GENERAL ASE works Navakerala Sadass Reformation of Customs seawall from 60 m north of CP 2063 towards south in Vatakara Municipality Vatakara LA General Civil Work

60.34.7:A.S.E Reformation work- Calicut -Supplying at site of work,granite stones20 to40 dm3 in size , including stacking for measurement.

60.36.7:A.S.E Reformation work- Calicut -Supplying at site of work,granite stones 45 dm3 in size , including stacking for measurement.

60.40.7:A.S.E -Reformation work- Calicut- Supplying at site of work granite rubble 200 dm3 in size as nearly cubical as possible the minimum dimension in any of the three perpendicular directions passing through the centre of gravity of each individual stone being not less than 45 cm including loading and unloading charges etc. and marking with distinguishing number on three faces with paint etc complete .

60.44:Unified Data for A.S.E work - Conveyance of departmental granite stone 20 to 45 dm3 in size from stack at site and dumping in position (60% 45dm3,30% 30 t0 40dm3 and 10% 20 to 30dm3 stones) to lines and levels to form the core of the sea wall as per approved design including all leads and lifts etc.complete as per the directions of the departmental Officers at site.

60.41:Dumping in position(not to be packed)granite rubble 200dm3 in size suitably to form the armour course of sea wall as per approved design(dumping with a lead upto 50m)using rail track or pneumatic type equipment with crane or winches or by any other method each trip to take 3 minutes and carry 3 stones(1.6 ton)

60.42:Dumping in position( to be packed)granite rubble 200dm3 in size suitably to form the armour course of sea wall as per approved design(dumping with a lead upto 50m)using rail track or pneumatic type equipment with crane or winches or by any other method each trip to take 3 minutes and carry 3 stones(1.6 ton)

8.5:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.