Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.1 LAccepted-Finance | ₹13.1 L | L1 | Accepted-Finance admiited vide commitee resolution 2 dated 06/07/2026 |
| 2 | L2₹13.6 L+₹58,178 (4.45%)Rejected-Finance | ₹13.6 L+₹58,178 (4.45%) | L2 | Rejected-Finance higher rate hence rejected |
| 3 | Rejected-Technical | - | - | Rejected-Technical higher rate hence rejected |
| Sl No | Description | Qty | Unit | AMBADI CONTRACTS L2 | SHIBU S V L1 | Sreekrishna Constructions L3 |
|---|---|---|---|---|---|---|
| 1.00VellanikkalAnganwadi | ||||||
| 1.00 | 50.6.3.1:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete | 7.11 | cum | 6,945.76 ₹49,384.35 | 6,649.54 ₹47,278.23 Lowest | 7,700 ₹54,747 |
| 1.00 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). | 139.5 | sqm | 322.07 ₹44,928.77 | 308.33 ₹43,012.04 Lowest | 350 ₹48,825 |
| 1.00 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 141.75 | sqm | 190.6 ₹27,017.55 | 182.47 ₹25,865.12 Lowest | 200 ₹28,350 |
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 325 | kg | 162.51 ₹52,815.75 | 155.58 ₹50,563.5 | 150 ₹48,750 Lowest |
| 1.00 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | 3 | sqm | 229.39 ₹688.17 | 220.2 ₹660.6 | 200 ₹600 Lowest |
| 1.01 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 12 | kg | 532.56 ₹6,390.72 | 509.85 ₹6,118.2 Lowest | 550 ₹6,600 |
| 1.01 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 12 | kg | 645.07 ₹7,740.84 | 617.55 ₹7,410.6 Lowest | 700 ₹8,400 |
| 1.01 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 6 | sqm | 1,102.3 ₹6,613.8 | 1,055.29 ₹6,331.74 Lowest | 1,200 ₹7,200 |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 6 | sqm | 1,164.74 ₹6,988.44 | 1,115.07 ₹6,690.42 Lowest | 1,300 ₹7,800 |
Tender Value
₹15.3 L
EMD Value
₹38,275
Closing Date
1 Jun 2026, 6:00 pmClosed
ASSISTANT ENGINEER ,MANICKAL GP
ASSISTANT ENGINEER ,MANICKAL GP
MANICKAL GP MAINTENANCE OF VARIOUS ANGANWADIES IN MANICKAL GP-97/26
2026_LSGD_852759_1
1/AE/LSGD/MKL/2026-27
Open Tender
Civil Works - Buildings
Item Rate
MANICKAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹38,275
Yes
31 Jul 2026
25 May 2026
3 Jun 2026
25 May 2026
1 Jun 2026
25 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1VellanikkalAnganwadi | |||||
| 1.001 | 50.6.3.1:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete | - | cum | - | - |
| 1.002 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). | - | sqm | - | - |
| 1.003 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | - | sqm | - | - |
| 1.004 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | - | kg | - | - |
| 1.005 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | - | sqm | - | - |
| 1.006 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | - | kg | - | - |
| 1.007 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | - | kg | - | - |
| 1.008 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | - | sqm | - | - |
| 1.009 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | - | sqm | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1440944.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.37 MB
Tendernotice_2.pdf
PDF • 0.24 MB
Tendernotice_3.pdf
PDF • 0.29 MB
BOQ_1440944.xls
BOQ • 0.34 MB
preag.pdf
Tender Documents • 0.30 MB
viewsbd.pdf
Tender Documents • 1.63 MB
tndrfrm.pdf
Tender Documents • 0.29 MB
aff.pdf
Tender Documents • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .