Allied works of Quarter no 9 near ALC Office 2nd Call

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm. and under including cutting the patch in proper shape raking out joints and preparing the plastering the surface of the wall’s complete including disposal of rubbish to the dumping ground within 50 mtr. Lead. With cement mortar (1:4) 1 cement : 4 fine sand

Renewing glass panes, with putty and nails wherever necessary including raking out old putty : A. Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 liter capacity -White

Providing and fixing C.P fitting of approved brand Short Nose bib cock

Long Nose bib cock

Angle Valve

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : A. 300 x 16mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : A. 200 x 10 mm

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood 35mm

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class Teak wood A. 50x12mm

PROVIDING AND FIXING OF LIGHTING POINTS /FAN POINTS IN 1.5 MM PVC INSULATED COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING OF APPROVED MAKE INCLUDING PROVIDING AND FIXING OF 6-AMP SWITCH RECESSED /SURFACE POINT TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989)

PROVIDING AND FIXING OF HEATING POINTS IN 4 MM PVC INSULATED COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING WITH 2.5 MM PVC INSULATED COPPER WIRE OF SAME MAKE INCLUDING PROVIDING AND FIXING OF 6/16 -AMP SWITCH RECESSED /SURFACE POINT TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989)

PROVIDING AND FIXING OF WIRING FOR 3-5 PIN 6-AMP SOCKET POINTS IN 2.5 MM PVC COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING OF SAME MAKE INCLUDING PROVIDING AND FIXING OF 5-PIN 6-AMP SWITCH/SOCKET TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989)

PROVIDING AND FIXING OF 8-12 WATT LED SURFACE LIGHT FITTINGS (ROUND/SQUARE SHAPE) COMPLETE IN ALL RESPECTS

engaging of mazdoor for disposal

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing of iron make approved..exhaust fan