Construction of Boys Hostel 100 Nos. Students for B. Pharmacy Govt. College Bagwan in District Kangra, (HP) (Deposit Work)

Amount

Excavation in foundation, trenches etcetera. in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out wter (Surface and sub soil water) upto any depth/ height or any quantum of water including de-watering, removal of slush, lift upto any heights, stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter)layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-Incharge including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in earth work and filling in 15cm (Fifteen centimetre) layers in foundation and plinths including ramming, watering and consolidating upto all leads, lifts and in all classification of soil as directed by the Engineer-Incharge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in drains and channels etcetera; in earth work in all kind of classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiseling or welding out works where blasting work is prohibited including shoring, strutting and pumping or bailing out water (Surface and sub soil water) upto any depth or any height / quantum of water including slush which may arrise during dewatering removal of slush and any other mixed variety of soil, stacking the excavated soil for all heights clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinth sides of foundations etcetera. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per approved drawing, design, specification and as per the entire satisfaction of the Engineer-Incharge including carriage of material within all leads, lifts of and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Sand filling under floor including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design, entire satisfaction and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings etcetera including curved surfaces where ever required as per Architectural drawing, design and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, bressumers sides and soffits of beams haunchings etcetera upto all depths/height including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, posts and struts, square, rectangular, polygonal in plan etcetera; including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetre),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in work in edge of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetre),so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls(any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded broken/crushed stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Brick bat filling in the sockpit complete as per approved specifications, drawing, design as per entire satisfactions and directions of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals . The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Stone filling under floor within hard stone of approved quality including watering, ramming, consolidating and dressing complete as per approved specifications, drawing, design as per entire satisfactions and directions of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals . The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded broken/crushed stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum ccompressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic metre mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete in all depths/thickness upto all floors levels as per specifications, drawing, design as per entire satisfaction and direction of Engineer-Incharge including carrige of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depth/thickness etcetera upto all levels as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts in all depth/thickness for all floors heights as per specifications approved drawing, design including carriage of materials within all heights, leads, lifts and other incidentals, as per approved drawing, design,specifications and as directed by the Engineer-Incharge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing moulding upto all floor level as per specifications approved drawing, design including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design,specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-25 (M- twenty Five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty Five Newton per square millimetre) with cement contents not less than 400 Kgs (Four hundred kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in walls individually or forming box louvers and projected band upto all floor level as per specifications, approved drawing, design including carriage of material within all heights, leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying upto floor level cement concrete work M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre mechanically mixed and vibrated and curing complete including centring and shuttering etcetera. but excluding the cost of reinforcement as in mouldings, cornices, window sills etcetera upto any girth as per specifications, drawing and design complete as directed by the Engineer-Incharge.upto floor all level including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated and curing complete for reinforced concrete work in Chhajjas for all thickness in all floor levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement for reinforced concrete work up to all floor level up to all height as per direction of Engineer-Incharge including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and specification. The rate is inclusive of octroi, royality, Malkana, sale tax, GST and any other taxes imposed by the Government.

Providing Tor steel reinforcement TATA/SAIL/TISCO for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position,cost of binding wires complete for all floors height as per specifications, approaved drawing, design and carriage of material within all leads, lifts and other incidentals, as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Random rubble masonry coursed with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement: six sand: twelve graded crushed stone aggregate 20 mm (Twenty millimetre nominal size) raking out joints in cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all heights, leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints with cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all heights, leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetre) thick with cement concrete 1:2:4((one cement: two sand: four graded crushed stone aggregate 12.5mm (Twelve decimal five millimetre nominal size) and curing complete, as required at site including carriage of material within all heights, leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) / VG-10 using 1.70 Kgs (One decimal seven zero Kilograms) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil; including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class brick masonry using common burnt clay building bricks in super-structure upto any floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of materials within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class Half brick work using common burnt clay building bricks with hoop iron in super-structure upto all floor level in cement mortar 1:4 (One cement: Four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 35mm (Thirty five millimetre) thick factory made flush door shutters both side commercial ( non-decorative)Phenol bonded termite resistant and boiling water proof, core of black-board construction with frame of first class hard wood and well matched commercial three ply veneer with vertical grains or cross bands and face veneer on both faces of flush door shutter ISI marked IS No-2202 of Century ply Board/Kit ply/ Green ply complete including carriage of material within all leads, lifts and other incidentals as per specifications approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 35 mm(Thirty Five millimetre) Thick Factory made Flush door shutter both side commercial (non- decorative) Phenol bounded termite resistant and boiling water proof, core of black board construction with frame of Ist class hard wood and well matched commercial three ply veneer with vertical grains or cross band and face veneer on both faces of flush door shutter IST marked IS No.2202 of centuary ply board/ Kit ply /green ply and finished with 3 mm(Three millimetre) Thick plastic sheet uo to 100 cm(one hundred centimeter) height from inside only for toilet door shutter as per specifications,approved drawing,design including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetre) thick first class Deodar wood wire gauge shutters using galvanized S.S. wire gauge of I.S. gauge designation 85G (Eighty five-G) with wire of dia 0.56 mm (Zero decimal five six millimetre) for doors, windows and clearstory windows including bright finished/ black enameled iron hinges with necessary screws complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing with glass panes of 5.50 mm (Five decimal five zero millimetre) thickness of Modi gaurd/Saint Gobin (weight not less than 13.75 kg/sqm (Thirteen decimal seven five kilgram) per square metre in door, window, ventilator shutters and partition etcetera. complete as per specifications, architectural drawings,design and the directions of Engineer-In-charge including entire carriage of material within all leads, lifts and other incidentals . The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing cup board shutter made of 19mm (Ninteen millimetre) thick commercial board water proof and termite resistant of Kit ply/Centuary ply including 6/12mm (Six/Twelve millimetre) thick hard wood edging lipping on all sides of the shutters,the outer side of the shutter to be finished with 2mm (Two millimetre) thick MICA lamination of kitply/Centuary ply and nickel plated piano hinges with necessary screws complete 2(Two millimetre) thick MICA lamination and hard wood edging to be measured and paid for separately including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetre) thick water proof commercial board in shelves/box of Kitply/Centuary ply for cup board and all cut portions of the board shall have 6mm (Six millimetre) thick hard wood edging with butt joints & fixing with nails & screws etcetera complete (Hard wood edging to be measured and paid for separately) including entire carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetre) thick ply wood lining of Kitply/Century ply with butt jointing (frame work and cover fillets to be measured and paid for separately) in back side of cup boards complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetre) thick water proof commercial board in SDB shutter of Kitply/Centuary ply and all cut portions of the board shall have 6mm (Six millimetre) thick hard wood edging with 0.63 mm thick P.G.I. sheet lining on inner side of the shutter including fixing with nickel plated piano hinges and screws etcetera complete(Hard wood edging to be measured and paid for separately) including entire carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetre) thick hard wood edging cover fillets (beading) section including mitring at junction with wood screw and nail complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 2mm (Two millimetre) thick coloured or plain laminated sheet ( Sunmica)/MICA of Kitply/Century/ ply wood sheet with approved adhesive and nails & screws etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (1cement : 5 sand; 10 graded crushed stone aggregate 40mm(Forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in Foundation and plinth including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing cup-board shutter magnic catcher with necessary screws etcetera complete within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five millimetre) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make) including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing MS (mild steel) grills of required pattern in MS (mild steel) frames of windows etcetera with M. S flat 20x5mm (Twenty into Five millimetre), square bars in combination as per detail with round headed bolts and nuts or by screws complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) diametre steel rod for pelmet stainless curtain with necessary fittings complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen millimetre) size sliding door bolts or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S Tower bolts (Barrel type) of approved quality bright finished or black enameled with nuts and screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

200x10mm (Two hundred into Ten millimetre) nominal size

150x10mm (One hundred fifty into Ten millimetre) nominal size

100x10mm (One hundred into Ten millimetre) nominal size

Providing and fixing M.S. handles of approved quality dyed to required colour and shade with the necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five millimetre) nominal size

100mm (One hundred millimetre) nominal size

75mm (Seventy five millimetre) nominal size

Providing and fixing M.S. (mild steel) hooks and eyes of 250mm (Two hundred fifty millimetre) size of approved quality dyed to required colour and shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) bright finished Aluminium floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing hydraulic door closer ISI marked of Gogrej C0712 speed hydraulic 60 Kgs (Sixty kilograms) (Silver) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

White glazed tiles 6mm (Six millimetre) thick of Nitco/Orient-Bell/Kajaria of size 20x30cm (Twenty into thirty centimetre) in skirting, risers of steps and dado laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetre) thick Kota Stone flooring 55x55cm (Fifty five into Fifty five centimetre) of uniform colour with black mandana /Jaislmer yellow marble band laid over base of cement mortar 1:4(One cement: Four sand) and jointed with Grey cement slurry mixed with pigment to match the shade of the Kota stone slab including rubbing nosing , moulding and polishing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 50mm (Fifty millimetre) thick cement concrete flooring 1:2:4(One cement: Two sand : Four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size laid in one layer finished with a floating coat of neat cement upto all floor level including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying red sand stone slab flooring 40mm (Forty millimetre) average thick laid on 20mm (Twenty millimetre) average thick base of cement mortar 1:4 (One cement : Four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,nosing, moulding and granite polish finish complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying vibro hydraulic compressed and polished 300x300x25mm (Three hundred by three hundred by twenty five millimetre) polished terrazzo tiles of NTC ISI marked No-1237, top layer in 70% (Seventy percent) white, 30% (Thirty percent) grey cement. The ratio of chips shall be 55% (Fifty five percent) white and 15% (Fifteen percent) each mahroon, yellow & dark green shade. The size of chips shall be O,B,2B. The sample of tiles shall be got approved from the competent authority before its execution at site, in floor, treads, steps and landing laid on a bed of 25mm (Twenty five millimetre) thickness of cement mortar 1:6 (One cement : Six sand) jointed with neat cement slurry mixed with pigment to match the shade and colour of tiles (wherever required) including rubbing and polishing upto all floor levels complete including entire carriage of material with in all leads, lifts and other incidetals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetre) thick Baroda green with semi round nosing in work top of Kitchen/Pantry Marble of required shade laid on bed of 20mm (Twenty millimetre) thick cement mortar 1:3 (1 cement:3 sand) including jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of marble complete upto all floors levels including entire carriage of material with all leads,lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetre) thick kota stone slab in risers of steps, skirting, dado and pillars laid on a bed of 12mm (Twelve millimetre) (Average) thickness cement mortar 1:3 (One cement : Three sand) and jointed with Grey cement slurry mixed with pigment to match the shade of the Kota stone slabs including rubbing, polishing, nosing and moulding complete and entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25 mm (Twenty five millimetre) thick Kota stone single slab of uniform colour with semi round nosing in flooring laid over 20 mm (Twenty millimetre) (average) thick base of cement mortor 1:4 (1 cement : 4 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, nosing and moulding complete upto all floor levels including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 20mm (Twenty millimetre) thick white Marble slab with grey streaks internally as well as externally having semi round nosing laid on 20 mm (Twenty millimetre) thick base of cement mortar 1:3 (1 cement:3 sand) including jointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of marble complete upto all floors level including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying automatic vibro hydraulically compressed and polished terrazzo tiles of NTC ISI marked No. 1237 in 70% (Seventy percent) white cement and 30% (Thirty percent) grey cement. The ratio of chips shall be 55% (Fifty five percent) white cement and 15% (Fifteen percent) each mahroon, yellow and dark green shade in skirting and risers of steps not exceeding 30cm (Thirty centimeter) in height laid on a bed of 10mm (Ten millimetre) thickness in cement mortar 1:3 (One cement : Three Sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (Wherever required) including rubbing, polishing and nosing complete upto all floors level, including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 60mm (Sixty millimetre) thick Precast cement conrete inter locking paver blocks of NTC vibro compacted upto M-50 (M-Fifteen) grade including border or kurb lock grey or coloured over sub-base of concrete laid over 25mm (Twenty five millimetre) thick average thickness of cement mortar 1:4 (One cement : Four sand) and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing, rubbing & polishing complete (Sub base concrete floor to be measured paid and for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 150mm (One hundred fifty millimetre) thick M.S Single acting spring hinges of approved Quality with necessary screws complete including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero millimetre) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six millimetre) diametre with prepainted limpet and rubber washers complete with all accessories as required within all leads, lifts and other. incidentals as per specifications, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips having propper Gola shape 60cm (Sixty centimeter) over all with 0.60mm (Zero point Sixty millimetre) thick prepainted sheet of TATA Durashine for roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Tweny) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of material within all leads, lifts of material and other. incidentals, as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimeter) over all with 0.60mm (Zero point Six zero millimetre) thick prepainted sheet of TATA Durashine for roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 5 (Five) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of materials within all leads, lifts of material and other. incidentals, as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimeter) wide 30cm (Thirty centimeter) deep of 0.63mm (Zero decimal six three millimetre) thick plain G.I. sheet of TATA with dome shape grating which shall be of M.S. plate 25x5/6mm Sqm (Twenty five into five/six millimetre) square/ round shape with 6mm (Six millimetre ) dia bars in dome bolts and nuts and washers etcetera including making necessary connections with rain water pipe complete and carriage of material within all leads, lifts and other incidentals, as per specifications, approved architectural drawing, design and as directed by the Engineer-Incharge The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S.B.P. iron sheet of 2.00mm (Two decimal zero zero millimetre) thickness for eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-Incharge (Base members of steel work shall be measured and paid separately) including carriage of material within all leads, lifts and other. incidentals as per specifications, approved architectural drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100 mm (One hundred millmetre) diametre pipes on wall face UPVC for rain water pipes of Supreme/Sant/Fimolex/Prince of working pressure not less than 4.5 kg/sqcm (Four point five kilogram per sqaure centimetre) including filling the joints with approved adhesive complete as directed by the Engineer-In-charge as per specifications, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millmetres) diametre UPVC plain bend on wall faces accessories for rain water pipes of Supreme/Sant/Finolex/Prince including filling the joints with approved adhesive complete as directed by the Engineer-Incharge, as per specifications, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100 mm (One hundred millmetres) diametre UPVC plain shoe on wall faces accessories for rain water pipes of Supreme/Sant/Finolex/Prince including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. holder bat clamps of approved design for PVC rain water pipe embedded in cement concrete blocks 10x10x20cm (Ten into ten into twenty centimeter) of 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size including cost of cutting holes and making good the walls etcetera complete and carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections joints channels, angles, tees frame work for ceiling/false ceiling, flats with connection plates or angles, cleat as in trusses, trussed purlins, main and cross beams, hip jack rafters, purlins connected to common rafters and the like of TATA/SAIL in building including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint including framed work with angle, tees including entire carriage of materials within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing door frames manufactured from M.S. channel of 75 x 40 x 3.7 mm (Seventy five into forty into Three point seven millimetre) with M.S. flat 40 x 12 mm (Forty into twelve millimetre) as per design and drawing including jamb, lock jamb, bead and if required angle threshold of M.S. angles 50x25 mm (Fifty into Twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split ends tails to each jamb including steel butt hinges 2.5 mm (Two point five millimetre) thick with a provision a locking arrangement and shock absorbers as specified and applying a coat of approved primer after pre-treatment of the surfaces including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron cupboard frames manufactured from M.S. Angle iron section 25x25x5mm (Twenty five into Twenty five into Five millimetre) thickness including hinges jamb,lock jamb,bead and if required angle thrashold of mild steel angle 25x25mm (Twenty five into Twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two decimal Five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. channels in doors and windows, dormer frames manufactured from M.S. channel section 75x40x5mm (Seventy five into Forty into Five millimetre) M.S. flat 75x5mm (Seventy five into Five millimetre) in combination as per design drawing including hinges, jambs, beads if required, threshold of M.S. angles 50x25mm (Fifty into Twenty five millimetre) and "Z" section as per detail welded or rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butts hinges 2.5mm (Two decimal Five millimetre) thick with a provision of locking arrangement, shock observes as specified and applying a coat of approved steel primer after pre-treatment of surfaces including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made double steel shutter side hung (one glazed and other wire gauge) of standard rolled steel section jointing, mitered , welded and manufactured to relevant ISI standard specification with 16x3.15mm (Sixteen into three decimal fifteen millimetre) lugs, 20cm (Twenty miliimetre) long embeded in cement concrete block 1:3:6 (One cement isto Three Sand isto Six graded stone aggregate 20mm (Twenty milimetre) nominal size) with wooden/steel plugs and screws or rawl plugs screws with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with special putty for glazed shutter and wire gauge or designation 85G with metal beading on other side complete including priming coat of red lead paint as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections jointed mitred and welded with 16x3.15mm(Sixteen into three decimal fifteen millimetre) lugs 10cm (Ten centimeter) long embeded in cement concrete blocks 15x10x10cm (Fifteen into Ten into Ten centimetre) size of 1:3:6 (One cement isto Three Sand isto Six graded stone aggregate 20mm (Twenty milimetre) nomial size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or bolts and nuts as required and iron fittings, including providing and fixing 5mm thick glass panes of Modi gaurds or Sant Gobin with glazing clips and special metal sesh putty of approved make complete including applying a coat of read lead paint as per specifications and as per direction of Engineer-In-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Fixed steel windows

Top hung ventilators

Supplying and fixing expended metal to wood or steel members in partition etcetera having weight 6.50 Kg (Six point five zero kilogram) per square metre complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying double coat water proofing treatment done with Dr. Fixit Torch felt over depressive toilet area including maintain a clean and saturated surface coverage of 6 square feet per Kilogram to achieve 1mm (One milimetre) thickness. This coating shall also be extended upto 300 mm (Three hundred millimetre) vertically. The second shall be applied of first coat. Then sprinkle sand on top surface of applied Dr. fixit- Fastflex while still tacky over the second coat. Then apply cement mortar (1:4) one cement : four sand admixed with 200ml (Two hundred mililitre) of pidiproof LW@200ml/50kg (Two hundred milli litre per fifty Kilogram) of cement over the floor with the suitable gradient towards drain pipe, while the second coat of Dr. Fixit is still tacky complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetre) dia M.S. hollow pipe hand rail in Balcony/Varamdah including M.S square Bar 20 x 20 mm (Twenty into twenty millimetre) & 12 x 12 mm (Twelve into twelve millimetre) balusters in combination with M.S. flat as per Architectural drawing ,design and specification including entire carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S./Bombay pipe 5cm (Five centimetre) diametre in wood colour stair case railing over M.S. flat and M.S (Mild steel) balusters of 19x19 mm (Nineteen into Nineteen millimetre) solid square bars with M.S. flat 19x6 mm (Nineteen into Six millimetre) with a clear height of 85 cm (Eighty five centimetre) @ 30 cm (Thirty centimetre) - centre to centr embeded in cement concrete steps and jointing with electic gas welding at top along with hand rail of hollow M.S. hollow pipe of complete with a priming coat of red lead paint as per specifications including carriage of material within all leads, lifts and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing hollow pipe 40mm diametre hand rail slip resistant with round ended joint at two level at 75 and 90cm (Seventy and ninety centimetres) height welded with 25mm (Twent five millimetre) diametre M.S. hollow pipe which baluster embedded in cement concrete @ 60cm (Sixty centimetre) centre to centre and jointing with electrical gas welding at top alongwith hand rail . The balusters welded/jointed with 2 Nos M.S. flat of 50x5mm (Fifty into Five millimetre) complete with applying priming coat of red lead paint complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) with Nerolac/ Asian Paint of approval shade on new steel and other metal surfaces brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter including carriage of material within all leads, lifts and other incidentals as per specifications,approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian Paint after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting ready mixed paint brushing wood primer pink including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on over new wood and wood based surfaces with Nerolac/ Asian Paint of approval shade brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 (One cement: Three sand) upto all floor level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Monad profiles tiles (Aluminium sheet) 60 x 60 cm (Sixty into sixty centimetre) powder coated G.I. channel frames work fixed/Hanging with wall or ceiling with specified clamps and G.I. wire mess rawl plugs etcetera complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles up to any girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) upto floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plaster in single coat on fair side of brick/ concrete /stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles uo to any girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles up to any girth and finished even and smooth with cement mortar 1:5 (One cement: Five sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles uo to any girth and finished even and smooth with cement mortar 1:3 (One cement: Three sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plaster in single coat fair side of brick/concrete/stone walls for external plastering having 25 mm (Twenty five millimetre) wide & 12 mm (Twelve millimetre) deep groove in plaster @ 30 cm (Thirty centimeter) C/C in cement mortar 1:5 (One cement: Five sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Distempering (two or more coats) with oil bound washable distemper of Dulux/Apex/Asian Paint of required shade on undecorated wall surfaces to give an even shade including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing wall with Premium exterior paint of Dulux/Apex/Asian paint finish of approved shade exterior grade emulsion on undecorated wall surface (two coat) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt, dust and foreign matteretc. including sand papering smooth complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with premium interior paint of Dulux/Apex/Asian paint on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

White washing with slacked lime on undecorated wall/Ceiling surfaces two coats to give an even shade including thoroghly brooming the surface to remove all dirt, dust, mortar drops and loose scale of lime wash and other foreign matter including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetre) dia chromium plated steel pipe Grab bar Jal/Jaguar/ESS at 78cm (seventy eight centimetres) height with M.S. plate as per the position of seat and wash basin complete etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection with 60 mm (sixty millimetre ) thick interlocking paver blocks of NTC and 23 cm (centimeter) diametre half round pipe for drainage purpose fixed over cement concrete 1:5:10 (one cement is to five sand is to ten graded/crushed stone aggregade) 40 mm (forty millimetre nominal size bdding of pipe including carriage of materialwithin all leads, lifts and other incidentalsThe rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing chlorinated Polyvinyl chloride(CPVC) pipe of lubrizol flow gaurd confirming to IS-15778-2001 for water supply including clamp at one metre spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) , including filling the joints with approved adhesive complete including entire carriage of material within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216 (16mm (Sixteen millimetre) Outer diameter pipe

1620 (20mm (Twenty millimetre) Outer diameter pipe

2025 (25mm (Twenty five millimetre) Outer diameter pipe

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fittings complete including cutting and making good the walls etcetera, including carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216 (One thousand two hundred sixteen)16mm(Sixteen millimetre) nominal bore Equal Tee

1620 (One thousand six hundred twenty)20 mm (Twenty millimetre) nominal bore

2025(Two Thousand Twenty Five) 25 mm (Twenty five millimetre ) nominal bore

Female Elbows 1216 x 15mm (One thousand two hundred sixteen into fifteen millimetre) thread Equal Tee

Female Elbow 1620 x 20 mm (One thousand six hundred twenty by twenty millimetre) thread

Female Elbow 2025 x 25 mm (Two thousand twenty five by twenty five millimetre) thread

Male Connector 1216 x 15mm (One thousand two hundred sixteen into fifteen millimetre) thread

Male connector 1620 x 20 mm (One thousand six hundred twenty by twenty millimetre) thread

Male connector 2025 x 25 mm (Two thousand twenty five by twenty five millimetre) thread

G.I/M.I. Union 15mm (Fifteen millimetre) Diametre

G.I/M.I. Union 20 mm (Twenty millimetre) Diametre

G.I/M.I. Union 25 mm (Twenty five millimetre) Diametre

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40 mm (Twenty millimetre to Forty millimetre)nominal bore by providing and fixing tees including cutting and threading the pipe complete including entire carriage of material within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred Ten millimetre) nominal bore/diametre (4.6 mm thick (Four point six millimetre) thick PVC pipe in trenches class "A" of Supreme /Finolex of high pressure PVC Spigot & socket soil waste and ventilating pipe fixing with approved adhesive mixure including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) nominal bore/diametres (2.7 mm thick (Two point seven millimetre) thick PVC pipe in trenches class "A" of Supreme /Finolex of high pressure PVC Spigot & socket soil waste and ventilating pipe fixing with approved adhesive mixure including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC Clamps ISI marked of approved design with steel screws and rawl plugs etcetera complete within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing PVC plain bend ISI marked of supreme/Finolex/Prince including fixing with approved adhesive etcetera complete as directed by the Engineer-Incharge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing PVC tee of supreme/Finolex/Prince medium class ISI marked including fixing with approved adhesive complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing PVC heal rest of Supreme Finolex including fixing joints with approved adhesive mixure complete as directed by the Engineer-Incharge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing PVC collar of Supreme/Finolex including fixing with approved adhesive mixure complete as directed by the Engineer-Incharge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing PVC door bend of supreme/Finolex with oval access door, insertion rubber washer 3mm (Three millimetre) thick with bolts and nuts complete including fixing with approved adhesive etcetera complete as directed by the Engineer-Incharge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing 110 x 90 mm diametre (One hunderd ten into Ninety millimetre) PVC floor trap of Supreme/Finolex ISI marked of Self cleaning design including filling the joints with approved adhesive mixure complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC Double equal branch of supreme Finolex with oval access door of insertion rubber washer 3mm thick with bolts and nuts complete including fixing with approved adhesive and carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) diametre

75mm (Seventy five millimetre) diametre

Providing and fixing 110 mm dia (One hunderd ten millimetre) PVC P or S trap for water closet (squatting pan) ISI marked including jointing the trap with pan and PVC pipe with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing W.C. (Universal) Pan No. 2061 of Snow white shade having size (57x46x40mm) (Fifty seven into Forty six into Forty millimetre) of Cera/Hindware vitrious china wash down water closet (European type W.C. pan) with internal P or S traps including jointing the trap with pan and soil pipe in cement mortar 1:1 (One cement : One sand) complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china water closet squatting pan of HINDWARE/CERA of snow white shade (Indian type W.C. pan) size 58x44cm (fifty eight into forty four centimeter) orissa pattern Pan No. 2071 (earth work, bed concrete, foot rest and trap to be measured and paid for separately) complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 10.00 ltr. (Ten litre) net capacity Low level coloured/white dual flushing cistern No. 2603 of Cera/Hindware with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same (over flow pipe to be measured and paid for separately)including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel sink No CKSP 215 of size 57x45cm (Fifty seven into forty five centimetre) nominal size with bowl depth of 22cm (Twenty two centimetre) of Cera/Diamond/Hindware of approved standard with drain board and C.P. waste and C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash down water closet (European type W.C. pan) No. 7011 of 50 cm (fifty centimetre) height of Cera/Hindware with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) for person with disability including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing viterous china wash basin of Hindware/Cera CRANE No. 7707 (45x30) cm (Forty five into thirty centimetre) of snow white shade with single hole for tap with pedestal and C.I. or M.S. bracket painted white including cutting holes and making good the same complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing in position with clamps 32mm (Thirty two millimetre) nominal size internal diametre PVC flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat (solid) type and cover cera/Hindware for wash down water closet with C.P. brass hinges and rubber buffers (snow white shader seat and cover) complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing viterous china flat wash basin of Hinware/cera Canon No. 1012 of snow white shade having size 450x350mm (Four hundred fifty into three hundred fifty millimetre) vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel Kitchen sink No NCKS 313 in size 100x51x20cm (One hundred into fifty one into twenty centimetre) of Cera/Diamond /Hindware with drain board and C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetre) diametre rubber plug for wash basin (Heavy duty makes ISI marked) including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetre) diametre M.I. union of Jal/ESSESS/Jaguar for wash basin or sink.complete, including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetre) diametre PVC ISI marked Jal/ESS/ESS for wash basin or sink including brass check nut complete, including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) diametre C.P. Grating of Jal/ESS/ESS (Heavy duty makes ISI marked for gully floor or Nahni trap including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetre) beveled edge mirror or superior glass of Modi Gaurd/Atul mounted on 6mm (Six millimetre) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass and screws and washers including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty millimetre) C.P. brass Towel rail ISI marked of Jal/ESS ESS /Jaguar complete with C.P. brass brackets fixed to wooden plugs with C.P. brass secrws including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into One hundred twenty millimetre) glass shelf of Jal/Jaguar/ESS ESS (Heavy duty makes ISI marked) with C.P brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws including entire carriage of material within all leads, lifts and other incidentals, as per specifications approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder of Heavy duty make ISI marked of Jal/ESS ESS/Jaguar including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Chromium plated Jet spray of approved quality and ISI marked of Jal / ESS ESS/Jaguar of approved quality and colour with one metre tube complete including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore chromium plated PTMT push cock tap ISI marked of Jal / ESS ESS/Jaguar complete including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore chromium plated ISI marked fancy bib tap with capstan head of ISI marked of Jal / ESS ESS /Jaguar including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass pillar tap with capstan head IS marked of Jal/ESS ESS/Jaguar t including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diametre chromium plated brass angle valve without nuts IS marked of Jal/ESS ESS/Jaguar including entire carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel ISI marked of Jal/ESS ESS/Jaguar including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) nominal bore

20mm (Twenty millimetre) nominal bore

25mm (Twenty five millimetre) nominal bore

Providing and fixing 15mm (Fifteen millimetre) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetre) length including entire carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. SINTEX water storage tank (Tripple Layer) having capacity 1000 (One thousand) liters ISI 12701 marked with G.I. inlet and outlet connection, 15mm (Fifteen millimetre) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level within all leads, lifts of material and other incidentals.The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying to level or slopes 160 mm (One hundred sixty millimitre)internal diametre PVC Pipe 8mm thick of Supreme /Finolex/Prince grade A for sewerage line including testing of pies and joints complete within all leads, lifts of material and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer- Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor 20 mm(Twenty millimetre) Nominal bore galvanised mil steel tube of Jindal/Tata(Medium Grade) fixing with clamps including making good the wall, ceiling and floor etcetera complete as per specifications,approved drawing, design including carriage of material within all leads, lifts and other incidentals . The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing one H.P (Horse power) water lifting pump (Tulu pump) of kirloskar/ crompton with necessary fittings including carriage of material within all leads, lifts and other incidentals . The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (One cement : Five sand :Ten graded crushed stone aggregate 40mm (Forty millimetre) nominal size) bedding for PVC pipe of the 160mm (One hundred sixty millimetre) internal diametre including carriage of material testing of pipes and joints complete within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty millimetre nominal size) inside plastering 15mm (Fifteen millimetre) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) finished smooth complete including curing and testing.Inside size 800x800mm (Eight hundred into Eight hundred millimetre) and 500mm(Five hundred millimetre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten millimetre) internal dimensions.Total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals as per specifications approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty millimetre nominal size) inside plastering 15mm ( Fifteen millimetre) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) finished smooth including curing and testing. Inside size 800x800mm (Eight hundred into Eight hundred millimetre) 1.00 mtrs(One metre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten millimetre) internal dimensions.Total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing chamber 300x300mmx500mm (Three hundred into Three hundred into Four hundred millimetre) inside size for stop cock with C.I. surface box 100 x 100 x 75 mm (One hundred into One hundred into seventy five millimetre) inside with hinged cover fixed in cement concrete slab 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetre nominal size) 75 mm ( Seventy five millimetre) thick foundation concrete 1:5:10 (One cement: Five sand: Ten graded crushed/broken stone aggregate 40mm(Forty millimetre nominal size), inside plastering 15mm ( Fifteen millimetre) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement with 100 mm(one hundred millimetre cast insitu plain cement concrete walls in cement concrete 1:2:4 mix with form work complete including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) nominal bore peet valve ISI marked including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing manhole cover cast iron with frame. The weight of cover with frame should be 38 Kgs (Thirty eighty kilograms) weight of cover should be 23 kgs (Twenty Three Kilogram) and weight of frame 15 kgs (Fifteen Kilograms) complete within all leads, lifts and other incidentals, as per specifications,approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Ujjawal Singh

M/s Surindera Traders

Prashanti Surya Construction Company