REPAIRS MAINTENANCE WORKS TO JOINERIES AND CERTAIN OTHER ITEMS ON K L AND M AREAS AT NAVAL BASE KOCHI UNDER GE NW KOCHI

Amount

Taking down chowkats with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm.

Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exceeding 4 Sqm.

Taking down shutter of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm

Taking down shutter of any description not exceeding 1.00 Sqm

Taking down shutter of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm including re-securing or easing and adjusting and refixing in same opening

Taking down shutter of any description not exceeding 1.00 Sqm including re-securing or easing and adjusting and refixing in same opening

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes or top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 ) used instead of exposed portion of PVC sheet beading.wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified.

Supply and fix 2nd class hard wood plain, solid, straight chowkat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Supply and fix 2nd class hard wood 35mm thick glazed,gauged and skeleton Door shutters, open rebated and prepared to receive glass,gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass,gauze,etc, size of members of shutters as specified in SSR Part I, Section 8,ciause 8.24(a).

Supply and fix 2nd class hard wood 30mm thick glazed,gauged and skeleton window shutters, open rebated and prepared to receive glass,gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass,gauze,etc, size of members of shutters as specified in SSR Part I, Section 8,ciause 8.24(a).

S&F in repair powser coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F in repair powder coated aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap eading, screws etc. complete all as specified

S&F in repair Anodised aluminium window and ventilator shutters, sliding/ side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F in repair powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with inimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

M&L in repair for 18mm thick Marine plywood, water proof, termite & Borer proof, corrosion free with Decorative laminate 1mm thick both side for cupboard shutter, self, Drawer, all as specified and as directed by Engr-in-Charge.

S&F in repair stainless steel auto closer counter sunk hinges complete all as directed and as directed by Engr-in-Charge.

S&F in repair Ball bearing runners 45 mm, 450 mm longTelescopic ball bearing drawer channel full extension load capacity 50 kgs, Make :Hexa, Shreeji, Hafele, Hettich

S&F in repairs 100mm long stainless steel handle complete all as directed and as directed by Engr-in-Charge.

S&F in repair Hasp and staple, safety type,Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F in repair stainless steel Hat and coat hooks, solid body, 300 mm long

S&F in repair brass Mortice lock two leaver, vertical type, size 100 mm

S&F in repair Aluminium (Die cast) body Door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repair 125mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black

Dismantling boarding, any description, fixed in any position with nails

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exceeding 10 cm width or girth including preparation of new surface.

Supply and fix in repair door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in repair in floor, 140mm over length of cover plats.

Supply and fix aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples.

All as per item No 33 here-in-before but fixed in repair.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty or fitted with beads not exceeding 1.50 Sqm.

S&F Sheet glass ordinary quality 3.00 mm thick and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane.

Supply and fix 4.00mm thick frosted glass pin head type and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane

Supply and fix 5.5mm thick sheet glass and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane

Supply and fix stainless steel butt hinges medium weight for 100mm size.

Ditto as above but 75mm size

Supply and fix extruded aluminium alloy handles fabricated type anodised 150 mm size.

Ditto as above but 100 mm size

Supply and fix aluminium anodised barrel tower bolt extruded section of 150 mm long.

Ditto as above but 125mm size

Taking down cement plastered on Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with watercomplete all as specified and as directed.

M&L for rendering 10mm thick on brick or concret wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new surfaces of walls (plastered or unplastered) including cornices preparation and applying two coat of distember oil emulsion over a coat of alkali resistant primer complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair stainless steel curtain rail bright finished 20 mm dia decorative type complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair stainless steel bright finished decorative brackets/finials for curtain rail 20mm dia.

Supply and fix in repair Alumiium powder coated curtain rail 20 mm dia decorative type complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair aluminium powder coated decorative brackets with finials for curtain rail 20mm dia.

Dismantling of floor hearth or wall tilling tiles including CM bedding (but not backing) and disposing the rubbish off the premises as directed

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including provision of CM screed 15 mm thick in CM (1:6) all as specified and directed.

Material and labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including provision of backing coat 10 mm thick in CM (1:4) complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover filllets complete all as specified and as directed by Engr-in-charge.

Dismantling timber scantlings under 40 Sq cm in section for unframed work in fillets, rails, posts, rafters, purlins etc, in unframed works complete all as specified and as directed.

M&L for 2 nd class hard wood plain fillets square or rectangular in section clean sawn secured with nails, sectional area exc 6 sqcm and n exc 13 sq cm complete all as specified and as directed by Engr-in-charge.

M&L preparation Surfaces of any description n exc 10cm width or girth when not connected with other painting or when painted in different tint and apply two coat of synthetic enalmel paint over a coat of pink primer complete all as specified and as directed

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.4923-1997 grade St.-240 complete all as specified and as directed

S&F 3mm thick aluminium composite panel of exterior grade with 0.50 mm thick of aluminium layers on both faces, wrapping to steel frame work by routing of joints, wrapping, bending or turning up/mitred angles as per site requirement and fixing with adhesive (Araldite) by popcorn pins and flat pressed the sheets using masking tape till the banding remein solid, complete all specified and as directed.

M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S&F in repair Aluminium snap grid false ceiling on frame work of aluminium angle 25x25x2 mm, Main TEE 38x25x1.5 mm and cross TEE 25x25x1.4 mm and size of grid 605x605 mm with hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.50 mm dia, 40 mm long with and including provn of 4mm thick Non asbestos fibre cement building boards fixed to aluminium frame work with screws including preparation of new ceiling surfaces and applying two coats of white washing to new ceiling surfaces including preparation of surfaces etc complete all as specified as per manufacturer's instructions and all as specified and directed

S&C ENTERPRISES (BID ID -3082433)

M/s T.P SHAJI (BID ID -3080502)