Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹3.9 L+₹33,700 (9.41%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹8.7 L+₹5.1 L (142.8%)Rejected-AOC 155B ALAPAT 15TH LANE TOC H ROAD VYTTILA ERNAKULAM KERALA 682019 | ERNAKULAM | KERALA | 682019 | L3 | Rejected-AOC L3 |
Tender Value
Refer Docs
Closing Date
16 Oct 2021, 2:00 pmClosed
Sunilkumar K A
Deputy General Manager (Projects and Planning), FACT (Cochin Division), Ambalamedu Ernakulam
Fabrication, Supply, Erection and Commissioning of Thermoplastic Load Centers in Acid Area at FACT-CD, Ambalamedu.
2021_FACT_650551_1
04026/2021-2022/E24083
Limited
Miscellaneous Works
Item Rate
60 days
AMBALAMEDU
This tender is issued on limited tender basis from the registered bidders of FACT (CD)
4 documents required · 4 mandatory
₹0
Exempted
9 Nov 2021
29 Sept 2021
18 Oct 2021
29 Sept 2021
16 Oct 2021
29 Sept 2021
Fabrication, Supply, Erection and Commissioning of Thermoplastic Load Centers in Acid Area at FACT-CD, Ambalamedu.
Scope of work includes fabrication and supply of thermoplastic load centers (Model-1) as per the attached specification and drawing. Incomer box shall have 160A Switch Disconnector Fuse (SDF) complete with handle, mounting brackets etc., for operation. Bus bar box shall have copper bus of minimum size 25x6 mm for 3 phases and neutral. Load center shall have a total of 12 numbers of 32A, 4 pole MCBs and 12 numbers of 16A, DP MCBs. Incomer box shall have earth terminals. MCBs and power/earth connectors shall be mounted in Din-rails. All inter connection wiring with sufficient current capacity copper wires/buses and providing suitable earth terminal will be contractors scope. Ferrules shall be provided in the wires and proper labelling shall be done. All earth terminals shall be interconnected. Supporting frame of load center shall be of FRP.
Scope of work includes fabrication and supply of thermoplastic load centers (Model-2) as per the attached specification and drawing. Incomer box shall have 160A SDF complete with handle for operation. Bus bar box shall have copper bus of minimum size 25x6 mm for 3 phases and neutral. Load center shall have a total of 5 numbers of 32A, 4 pole MCBs and 8 numbers of 16A, DP MCBs. Incomer box shall have earth terminals. MCBs and power/earth connectors shall be mounted in Din-rails. All inter connection wiring with sufficient current capacity copper wires/buses and providing suitable earth terminal will be contractors scope. Ferrules shall be provided in the wires and proper labelling shall be done. All earth terminals shall be interconnected. Supporting frame of load center shall be of FRP.
Scope of work includes cutting/removal of existing load centers at site and installation of fabricated thermoplastic load center specified in SL number 1 using PCC. All the materials such as sand , 40 mm hard granite broken stone and cement shall be supplied by contractor. If required, contractor should remove earth/ concrete for properly fixing these items. Required MS items, welding rods, cutting gas etc for fabrication will be supplied from FACT at free of cost. Any nut, bolt or foundation bolt required for fixing is in contractors scope. Disconnection from existing panel and termination of 1 number of input cable of size not greater than 3CX95 Sq.mm and two number of earth cable of size not greater than 1CX35Sq.mm is also included in contractor's scope. Contractor has to provide suitable materials such as glands, Aluminium lugs, earthing lead etc. as per requirement.
Scope of work includes cutting/removal of existing load centers at site and installation of fabricated thermoplastic load center specified in SL number 2 using PCC. All the materials such as sand , 40 mm hard granite broken stone and cement shall be supplied by contractor. If required, contractor should remove earth/ concrete for properly fixing these items. Required MS items, welding rods, cutting gas etc for fabrication will be supplied from FACT at free of cost. Any nut, bolt or foundation bolt required for fixing is in contractors scope. Disconnection from existing panel and termination of 1 number of input cable of size not greater than 3CX95 Sq.mm and two number of earth cable of size not greater than 1CX35Sq.mm is also included in contractor's scope. Contractor has to provide suitable materials such as glands, Aluminium lugs, earthing lead etc. as per requirement.
BABEESH A
Waves Electronics Pvt Ltd
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_684721.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .