C/O CHC Marhi in Tehsil Dharampur Distt Mandi

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

In foundation,footings bases of columns etcetera for mass concrete.

In flat surfaces such as soffits of suspended floors, roofs, landings balconies and access platform and the like floor upto any thickness upto all floor levels.

In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels

In columns, pillars,piers, abutments posts and struts square rectangular or polygonal in plan upto all floor level.

Stair Case with sloping or stepped soffits excluding landing except spiral stair upto all floor level.

Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses plinth and string courses etcetra and the like in all floor heights.

In edges of slabs and breaks in floors and walls under any width/ height upto all floor level.

Providing and laying mechanically mixed cement concrete 1:3:6 (One cement: three sand: six graded/crushed stone aggregate 20mm (Twenty millimetre) nominal size as per specification and curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specification and curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:6:12(One cement:six sand: twelve graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specification and curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed 1:5:10 (one cement :five coarse sand : ten) graded crushed stone aggregate 40 mm(forty millimetres) nominal size cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to all floor /height excluding the cost of centering, shuttering and finishing in all respect including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing weep holes in brick masonry/stone masonry, plain / reinforced concrete abutment, wing walls, return walls, retaining walls and Breast walls with 110mm (One hundred ten millimeter) diameter PVC Pipe made of D-plast finolex having working pressure not less than 4.50 Kg P/Sq cm (four point five Killogramme per Square centimetres) extending through the full width of structures with slope of 1 one (Vertical) : 20 ( Twenty) (Horizontal) towards drawing face complete as per drawing and technical specifications clauses 614, 709, 1204.3.7 including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying damp proof course 40mm (Forty milimetres ) thick with cement concrete 1:2:4 ( One cement : two sand : four graded crushed stone agregate 12.5mm ( Twelve decimal five milimetres ) nominal size curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Applying a coat of residual petroleum bitumen of grade of VG-10 (ten) of approved quality using 1.7kg (One point seven) Kilogramme per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of cement concrete mechanically mixed 1:2:4 (one cement : two coarse sand : four graded crushed stone aggregate 20 mm (twenty millimetres) nominal size) all work up to plinth level excluding the cost of centering, shuttering, including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of reinforced cement concrete mechanically mixed 1:2:4 (one cement : two coarse sand : four graded crushed stone aggregate 20 mm (twenty millimetres) nominal size) all work up to plinth level excluding the cost of centering, shuttering, finishing and reinforcement including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Reinforced cement concrete mechnically mixed and vibrated in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto excluding cost of centring shuttering finishing and reinforcement 1:1.5:3 ( one cement : one and half course sand : three graded crushed stone aggregate 20 mm (twenty millimetres) nominal size) to all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Reinforced cement concrete mechnically mixed and vibrated in reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen) Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement 1:1.5:3 ( one cement : one and half course sand : three graded crushed stone aggregate 20 mm (twenty millimetres nominal size) with minimum cement concrete 400 kg ( four hundred kilograme) per cubic metre including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing, hoisting and fixing above plinth level up to all floor level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded crushed stone aggregate 20 mm nominal size). including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed and vibrated design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work,to obtained minium crushing strength of 25N/mm2 (Twenty five ) Netwon per millimetres square) with minium cement contents of 425Kg/Cum (Four hundred twenty five killogramme per Cubic metres) using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

All works upto plinth level.

All works above plinth level upto all floor level.

Providing and laying Mild steel and Medium Tensile steel bars Fe 500D made of SAIL,TISCO, TATA, JINDAL, RINL, PANTHER & (JSPL) Shyam steel for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Mild steel and Medium Tensile steel bars Fe 500D made of SAIL,TISCO, TATA, JINDAL, RINL, PANTHER & (JSPL) Shyam steel for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete above plinth level upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five) in foundation and plinth level in cement mortar 1:6 (one cement : six coarse sand) curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five) in superstructure above plinth level upto all floor level in all shapes and size in cement mortar 1:6 (one cement : six coarse sand) curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement Mortar 1:3( One cement: three coarse sand) and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in superstructure above plinth level up to all floor levels in Cement Mortar 1:3( One cement: three coarse sand) and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded crushed stone aggregate 20 mm ( twenty millimetre) nominal size upto plinth level with cement mortar (1:6) (One cement : six coarse sand) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying 20 cm. thick composit stone masonry in cement mortar 1:6(1 cement :6 sand) and concrete backing with cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm. nominal size) upto plinth level on inner face of walls including centring,shuttering and propping including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government..

Providing and laying 20 cm. thick composit stone masonry in cement mortar 1:6(1 cement :6 sand) and concrete backing with cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm. nominal size) above plinth level upto all floor level on inner face of walls including centring,shuttering and propping complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Precast concrete solid block masonry in partition walls 10 cm.(Ten) centimetres thick with hollow block of approved size including quion blocks, jamb blocks, closer etc. made of cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 20mm (Twenty) millimetres nominal size upto plinth level with laid with cement mortor 1:4( One cement into four sand) and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Precast concrete solid block masonry in partition walls 10 cm.(Ten) centimetres thick with hollow block of approved size including quion blocks, jamb blocks, closer etc. made of cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 20mm (Twenty) millimetres nominal size above plinth level with laid with cement mortor 1:4( One cement into four sand) and curing complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Stone filling /Soling under floors tightly hand packed upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Filling with brick agreegate in soak pit complete consolidating and dressing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) nominal dia chromium plated brass curtain rod having wall thickness of 1.25mm (One point two five) millimetres with two chromium plated brass brackets fixed with C.P. Brass screws and PVC sleeves etc., upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 300×16mm (Three hundred into sixteen millimetre) nominal size aaluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. TThe rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

250x10mm (Two hundred fifty into ten millimetres)

150x10mm (one hundred fifty into ten millimetres)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

125mm (one hundred twenty five millimetres)

100 mm (one hundred millimetres)

Providing and fixing 100 mm (hundred millimetre) bright finished drawn hooks and eye including entire carriage of materials upto all leads and lifts. The rates are inclusive of royality, GST or other taxes imposed by the Government

Providing and fixing aluminium hanging floor door stopper ISI marked (anodic coating not less than grade AC10 (ten) as per IS:1868) transparent and dyed to required colour and shade with necessary screws etc. complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 150 mm ( one hundred fifty millimetres ) oxidized M.S. double acting spring hinges with necessary screws etc. complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 19(Ninteen) millimetres thick termite resistant water proof Commercial Board shutters with hard wood edging and confirming to IS- No.1659 of NOVAPAN , ARCHIDPLY, ACTION TESA,GREEN,NATIONAL,KITPLY make shutters i/c fixing with nickel plated piano hinges with screws etc and PGI sheet linning inside complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing ISI marked 35 mm (thirty five millimetre) thick stainless steel butt hinges with necessary screws flush door shutters conforming to IS : 2202(Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters made of kitply kutty flush door, kitply industries (swastik) Jawala Samrat Laminate Pvt. Ltd. (Samred) CNC commercial ltd (Shivalik) SR Jindal Ply wood Industries (Prima) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing(SINGLE REBATE DOOR FRAME) door frame fabricated from sections roll formed out of 1.2 mm (one point two millimetre) thick galvanized steel (Base steel as per IS 513) with zinc of 120 gms/sqm (one hundred twenty gram per square metre). The overall size of section should be 80x50 mm (eighty into fifty millimetre) and 105x60 mm (one hundred five into sixty millimetre) with rebate of 37 mm (thirty seven millimetre) for shutter. The frame section should be cut to length and metre joint with corner bracket made of CRCA electroplated. The frame should be provided with 3 number of M.S. powder coated 4" (four inch) butt hinges of 2 mm thickness welded to frame and 6 number of 1.2 mm thick CRCA electroplated stiffeners should be welded to frame and 6 number 8" (eight inch) MS holdfasts with spilt end tail welded to stiffeners plates and 1 number aldrop receiver. Each frame should be provided with 25x50 mm tie rod at bottom. All welded places should be treated with protective coat of zinc rich primer. The entire frame should be provided with a coat each primer complete and carriage of material within all leads, lift upto all floor levels and otheer incidental chaarges complete in all respects as per direction and satisfaction of Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriatedimension (Area of window upto 1.75 sqm)including entire carriage of material with in all leads lifts upto all floor levels and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±.0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account) including entire carriage of material with in all leads lifts upto all floor level and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Glazing with glass panes of 5.50mm(five point five zero millimeters) thickness (weight not less than 13.75 kg/sqm.)( thirteen point seven five killogramm) including entire carriage of material with in all leads lifts upto all floor level and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections,, made of Tata, Jindal, trusses and trussed, in purlins in building framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including entire carriage of material with in all leads and lifts upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Steel work welded in built up sections,, made of Tata, Jindal, framed work including cutting hoisting, fixing in position using structural steel etc. as required In Grating frames, guard bar, ladder railing, brackets, gates and similar work. and applying a priming coat of approved steel primer all complete. including entire carriage of material with in all leads and lifts upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing M.S. fan clamp type I or II of 16 mm ( One or two of sixteen) millimetres dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete including entire carriage of material with in all leads and lifts upto all floor level and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying 10mm thick Full body vitrified floor tiles of size 600x600 (Six hundred into six hundred millimeters) with water absorption less than 0.08% and conforming to IS: 15622, of approved make Somany/Kajaria/Nitco /Orient RAK, Johnson & Johnson) in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three killogramm per square meters) including grouting the joints with white cement and matching pigments etc., complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and Fixing Anti-Skid Full body vitrified floor tiles( With VC shield Technology) of size 605x605 (six hundred five into six hundred five millimeters) (of approved shade and pattern) of duragress of Somany/Kajaria/Nitco /Orient/ RAK, Johnson & Johnson as per the drawing with water absorption less than 0.08% (zero point zero eight) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimeters) thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(three point three killogramm per square meters) including grouting the joints with white cement and matching pigments etc., complete. complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying 10mm thick of size 60x60cm (sixty into sixty centimeters) Antistatic Vitrified Tiles to provide antistatic-conductive, abrasion resistant, hard wearing and laveled floor in Asc Blue colour suitable for the specified use laid on the existing floor with proper application process. The Antistatic Conductive rectified vitrified tile with all punched corners of make H&R Johnson india/ORIENT/ RAK/ KAZARIA/ NITCO ,RAK, Johnson & Johnson should have surface electrical resitance- Conductive less than 1 Mega Ohm with static decay time less than 0.5(zero point five) Seconds and area of each tile should be 0.36 sqm (zero point Thirty six square meter) . The tiles should be fixed using tile adhesive Tiles suitable to fix Antistatic Vitrified in minimum 6 mm (six millimeters) thick bed and by leaving a space of minimum 5mm (five millimeters)around each tile with the help of + shaped PVC Spacer suitable to leave a grove of 5mm (five millimeters) around all four sides of each tile. After curing of minimum 24 hours, prepare a grid of 18 (Eighteen)gauge anilated pure copper wire around all four sides of antistatic conductive endura tiles. wire should be fixed in the form of grid, all crossings should be jointed and one end of wire should be fixed in the form of grid, all crossings should be jointed and one end or wire should be fixed with the earthing point of the room with the help of bus bar. All the groves then should be properly filled with the black coloured antistatic epoxy grout spectrum-ASEG and all the four punched corners of all the tiles should also be filled with the same antisatic grout spectrum-ASEG and allow to cure and complete the work in all respects and to the entire satisfaction of the Engineer-in-charge. required upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and Fixing Anti-Skid Full body vitrified floor tiles of size 300x300 (three hundred into three hundred millimetres)(of approved shade and pattern) of duragress of Somany/ Kajaria/ Nitco /RAK, Johnson & Johnson as per the drawing with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three killogramm per square meter) including grouting the joints with white cement and matching pigments etc., complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm (three hundred into three hundred into nine point eight millimeters) having with water absorption less than 0.5% and conforming to IS: 15622 of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm (twenty millimeter) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson with 18 mm (eighteen millimeter)thick stone slab over 20 mm (twenty millimeter) (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Polished Granite stone skirting in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson with 18 mm thick stone slab over 20 mm (twenty millimeter) (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Polished Granite stone Tiles in skirting or Dado in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnsonwith 10 mm (ten millimeter)thick of size 300x600 (three hundred into six hundred millimetre) stone slab over 20 mm (twenty millimeter)(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete upto all floor level as specified Polished Granite stone Tiles jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government..

Providing Moulding to 25mm twenty five millimeter) of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson(average) thick and 50mm (fifty millimeter) wide granite stone counters, vanities etc. including machine polishing to edge to give high gloss finish et. Complete upto floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and Fixing Anti-Skid Full body vitrified floor tiles( With VC shield Technology) of size 605x605 (six hundred five into six hundred five millimetre)(of approved shade and pattern) of duragress of Somany/Kajaria/Nitco /Orient RAK/Johnson & Johnson with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimeter)thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three poitn three killogramm per square meter) including grouting the joint with white cement & matching pigments etc. complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government..

Providing and laying Digital Tiles of size 30x60 mm (thirty into sixty millimeter) (thickness to be specified by the manufacturer )of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three poitn three killogramm per square meter)including pointing in white cement mixed with pigment of matching shade complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government..

Providing and laying digital ceremic glazed tiles 10mm (ten millimeter) thick of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson in flooring (300x600x10mm size)( three hundred into six hundred into ten millimeter) treads of steps 1.50m (one point five zero metre) high tiles in dada. Laid on a bed of 12mm. (twelve millimetre)Thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement complete upto all floor level l including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Rough finished Granite stone flooring of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson in desgn and patterns, in landing of stair as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (twenty millimetre)(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete upto all floor level as specified and as directed by the Engineer-in-Charge Rough finished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government..

Providing and laying cobble stone of approved quality and shade in flooring 100x100x80mm ( one hundred into one hundred into eighty millimetre)thick on 20mm (twenty millimetre) average thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of cobbles including rubbing and granite finish complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying 20mm ( twenty millimetre)thick rough finished 50mm wide flaming bend near semi round nosing in the tread of stair. Complete upto all floor level as per design approved by the Engineer-in-Charge including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government..

Providing and laying 20mm (twenty millimetre) thick polished granite stone slab in riser of stair as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm (twenty millimetre) thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete upto all floor level as specified and as directed by the Engineer-in-Charge polished granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government..

16mm thick full body vitrified tile 450x450mm ( forty five into forty five millimetre )Exterior grade shade and colour in flooring laid over 8 mm thick cement mortar 1:3 (one cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying 10mm thick of size 60x60cm ( Sixty into sixty centimetre)Antistatic Vitrified wall Tiles in Dado or skirting to provide antistatic-conductive, abrasion resistant, hard wearing and laveled floor in Asc Blue colour suitable for the specified use laid on the existing floor with proper application process. The Antistatic Conductive rectified vitrified tile with all punched corners of make H&R Johnson india/ORIENT/ RAK/ KAZARIA/ NITCO should have surface electrical resitance- Conductive less than 1 Mega Ohm with static decay time less than 0.5 Seconds and area of each tile should be 0.36 sqm. The tiles should be fixed using tile adhesive Tiles suitable to fix Antistatic Vitrified in minimum 6 mm thick bed and by leaving a space of minimum 5mm around each tile with the help of + shaped PVC Spacer suitable to leave a grove of 5mm around all four sides of each tile. After curing of minimum 24 hours, prepare a grid of 18 gauge anilated pure copper wire around all four sides of antistatic conductive endura tiles. wire should be fixed in the form of grid, all crossings should be jointed and one end of wire should be fixed in the form of grid, all crossings should be jointed and one end or wire should be fixed with the earthing point of the room with the help of bus bar. All the groves then should be properly filled with the black coloured antistatic epoxy grout spectrum-ASEG and all the four punched corners of all the tiles should also be filled with the same antisatic grout spectrum-ASEG and allow to cure and complete upto all floor level the work in all respects and to the entire satisfaction of the Engineer-in-chargeincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing stainless steel knock down railing of kich AISI 316 of 38mm. Dia handrail fixed on 10x50mm ( ten into fifty millimetre) S.S. flat baluster (Design code DT53-2-163) placed at 1200 C/C along with 3 Nos @ 16 mm Mid rails connected at the side of baluster with fixtures the balustrade would be fixed on to floor with casted base plate of minimum 6mm thickness base plate shall be concealed with suitable S.S. 316 grade cover cape railing height to be taken @ 85mm from floor level upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing prepainted sandwich made of tata dura shine in roofing with hot dipped of 0.60 (Zero point six zero) millimetres thick rock wool and interior skin of 0.50 ( Zero point five zero) millimetres prepainted steel sheet steel frames are to be painted of approved shade i/c fixing with screws prepainted iron J or L hooks, bolts and nuts with prepainted limpet and rubber washers complete with all accesories as required as per the specification and direction of Engineer-in charge upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60(sixty)centimetres overall with prepainted steel sheet made of tata dura shine steel sheet roofing with hot dipped of 0.60 (zero point sixty) millmetres thick i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm (six millimetre) dia metre with prepainted limpet G.I. metalic zink coated sheet with top cover regular polyster (RNP) organic coating of 20 (twenty) micron over 5(five) micron primer coating to back coat of polyster of 5 (five) micron over 5 (five) microns primer coating and rubber washers complete with all accesories as required upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing valley 90(Ninety)centimetres overall with prepainted of tata dura shine steel sheet roofing of 0.60 (zero point sixty) millimtres thick with hot dipped matalic zinc coated sheet with top coat of regular modified polyster orginic coating of back coat of polyster of 5 (five) microns over 5 ( five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts with prepainted limpet and rubber washers complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing flushing 38cm(Thirty eight centimeter) overall with 0.60mm ( Zero point six milimetre)thick pre painted sheet made of tata durashine in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester organic coating of 20 microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5(Five) microns primer coating i/c fixing with pre painted J or L hooks, bolts and nuts 6(Six milimetre) dia meter & pre painted G.I. limpet & bitumen washers complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing MS BP Sheet 1.66 to 2.00 (One point sixty six to two ) millimetres thick of TATA Dura shine make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per direction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 30(Thirty) Centimetres wide 45 (Foryt five) Centimetres overall semicircular 0.63 (Zero point six three)millimetres thick plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing wind ties of 40x6mm flat iron section complete as per design upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing P.G.I. Sheet bend of required degree (0.63mm thick sheet) for rain water pipeincluding entire carriage of material with in all leads lifts upto all floor level and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm (fifteen centimetre) diameter and weighing not less than 440 grams (four hundred forty gramme) complete upto all floor levels including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government. .

Providing and fixing 110 mm (one hundred ten milimetre) on wall face unplasticised Rigid PVC rain water pipes made of Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion, (i) Single socketed pipes.including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government. .

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals.

Coulper 110mm

110 mm plain bend

110mm dia P.V.C. shoe

Providing and fixing 110mm dia (one hundred ten millimetres)PVC clamps ISI marked of Finolex Supreme, AKG, Prince, Kisan, SFMC, Diplast make of approved design with steel screws and rawal plugs etc. Complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing fibre board ceiling tiles cement false ceiling tiles of size 600x600mm (six hundred into six hundred millimetre) over ready made powder coated material sheet section frame work 600mm (six hundred millimetre) c/c grid suspended from ceiling of Evrest / Dexune / Aeolite/Gyproc or its equivalent with butterfly clips and hinges etc. as required pattern complete in all respect upto all floor level as per specification and the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incientals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing DEXUNE/HunterDuglas /Saint Gobain false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams / sqm. Both side inclusive) consisting of main “T” runner with suitably spaced joint to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 and size 24x25 mm made of 0.30mm (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grid of 600x600 mm and wall angle of size 24x24x0.3 mm and lying false ceiling tiles of approved texture in the grid including, required cutting /making , opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm GI adjustable road with galvanized butterfly level clips of size 85x30x0.8mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all height as per specifications, drawings and as directed by Engineer-in-charge. GI Metal ceiling lay in perforated tegular edge global white color tiles of size 595x595mm and 0.5mm thick with 8 mm drop made of GI sheet having galvanizing of 100gms/sqm(both side inclusive) and electro statically polyester powder coated of thickness 0.60 microns (minimum) including factory painted after sending as per specfication upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 1st quality GRC/Unistone wall cladding conforming to IS:15622 (thickness to be specified by the manufacture) of approved make in all colours shades except burgundy, bottle green black of any size as approved by Engineer-in-charge. In skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (one cement : three sand)and jointing with grey cement slurry @ 3.3 kg per sqm. including pointing in white cement mixed with pigment of matching shade complete upto all floor level including entire carriage of materials with in all leads and lifts and technical as per specfication upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

15 mm (fifteen milimetre) cement plaster on the fair side of single or half brick wall of mix 1:6 (one cement : six fine sand) complete upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

15 mm (fifteen milimetre) cement plaster on the rough side of single or half brick wall of mix 1:6 (one cement : six fine sand) complete upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

15 mm (fifteen milimetre) cement plaster on the rough side of single or half brick wall of mix 1:3 (one cement : three fine sand)complete upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

6 mm (six milimetre)cement plaster of mix: 1:3 (one cement : three fine sand) complete upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

6mm (Six millimetre) thick Barium sulphate plaster with mix 1:1:2 ( One cement : one barium sulphate : two sand) upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

15mm ( fifteen millimetre) thick Barium sulphate plaster with mix 1:1:2 ( One cement : one barium sulphate : two sand) upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Finishing walls with Two or more coat applied @ 3.84 Kg/10 sqm (three point eight four kilograme per ten square metre) of required shade preparation of surface, etc. complete on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Wall painting with premium emulsion paint of approved brand and manufacture ICI (Dulux Gloss, Nerolac, Berger ( Luxal High Gloss) Asian Paints ( Premium Apcolite Gloss Shalimar to give an even shade : Two or more coats on new work upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Wall painting with acrylic emulsion paint of approved brand and manufacture Nerolac, Berger ( Bison Acrylic) Asian Paints ( Trector Acrylic Shalimar to give an even shade : Two or more coats on new work upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer JK wall putty/ Birla white Putty make over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Applying painting one or more coats of oil type wood preservative of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make on new wood surgace after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine liters per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five liters per ten square metre) of approved brand and manufacture of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make including cleaning of all dirt, dust and other foreign matter sand papering and stopping complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine liters per ten square metre)over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eight liters per ten square metre) of approved brand and manufactureICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar make including cleaning the surface of all dirt dust and other forign metter complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying water proofing treatment, by applying cement slurry mixed with water proofing cement compound of Dr.Fixit Padfin or equivalent consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm. Mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hour. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063.) Wall Joint of 100 mm gap upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

35mm thick Lead Lined Door-Double Lead flush door with 1.5mm lead sheet (Made out of 99.9% pure refined lead ingots) lining with liminate (century/ greenlam/ equivalent) upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing under layer for plinth protection of 75 mm (Seventy five millimeters) thick (unconsolidated) bed dry brick/stone aggregate 40mm (Forty millimeters) nominal size with well rammed and consolidated and grouted with fine sand including preparation of ground complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Making plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand (zone - III) : six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) over 75 mm(seventy five millimetres) thick bed of dry brick bllast 40 mm(forty millimetres) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and derssing and finishing the top smooth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Constructing Coursed rubble hammer dressed 'U' shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter ) in cement mortar 1:6 ( One Cement : Six approved Sand) and inside plastering with cement mortar 1:3 (One Cement: Three approved Sand) including earth work and laying 10 cm (Ten Centimatre ) cement concrete in 1:5:10 (One Cement : Five approved Sand : Ten graded crushed stone aggregate) of 40 mm (Forty millimetres) nominal size and 7.5 cm (seven Point Five Centimatre ) cement concrete 1:2:4 (One Cement : Two approved Sand : Four graded crushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying G.I. pipes complete with G.I. fittings including trenching and refilling etc. of B.S.T/ JINDAL(HISAR)/ TATA STEEL TUBE LTD /PRAKASH SURYA tube upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

20mm (Twenty ) millimetres nominal bore

32mm (Thirty two) millimetres nominal bore

15mm ( Fifteen ) millimetres nominal bore

Providing and laying Making connection of galvanised steel distribution branch with galvanised mild steel main 25mm to 40mm (twenty five to forty) millimetres nominal bore by providing and fixing tee make of UniK, KS, AMCO, AVR, NVR, RR, SUW including cutting and threading the pipe complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Fixing water meter and stop cock in G.I. pipe line of including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes KINGSTON /PARKO / TECHNO JAL JAQUAR / GE M/ ESS ESS / SEIKO confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete upto all floor level as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

PN - 16 Pipe, 20mm OD (SDR-7.4)

PN - 16 Pipe, 25mm OD (SDR-7.4)

PN - 16 Pipe, 32mm OD (SDR-7.4)

Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (five hundred eighty into four hundred forty millimetrers) with integral type foot rests water closet squatting pan (Indian type W.C. pan ) of Parryware, Hindware Sanitaryware, Neycer, Cera. make with 100 mm (one hundred millimetrers) sand cast Iron P or S trap, 10 (ten) Litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever equired upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing vitreous china dual purpose closet suitable to use as squitting pan or Europeen Type water closet ( Anglo Indian WC Pan) with seat and lid fixed CP brass hinges and rubber buffers 10 liters low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe with special of standard make and mosquito proof cupling of approved municipal design complete including painting of fitting and brackets cutting and making good the walls and floor whereever required white vitreous china dual purpose WC pan make of Parryware, Hindware Sanitaryware, Neycer, Cera with white china flushing cistern and CP flush bend upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) No.20011 with seat and lid, 10 (ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimetres) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required WC pans with ISI Marked white solid plastic seat and lid of Parryware, Hindware Sanitaryware, Neycer, Cera. make upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing white vitreous china flat black and wash basin size 550mmx400mm (Five hundred fifty into four hundred millimetres) with single with C.I. bracket pair of 15 mm ( fifteen ) millimetre C.P. brass pillar tap 32 mm ( thirty two millimetre) C.P. brass make of standard pattern including painting of fittings and brackets etc. cutting and making good the walls where ever required with C.I. ofHindware/Parryware /CERA, Sanitary ware, Naycer make entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 660 mmx460mm (six hundred sixty into four hundred sixty millimetres) white vitreous china wash basin with pair of 15 mm ( fifteen ) millimetre C.P. brass pillar tap with elveo including oprated 32 mm ( thirty two millimetre) C.P. brass waste of standard pattern cutting and making good of the wall where ever require with CI of Hindware/Parryware /CERA, Sanitary ware, Naycer make upto all floor level including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 56x43cm ( fifty six into forty three centimetre) under counter wash basin Zen Category No. 10049 of Hindware/Parryware /CERA, Sanitary ware, Naycer make upto all floor level including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing white vitreous china pedastal of ( Hindware/Parryware /CERA /sanitary ware,Naycer make) for wash basin complete recessed of the back for reception of pipe and fittings upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing white china range of three urinal basins with 10 (ten litters) white PVC automatic flushing cistern flat beds or wall corner type lipped front urinal basin of 430x 260 x350 mm and 340x410 x265 mm size respectivaly with automatic flushing cistern with standard flush pipe and CP brass spereaders with brass union and G.I. capps complete including painting of fitting and brackets cutting and making the walls and floors good where ever reqired vitreous with 10 (ten) liters urinal of` ( Hindware/Parryware /CERA /sanitary ware,Naycer make) complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) (eighten/eight) kitchen sink size 510 x1040 mm ( five hundred ten into one thousand forty) millimetres bowl depth 250 mm ( Two hundred fifty ) millimetres of AMC, UNIK, DIAMOND, Neelkanth. make as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty millimetres) including painting of fittings and brackets, cutting and making good the walls wherever required upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing white Vitreous China 600x450x200 (six hundred into four hundred fifty into two hundred millimetre) size laboratory sink with C.I. brackets CP brass chain with rubber plug 40 mm (forty millimetres) CP brass waste and 40 mm CP brass trap with necessary CP brass unions complete painted white including cutting holes in walls and making good the same but excluding fittings including the carriage of material within all leads, lifts through all modes of transportation as per direction of the Engineer-in-charge and other incidentals. The rate is includes of octroi, royality, Malkana, toll tax , sale tax or other taxes imposed by the Government.Malkana, toll tax , sale tax or other taxes imposed by the Government.

Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required :White glazed fire clay draining board of size 600x450x 25 mm (six hundred into four hundred fifity into twanty five milimetre) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimetres) dia C.P. / S.S. Jet with flexible tube upto 1.00( one point zero zero) metre long with S.S. triangular plate to Eureopean type W.C. of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko. quality and make upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetre) dia flexible pipe waste pipe for wash basin including including PVC waste fitting complete upto all floor levels The rate is includes of octroi, royality, Malkana, toll tax , sale tax or other taxes imposed by the Government.

Providing and fixing plasticised PVC connection pipe with brass unions 450mm ( four hundred millimetre) length 15mm (fifteen millimetre) nominal size The rate is includes of octroi, royality, Malkana, toll tax , sale tax or other taxes imposed by the Government.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass make of Atul Modi Guard, Golden fish mounted on 6mm (six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washer including the carriage of material within all leads, lifts through all modes of transportation as per direction of the Engineer-in-charge and other incidentals. The rate is includes of octroi, royality, Malkana, toll tax , sale tax GST or other taxes imposed by the Government.

Providing and fixing 600x120 x5 mm(six hundred into one hundred twenty into five millimetre) glass shelf with C.P. brass bracket and quard rail complete with 40mm long screw raw complete fixed with to wooden plugs with C.P. brass screws including the carriage of material within all leads, lifts through all modes of transportation as per direction of the Engineer-in-charge and other incidentals. The rate is includes of octroi, royality, Malkana, toll tax , sale tax or other taxes imposed by the Government.Malkana, toll tax , sale tax or other taxes imposed by the Government.

Providing and fixing toilet paper holder C.P. brass including the carriage of material within all leads, lifts through all modes of transportation as per direction of the Engineer-in-charge and other incidentals. The rate is includes of octroi, royality, Malkana, toll tax , GST, sale tax or other taxes imposed by the Government.

Providing and Fixing Soap dish recessed type stainless steel AHS-1531 of Jaquar or equivalent complete in all respectupto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms of Prayag,Viking, complete in all respectupto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Towel Rack with lower hanger No. AHS-1581H of hotelier series of JAQUAR, or equivalent of superior quality upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Corner glass self with bract No.ACN-1173 of hotelier series of JAQUAR, ESS-ESS of superior quality upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing U shaped wall mounted rail with hings 600x 100 mm ( Six hundred into one hundred millimetre ) Cat No. B2210107 and wall mounted grab bar 600 mm ( six hundred millimetre) long CAT No. B2210106 jaguar or equivalent superior quality complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing C.P. brass long nose bib cock Cat no.CON 107KN of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of approved quality conforming to IS standards. 15 mm (fifteen millimetres) nominal bore upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing Angular stop cock with wall flange of opel prime no. CON 053KN of of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing Concealed stop cock with wall flange of opel prime no. CON 083FTK Stop Cock PM of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko make single control of jaquar or equavalent complete in all respect upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing C.P.Mixer for kitchen sink with casted swinging CON 309KN jaquar or equavalent complete In all respect including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 (one thousand) litre make of sintex net capacity tank , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 25mm nominal bore, weighing not less than 62 gms (sixty two) PTMT extension nipple for water tank pipe, fittings of approved quality and colour make of Prayag, Viking complete In all respect including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetres) high pressure uPVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 110 mm (One hundred ten millimetres) high pressure uPVC spigot and socket, waste and ventilating pipes ISI marked of Finolex make including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing uPVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. With upto all floor level. 110 mm X 90 mm (one hundred ten into ninety milimetres) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing uPVC door bend with ovalaccess door, insertion rubber washer 3 mm ( three millimetres) thick bolts and nuts ISI marked of Finolex make complete including fixing with approved adhesive etc.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

Providing and fixing uPVC plain bend ISI marked of Finolex make including fixing with approved adhesive etc. complete.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing uPVC plain double equal branch ISI marked of Finolex make including fixing with approved adhesive etc. complete.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing uPVC single equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etc. Complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing uPVC collars ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing uPVC clamps ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Constructing brick masonry manhole in cement mortor 1:4 (One cement: four Sand) with RCC top slab in 1:1.5:3 mix (One cement : one point five sand : three graded/crushed stone aggregate ) 20mm (Twenty millimetres) nominal size foundation concrete 1:4:8 ( One cement : four sand : eight graded/crushed stone aggregate 40mm (Forty millimetres) nominal size) inside plastering 12mm (twelve millimetres) thick with cement mortar 1:3 (One cement : three sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two sand : four graded/crushed stone aggregate 20mm (Twenty millimetres nominal size) with a floating coat of neat cement as per standard design finished smooth complete in all respect including curing and testing Inside size 120x90 cm (one hundred twenty into ninety centimetres) and 90 cm (ninety centimetres) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetrrs) internal diameter, total weight of cover and frame to be not less than 116 kg(one hundred sixteen killogramme) (weight of cover 58 kg (fifty eight killogramme) and weight of frame 58 kg (fifty eight killogramme) with common brunt clay FPS common modular bricks of class designation7.5 (seven point five) with sewer bricks contormay to IS:8885 including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Constructing soak pit 1.20x1.20x1.20 m (one point two zero into one point two zero into one point two zero) metre filled with brickbats including S.W. drain pipe 100 mm ( one hundred millimetre ) diameter and 1.20 m ( one point two zero)metre long complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Constructing masonry Chamber 90x90x100 cm(ninety into ninety into one hundred centimetres) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100 mm (one hundred millimetres) top diameter, 160 mm (one hundred sixty millimetres) bottom diameter and 180 mm (one hundred eighty millimetres)deep (inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetres) nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (forty millimetres) nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (twelve millimetres) thick, finished with a floating coat of neat cement complete as per standard design with common brunt clay FPS non modular bricks of class designation7.5 (seven point five) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying 450 mm (four hundred fifty millimetre)dia RCC pipes. Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and Fixing Single socketed pipes.110 mm (one hundred ten millimetre) diameter on wall face unplasticised Rigid uPVC rain water pipes conforming to IS: 13592 TypeA, including jointing with seal ring conforming to IS: 5382, leaving 10mm (ten millimetre) gap for thermal expansion including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing Cowl size 110 mm ( one hundred ten millimetre) including carriage of materials upto all leads and lifts including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Supplying fixing in position prcast RCC mainhole cover and frame required shape and approved quality circular shap 450mm (four hundred fifty milimetes) internal dia metre including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing solar heating panel(BUSCH) ISI Mark complete including carriage of materials upto all leads and lifts including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Design,Supply,Erection,Testing and Commissioning (on grid) complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Kumar