarse and fine aggregate of M45 Grade concrete shall confirm to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid manually, spread, compacted using mechanical surface vibrator, vacuum dewatered surface vibrated using trimix machine, and broom finished, in a continuous operation including formwork. Provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, as per MORTH / IS specifications. Admixtures as approved, curing compound, finishing to lines and grades complete as shown in the drawing, specified in the technical specification and as directed by Engineer-in-charge.

1200000223: REINFORCED CONCRETE INCL. FORMWORK - M30: Providing and laying in position controlled machine mixed cement concrete of Grade M30 with minimum cement content of 360 kg/m3 excluding the cost of reinforcement and including shuttering, de-shuttering, all material, labours, tools, machineries, mixing, placing, compacting, finishing, curing, etc. at all levels as per given drawings, design & shape, detailed technical specification & as directed by Engineer-in-charge.

1200000012: P&F - REINFO. HYSD TMT BARS - FE 500: Providing and Supply of reinforcement at Site, fabricating, cleaning, cutting, bending, binding with 16 SWG soft annealed wire and placing in position on/ at all levels and locations as per drawings, etc. complete for all Reinforced Concrete works. Using High Yield Strength Deformed bars of TMT of grade Fe 500 and conforming to IS: 1786. No separate payment for chairs, laps, wastage and binding wire will be made, etc. complete as per drawing, specification and as directed by the Engineer-in-Charge.

1200016687: P&F SHOT BLASTED PAVER BLOCK -80MMTHK: Providing and laying 80mm thk. factory made Shot blasted Cement Concrete paver blocks of M-40 grade with approved color design and pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness& size/ shape, made by table vibratory method using PU mould, laid in required colour& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per technical specifications and as direction by Engineer-in-Charge. Paver Size : 200x100x80mm, Make: Vyara or Approved Make

1200016688: P&F PRECAST KERB INCL. PCC: Providing and laying in position approved make pre-cast Vacuum wet pressed concrete kerb stone of size & design as per approved drawing & of M-25 grade, laid using 100mm thick PCC M-15 grade as base in required line, level and shape, curvature, etc., jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including required excavation & making drainage opening wherever required, etc. all complete as per drawings, technical specifications & as directed by Engineer-in-charge. Size: 600X300X100mm Thick, Make: Vyara or Approved make

1200016689: P&F PRECAST RADIUS KERB INCL. PCC: Supplying, storing and fixing of factory made approved make Wet Cast Radius precast concrete kerb stones of required radius & Size laid using 100mm thick PCC M-15 grade as base in required line, level and shape. Kerbstone shall be having required & size or as approved as per design drawing and pattern. Quoted rate shall include necessary excavation, Refilling, carting away excess earth outside the site, jointing & pointing in CM 1:4 where ever required, as per technical specification and as directed by Engineer-in-charge. Concrete Grade: M-25, Size: Height 300mm & Thickness 100mm,Make: Vyara or Approved Make

1200002844: REMOVAL OF EXISTING PRECAST KERB STONE: Removal of existing pre-cast concrete kerb with due care including removal of rubbish, mortar, etc., disposal of unserviceable material and shifting & stacking of serviceable material with all leads and lifts within GIFT Premises as directed by Engineer.

1200014142: KERB STONE LAYING: Fixing of the I-shape Precast kerb stone (Kerb will be provided by GIFT) as per approved drawing. Cost including excavation in all types of soil except rock, providing a leveling course of M 15 grade concrete 100mm thick to required slope (inclusive of form work), jointing of kerb stone in line and level with C.M.1:2 proportion , painting exposed surface with one coat of primer and two coats of approved paint as per IS 164 in the yellow/white or any shade as specified as per technical specifications and as directed by Engineer-in-charge.

1200006064: P&F - UPVC PIPE - 160MM DIA - 6KG/M2: Providing, lowering, laying, jointing 160mm dia of 6Kg/Sqm ISI marked uPVC pipes as per the levels including all necessary fittings, formation of spouts with proper finishing by cement mortar and specials like bends, tees, couplers, reducers, etc., cost of labour, material, cement solvent, etc. as directed by Engineer-in-charge.

1200008582: BRICK CHAMBER-350x350MM- INCL. RCC COVER: Constructing brick masonry chamber (350mmX350mm inside - Up to 600mm depth) in cement mortar 1:4 (1 cement : 4 coarse sand) including RCC Cover necessary excavation, 100mm base foundation PCC, both side 12mm thick plaster, pvc/upvc pipe placing, formation of spouts with proper finish, cost of labour, material, tools, tackels, etc. as directed by Engineer-in-charge.

1200000137: CORE CUT IN NOS. - 150 MM DIA: Providing holes in the R.C.C. Slabs/beams by Core Cutting and finishing the holes accurately with Cm 1:4 and disposal of debris as directed by ENGINEER within a lead of 1 Km: iv) Dia 150 mm

1200000123: RCC DISMANTLING-CHIPPING/BREAKING-LD-1KM: Dismantling R.C.C. at all levels by chipping/breaking using breaker etc. including cutting of reinforcement and removal of the debris within a lead of 1 Km all complete as directed by Engineer-in-charge.

1200000393: DISMANTLING OF BRICK/BLOCK/STONE MASONRY: Dismantling Brick/Block/Stone Masonry at all levels by chipping/breaking using breaker etc., finishing the same with CM 1:4 and removal of the debris within a lead of 1 Km all complete as directed by Engineer-in-charge.

1200004685: PROVIDING UNSKILLED DEPARTMENTAL LABOUR: Providing services of unskilled manpower as specified. Item includes all labour, supervision, tools, tackles, consumables, cleaning of storm water drain and other petty works, collecting and disposing off the debris at designated location with all lead and lifts, etc. all complete as directed by Engineer-in-charge.

1200000494: PAINTING OF KERB STONE: Painting Exposed surface of Shoulder Kerb stone including preparing the surface by scrapping with sand paper, applying coat of lafi/putty, applying a coat of primer and and two coats of 1st grade road marking paint as per IS 164 using stencil in colour as specified and as directed by Engineer

1200004682: SITC - PVC PIPES - 4KG/CM2 - 50 MM DIA: Providing, fixing, jointing & testing standard length ISI mark rigid unplasticised PVC pipes suitable for potable water having pressure 4kg/cm2 of 50 mm diameter including all fittings, supports, etc. at all levels as specified & as directed by Engineer-in-charge.

1200002846: JCB HIRE ON HOURLY BASIS: Providing services of JCB. The rate shall be inclusive of cost of Operator, fuel, oil and other consumables etc. The payment shall be paid on hourly basis.

1200002849: TRACTOR GRADER HIRE ON HOURLY BASIS: Providing services of Tractor Grader. The rate shall be inclusive of cost of operator, fuel, oil and other consumables etc. The payment shall be paid on hourly basis.

1200002848: VIBRATORY ROLLER HIRE ON HOURLY BASIS: Providing services of Vibratory Roller - 8 to 10 tonne capacity including making good surface the undulation , watering, proper rolling etc. The rate shall be inclusive of cost of Operator, fuel, oil and other consumables etc. The payment shall be paid on hourly basis.