Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹2.3 L+₹1,011.53 (0.44%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹2.3 L+₹4,752.61 (2.08%)Rejected-AOC 1704 SUB TREASURY THOTTILPALAM | L3 | Rejected-AOC L3 | |
| 4 | L4₹2.5 L+₹20,146.35 (8.81%)Rejected-AOC | L4 | Rejected-AOC L4 |
| Sl No | Description | Qty | Unit | AZHAR L3 | RAHUL CR L1 | ALI MOHAMMED E I L4 | A O ASHRAF L2 |
|---|---|---|---|---|---|---|---|
| 1.00maintanance | |||||||
| 1.00 | 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet | 60.97 | sqm | 151.57 ₹9,240.47 | 100 ₹6,096.5 Lowest | 161.03 ₹9,817.19 | 149.09 ₹9,089.27 |
| 1.00 | 15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | 91.45 | kg | 5.2 ₹475.53 | 5.85 ₹534.97 | 4.62 ₹422.49 Lowest | 5.12 ₹468.21 |
| 1.00 | OD445139/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35mm (+0.05%), total coated thickness with
zinc coating 120gms per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer
on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective
guard film of 25 microns minimum to avoid scratches during transportation and should be
supplied in single length upto 12m or as desired by Engineer-in-charge. The sheet shall be
fixed using self drilling / self tapping screws of size (5.50x55mm( with EPDM seal complete
upto any ptich in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters
and trusses and including cutting to size and shape wherever required. | 70.03 | sqm | 552.1 ₹38,663.56 | 550 ₹38,516.5 | 589.1 ₹41,254.67 | 543.09 ₹38,032.59 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 280.12 | kg | 172.69 ₹48,373.92 | 160 ₹44,819.2 Lowest | 183.61 ₹51,432.83 | 169.87 ₹47,583.98 |
| 1.00 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 73.51 | sqm | 1,579.09 ₹1,16,078.91 | 1,600 ₹1,17,616 | 1,686.72 ₹1,23,990.79 | 1,553.36 ₹1,14,187.49 Lowest |
| 1.01 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 120.13 | sqm | 101.28 ₹12,166.77 | 100 ₹12,013 | 107.29 ₹12,888.75 | 99.63 ₹11,968.55 Lowest |
| 1.01 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 54.29 | sqm | 96.49 ₹5,238.25 | 100 ₹5,428.8 | 102.17 ₹5,546.6 | 94.92 ₹5,153.02 Lowest |
| 1.01 | OD445214/2025-2026:Mancoolie | 2 | each | 929.56 ₹1,859.12 Lowest | 1,082.18 ₹2,164.36 | 1,027.12 ₹2,054.24 | 946.26 ₹1,892.52 |
| 1.01 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | 2.4 | sqm | 515.33 ₹1,236.79 | 579.74 ₹1,391.38 | 549.79 ₹1,319.5 | 506.92 ₹1,216.61 Lowest |
Tender Value
₹2.6 L
EMD Value
₹6,564
Closing Date
9 Mar 2026, 5:00 pmClosed
The Assistant Enginee
The Assistant Engineer, LID AND EW Section , Eriyad Grama Panchayat
2025-26 Eriyad GP Muhammed Abdhul Rahman vayanasala vinjanakendram naveekarannam-190/25-26
2026_LSGD_841977_3
07/2025-26/AE/LID AND EW/ERD
Open Tender
Civil Works - Buildings
Item Rate
120 days
Eriyad Grama Panchayat
Please refer Tender documents.
8 documents required · 8 mandatory
₹580
Yes
₹6,564
Yes
18 May 2026
28 Feb 2026
11 Mar 2026
28 Feb 2026
9 Mar 2026
28 Feb 2026
maintanance
15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet
15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
OD445139/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35mm (+0.05%), total coated thickness with zinc coating 120gms per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.50x55mm( with EPDM seal complete upto any ptich in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
OD445214/2025-2026:Mancoolie
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1420327.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.32 MB
Tendernotice_2.pdf
PDF • 0.29 MB
Tendernotice_3.pdf
PDF • 0.24 MB
Tendernotice_4.pdf
PDF • 0.21 MB
Tendernotice_5.pdf
PDF • 0.15 MB
BOQ_1420327.xls
BOQ • 0.30 MB
nit190.pdf
Tender Documents • 0.03 MB
sbd190.pdf
Tender Documents • 1.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .