Supply, installation, testing, and commissioning of 10-Passenger LIFT in the Dept. of Instrumentation, CUSAT, Thrikkakara Campus

10- Passenger Lift (G+4)

Supply, Installation, Testing and commissioning of 10- Passenger Lift (G+4) Technical Specifications Quantity - 1 unit Type of Elevator: MRL Elevator, Capacity of the Elevator : 680 kg/ 10 Passenger, Speed (Min) : 1.0 m/s Type of drive : V3F or equivalent, Type of control system : Integrated controller with Automatic Rescue Device(ARD) Power Supply : 440V,Three Phase,50Hz Travel Distance : 12 Meters (approx), Overhead Distance : 4.50m, Number of Floors to be Served : G,1,2,3,4 Number of Landing Entrances : 5, Number of Landings : 5 (All Openings are same side) Size of the lift Well Available : 1900 mm W x 1900 mm D, Lift pit depth : 1.50m Lift car in side size : Minimum 1300mmx1300mm Lift car Finish for walls : Stainless Steel Hair line finished Type of Car Door : Stainless Steel Hair line finish framed glassdoor (Full vision) Type of Landing Door : Stainless Steel Hair line finish framed glassdoor (Full vision) Type of car door Protection : Full length Infrared SENSOR Clear Car Door Opening : 800 mm (W) x 2000 mm (H)Automatic CentreOpening Special Door Control System :Infra red Control Protection System Lift car ceiling & lighting : LED light for power saving ARD Car operating panel : Bank of call buttons corresponding to landings served. Emergency light & bell. full length IR sensor, Blower faninside cabin, etc Well light wiring : including LED fittings and wiring from Lift panel to the lights (minimum 5Nos) Minimum 16A power socket with wiring and control switch should be provided in an adequate location The car flooring should have a good finish, be easy to clean, and have an attractive appearance The work includes all the necessary works for successfull installation and to get approval from kerala electrical inspectorate including documentation. Lift panel is already available in the site. Comprehensive Warranty : Minimum 2 years Make: Schindler, Kone , Otis , Mitsubishi , Fujitech , TK Elevator, Kinetic Hyundai

Statutary fees to get approval from Kerala Electrical Inspectorate (Will be Reimbursed against the original challan from electrical inspectorate)

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 6 sq mm with factory made clamp

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 6 sq. mm (19mm)

Supply and installation of 12 pole copper bonded earth bench on wall or panel or suitable location as per the direction of Engineer in charge

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15 mm copper conductor ( 10 SWG)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required. 3.15 mm (10 SWG)