Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹16.4 Cr
EMD Value
₹16.4 L
Closing Date
4 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Superintending Engineer, Project Implementation Unit, Health & Family Welfare Department.
New Construction of Staff Quarter C-type 32 Unit, D1-Type 4 Unit And E-Type 6 Unit at State Hospital DharampurTa.Dharampur Dist Valsad
364222
2026-27/117/01
Open
Civil Works - Buildings
Works
Navsari
1 document required · 1 mandatory
₹18,000
PIU-General Fund A/c 11-114
₹16.4 L
7 Nov 2026
7 Nov 2026
7 Nov 2026
4 Dec 2026
7 Nov 2026
90 days
Name of work : New Construction of Staff Quarter C-type 32 Unit, D1-Type 4 Unit And E-Type 6 Unit at State
Hospital Dharampur Ta.Dharampur Dist Valsad
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Excavation for foundation up to 1.5 m depth including sorting out and stacking of useful
Rupees One Hundred Forty Nine And Paise
1 1905.90 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Dance & hard soil 149.83 Cmt
Eighty Three Only
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful
Rupees Two Hundred Eighty Seven And Paise
2 1191.86 materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard murrum 287.21 Cmt
Twenty One Only
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking
of useful materials and disposing off the excavated stuff upto 50 Meter lead.(C ) Hard Rupees Two Hundred Seventy Three And
murrum Paise Fifty Four Only
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking
of useful materials and disposing off the excavated stuff upto 50 Meter lead. (D) Soft rock Rupees Two Hundred Eighty Seven And Paise
not requiring Blasting Forty Eight Only
Providing and laying rubble for appron (each stone weighting not less than 40Kg.) including Rupees One Thousand Forty One And Paise
5 470.02 and packing and filing in the interestices with quarry-spalls. 1041.05 Cmt
Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- graded stone
aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Rupees Three Thousand Six Hundred Eighty
Foundation and Plinth Three And Paise Thirty Four Only
Providing and laying cement concrete 1:3:6 (1 Cement :3-coarse sand :6-hand broken stone
aggregates 40 mmnominal size) and curing complete excluding cost of formwork in Rupees Three Thousand Five And Paise
(A)Foundation and Plinth Seventy Six Only
Providing & laying controlled cement concrete M - 300 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Four Thousand Nine Hundred Two
8 2726.82 Raft /strip /Base foundation with all lead and lift as directed by engineer in charge. Raft 4902.54 Cmt
And Paise Fifty Four Only
/strip /Base foundation
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing & laying controlled cement concrete M - 300 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Six Thousand Eight Hundred Forty
9 49.54 column up to plinth level with all lead and lift as directed by engineer in charge. R.C.C 6847.80 Cmt
Seven And Paise Eighty Only
column up to plinth level
Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations
etc. in layers not exceeding 20cm. In depth consolidating each disposited layer by ramming Rupees One Hundred Thirty And Paise Thirty
and watering. Nine Only
Filling in plinth with sand under floors including watering ramming, consolidating and Rupees Four Hundred Sixty And Paise
11 99.53 dressing complete 460.19 Cmt
Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness Rupees Two Hundred Eighty Nine And Paise
12 1584.97 including watering, ramming and consolidating etc. complete. 289.06 Cmt
Providing and laying controlled cement concrete M:300 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in tie Rupees Five Thousand Seven Hundred Eighty
13 128.72 beam , ground beam with all lead and lift as directed by engineer in charge. R.C.C tie beam 5789.35 Cmt
Nine And Paise Thirty Five Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Five Thousand One Hundred Thirty
14 67.25 wall at ground floor with all lead and lift as directed by engineer in charge. R.C.C Wall at 5131.81 Cmt
One And Paise Eighty One Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Five Thousand One Hundred Seventy
15 14.48 wall at 1st floor with all lead and lift as directed by engineer in charge. R.C.C Wall at 1st 5171.91 Cmt
One And Paise Ninety One Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Five Thousand Two Hundred Twelve
16 14.45 wall at 2nd floor with all lead and lift as directed by engineer in charge. R.C.C Wall at 2nd 5212.00 Cmt
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Five Thousand Two Hundred Fifty
17 16.86 wall at 3rd floor with all lead and lift as directed by engineer in charge. R.C.C Wall at 3rd 5252.10 Cmt
Two And Paise Ten Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Five Thousand Two Hundred Ninety
18 12.54 wall at 4th floor with all lead and lift as directed by engineer in charge. R.C.C Wall at 4th 5292.20 Cmt
Two And Paise Twenty Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Five Thousand Three Hundred Thirty
19 6.67 wall at 5th floor with all lead and lift as directed by engineer in charge. R.C.C Wall at 5th 5332.30 Cmt
Two And Paise Thirty Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Five Thousand Three Hundred
20 6.67 wall at 6th floor with all lead and lift as directed by engineer in charge. R.C.C Wall at 6th 5372.39 Cmt
Seventy Two And Paise Thirty Nine Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Five Thousand Four Hundred Twelve
21 6.67 wall at 6th floor with all lead and lift as directed by engineer in charge. R.C.C Wall at 7th 5412.49 Cmt
And Paise Forty Nine Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Five Thousand Four Hundred Fifty
22 6.67 wall at 6th floor with all lead and lift as directed by engineer in charge. R.C.C Wall at 8th 5452.59 Cmt
Two And Paise Fifty Nine Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Five Thousand Four Hundred Ninety
23 10.48 wall at stair cabin with all lead and lift as directed by engineer in charge. R.C.C Wall at stair 5492.68 Cmt
Two And Paise Sixty Eight Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Seven Thousand Thirty One And
column with any lead and lift at ground floor/parking Paise Sixty Two Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Seven Thousand Seventy One And
column with any lead and lift R.C.C. Column at 1st floor Paise Seventy Two Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Seven Thousand One Hundred Eleven
column with any lead and lift R.C.C. Column at 2nd floor And Paise Eighty One Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Seven Thousand One Hundred Fifty
column with any lead and lift R.C.C. Column at 3rd floor One And Paise Ninety One Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Seven Thousand One Hundred Ninety
column with any lead and lift R.C.C. Column at 4th floor Two And Paise One Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Seven Thousand Two Hundred Thirty
column with any lead and lift R.C.C column at 5th floor Two And Paise Ten Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Seven Thousand Two Hundred
column with any lead and lift R.C.C. Column at 6th floor Seventy Two And Paise Twenty Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Seven Thousand Three Hundred
column with any lead and lift R.C.C. Column at7th floor Twelve And Paise Thirty Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Seven Thousand Three Hundred Fifty
column with any lead and lift R.C.C. Column at 8th floor Two And Paise Forty Only
Providing & laying controlled cement concrete M - 250 RCC work with curing etc. complete
including the cost of form work but excluding the cost of reinforcement for R.C.C. Work in Rupees Seven Thousand Three Hundred
column with any lead and lift at stair cabin Ninety Two And Paise Forty Nine Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Rupees Four Thousand Six Hundred Ninety
34 26.31 coping/RCC bend with all lead and lift as directed by engineer in charge. R.C.C coping/RCC 4697.51 Cmt
Seven And Paise Fifty One Only
Brick work using common burnt clay building bricks having crushing strength not less than
35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Rupees Four Thousand Fifty One And Paise
Conventional Seventy Eight Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness
above 150 to 350 mm) in single or multiple layers in cement mortar 1:5 (1 cement : 5 fine
sand). Crushing strength of aerated concrete block/ bats shall not be less than 40 KG/sqcm,
minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity
shall not exceed 0.3 W/make, fire resistant 4 hours, in true line level and plumb and
Rupees Four Thousand Five Hundred Twenty
36 42.34 cleaning the surface with necessary tool tackles etc. at all floors, any heights, all depths, 4528.57 Cmt
Eight And Paise Fifty Seven Only
any levels (in foundation and superstructure) and all places including curing, scaffolding,
racking / flush jointing etc complete, as per drawing / specification and approved by
architect and as directed by Engineer In charge for all civil, plumbing, electrical &
infrastructure works. at Ground floor level
Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness
above 150 to 350 mm) in single or multiple layers in cement mortar 1:5 (1 cement : 5 fine
sand). Crushing strength of aerated concrete block/ bats shall not be less than 40 KG/sqcm,
minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity
shall not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning
Rupees Four Thousand Five Hundred Sixty
37 130.97 the surface with necessary tool tackles etc. at all floors, any heights, all depths, any levels 4569.06 Cmt
Nine And Paise Six Only
(in foundation and superstructure) and all places including curing, scaffolding, racking /
flush jointing etc complete, as per drawing / specification and approved by architect and as
directed by Engineer In charge for all civil, plumbing, electrical & infrastructure works. at
1st floor level
Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness
above 150 to 350 mm) in single or multiple layers in cement mortar 1:5 (1 cement : 5 fine
sand). Crushing strength of aerated concrete block/ bats shall not be less than 40 KG/sqcm,
minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity
shall not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning
Rupees Four Thousand Six Hundred Nine And
38 130.95 the surface with necessary tool tackles etc. at all floors, any heights, all depths, any levels 4609.55 Cmt
Paise Fifty Five Only
(in foundation and superstructure) and all places including curing, scaffolding, racking /
flush jointing etc complete, as per drawing / specification and approved by architect and as
directed by Engineer In charge for all civil, plumbing, electrical & infrastructure works. at
2nd floor level
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness
above 150 to 350 mm) in single or multiple layers in cement mortar 1:5 (1 cement : 5 fine
sand). Crushing strength of aerated concrete block/ bats shall not be less than 40 KG/sqcm,
minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity
shall not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning
Rupees Four Thousand Six Hundred Fifty And
39 122.56 the surface with necessary tool tackles etc. at all floors, any heights, all depths, any levels 4650.04 Cmt
Paise Four Only
(in foundation and superstructure) and all places including curing, scaffolding, racking /
flush jointing etc complete, as per drawing / specification and approved by architect and as
directed by Engineer In charge for all civil, plumbing, electrical & infrastructure works. at
3rd floor level
Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness
above 150 to 350 mm) in single or multiple layers in cement mortar 1:5 (1 cement : 5 fine
sand). Crushing strength of aerated concrete block/ bats shall not be less than 40 KG/sqcm,
minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity
shall not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning
Rupees Four Thousand Six Hundred Ninety
40 83.75 the surface with necessary tool tackles etc. at all floors, any heights, all depths, any levels 4690.53 Cmt
And Paise Fifty Three Only
(in foundation and superstructure) and all places including curing, scaffolding, racking /
flush jointing etc complete, as per drawing / specification and approved by architect and as
directed by Engineer In charge for all civil, plumbing, electrical & infrastructure works. at
4th floor level
Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness
above 150 to 350 mm) in single or multiple layers in cement mortar 1:5 (1 cement : 5 fine
sand). Crushing strength of aerated concrete block/ bats shall not be less than 40 KG/sqcm,
minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity
shall not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning
Rupees Four Thousand Seven Hundred Thirty
41 47.00 the surface with necessary tool tackles etc. at all floors, any heights, all depths, any levels 4731.02 Cmt
One And Paise Two Only
(in foundation and superstructure) and all places including curing, scaffolding, racking /
flush jointing etc complete, as per drawing / specification and approved by architect and as
directed by Engineer In charge for all civil, plumbing, electrical & infrastructure works. at
5th floor level
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness
above 150 to 350 mm) in single or multiple layers in cement mortar 1:5 (1 cement : 5 fine
sand). Crushing strength of aerated concrete block/ bats shall not be less than 40 KG/sqcm,
minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity
shall not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning
Rupees Four Thousand Seven Hundred
42 47.00 the surface with necessary tool tackles etc. at all floors, any heights, all depths, any levels 4771.51 Cmt
Seventy One And Paise Fifty One Only
(in foundation and superstructure) and all places including curing, scaffolding, racking /
flush jointing etc complete, as per drawing / specification and approved by architect and as
directed by Engineer In charge for all civil, plumbing, electrical & infrastructure works. at
6th floor level
Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness
above 150 to 350 mm) in single or multiple layers in cement mortar 1:5 (1 cement : 5 fine
sand). Crushing strength of aerated concrete block/ bats shall not be less than 40 KG/sqcm,
minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity
shall not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning
Rupees Four Thousand Eight Hundred Twelve
43 47.00 the surface with necessary tool tackles etc. at all floors, any heights, all depths, any levels 4812.00 Cmt
(in foundation and superstructure) and all places including curing, scaffolding, racking /
flush jointing etc complete, as per drawing / specification and approved by architect and as
directed by Engineer In charge for all civil, plumbing, electrical & infrastructure works. at
7th floor level
Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness
above 150 to 350 mm) in single or multiple layers in cement mortar 1:5 (1 cement : 5 fine
sand). Crushing strength of aerated concrete block/ bats shall not be less than 40 KG/sqcm,
minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity
shall not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning
Rupees Four Thousand Eight Hundred Fifty
44 47.00 the surface with necessary tool tackles etc. at all floors, any heights, all depths, any levels 4852.49 Cmt
Two And Paise Forty Nine Only
(in foundation and superstructure) and all places including curing, scaffolding, racking /
flush jointing etc complete, as per drawing / specification and approved by architect and as
directed by Engineer In charge for all civil, plumbing, electrical & infrastructure works. at
8th floor level
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying autoclave aerated concrete blocks masonry as per drawing (Thickness
above 150 to 350 mm) in single or multiple layers in cement mortar 1:5 (1 cement : 5 fine
sand). Crushing strength of aerated concrete block/ bats shall not be less than 40 KG/sqcm,
minimum density in oven dry condition between 651 to 750 KG/CUM, thermal conductivity
shall not exceed 0.3 W/m.k, fire resistant 4 hours, in true line level and plumb and cleaning
Rupees Four Thousand Eight Hundred Ninety
45 37.70 the surface with necessary tool tackles etc. at all floors, any heights, all depths, any levels 4892.99 Cmt
Two And Paise Ninety Nine Only
(in foundation and superstructure) and all places including curing, scaffolding, racking /
flush jointing etc complete, as per drawing / specification and approved by architect and as
directed by Engineer In charge for all civil, plumbing, electrical & infrastructure works. at
stair cabin level
Half brick masonry in common brunt clay building bricks having crushing strength not less
than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and
Rupees Six Hundred Fifty Three And Paise
46 325.77 plinth. extra for half brick masonry in super structure at 1st floor. (B) conventional with all 653.01 Smt
lead and lift as directed by engineer in charge. at 1st floor.
Half brick masonry in common brunt clay building bricks having crushing strength not less
than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and
Rupees Seven Hundred Fifty Nine And Paise
47 325.76 plinth. extra for half brick masonry in super structure at 2nd floor. (B) conventional with all 759.34 Smt
Thirty Four Only
lead and lift as directed by engineer in charge. at 2nd floor.
Half brick masonry in common brunt clay building bricks having crushing strength not less
than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and
Rupees Eight Hundred Twelve And Paise Fifty
48 202.25 plinth. extra for half brick masonry in super structure at 3rd floor. (B) conventional with all 812.50 Smt
lead and lift as directed by engineer in charge. at 3rd floor.
Half brick masonry in common brunt clay building bricks having crushing strength not less
than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and
Rupees Eight Hundred Sixty Five And Paise
49 143.74 plinth. extra for half brick masonry in super structure at 4th floor. (B) conventional with all 865.67 Smt
Sixty Seven Only
lead and lift as directed by engineer in charge. at 4th floor.
Half brick masonry in common brunt clay building bricks having crushing strength not less
than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and
Rupees Nine Hundred Eighteen And Paise
50 143.74 plinth. extra for half brick masonry in super structure at 5th floor. (B) conventional with all 918.84 Smt
Eighty Four Only
lead and lift as directed by engineer in charge. at 5th floor.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Half brick masonry in common brunt clay building bricks having crushing strength not less
than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and
51 143.74 plinth. extra for half brick masonry in super structure at 6th floor. (B) conventional with all 972.00 Rupees Nine Hundred Seventy Two Only Smt
lead and lift as directed by engineer in charge. at 6th floor.
Half brick masonry in common brunt clay building bricks having crushing strength not less
than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and
Rupees One Thousand Twenty Five And Paise
52 143.74 plinth. extra for half brick masonry in super structure at 6th floor. (B) conventional with all 1025.17 Smt
lead and lift as directed by engineer in charge. at 7th floor.
Half brick masonry in common brunt clay building bricks having crushing strength not less
than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) in foundation and
Rupees One Thousand Seventy Eight And
53 143.74 plinth. extra for half brick masonry in super structure at 6th floor. (B) conventional with all 1078.34 Smt
Paise Thirty Four Only
lead and lift as directed by engineer in charge. at 8th floor.
Providing and laying controlled cement concrete M:200 RCC and curing complete including
the cost of form work but excluding the cost of reinforcement for reinforced concrete work
Rupees Seven Thousand Six Hundred Two
54 5.72 in Lintel /sill Bend at Basement level and ground floor level with all lead and lift as 7602.27 Cmt
And Paise Twenty Seven Only
directed by engineer in charge. R.C.C Lintel / Sill Bend at ground floor level
Providing and laying controlled cement concrete M:200 RCC and curing complete including
the cost of form work but excluding the cost of reinforcement for reinforced concrete work Rupees Seven Thousand Six Hundred Forty
55 26.83 in Lintel / Sill Bend at 1st floor with all lead and lift as directed by engineer in charge. 7642.37 Cmt
Two And Paise Thirty Seven Only
R.C.C Lintel / Sill Bend at 1st floor
Providing and laying controlled cement concrete M:200 RCC and curing complete including
the cost of form work but excluding the cost of reinforcement for reinforced concrete work Rupees Seven Thousand Six Hundred Eighty
56 24.81 in Lintel / Sill Bend at 2nd floor with all lead and lift as directed by engineer in charge. 7682.46 Cmt
Two And Paise Forty Six Only
R.C.C Lintel / Sill Bend at 2nd floor
Providing and laying controlled cement concrete M:200 RCC and curing complete including
the cost of form work but excluding the cost of reinforcement for reinforced concrete work Rupees Seven Thousand Seven Hundred
57 21.34 in Lintel / Sill Bend at 3rd floor with all lead and lift as directed by engineer in charge. 7722.56 Cmt
Twenty Two And Paise Fifty Six Only
R.C.C Lintel / Sill Bend at 3rd floor
Providing and laying controlled cement concrete M:200 RCC and curing complete including
the cost of form work but excluding the cost of reinforcement for reinforced concrete work Rupees Seven Thousand Seven Hundred Sixty
58 12.59 in Lintel / Sill Bend at 4th floor with all lead and lift as directed by engineer in charge. 7762.66 Cmt
Two And Paise Sixty Six Only
R.C.C Lintel / Sill Bend at 4th floor
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying controlled cement concrete M:200 RCC and curing complete including
the cost of form work but excluding the cost of reinforcement for reinforced concrete work Rupees Seven Thousand Eight Hundred Two
59 11.66 in Lintel / Sill Bend at 5th floor with all lead and lift as directed by engineer in charge. 7802.76 Cmt
And Paise Seventy Six Only
R.C.C Lintel / Sill Bend at 5th floor
Providing and laying controlled cement concrete M:200 RCC and curing complete including
the cost of form work but excluding the cost of reinforcement for reinforced concrete work Rupees Seven Thousand Eight Hundred Forty
60 11.66 in Lintel / Sill Bend at 6th floor with all lead and lift as directed by engineer in charge. 7842.85 Cmt
Two And Paise Eighty Five Only
R.C.C Lintel / Sill Bend at 6th floor
Providing and laying controlled cement concrete M:200 RCC and curing complete including
the cost of form work but excluding the cost of reinforcement for reinforced concrete work Rupees Seven Thousand Nine Hundred
61 11.66 in Lintel / Sill Bend at 6th floor with all lead and lift as directed by engineer in charge. 7923.05 Cmt
Twenty Three And Paise Five Only
R.C.C Lintel / Sill Bend at 7th floor
Providing and laying controlled cement concrete M:200 RCC and curing complete including
the cost of form work but excluding the cost of reinforcement for reinforced concrete work Rupees Seven Thousand Nine Hundred Sixty
62 11.66 in Lintel / Sill Bend at 6th floor with all lead and lift as directed by engineer in charge. 7963.14 Cmt
Three And Paise Fourteen Only
R.C.C Lintel / Sill Bend at 8th floor
Providing and laying controlled cement concrete M:200 RCC and curing complete including
the cost of form work but excluding the cost of reinforcement for reinforced concrete work Rupees Seven Thousand Nine Hundred Sixty
63 0.91 in Lintel / Sill Bend at stair cabin with all lead and lift as directed by engineer in charge. 7963.14 Cmt
Three And Paise Fourteen Only
R.C.C Lintel / Sill Bend at stair cabin
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Two Hundred Sixty Six
64 86.93 level beam with all lead and lift as directed by engineer incharge. at ground floor 6266.04 Cmt
And Paise Four Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Three Hundred Six And
65 121.71 level beam with all lead and lift as directed by engineer incharge.at 1st floor 6306.14 Cmt
Paise Fourteen Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab
Rupees Six Thousand Three Hundred Forty
66 118.70 level beam with all lead and lift as directed by engineer incharge. at 2nd floor 6346.23 Cmt
Six And Paise Twenty Three Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab
Rupees Six Thousand Three Hundred Eighty
67 78.44 level beam with all lead and lift as directed by engineer incharge.at 3rd floor 6386.33 Cmt
Six And Paise Thirty Three Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab
Rupees Six Thousand Four Hundred Twenty
68 44.00 level beam with all lead and lift as directed by engineer incharge. R.C.C Slab level beam 6426.43 Cmt
Six And Paise Forty Three Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab
Rupees Six Thousand Four Hundred Sixty Six
69 39.85 level beam with all lead and lift as directed by engineer incharge. R.C.C Slab level beam 6466.53 Cmt
And Paise Fifty Two Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab
Rupees Six Thousand Five Hundred Six And
70 39.85 level beam with all lead and lift as directed by engineer incharge. R.C.C Slab level beam 6506.62 Cmt
Paise Sixty Two Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab
Rupees Six Thousand Five Hundred Forty Six
71 39.85 level beam with all lead and lift as directed by engineer incharge. R.C.C Slab level beam 6546.72 Cmt
And Paise Seventy Two Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab
Rupees Six Thousand Five Hundred Eighty Six
72 39.85 level beam with all lead and lift as directed by engineer incharge. R.C.C Slab level beam 6586.82 Cmt
And Paise Eighty Two Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab
Rupees Six Thousand Six Hundred Twenty Six
73 5.70 level beam with all lead and lift as directed by engineer incharge. R.C.C Slab level beam 6626.91 Cmt
And Paise Ninety One Only
at Stair cabin floor
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Three Hundred Three
with all lead and lift as directed by engineer incharge. At ground floor And Paise Forty One Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Three Hundred Forty
with all lead and lift as directed by engineer incharge. At 1st Floor Three And Paise Fifty One Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Three Hundred Eighty
with all lead and lift as directed by engineer incharge. At 2nd floor Three And Paise Sixty Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Four Hundred Twenty
with all lead and lift as directed by engineer incharge. At 3rd floor Three And Paise Seventy Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Four Hundred Sixty
with all lead and lift as directed by engineer incharge. At 4th floor Three And Paise Eighty Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Five Hundred Three
with all lead and lift as directed by engineer incharge. At 5th floor And Paise Ninety Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Five Hundred Forty
with all lead and lift as directed by engineer incharge. At 6th floor Three And Paise Ninety Nine Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Five Hundred Eighty
with all lead and lift as directed by engineer incharge. At 7th floor Four And Paise Nine Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Six Hundred Twenty
with all lead and lift as directed by engineer incharge. At 8th floor Four And Paise Nineteen Only
Providing and laying controlled cement concrete M:250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Slab Rupees Six Thousand Six Hundred Sixty Four
with all lead and lift as directed by engineer incharge. At stair cabin And Paise Twenty Eight Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying controlled cement concrete M: 200 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Rupees Six Thousand Three Hundred Sixty
84 0.27 projection /Whether shed Cantilevers up to floor two level with all lead and lift as 6367.04 Cmt
Seven And Paise Four Only
directed by engineer incharge. at ground floor
Providing and laying controlled cement concrete M: 200 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Rupees Six Thousand Four Hundred Seven
85 3.02 projection /Whether shed Cantilevers up to floor two level with all lead and lift as 6407.14 Cmt
And Paise Fourteen Only
directed by engineer incharge. at 1st floor
Providing and laying controlled cement concrete M: 200 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Rupees Six Thousand Four Hundred Forty
86 2.59 projection /Whether shed Cantilevers up to floor two level with all lead and lift as 6447.23 Cmt
Seven And Paise Twenty Three Only
directed by engineer incharge at 2nd floor
Providing and laying controlled cement concrete M: 200 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Rupees Six Thousand Four Hundred Eighty
87 1.73 projection /Whether shed Cantilevers up to floor two level with all lead and lift as 6487.33 Cmt
Seven And Paise Thirty Three Only
directed by engineer incharge at 3rd floor
Providing and laying controlled cement concrete M: 200 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Rupees Six Thousand Five Hundred Twenty
88 1.15 projection /Whether shed Cantilevers up to floor two level with all lead and lift as 6527.43 Cmt
Seven And Paise Forty Three Only
directed by engineer incharge at 4th floor
Providing and laying controlled cement concrete M: 200 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Rupees Six Thousand Five Hundred Sixty
89 0.94 projection /Whether shed Cantilevers up to floor two level with all lead and lift as 6567.53 Cmt
Seven And Paise Fifty Two Only
directed by engineer incharge at 5th floor
Providing and laying controlled cement concrete M: 200 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Rupees Six Thousand Six Hundred Seven And
90 0.94 projection /Whether shed Cantilevers up to floor two level with all lead and lift as 6607.62 Cmt
Paise Sixty Two Only
directed by engineer incharge at 6th floor
Providing and laying controlled cement concrete M: 200 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Rupees Six Thousand Six Hundred Forty
91 0.94 projection /Whether shed Cantilevers up to floor two level with all lead and lift as 6647.72 Cmt
Seven And Paise Seventy Two Only
directed by engineer incharge at 7th floor
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying controlled cement concrete M: 200 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Rupees Six Thousand Six Hundred Eighty
92 0.94 projection /Whether shed Cantilevers up to floor two level with all lead and lift as 6687.82 Cmt
Seven And Paise Eighty Two Only
directed by engineer incharge at 8th floor
Providing and laying controlled cement concrete M: 200 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in Rupees Six Thousand Seven Hundred Twenty
93 0.21 projection /Whether shed Cantilevers up to floor two level with all lead and lift as 6727.91 Cmt
Seven And Paise Ninety One Only
directed by engineer incharge at stair cabin
Providing and laying controlled cement concrete M: 250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in RCC Rupees Seven Thousand Five Hundred Eighty
94 9.33 Staircase at ground floor level with all lead and lift as directed by engineer in charge. at 7580.04 Cmt
And Paise Four Only
ground floor level
Providing and laying controlled cement concrete M: 250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in RCC Rupees Seven Thousand Six Hundred Twenty
95 9.33 Staircase at 1st floor level with all lead and lift as directed by engineer in charge. at 1st 7620.14 Cmt
And Paise Fourteen Only
Providing and laying controlled cement concrete M: 250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in RCC Rupees Seven Thousand Six Hundred Sixty
96 9.33 Staircase at 2ndfloor level with all lead and lift as directed by engineer in charge. at 7660.24 Cmt
And Paise Twenty Four Only
Providing and laying controlled cement concrete M: 250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in RCC Rupees Seven Thousand Seven Hundred And
97 6.22 Staircase at 3rd floor level with all lead and lift as directed by engineer in charge. at 3rd 7700.33 Cmt
Paise Thirty Three Only
Providing and laying controlled cement concrete M: 250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in RCC Rupees Seven Thousand Seven Hundred
98 3.11 Staircase at 4th floor level with all lead and lift as directed by engineer in charge. at 4th 7740.43 Cmt
Forty And Paise Forty Three Only
Providing and laying controlled cement concrete M: 250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in RCC Rupees Seven Thousand Seven Hundred
99 3.11 Staircase at 5th floor level with all lead and lift as directed by engineer in charge. at 5th 7780.53 Cmt
Eighty And Paise Fifty Three Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying controlled cement concrete M: 250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in RCC Rupees Seven Thousand Eight Hundred
100 3.11 Staircase at 6th floor level with all lead and lift as directed by engineer in charge. at 6th 7820.63 Cmt
Twenty And Paise Sixty Three Only
Providing and laying controlled cement concrete M: 250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in RCC Rupees Seven Thousand Eight Hundred Sixty
101 3.11 Staircase at 7th floor level with all lead and lift as directed by engineer in charge. 7860.72 Cmt
And Paise Seventy Two Only
Providing and laying controlled cement concrete M: 250 RCC and curing complete including
the cost of form work but excluding the reinforcement for reinforced concrete work in RCC Rupees Seven Thousand Nine Hundred And
102 3.11 Staircase at 8th floor level with all lead and lift as directed by engineer in charge. 7900.82 Cmt
Paise Eighty Two Only
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and Rupees Seventy Six And Paise Twenty One
103 354607.66 placing in position complete upto floor two level 76.21 Kg
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and Rupees Seventy Seven And Paise Twenty One
104 58347.37 placing in position complete first floor level. 77.21 Kg
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and Rupees Seventy Eight And Paise Twenty One
105 58342.51 placing in position complete second floor level. 78.21 Kg
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and Rupees Seventy Nine And Paise Twenty One
106 44056.63 placing in position complete third floor level. 79.21 Kg
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and
107 26035.56 placing in position complete fourth floor level. 80.21 Rupees Eighty And Paise Twenty One Only Kg
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and Rupees Eighty One And Paise Twenty One
108 22895.53 placing in position complete fifth floor level. 81.21 Kg
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and Rupees Eighty Two And Paise Twenty One
109 22895.53 placing in position complete sixth floor level. 82.21 Kg
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and Rupees Eighty Three And Paise Twenty One
110 22895.53 placing in position complete Seventh floor level. 83.21 Kg
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and Rupees Eighty Four And Paise Twenty One
111 22895.53 placing in position complete Eighth floor level. 84.21 Kg
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and Rupees Eighty Five And Paise Twenty One
112 4619.71 placing in position complete. At Stair cabin level 85.21 Kg
Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on
interior brick/concrete work/ AAC block wall for interior plastering upto floor two level & Rupees Two Hundred Seventy Two And Paise
finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) (A) Ground Floor Eighty Only
Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on
interior brick/concrete work/ AAC block wall for interior plastering upto floor two level & Rupees Two Hundred Ninety Nine And Paise
finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) First Floor Fifty Three Only
Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on
interior brick/concrete work/ AAC block wall for interior plastering upto floor two level & Rupees Three Hundred Twenty Six And Paise
finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) 2nd Floor Twenty Five Only
Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on
interior brick/concrete work/ AAC block wall for interior plastering upto floor two level & Rupees Three Hundred Fifty Two And Paise
finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At 3rd Floor Ninety Seven Only
Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on
interior brick/concrete work/ AAC block wall for interior plastering upto floor two level & Rupees Three Hundred Seventy Nine And
finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At 4th floor level Paise Seventy Only
Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on
interior brick/concrete work/ AAC block wall for interior plastering upto floor two level & Rupees Four Hundred Six And Paise Forty
finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) at 5th floor level Two Only
Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on
interior brick/concrete work/ AAC block wall for interior plastering upto floor two level & Rupees Four Hundred Thirty Three And Paise
finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At 6th floor level Fifteen Only
Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on
interior brick/concrete work/ AAC block wall for interior plastering upto floor two level & Rupees Four Hundred Fifty Nine And Paise
finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At 7th floor level Eighty Seven Only
Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on
interior brick/concrete work/ AAC block wall for interior plastering upto floor two level & Rupees Four Hundred Eighty Six And Paise
finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At 8th floor level Sixty Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing 15 mm thick Mala cement plaster in double coat mala cement plaster on
interior brick/concrete work/ AAC block wall for interior plastering upto floor two level & Rupees Five Hundred Thirteen And Paise
finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At Stair cabin Thirty Two Only
Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for
interior plastering up to floor two level and finished even and smooth in (ii)Cement mortar
1:4 (1cement :4 sand) mala plastering line , level and plumb to developed even surface as Rupees One Hundred Forty And Paise Ninety
per instruction of engineer in charge etc complete. with all lead and lift as directed by Five Only
engineer in charge. At Ground floor level
Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for
interior plastering up to floor two level and finished even and smooth in (ii)Cement mortar
1:4 (1cement :4 sand) mala plastering line , level and plumb to developed even surface as Rupees One Hundred Sixty Four And Paise
per instruction of engineer in charge etc complete. with all lead and lift as directed by Thirty Four Only
engineer in charge. At 1st floor level
Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for
interior plastering up to floor two level and finished even and smooth in (ii)Cement mortar
1:4 (1cement :4 sand) mala plastering line , level and plumb to developed even surface as Rupees One Hundred Eighty Seven And Paise
per instruction of engineer in charge etc complete. with all lead and lift as directed by Seventy Three Only
engineer in charge. At 2nd floor level
Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for
interior plastering up to floor two level and finished even and smooth in (ii)Cement mortar
1:4 (1cement :4 sand) mala plastering line , level and plumb to developed even surface as Rupees Two Hundred Eleven And Paise
per instruction of engineer in charge etc complete. with all lead and lift as directed by Twelve Only
engineer in charge. r At 3rd floor level
Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for
interior plastering up to floor two level and finished even and smooth in (ii)Cement mortar
1:4 (1cement :4 sand) mala plastering line , level and plumb to developed even surface as Rupees Two Hundred Thirty Four And Paise
per instruction of engineer in charge etc complete with all lead and lift as directed by Fifty One Only
engineer in charge. At 4th floor level
Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for
interior plastering up to floor two level and finished even and smooth in (ii)Cement mortar
1:4 (1cement :4 sand) mala plastering line , level and plumb to developed even surface as Rupees Two Hundred Fifty Seven And Paise
per instruction of engineer in charge etc complete. At 5th floor level with all lead and lift Ninety Only
as directed by engineer in charge. At 5th floor level
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for
interior plastering up to floor two level and finished even and smooth in (ii)Cement mortar
1:4 (1cement :4 sand) mala plastering line , level and plumb to developed even surface as Rupees Two Hundred Eighty One And Paise
per instruction of engineer in charge etc complete. At 6th floor level with all lead and lift Thirty Only
as directed by engineer incharge.At 6th floor level
Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for
interior plastering up to floor two level and finished even and smooth in (ii)Cement mortar
1:4 (1cement :4 sand) mala plastering line , level and plumb to developed even surface as Rupees Three Hundred Four And Paise Sixty
per instruction of engineer in charge etc complete. At 7th floor level with all lead and lift Nine Only
as directed by engineer incharge.At 7th floor level
Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for
interior plastering up to floor two level and finished even and smooth in (ii)Cement mortar
1:4 (1cement :4 sand) mala plastering line , level and plumb to developed even surface as Rupees Three Hundred Twenty Eight And
per instruction of engineer in charge etc complete. At 8th floor level with all lead and lift Paise Eight Only
as directed by engineer incharge.At 8th floor level
Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits of stairs for
interior plastering up to floor two level and finished even and smooth in (ii)Cement mortar
1:4 (1cement :4 sand) mala plastering line , level and plumb to developed even surface as Rupees Three Hundred Fifty One And Paise
per instruction of engineer in charge etc complete. At Stair cabin floor level with all lead Forty Seven Only
and lift as directed by engineer in charge. At Stair cabin floor level
Providing and laying average 20 mm. thick Sand faced cement plaster on masonry
work/AAC Block / RCC wall upto all height & all lift above ground level and for all shapes
consisting of first coat (backing coat) average 12 mm. thick with CM 1:3 (1 cement:
coarse sand) rough wired finish and second coat of average 8 mm. thick uniform grained Rupees Four Hundred One And Paise Ninety
textured by using wooden Gutka in CM 1:1 (1 cement: 1 sand), including scaffolding, Eight Only
hacking to RCC surface, forming grooves, drip moulds, pattas, curing etc. complete as
directed by engineer-in-charge.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and applying external finish of average 2 to 2.5mm thick acrylic polymer based
texture Heritage surface wall textures and pattern with standard tool and applicator as
specified by manufacturer on exterior surfaces at all heights including scaffolding to give
even shades including thoroughly brushing the surfaces free from mortar droping and
other foreign matter and sand paper smoothed etc. complete as per the manufacture Rupees Eight Hundred Eighty Eight And Paise
specifications and up to the satisfaction of Engineer in-charge/ Architect. The rate includes Eighty Only
making of grooves, pattas and finishing as directed by Architect/ EIC. Paint shall be
measured and paid in seperate tender item. (Item should be executed by approved
applicator only.)
Providing throating or plaster drip and molding to R.C.C. Chhajja. with up to all and any
135 510.10 floor with all lead & lift etc complete. 42.17 Rupees Forty Two And Paise Seventeen Only Rmt
Applying two coats of Birla or Asian acrylic lippy (putty) and two coats of primer of
approved brand and manufacture on new wall surface to give an even shade including
136 19673.40 thoroughly brushing the surface free from mortar dropping and other foreign matter and 40.59 Rupees Forty And Paise Fifty Nine Only Smt
sand prepared smooth. with up to all and any floor with all lead & lift etc complete.
Wall Painting (three coats) with plastic emulation paint of approved brand and
manufacture on undecorated wall surface to give an even shade including thoroughly
brushing the surface free from mortar droppings and other foreingnmatter and sand Rupees One Hundred Twenty And Paise
papered smooth extra every subsequent coat of wall painting with plastic emulation paint Eighty Seven Only
of approved brand. with up to all and any floor with all lead & lift etc complete.
Ceiling painting (three coats) with plastic emulsion paint of approved brand and
manufacture on undecorated wall surface to give an even shade including thoroughly
Rupees One Hundred Twenty Six And Paise
138 3667.83 brushing the surface free from mortar droppings and other foreign matter and sand 126.28 Smt
Twenty Eight Only
papered smooth. with up to all and any floor with all lead & lift etc complete.
Finishing wall with weather proof Apex exterior emulsion paint on wall surface (Three
coats) with Primer coat to give an required shape even shade after thoroughly brushing
Rupees One Hundred Fourteen And Paise
139 8671.87 the surface to remove all dirt, and remains of loose powdered materials with up to all and 114.53 Smt
Fifty Three Only
any floor with all lead & lift etc complete.
Providing and laying Vitrified tiles 8 to 10 mm thick , 36''x 36'' in flooring treads of steps
and landing laid on abed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Rupees One Thousand Four Hundred Eighty
finishing with flush pointing in white cement Four And Paise Sixty One Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps
and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Rupees One Thousand Seventy Three And
finishing with flush pointing in white cement Paise Twelve Only
Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and
dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white Rupees One Thousand One Hundred Forty
cement slurry One And Paise Forty Five Only
Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of
cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse
Rupees Nine Hundred Sixty Five And Paise
143 161.40 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade 965.59 Smt
Fifty Nine Only
of slab including rubbing and polishing etc. complete. (A) 25mm thick
Providing and laying polished kota stone slab 25mm thick in risers of teps,skirting Dedo
and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed Rupees One Thousand Eighty Nine And Paise
144 31.53 with gray cement slury mixed with pigment to match the shade of slab including rubbing 1089.67 Smt
Sixty Seven Only
and polishing etc. complete.
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement
mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by
adhesive material including dismentaling of existing flooring and jointed with color cement Rupees One Thousand Three Hundred Ninety
slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit Seven And Paise Eighty Three Only
Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x
450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 Rupees One Thousand Four Hundred Forty
cement : 3 coarse sand) & jointed with white cement slurry One And Paise Twenty Two Only
Providing & lying Pavit Exterior paving tilessquare rasso /beige series 300mm x300mm and
10 mm thick In floor tiles with first quality only on a bed of 25 mm thick cement mortar
1:6 ( 1 cement : 6 coarse sand finished bed with flush pointing in white cement ) pointing
in white cement and jointed jointed with matching pigment ,adhesive white cement &
Rupees One Thousand Three Hundred Fifty
147 67.16 other bounding material. Laying of tiles in line and level & camber complete laid as per 1354.41 Smt
Four And Paise Forty One Only
design , pattern , different shape & colour combination as per detail design or instruction
of architect and as directed by engineer in charge etc complete with up to all and any floor
with all lead & lift etc complete.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm
broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be
tempered to bring mortar creme out upto surface using white cement including rounding Rupees Seven Hundred Forty Seven And
off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic Paise Twenty Nine Only
acid etc. as directed
Providing and laying cement concrete flooring 1:2:4(1-cement :2-coarses and : 4- graded
stone aggregate 20mm nominal size) laidinone layerand finished with a floating coat of Rupees Three Hundred Twenty Two And
neat cement. (B) 50mm thick. Paise Ninety Three Only
Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including
Rupees Twenty Three And Paise Sixty Eight
150 678.50 neat cement finishing, watering etc. complete. 23.68 Rmt
Providing and fixing on wall face un plasticized Rigid PVC 110 mm diameter rain water
pipes 10kg/smt conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes Rupees Three Hundred Fifty And Paise Forty
of Approved brands only. etc complete up to all floor level with all lead and lift as per Seven Only
instruction of engineer in charge.
Providing erecting and fixing double coated ISI water tank of required capacity each with all
152 28000.00 necessary fittings and connection etc. complete on terrace 3.95 Rupees Three And Paise Ninety Five Only Ltr
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer,
3 mm thick water proofing membrane, black finished reinforced with glass fibre matt
consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the
same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 -
160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and
sealing all joints etc., and preparing the surface complete. The vital physical and chemical
Rupees Four Hundred Eighty And Paise
153 1484.34 parameters of the membrane shall be as under : Joint strength in longitudinal and 480.14 Smt
transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and
transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold
flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of
membrane shall be got done through the authorized applicator of the manufacturer of
membrane 3 mm thick as directed by engineer in charge
Providing Filling in Sunk Portion with cinder of best approved quality including watering
,ramming consolidation and dressing etc. complete as directed in toilet and bath sunken Rupees Three Hundred Sixty And Paise Fifty
area at all floor up to all lead and lift. Seven Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing of minimum 16 mm thick telephonic Black Granite stone slab for jambs
of doors and window . Black Granite should be spotless ,without any crack , vain or other
damages joined with grey cement slurry and matching pigment in vertical and horizontal
member , including rubbing and polishing and full round edge molding on both the sides(
edge), Mirror polishing curing of the Black Granite stone as per detail design and
instruction. The door frame should have sandwich type Jambs stone fitting to Rupees Two Thousand Six Hundred Sixty
155 957.13 accommodate fixing of door where required, the fixing of jambs with necessary binding 2667.41 Smt
Seven And Paise Forty One Only
wire tiles piece, adhesive, clamp, fastener, white cement and matching pigment other
consumable, molding and polishing machinery other tools, tackles required to complete
the item and where two member vertical and horizontal meet it should cut 45 degree angle
etc up to all floor with all lead & lift etc complete. The Black Granite stone size and quality
should be as per sample approved by architect and Engineer in charge.
Providing & laying sandwich platform comprising of a) Sandwich of 18 mm thick single side
polish Granite of approved size, shade and sample on top and 30 mm thick polished kota in
bottom with 25mm thick cement mortar (1:4) in between b) At centre vertical sandwich
supports of 30 mm thick two kota stone on sides and 20mm CM (1:4) in between and at
both end walls vertical supports of 18 mm thick double side granite. c) 75 mm raised
platform at bottom with kota on top and 50mm CM (1:4) at bottom, kota stone skirting as Rupees Six Thousand Six Hundred Eight And
156 132.59 per design and approved sample. The rate includes rounding, champhering and mirror 6608.43 Smt
Paise Forty Three Only
polishing of edges, facias of granite, MS support including necessary bonding adhesive (if
required). Rate shall be also inclusive of making holes & cutouts for SS sink, Oval wash
basin, Piller tap / Bib tap etc. as directed by engineer in charge. (Only plan area shall be
measured & paid for). Rate shall be included all kota & granite mentioned in above.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing alluminium Panelled single/double door Partly Glazed & Partly with
12 mm thick both side pre laminated Particle Board with Frame having extruded
alluminium color anodized section frame main Frame size 101.60 mm x 44.45 mm x
3.18mm ( of Section No.20011 @ wt. of 2.54 kg/mt )unit providing shutters of bottom &
Top rail- 114.30 mm x 25.40 mm x 3.18mm (of Section No.19511 @ wt. of 2.65 kg/mt )
Shutter Middle rail = 150 mm x 44.45 x 2.65 mm (of Jindal Section No.20002 @ wt. of
kg/mt) Vertical member Shutter style = 85.00 mm x 44 mm x 3.00(of Jindal Section
No.19509 @ wt. of 1.51 kg/mt).with 12mmth. both side pre laminated particle board Rupees Six Thousand Six Hundred Thirty Nine
(novapan) conforming to IS: 12823 Grade 1 Type II in panelling fixed in aluminium door And Paise Fifty Five Only
consisting of outer frame shutter as per design with two pairs of standard handles, two
pair of concealed shoot bolts 250mm long and pin type narrow style lock and thumb turn
from the other side, including all fixtures, fastening etc. complete as directed and as per
drawing and design. Rate including hinges/Pivots and making provision for fixing of fitting
wherver required including the cost of EPDM rubber/neoprene gasket required Anodised
aluminium (work for all floors)
Providing and fixing threee treack alluminium Sliding shutter Cardinal series CS25 base
channel 3 In 1 Model having weight of 2.226 Kg/mtr 8mm Single Glass Shutter 0.835 kg/mr
shutter INTERLOCK Universal Clip 0.393 kg/mtr TRACK RAIL CAP 0.156 kg/mtr "V" Type
Rupees Nine Thousand Seven Hundred Fifty
158 352.33 with 8 mm thick transparent toughen float glass with powder coated aluminum fittings and 9754.58 Smt
Four And Paise Fifty Eight Only
fixtures handel , lock and othe asscessories . The sliding door should be fix with transparent
silicon sealant glass fixing to frame as per details etc
Providing and fixing window having extruded aluminum Colour Powder Coated section
frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt, horizontal Three
track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt, vertical member of size
92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member
Rupees One Thousand Five Hundred Ninety
159 211.85 size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm 1591.87 Smt
One And Paise Eighty Seven Only
x 1.29 mm @ wt.of 0.456Kg/mt with 5 mm thick transparent bronze colour tinted float
glass with powder coated aluminum fittings and fixtures and transparent silicon sealant
glass fixing to frame as per details etc
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing window having extruded aluminum Colour Powder Coated section
frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track
member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of
size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.0.659 Kg/mt with sliding shutters of
horizontal member size 40mm x18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of Rupees One Thousand Seven Hundred Five
size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt with 5mm thick transparent bronze And Paise Sixty Seven Only
colour tinted float glass with powder coated aluminum fittings and fixtures and transparent
silicon sealant glass fixing to frame as per details etc complete for window
Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x
1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation Rupees One Thousand One Hundred Seventy
with 5 mm thick frosted glass as details etc complete for Ventilation Five And Paise Fifty Six Only
Providing wood work in frames of Doors, windows cleare story windows and othersimilar
Rupees Sixty One Thousand Twenty Three
162 6.90 works wrought, framede and fixed in position. (A) Indian Teak Wood 61023.19 Cmt
And Paise Nineteen Only
Provoding and fixing flush door shutters, solid core construction with frame of first class
hardwood with cross board and face veneer or plywood face panels,including anodised
Rupees One Thousand Seven Hundred Ninety
163 510.75 alluminium butt hinges with necessary screws. (B) Non-decorative type and block board 1797.77 Smt
Seven And Paise Seventy Seven Only
core anodised alluminium butt hinges in flush door shutters (2) 35 mm thick
Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter with wood
grain raised panneled design finish shutter having extra reinforcement on sides & edges in
Gel coat finish.The core of the shutter & frame is to be filed up with injected polyurethene
foam done in situ along with embedded wooden pieces for stiffening & also taking hinges & Rupees Two Thousand Nineteen And Paise
fintures. The whole FRP frame & shutter is to be water proof weather proof, termite proof Ninety Eight Only
& resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with fastener sleeve
& alluminium fixtures & fastenings
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing of decorative stainless steel SS 304 Non magnetic best quality
Railing/Grill as per approved sample. The SS304 Railing/Grill shall be fix on the edge or
periphery of staircase & steps as per detail design and instruction . , The Providing and
fixing of SS railing including cutting, fabrication ,SS arc welding, grinding , erection , fixing
with necessary machinery tools, tackles, labor and required civil work as per detail design Rupees Four Hundred Two And Paise Ninety
at specific location The item includes buffing, polishing , assembling of the different unit of Nine Only
SS pipe Railing/Grill and required civil work for the fixing of the SS 304 Railing/Grill up to all
floor in perfect position etc complete as per approved sample as directed by engineer in
charge. As per attached Detail specification.
Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with
M.S. flats at required spacings and frame alround, square or round bars with round headed
bolts and nuts or by screws (A) Plain Grill. ( as detail design with two coats of primer & Rupees One Hundred Nine And Paise Eight
Anticorrosive Coating Paint and color as per instruction of architect etc complete. Only
Providing and fixing of minimum 16 to 18 mm thick Black Granite stone slab of full length
approved quality for flooring over Bed of 20mm ( average) thick base of cement mortar
1:6 (1cement : 6 coarse sand) or lime mortar 1:1.5 laid and jointed with white cement
slurry and matching pigment including rubbing and polishing complete for flooring in steps
. The fixing of Black Granite stone slab 16 to 18 mm thick at the stair case steps up to all
floor in raiser & tread including full edge molding with nosing to flooring and two anti skid Rupees Two Thousand Four Hundred Six And
grooves as per instruction of engineer in charge . The fixing of Black Granite stone as per Paise Eighty Three Only
detail design and instruction, including necessary Mirror polishing , cutting of the stone
adhesive , clamp , fastener , other consumable and labor and fixing up to all floor with all
lead & lift etc complete as directed by engineer in charge.
Providing and fixing minimum 50mm wide sand blasting on Black Granite for stair case
steps with necessary tools tacjels , equipment plant as per detail design upto all floor with Rupees Ninety Three And Paise Ninety Three
all lead & lift etc complete as per instruction of engineer in charge. Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Carrying out plinth treatment during conctruction by spraying chemical solution for termite
control treatment for all type of structure. The chemical used shall be chloropyriphos(1:19)
/ Lindane emulsifiable as per latest IS code no 6313 (Part II). Plinth area in plan at GF shall
only be measured and paid. A guarantee bond of 10 years shall be furnished. Rate shall be
inclusive of material required for Anti Termite Treatment and labour for applying.a)
Rupees One Hundred Twenty Four And Paise
169 1271.76 Bottom surface and the sides of the excavation made for masonry/ RCC foundations at the 124.28 Smt
Twenty Eight Only
rate of 4 liters/ of surface area (wherever applicable).b) At the rate of 7.5 liter/ Sqm of
surface area to the backfill at the depth of 500mm below the original ground level. The
soil in the immediate contact with the vertical surface of RCC column shall be treated.c)
As per attached Detail specification.
Providing and fixing G.I. hexagonal chickenmesh of size 20mm x 20mm of 22 gauge at
junction of concrete and brick work or between different materials after making "V" grove
between two different material surface and filled with rich cement mortar and @ 100mm
on each side of surfaces including necessary "U" nails / screws / washers with cleats for
170 7877.76 202.00 Rupees Two Hundred Two Only Smt
fixing, overlaps, scaffolding at all floors / all levels / all heights / all shapes etc. complete as
per drawing / specifications and direction of Engineer-in-charge. For civil, plumbing,
electrical & infrastructure works.
Providing & laying Controlled cement concrete M 250 grade in Trimix flooring /road for
average 150 mm thick wearing coat in RCC Road without fly ash with lead of 10 Km from
plant site including all other taxes octroi, transportation, pumping, pouring, curing of
concrete etc. complete including cost of metallic C channel from work but excluding the
cost of reinforcement in R.C.C. M 250 Trimix flooring work having average 150 mm thick
wearing coat in RCC Road laid as detail design & directed. The item of M 250 grade in Rupees Four Thousand Four Hundred Three
Trimix flooring including plant , machinery , tamping vibrating finishing curing for 21 days , And Paise Sixty Only
creating expansion joint and filling in joints with bitumen or other material as specified etc
complete with all lead and lift as directed by engineer in charge . (Minimum cement level
as per IS 456-2000 shall be adopted for concrete grade) (C)Concrete Grade M-250
Dewatering of TRI MIX M-250 floor concrete by means of vacuum dewatering using
floater machine and other necessary equipment , plant and labour etc complete as Rupees Fifty Seven And Paise Fifty Seven
directed by engineer in chrge Only
Core Cutting in RCC wall, beam, columns and slab at specific locations up to all height of
required size & depth and refilling , repairing , making it good with RCC M20 etc complete
Rupees Eight Hundred Thirty Three And Paise
173 244.00 as directed by engineer in charge .Size 100mm to 200mm dia (average depth 150 mm to 833.25 Each
Twenty Five Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S
trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand)
Rupees One Thousand Three Hundred Three
174 48.00 (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in 1303.71 Each
And Paise Seventy One Only
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or
European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass
hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets,
mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof
Rupees Ten Thousand One Hundred Forty
175 42.00 coupling of approved municipal design complete, including painting of fittings and brackets, 10140.79 Each
And Paise Seventy Nine Only
cutting and making good the walls and floors wherever required: White vitreous china dual
purpose WC pan with white solid plastic seat and lid with white vitreous china flushing
cistern and C.P. flush bend etc complete
Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets
painted white including fixed with single 15 mm C.P. brass pillar cock , 32 mm dia C.P. brass
waste coupling, 40 mm waste pipe, 15 mm dia flexible pipe and 15 mm dia angle valve Rupees Two Thousand Six Hundred Thirteen
with all connection .(A) Vitreous China: (ii) Flat Back washbasin 550 mm x 400mm size. (i) In And Paise Eighty Eight Only
Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting
holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) Rupees Two Thousand Two Hundred Eighty
600mm x 450mm x 150mm size And Paise Twenty Seven Only
Providing and fixing chromium plated brass half turn flush cock of approved quality inc.
Rupees Two Hundred Sixty Three And Paise
178 90.00 fixing in pipeline complete. 25 mm Dia 263.77 Each
Seventy Seven Only
Providing & fixing C.P. Brass screw down bib tap at all floor levels,polished bright etc.
Rupees One Hundred Eighty Six And Paise
179 132.00 comp. (A) 15mm dia. For all floors 186.83 Each
Eighty Three Only
Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks
Rupees Three Hundred Eight And Paise
180 132.00 and back nuts. (i) 15mm dia 308.73 Each
Seventy Three Only
Providing and fixing 15mm dia. brass screw down stop tap of approved quality including
Rupees Two Hundred Five And Paise Eighty
181 84.00 fixing in pipeline etc. complete as directed by Engineer In charge. 205.83 Each
Providing and fixing chromium plated, bottle trap with necessary couplings of approved
Rupees Two Hundred Ninety Five And Paise
182 90.00 quality for wash basin 295.80 Each
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing unplasticised P.V.C. connection pipe with PTMT
Rupees One Hundred Four And Paise Thirty
183 132.00 Nuts, collar and bush of approved quality and colour 104.34 Each
Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia
Rupees Sixty Seven And Paise Ninety One
Providing and fixing brass screw down stop tap.(B) 20mm dia.
Rupees Two Hundred Twenty Three And
Paise Eighty One Only
Providing and fixing 600 mm x 450 mm beveled edge mirror of superior glass mounted on
6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws Rupees Eight Hundred Thirty Three And Paise
and washers. Seventy Three Only
Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden Rupees Six Hundred Three And Paise
187 90.00 plugs with C.P. brass scews.(B) 600mm x 20mm size 603.19 Each
Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Rupees Two Hundred Eighty Two And Paise
Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket and guard rail Rupees Five Hundred Eighteen And Paise
189 90.00 complete mixed to wooden plug with C.P. brass screws 518.58 Each
Fifty Eight Only
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of
the following nominal diameter of self cleansing design with C.I scread down or hinged Rupees Five Hundred Seventy One And Paise
grating including the cost of cutting and making good the walls. Eight Only
Providing and fixing S.W.gully trap with C.I.grating brick masonry chamber and water tight
c.i. cover with frame of 300 mm x 300 mm size (inside )with standard weight. (I) square Rupees One Thousand Two Hundred Ninety
month traps.150 mm x 100 mm size p with all lead and lift etc. Two And Paise Nineteen Only
constructing brick masonry chamber for under ground c.I. Inspection chamber and band
with bricks having crushing strength not less than 35 kg/cm2 in cm 1:5. c.i. cover with
frame (light duty) 455 mm x 610 mm internal dimension, total weight of cover with frame
to be not lass then 38 kg.weight of cover 23kg and wt. of frame 15 kg ) r.c.c top slab
Rupees Two Thousand Nine Hundred Thirty
192 68.00 with 1:2:4 mix (1 cement:2 sand:4 aggregates 20 mm size) foundation concrete 1:5:10 ,in 2932.93 Each
Two And Paise Ninety Three Only
side plaster 15 mm thick with cement mortar 1:3 finished smooth with a floating coat of
neat cement on walls and bed concrete etc. complete.) in side dimension 455 mm x
mm and 450 mm deep for single pipe.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded
stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse
sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-
Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels
in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal
size) finished smooth complete including curing and festing (i) Inside size 900mm x Rupees Nineteen Thousand Three Hundred
193 24.00 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight 19330.46 Each
Thirty And Paise Forty Six Only
of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame
Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not
less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type
depth 1.50 Metre for 150mm diameter sewer.r
(II) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. GR Part
Rupees Three Hundred Ninety Seven And
194 12.00 thereof over item No.24.27 (I) for depth from 1.50M. to 2.25M. 397.19 Each
Paise Nineteen Only
Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for
cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall be concelled as directed Rupees Seventy Two And Paise Sixty Five
195 378.00 including necessary fittings etc. including testing of pipe and joints and fixing the same 72.65 Rmt
with adhesive solvent, including cost of all materials with all lead and lift etc.(A) 15 mm dia.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for
cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall be concelled as directed
Rupees Ninety One And Paise Eighty Four
196 696.00 including necessary fittings etc. including testing of pipe and joints and fixing the same 91.84 Rmt
with adhesive solvent, including cost of all materials with all lead and lift etc. (c) 25 mm dia
Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for
cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall be concelled as directed
Rupees One Hundred Forty Eight And Paise
197 778.00 including necessary fittings etc. including testing of pipe and joints and fixing the same 148.12 Rmt
with adhesive solvent, including cost of all materials with all lead and lift etc. (E) 40 mm
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
providing & fixing to wall ceiling and floor 10 kg/f/cum working pressure polyethylene pipes
of the following outside diameter ,low density complete with special flange compression
Rupees Two Hundred Seventy Seven And
198 696.00 type fittings ,wall clamped making good wall ,cling and floor with all lead and lift etc. - 75 277.43 Rmt
Paise Forty Three Only
providing & fixing to wall ceiling and floor 10kg/f/cum working pressure polyethylene pipes
of the following outside diameter ,low density complete with special flange compression
Rupees Three Hundred Thirty Six And Paise
199 522.00 type fittings ,wall clamped making good wall ,cling and floor with all lead and lift etc. 110 336.24 Rmt
Twenty Four Only
Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) of
the following nominal bore , tube fitting and clamps including making good the wall ceiling
Rupees Nine Hundred Nineteen And Paise
200 265.00 and floor G I pipe80mm up to all floors with all lead and lift as directed by engineer in 919.80 Rmt
Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) of
the following nominal bore , tube fitting and clamps including making good the wall ceiling
Rupees Seven Hundred Twenty Three And
201 100.00 and floor G I pipe 65 mm up to all floors with all lead and lift as directed by engineer in 723.83 Rmt
Paise Eighty Three Only
Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) of
the following nominal bore , tube fitting and clamps including making good the wall ceiling
Rupees Four Hundred Twenty Five And Paise
202 143.40 and floor G I pipe 40mm dia meter up to all floors with all lead and lift as directed by 425.33 Rmt
Thirty Three Only
engineer in charge
Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) of
the following nominal bore , tube fitting and clamps including making good the wall ceiling
Rupees Two Hundred Eighty Two And Paise
203 126.00 and floor G I pipe 25 mm dia meter up to all floors with all lead and lift as directed by 282.18 Rmt
engineer in charge
(B) Providing sock pit of 50 Cu.M. Volume including excavating and filling brickbats with
Rupees Thirty Three Thousand Seven
dry masonry work at top for 45cm. height including covering the top with stone
204 8.00 33721.88 Hundred Twenty One And Paise Eighty Eight Each
including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed.
Providing and laying (two level or slopes) and jointing with stiff mixture of cement mortar
in proportion 1:1 ,salt glazed stone ware pipe following nominal internal diameter
Rupees Two Hundred Sixteen And Paise
205 134.40 including testing of pipes and joints etc. complete.with all lead and lift etc. (A) 100 mm 216.36 Rmt
Thirty Six Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying (two level or slopes) and jointing with stiff mixture of cement mortar
in proportion 1:1 ,salt glazed stone ware pipe following nominal internal diameter
Rupees Three Hundred Five And Paise
206 134.40 including testing of pipes and joints etc .complete with all lead and lift etc. (B)150 mm dia 305.13 Rmt
Providing and fixing Gun metal check or non-return fullway wheel valve with all lead and
Rupees Six Hundred Sixty Three And Paise
207 8.00 lift etc.(E) 40mm dia. 663.43 Each
Forty Three Only
Providing and fixing ball cock of approved. quality as directed with all lead and lift etc.(B)
Rupees One Hundred Eighty Nine And Paise
208 8.00 Copper metal 50mm 189.84 Each
Eighty Four Only
Providing and fixing in position cowel went to pipes with all lead and lift etc. 100mm
Rupees One Hundred Eighty Nine And Paise
Eighty Four Only
Making connection of galvanized Mild steel distribution branch with galvanized mild steel
main 50mm to 80mm nominal bore by providing and fixing tee including cutting and
210 3.00 894.00 Rupees Eight Hundred Ninety Four Only Each
threading the pipes complete.
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE
having National Sanitation Foundation (NSF) seal for potable water of following dia.
Rupees One Hundred Sixty Six And Paise
211 105.00 nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. 166.86 Rmt
Eighty Six Only
complete with all lead and lift etc..[A] 15 mm..
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE
having National Sanitation Foundation (NSF) seal for potable water of following dia.
Rupees Two Hundred Forty Nine And Paise
212 105.00 nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. 249.72 Rmt
Seventy Two Only
complete.with all lead and lift etc. [C] 25 mm.
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE
having National Sanitation Foundation (NSF) seal for potable water of following dia.
Rupees Four Hundred Forty Two And Paise
213 135.00 nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. 442.04 Rmt
complete. with all lead and lift etc. [E] 40mm.
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE
having National Sanitation Foundation (NSF) seal for potable water of following dia.
Rupees Six Hundred Fifty Three And Paise
214 84.00 nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. 653.77 Rmt
Seventy Seven Only
complete. with all lead and lift etc. [F] 50 mm.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Construction Septic tank inside dimention of 3.00 m in length &1.50 m in width & 2.25 m
depth including excavating any type of soil as shown and mentioned in the
drawing,providing and laying 0.10 m thick plain cement concrete 1:4:8 ( 1 cement :
coarse sand : 8 graded stone agg.) 40 mm thick IPS flooring at bottom with brick masonary
0.23 m thick walls CM 1:6 ( 1 cement : 6 coarse sand ) and intermediate half brick
masonary CM 1:4 & RCC Top slabs 0.12 m thick in 1:2:4 (1 cement : 2 coarse sand : 4 Rupees Forty Seven Thousand Two Hundred
graded stone agg) including reinforcement as per design and 15 mm thick cement plaster in Thirteen And Paise Twenty Nine Only
CM 1:3 with floating coat of neat cement slurry inside, top and around tank below 15 cm
on ground level, Also provide Two nos SFRC (Steel Fibre Reinforced concrete) cover with
frame (Medium duty) 455mm x 610mm internal dimensions etc complete as per direction
of Engineer in charge.
Pro. And fixing single layer waterproof gypsum board 12.5mm thick sections using
waterpro of board of size 1220mm x 1830mm x 8.0mm suspended by GI suspender
channel of size25 mm x 3 mm with inter mediate channelog size 18mm x 40mm x 0.8 mm
at 1220mm center to center ceiling section of size 40 mm x 35 mm x 0.55mm at 457mm Rupees Six Hundred Six And Paise Ninety Five
216 423.38 c/c and perimeter channel A of size 20mm x 27mm x 30mm x 0.5mm at edges & drops 606.95 Smt
incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat, joining
compound top coat on ceiling incl. makingnecy. opening for light fitting, diffuser etc. comp.
as per detail drawing as directed
Providing and fixing decorative entrance gate made out of cast iron and various mild steel
tabular section combination . The Ornamental entrance gate should be fixed at compound
wall including pattern and die making , cutting, welding, grinding , fabrication ,fixing in
position at compound wall with necessary pedestal , bearing block and other locking Rupees One Hundred Ninety And Paise
217 810.00 arrangement . The entrance gate should be painted with two coats of priming coat of 190.89 kG
Eighty Nine Only
paint, and two coat of oil paint including minior civil work etc. complete. The decorative
entrance gate shall be as per detail design and instruction of engineer incharge.
Providing and laying Granular sub base 250mm thk. in required layer by providing coarse
graded material Grading - I using B.T. M.C. metal 53 mm to 26.5 mm at 35%, aggregate
26.5 to 4.75 mm at 45% and coarse sand at 20% [1.28 times loose volume / Cmt. of
compacted volume], (CBR more than 30%) as per Table 400-2 of MORT&H gradation Rupees One Thousand One Hundred Ninety
including conveying the material at site of work, mixing and spreading in to grade and Nine And Paise Eighty Eight Only
camber, watering and consolidating at OMC with vibratory roller including the cost of
materials, labours etc. complete.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing pre-cast Rubber Dye /steel Dye interlocking concrete block 60mm thick
with grade of concrete M300 pnumatic compressed/ vibrated mechanically and as per
approved design Confirming to IS 15658 :2006 including 35mm Sand layer for levelling and Rupees Six Hundred Eighty Six And Paise
filling the joint with sand inproper line and level as per guidlines of IRC : SP 63-2018 etc. Ninety Only
Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block
30cm length,30cm height and 15cm thick of M250 grade concret as per approved design Rupees Three Hundred Sixty One And Paise
220 1153.83 and including excavation for fixing inproper line and level,filling the joint with C:M 361.64 Rmt
Sixty Four Only
1:3(1cement:3fine sand) etc complete.
Mixing and spreading of goods oil and mannure- Mixing earth and sludge or manure in the
Rupees Thirty One And Paise Twenty Eight
221 170.95 required proportion specified or directed by the Officer-in-charge 31.28 Cmt
Good garden soil Supplying and stackingof good earth at siteincluding royalty and carriage
up to 5km complete (earth measured in stacks will be reduced by 20% for payment Rupees Four Hundred Forty One And Paise
Thirty Two Only
Cowdungmanure Supplying and stacking of well decayed cattle manure at site including
royalty and carriage up to 5k.m. lead complete (cattle manure measured in stacks will Rupees Two Hundred Eleven And Paise
reduced by 8% for Payment). Eighty Four Only
Treeplantation: Digging holes in ordinary soil and refilling the same with the excavated
earth mixedwith manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume
of earth after reduction by 20%: 1 part of stacked volume of manure after reduction by 8%)
Rupees Thirty Seven And Paise Forty Five
224 125.00 flooding with water, dressing including removal of rubbish and surplus earth, ifany,with all 37.45 Each
lead sand lifts (cost of manure, sludge or extra good earth if needed to be paid for
separately) 2.14.3 Holes 60 cm dia, and 60 cm deep
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the
excavated base to a further depth of 30cm, refilling the excavated earth after breaking
clods andmixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of
earth after reduction by 20 %: one part of stacked volume of sludge or manure after
reductionby 8%), flooding with water, filling with earth if necessary,watering and finally Rupees One Hundred Ninety And Paise
fine dressing, leveling etc. including stacking and disposal of materials declared Seventy Four Only
unserviceable and surplus earth by spreadingand leveling as directed,with in a lead of 50m,
lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of
existing ground prepared with proper level and ramming with required tools wooden and
than rolling the surface with light roller make the surface smoothen and light watering the Rupees Seventy Four And Paise Eighty Nine
same maintenance for 30 days or more till the grass establish properly,as per direction of Only
officer in charge
Plantation of Trees at site i/c watering and removal of unserveiceable material’s as per
227 75.00 direction of officer in charge (excluding cast of plant & water) 6.25 Rupees Six And Paise Twenty Five Only Each
Plantation of Shrubs, at site i/c watering and removal of unserveiceable material’s as per
228 50.00 direction of officer in charge (excluding cast of plant & water) 3.12 Rupees Three And Paise Twelve Only Smt
Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-
pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends
Rupees Two Hundred Forty Eight And Paise
229 188.50 prepared for collar joints including testing of joints complete.with all lead and lift etc. with 248.67 Rmt
Sixty Seven Only
all lead and lift etc.(B) 150mm
Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-
pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends Rupees Six Hundred Sixty Five And Paise
230 50.00 prepared for collar joints including testing of joints complete.with all lead and lift etc. with 665.48 Rmt
Forty Eight Only
all lead and lift etc.(C) 300mm
Earthwork for embankment including breaking clods, dressing with all lead and lift
Rupees Two Hundred Thirty Nine And Paise
231 6870.13 (excluding watering and consolidation)(E) From Borrow area within 3.0 Km. lead 239.07 Cmt
Providing and fixing various Outdoor Gym equipments including 2 no of Air Walker
Outdoor Gym Equipment , 2 no of Cross Trainer Outdoor Gym ,1 no of Double Chest
Presser , 1 no of Triple Standing Twister ,1 no of Leg Press Outdoor Gym and 1 no of Single
Chest Cum Seating Puller for garden at sonipur lake made out of best quality ISI Marked
mild steel material, with proper bends, welding and Holdfast nut, bolts. Type: Carousel
Material: FRP+ steel .The finishing of all equipment including fabrication ,welding grinding
FRP material should be of approved quality .The various Outdoor Gym equipments should Rupees Two Lakh(s) Ninety Five Thousand Complete
be elegant , user friendly smooth in operation and finished in powder coating in Four Hundred Twenty Five Only set
prescribed color only The various material used in gym equipment should of best quality
material and hard ware up to satisfaction of engineer . The open gym all equipment should
be fix at specific location in to the ground with necessary RCC foundation all necessary civil
work including finishing and painting as directed by engineer in charge & architect
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing various play Merry Go Round equipments made out of best quality ISI
Marked FRP material, with proper bends, welding and Holdfast nut, bolts.• Type: Carousel
Material: FRP+steel Power: 2-7 kw Fixing in to the ground as directed by Architect engg. In Rupees Thirty Three Thousand Four Hundred Complete
charge The welding to smooth paint in prescribed colour quantity material and hard ware Fifty Six And Paise Twenty Five Only set
up to satisfaction of eng.
Providing and fixing various play Double Board See Saw equipments made out of best
quality ISI Marked FRP material, with proper bends, welding and Holdfast nut, bolts.
Equipment should be required area: 1.5 mt x 3.5 mt Outer frame should be made by
mm IDGI pipe connected with 50 mm IDGI Center pipe handle should be made by 20 mm
Rupees Twenty Thousand Four Hundred Complete
234 1.00 IDGI pipe. Total height 0.4 mm from ground level. 4 nos. of sheet made by 5 mm thick FRP 20482.80
Eighty Two And Paise Eighty Only set
with proper seating arrangement grouted in CC. foundation base All Equipments paint by
layer of P.U. paint in multi-color or oven baked powder coated whichever is feasible and
possible Fixing in to the ground as directed by Architect engg.
Providing and fixing various play FRP Nursery Tiny Mini Multiplay System equipments made
out of best quality ISI Marked FRP material, with proper bends, welding and Holdfast nut,
bolts.Eouipment Should required area : 3 meter X 0.6 meter ,Platform height from ground
level: 0.9 meter (made by 32 mm N.B) Leg support and ladder: Made from steel frame with
16 G. Thick (RC) sheet, 1.54 mm thick Railing: Made from 20 mm N.B.M.S. Pipe. Slide Rupees Thirty Three Thousand Nine Hundred Complete
length: 1.8 mt with 5 mm thickness Slide chute: 0.5 mt wide Grouted: In C.C. base system 3 Thirty Six Only set
layer of P.U. Paint in multi - color or oven baked powder coated whichever is feasible and
possible Fixing in to the ground as directed by Architect engg. In charge
Providing and fixing Yellow and Black FRP Playground Swing Arch, Age Group: 3-12 Years
equipments made out of best quality ISI Marked Metal,FRP material, with proper bends,
welding and Holdfast nut, bolts.Eouipment Should required Area : 6.0 M X 1.5 M ,Height :
2.4 Meter Swing Seats : 4 Nos Rubber Belt 9mm Thick , Accessories : 4 Nos. Jhula Kada / Gi Rupees Forty Four Thousand Six Hundred Complete
Chain 8mm, Load Capacity 100 Kg ,Seating Capacity 04 SEATER layer of P.U. Paint in multi One And Paise Sixty Only set
- color or oven baked powder coated whichever is feasible and possible Fixing in to the
ground as directed by Architect engg. In charge
Painting Two coats over & including a priming coat on new steel and other metal surfaces
237 15.00 with enamel paint, brushing interior to give an even shade including cleaning the surface of 34.68 Rupees Thirty Four And Paise Sixty Eight Only Smt
all dirt, dust and other foreign matter.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Painting Two coats (excluding priming coat) on new steel and other metal surfaces with
enamel paint, brushing interior to give an even shade including cleaning the surface of all Rupees Eighty Seven And Paise Eighty One
dirt, dust and other foreign matter. Only
Steel work, welded in built up sections framed work including cutting, hoisting, fixing in
position and applying a priming coat of read lead paint. (A)In beams and joists, channels
Rupees Five Thousand Eight Hundred
239 4.30 angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip 5818.65 Qntl
Eighteen And Paise Sixty Five Only
and jack rafters, purlins conneted to common rafters and the like.
Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid
on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush Rupees Nine Hundred Seventeen And Paise
pointing in white cement. Twenty Five Only
Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on
10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement Rupees One Thousand Seventy Three And
slurry Paise Ninety Only
Providing & laying weep hole in Aburtments, and returns by using A.C. pipe of 100mm
Rupees Eighty Four And Paise Ninety Five
242 10.60 including laying in proper grede and jointing the completed as per detailed specification 84.95 Rmt
Providing and laying rubble for apron (each stone weighting not less than 40Kg.) including Rupees One Thousand Forty One And Paise
243 2.48 and packing and filing in the interstices with quarry-spalls. 1041.05 Cmt
Providing and laying - Fitter Media 600mm thick directed at the back of abutments, returns Rupees One Thousand Two Hundred Forty
244 1.98 and wing walls as per detailed specifications. 1248.74 cmt
Eight And Paise Seventy Four Only
(a) Drilling of pilot bore hole 250/ 300 mm dia(b) Reaming of 250 mm dia pilot bore to 550 Rupees Eight Hundred Forty Seven And Paise
245 100.00 mm dia bore hole 847.39 Rmt
Thirty Nine Only
(b) Reaming of 250 mm dia pilot bore to 550 mm dia bore hole including assembling Rupees Five Hundred Twenty One And Paise
246 100.00 lowering housing casing, strainer pipes with gravel packing, clay balls packing etc. 521.16 Rmt
(c) Cement sealing by means of mud pump without cost of cement. Rupees Fifteen Thousand Fourteen And Paise
(d-a) Development of each water bearing zone coming across the depth of tube well by
lowering 100 mm dia drop line & 32 mm dia GI air line with suitable capacity air Rupees Twenty Five Thousand One Hundred
compressor for min. 06 running hours till the availability of sand free discharge Eighteen And Paise Seventy Only
(d-b) Charges of air compressor of 900 cfm / 200 psi capacity for minimum 6 running hours. Rupees Thirty Thousand Nine Hundred
249 2.00 06 running hours. 30916.10 Job
Sixteen And Paise Ten Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
(a) Supply of 250 mm dia ERW blank pipes as per IS 4270 of min. 6.89 mm thickness . Rupees One Thousand Eight Hundred
Seventy And Paise Fifty Two Only
(b) Supply of 250 mm dia cage type "V" wire wound low carbon galvanised screen pipe. ( i ) Rupees Two Thousand One Hundred Thirty
251 30.00 Having size of 1.0 mm (Heavy Grade) 2133.12 Rmt
Three And Paise Twelve Only
(c) Supply of misc. bore materials.1. M. S. bore clamps with 03 holes on either side with Rupees Two Thousand Four Hundred Forty
252 2.00 nuts & bolts of std. make and of suitable size. 900 mm x 100 mm x 16 mm 2440.16 Pair
And Paise Sixteen Only
2. Bore plug having 100 mm height made from 5 mm thick MS plate with 3 holes at equal
distance on circumference for nut bolts type locking arrangement with nut bolts & lock Rupees Seven Hundred Five And Paise Ninety
nuts of std. make complete. Nine Only
3. M. S. bail plug having length of 0.45 mts from medium class pipe as per IS.
Rupees Nine Hundred Seven And Paise
Ninety Nine Only
4. Steel bent plates suitable to 250 mm diapipe of size 200 mm x 150 mm x 6 mm.
Rupees Ninety Seven And Paise Ninety Seven
Supply of ISI mark cement
Rupees Seven Thousand One Hundred
Twenty Eight And Paise Fifty Eight Only
Supply of well sorted "Sevaliya" gravels of size 4 mm to 6 mm including carting,
Rupees Two Thousand Two Hundred Ninety
257 23.36 loading,unloading & stacking at site of work 2295.73 Cmt
Five And Paise Seventy Three Only
Supply of clay ball having size of 25 mm to 50 mm.
Rupees Eight Hundred Forty Nine And Paise
Electro logging of bore hole.
Rupees Fourteen Thousand One Hundred
(a) Drilling of pilot bore hole in all strata by mud flush DR Rig 250/ 300 mm dia.
Rupees Eight Hundred Sixty Five And Paise
Fifty Seven Only
(b) Reaming of 250 mm dia pilot bore to 550 mm dia bore hole including assembling
Rupees Five Hundred Thirty Five And Paise
261 120.00 lowering housing casing, strainer pipes with gravel packing, clay balls packing etc. 535.30 mtr.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
(c) Cement sealing by means of mud pump without cost of cement.
Rupees Thirteen Thousand Four Hundred
Five And Paise Seventy Three Only
(d-a) Development of each water bearing zone coming across the depth of tube well by
lowering 100 mm dia drop line & 32 mm dia GI air line with suitable capacity air Rupees Twenty Eight Thousand Fifty Four
compressor for min. 06 running hours till the availability of sand free discharge. And Paise Seventy Seven Only
(d-b) Charges of air compressor of 900 cfm / 200 psi capacity for minimum 6 running hours.
Rupees Twenty Seven Thousand Six Hundred
264 1.00 06 running hours. 27603.30 job
Three And Paise Thirty Only
supply and delivery of ISI marked ERW M.S.pipes conforming to IS: 4270/2001 with latest
Rupees Three Thousand Six Hundred Five
265 80.00 amendment 250 mm dia (Min.7.10 mm thickness) 3605.70 mtr.
And Paise Seventy Only
supply and delivery of cage type Trapezoidal shape ( ' V ') wire wound low carbon,
Galvanized screen pipe and Stainless Steel Screen pipes, confirming IS: 8110 Low carbon, Rupees Three Thousand Eighty Eight And
Galvanized screen pipe 250 mm dia HEAVY ) 1.00mm Slot size Paise Fifty Eight Only
Clamp made from M.S. plate with 3 holes on either side with nuts & bolts of Std. Make and
Rupees Two Thousand Two Hundred Eighty
267 4.00 suitable size.900 mm X 100 mm X 16 mm flat suitable for 300 mm dia.P 2287.92 Pair
Seven And Paise Ninety Two Only
Bore plug having 100 mm height made from M.S. plate with 3holes at equal distance on
circumference for nut-bolts type,locking arrangement with nuts-bolts & lock nuts of std. Rupees One Thousand One Hundred Sixty
Make complete. Suitable for 250 mm dia pipe. One And Paise Sixty Two Only
3. M. S. bail plug having length of 0.45 mts from medium class pipe as per IS.
Rupees One Thousand Sixty Five And Paise
4. Steel bent plates suitable to 250 mm diapipe of size 200 mm x 150 mm x 6 mm.
Rupees Ninety One And Paise Seventy One
Supply of ISI mark cement.
Rupees Six Thousand Three Hundred Sixty
Five And Paise Two Only
Supply of well sorted "Sevaliya" gravels of size 4 mm to 6 mm including carting,
Rupees Two Thousand Forty Nine And Paise
272 11.30 loading,unloading & stacking at site of work. 2049.29 Cu.mt.
Twenty Nine Only
Supply of clay ball having size of 25 mm to 50 mm.
Rupees Seven Hundred Fifty Eight And Paise
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Electro logging of bore hole.
Rupees Eighteen Thousand One Hundred
Chemical analysis charges of water sample.
275 1.00 1010.00 Rupees One Thousand Ten Only job
Providing electric motor driven submersible pump set conforming to IS 8034-1981
withmotor conforming to IS 9283-1979 workingat 3 phase, 400/440 volts, 50 Hertz AC
Rupees Forty Four Thousand Seven Hundred
276 2.00 supply and 2900 rpm.Category : 6.1 Discharge : 510 LPM, Head : 123 Mtrs, HP : 25 44740.98 No
Forty And Paise Ninety Eight Only
Providing ATS control panel board for 15 hp subnercible pump detail specification as per
GWSSB R/C : ATS (A. T. S. from 21 to 30 HP) Rupees Twenty Four Thousand Five Hundred
Eighteen And Paise Seventy Six Only
Providing flat PVC submersible cable of Size : 1 x 3 x 35 square mm copper cable Rupees Four Hundred Sixty Three And Paise
Fifty Nine Only
Providing heavy duty GI column pipe threaded at both ends of 3 meters length conforming
to IS 1239 (part-1) with coupling at one end and thread protector at other end. including
all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, Rupees Seven Hundred Nine And Paise Two
unloading,( GWSSB CIVIL SOR) conveyance to departmental stores, stacking etc. complete. Only
Providing support clamps of size 4450 mm X 65 mm X 10 mm flat suitable to 65/80
Rupees Five Hundred Forty Seven And Paise
280 2.00 mmdia.Pipe 547.42 Pair
Providing following specials.(1) Heavy duty G. I. coupling of 100 mm length and 8 mm
thickness and 8 TPI threaded as per IS with G. I. nipple 8 TPI threaded at one end & 11 TPI Rupees Two Hundred Thirty Eight And Paise
threaded at other end of 125mm length suitable to 80 mm dia. Pipe. Thirty Six Only
bore plug 100 mm height made out of M S plate with 3 holes at equal distance on
cercrunferance for nut bolt type ;ocking arrangement with nuts bolt & lock nut of Rupees Five Hundred Thirty And Paise
standrand make from 5 mm thick M S plate suitble for 200 mm dia pipe Twenty Five Only
(3) Heavy duty 90 degree G. I. bend suitable to 80 mm dia. Pipe. Rupees Eight Hundred Fifty Eight And Paise
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Lowering of sub pump with required nos. and size of column pipes by means of proper
chain pulley block and pipe wrenches after checking threads of each pipe with coupling to
Rupees Two Thousand Two Hundred Twenty
284 1.00 take load of pump set and pipe assembly filled with water Above 90 metersdepth including 2222.00 No
Providing and fixing of horizontal monoser submersible pump set 3 phase 400/440, 50c/s A
C supply & 2900 RPM category SM 4.5 ,12.5 HP of 1600 LPM discharge & 26 mts. Head Rupees Twenty Eight Thousand Two
285 2.00 with necessary elecrtical motor etc complete as directed by engineer in charge - 4.5. 28257.78 Hundred Fifty Seven And Paise Seventy Eight Set.
Providing ISI mark GI pipes with coupling of medium duty as per IS 1239 /1990 including Rupees Seven Hundred Eighty And Paise
286 35.00 carting, loading & unloading etc. of 100 mm size. 780.73 MTR.
Seventy Three Only
Providing control panel board for above sub pump with 5 KVAR capacitor Type & Range : Rupees Eleven Thousand Forty Three And
287 1.00 Star / Delta (11 HP to 15 HP) 11043.34 No.
Paise Thirty Four Only
Providing flat PVC submersible copper cable of Size : 1 x 3 x 4 square mm. Rupees Sixty Eight And Paise Seventy Three
Providing and supplying ISI mark CI D/F Sluice Valves , Butterfly Valves & Reflux Valves of
following class and diameter including all taxes, insurance, transportation, freight charges,
octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking Rupees Two Thousand Six Hundred Ninety
etc. complete. Sluice valves with ISI mark only PN-1 With hand wheel /cap operated (PD Six And Paise Seventy Only
type short body)80mm dia
Providing and supplying ISI mark CI D/F Sluice Valves , Butterfly Valves & Reflux Valves of
following class and diameter including all taxes, insurance, transportation, freight charges,
octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking Rupees Two Thousand Eight Hundred Ninety
etc. complete. Sluice valves with ISI mark only PN-1 With hand wheel /cap operated (PD Eight And Paise Seventy Only
type short body)100 mm dia
Providing & fitting GI specials such as bends,flanges, reducer, nipple, MS hardware, rubber
packings etc. with required excavation & refilling for connection to pipe line etc. complete. Rupees Five Thousand Five Hundred Fifty
Providing TPIC switch fuse unit withneutral link for 415 volts, erected on polished wooden
block of 60 x 60 x 2.5 cm size of min. 63 amperes capacity with rewirable fuse of category Rupees Four Thousand Five Hundred Forty
Erection, testing & commissioning of mono submersible pump set complete with fitting of
293 2.00 valves, laying of pipes, cable jointing etc.complete job. 9090.00 Rupees Nine Thousand Ninety Only Job
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing & erecting funnel type earthing having earth plate of following size buried in
specifically prepared earth pit 03 mts. below ground with40 Kg charcoal & salt with
alternate layers of charcoal & salt, 20 mm dia GI pipe with funnel with wire mesh for
watering & bricks masonary block, CI cover complete as per para 7.3 of IS 3043 with Rupees Three Thousand Eight Hundred Thirty
294 1.00 necessary length of double copper 6 SWG wire bolted with lug to the plate and covered in 3833.96 Job
Three And Paise Ninety Six Only
12 mm dia. GI pipe 2.5 mts. long complete connected to the nearest switchgear with end
socket as perdirection & duly tested by earth tester as per drawing with following
specifications with 30 x 30 x 0.35 cms CI earth plate
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are
of ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to 10 mtr
length , in below type of pipe erected with 6A Modular type switch / bell push &
accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,
Rupees Five Hundred Eighty Two And Paise
295 1392.00 single mounting base frame covered with textured/metallic/white front plate modules 582.77 Pts
Seventy Seven Only
erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI
marked 1.1 kV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in
below type of pipe erected with 6A Modular type switch and hum free EME step type
electronic fan regulator mounted and accessories with earth continuity of following type
Rupees Eight Hundred Ten And Paise Two
296 230.00 erected on PVC / Metallic/Wooden box, single mounting base frame covered with 810.02 Pts
textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe
erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class
Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in
below type of pipe erected complete with Modular type switch & 5 pin Plug erected on
PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in Rupees Six Hundred Twelve And Paise Six
297 272.00 wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 a 612.06 Pts
switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (f) with
medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected
on PVC / Metallic/Wooden box, single mounting base frame covered with textured / Rupees Three Hundred Nine And Paise Six
298 732.00 metallic/white front plate modules erected on / in wall / ceiling with following type 309.06 Nos
accessories Cat III
Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of
sq.mm (green) both are of .ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper
wires erected in below type of pipe with 6A Modular type switches and following type of
accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered Rupees Seven Hundred Twenty Five And
299 158.00 with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe 725.18 Nos
Paise Eighteen Only
erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling
complete Cat III
Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured / metallic/white
Rupees One Hundred Eighty And Paise
300 376.00 front plate , modules erected with necessary connections as per site situation directed by 180.79 Nos
Seventy Nine Only
Engineer In charge. (9) 16 Amp. SP One way Switch.
Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured / metallic/white Rupees One Hundred Ninety Nine And Paise
301 376.00 front plate , modules erected with necessary connections as per site situation directed by 199.98 Nos
Ninety Eight Only
Engineer In charge (10) 6/16Amp. Universal socket
Providing following type of Modular Type Accessories mounted with pvc / metallic box,
single mounting base frame covered with textured / metallic front plate , modules erected Rupees Four Hundred Ninety Seven And
302 94.00 with necessary connection. As desired by Engineer In charge (22) 16/20/25 Amp. Modular 497.93 Nos
Paise Ninety Three Only
Starter for Motor / A.C. Unit Complete
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete
to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes Rupees Thirty Three And Paise Thirty Three
303 3280.00 fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as 33.33 Mtr.
directed (b) 25 mm
Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking
arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with
304 2510.00 accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & 36.36 Rupees Thirty Six And Paise Thirty Six Only Mtr.
erected on wall / ceiling of following size . (3) 32 mm
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl,
chloride rigid material with ignition free and flame proof confirming BS with necessary end Rupees Two Hundred Seventy Seven And
305 270.00 caps Internal and external bend, flat bends, coupler, tee etc..All necessary accessories and 277.75 Mtr.
Paise Seventy Five Only
measuring of following sizes (1) 75 mm x 50 mm trunking
Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded
Copper conductor wire in following type of pipe to be erected concealed in /flushed on
wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green Rupees Seventy Eight And Paise Seventy
colour for earth continuity of following size (a) with medium class Rigid PVC pipe and Eight Only
accessories (a) 2 wire 1.5 sq. mm
providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded
Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with
sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Rupees One Hundred Four And Paise Three
continuity of following size (a) with medium class Rigid PVC pipe and accessories (b) 2 wire Only
providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded
Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with
sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Rupees One Hundred Forty And Paise Thirty
continuity of following size (a) with medium class Rigid PVC pipe and accessories a) 2 wire Nine Only
providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded
Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with
sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Rupees One Hundred Eighty Four And Paise
continuity of following size (a) with medium class Rigid PVC pipe and accessories b) 2 Eighty Three Only
providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded
Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with
sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Rupees Three Hundred Twenty Six And Paise
continuity of following size (A) with medium class Rigid PVC pipe and accessories (h) 4 wire Twenty Three Only
Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI
marked copper wires of following size to be erected as directed. (h) 2.50 Sq.mm 3 core
311 476.00 96.96 Rupees Ninety Six And Paise Ninety Six Only Mtr.
round PVC sheathed
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing & erecting Switch board for Computer or electric apparatus consisting of
following modular type accessories mounted with PVC / Metallic concealed/open box
with single mounting base frame covered with textured/metallic /white front
plate,modules erected with necessary connections as directed Rupees One Thousand One Hundred Thirty
1 no. 6A/16A universal plug-switch combined. Three And Paise Twenty Two Only
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories
Decorative call bell Ting-tong box type 250 volts complete erected Rupees Seventy One And Paise Seventy One
providing and erecting Mains with ISI marked, 1.5kV grade electrolyte multi stranded,
annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -
erected in existing pipe of following size (Specifically for control panel, relays, power Rupees Thirty Four And Paise Thirty Four
switchgears, motor starters & control wiring) with required size of copper lugs, nuts and Only
bolts if required. (c) One wire 2.50 sq. mm
(d) One wire 4.00 sq. mm
315 220.00 46.46 Rupees Forty Six And Paise Forty Six Only Mtr.
(e) One wire 6.00 sq. mm
316 214.00 70.70 Rupees Seventy And Paise Seventy Only Mtr.
(f) One wire 10.00 sq. mm Rupees One Hundred Fifteen And Paise
(g) One wire 16.00 sq. mm Rupees One Hundred Seventy Seven And
Paise Seventy Six Only
(h) One wire 25.00 sq. mm Rupees Two Hundred Ninety Five And Paise
Ninety Three Only
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt
assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet
Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &
corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor
more than 0.95, THD < 15%, Rupees One Hundred Sixty Five And Paise
CCT 3000 K to 6500K, Sixty Four Only
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 % (A) Tube Light with integral driver(i) 5-10 Watts, Surge-2 KV, IP-
20, conventional 1 to 2 feet
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt
assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet
Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &
corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor
more than 0.95, THD < 15%, Rupees Five Hundred Thirty Five And Paise
CCT 3000 K to 6500K, Thirty Only
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 % (A) Tube Light with integral driver (v) 36-40 Watts, Surge-2 kV,
IP-20, conventional 4 feet Cat III
Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage,
minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser,
mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, Rupees One Hundred Twelve And Paise
with PC diffuser suitable LAMP holder (ii) 5 to 8 watts Eleven Only
Supplying and erecting LED Indoor fittings with LEDs of wattage 0.2 watt to 0.5 watt
assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet
steel confirming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V.
& corrosion resistance with diffuser housed in aluminium casted body with company
mark/name 120 to 300 V, power factor more than 0.9, THD< 10%, CCT 3000 K to 65 K. Rupees Four Hundred Twenty Seven And
323 126.00 Luminiare efficacy > 85 lumens/watt. LED efficiency 110 lumens/watt, LED driver efficiency 427.23 Nos
Paise Twenty Three Only
> 85%. CREE/OSRAM/PHILIPS Lumileds/ NICHIA/ SEOUL/ Bridgelux make LED used for
luminiare (A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision
for spring loaded mounting clips complete.IP20 (b) 11-15 watts, surge-2 KV
Supplying and erecting LED street light / Flood light fittings with High power White LEDs
wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast aluminum housing with smooth finish powder
coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or embossed 160 to 270 Rupees Four Thousand Two Hundred Forty
324 15.00 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, 4248.06 Nos
Eight And Paise Six Only
Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-
79 & LM-80 certificates) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light
must have 440VAC line supply with over-voltage protection. (ii) 48 - 59 Watts
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Operational Handle Assembly Complete for (i) 32 / 63 / 125 Amps Rupees Four Hundred Twenty And Paise
Operational Handle Assembly Complete for (ii) 200 / 250 / 320 / 400 / 630 / 800 Amps Rupees Seven Hundred Fifty Four And Paise
Forty Seven Only
Operating Shaft (Extensible) for (i) 32 / 63 / 125 Amps Rupees One Hundred Twelve And Paise
Operating Shaft (Extensible) for (ii) 200 / 250 / 320 / 400 / 630 / 800 Amps Rupees One Hundred Fifty Five And Paise
Fifty Four Only
Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S.
sheet, dust & vermin proof having hinged door with rubber gasket and necessary busbar
supports with COPPER busbar having current density not more than 1.6 Amp. / sq.mm
(Rated current / cross section area) duly wrapped with colour insulation tape for phase Rupees Five Thousand Seven Hundred Thirty
sequence, three phase & neutral each suitable for following current capacity with One And Paise Seventy Five Only
necessary painting mounted on wall or pedestal frame of required size with necessary
connections. (B) Suitable for 200 Amp. capacity
Supplying KITKAT pattern porcelain cut-out fuse with base of following current capacity Rupees Four Hundred Twenty And Paise
330 9.00 erected on existing block board(vi) 200 A. 500 V. 420.16 Nos
providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate
on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. Rupees One Hundred Twenty Three And
confirming to IS 8828/1996 with ISI Mark Paise Twenty Two Only
Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve)
having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following Rupees Three Hundred Sixty Three And Paise
capacity (B) 40 Amp. Sixty Only
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having
10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Rupees Eight Hundred Eleven And Paise
(c)63 Amp.. Three Only
Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB.
Rupees One Hundred Seventy Six And Paise
Seventy Five Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface
mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &
IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used Rupees Three Hundred Fifty Five And Paise
of same company of MCB to be used) suitable for (A) single phase incoming and horizontal Fifty Two Only
single phase outgoing (a) single door (IP-30) (i)4 way
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface
mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &
IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used Rupees Two Thousand Four Hundred Forty
336 42.00 of same company of MCB to be used) suitable for (b) sheet steel double door (IP-43) (B) 2445.21 Nos
Five And Paise Twenty One Only
three phase incoming and single phase horizontal type outgoing Per phase isolation type
(PPI) (iii)8 way
providing and erecting Approved make RCCBs conforming to IS: 12640 and having
sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for
operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with Rupees Two Thousand Four Hundred Fifty
all advance feature & do not incorporate any electronic component. for following Max. Eight And Paise Thirty Four Only
rating erected as directed (ii) 40Amps. DP
Providing and erecting Approved make RCCBs conforming to IS: 12640 and having
sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for
operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & Rupees Three Thousand Three Hundred
tripping with all advance feature & do not incorporate any electronic component for Forty Four And Paise Eleven Only
following Max. rating erected as directed. (iii) 63 Amps. FP
Providing and erecting Annealed bare Copper wire 4.064mm to 1.626mm. Rupees Seven Hundred Ninety Four And
Paise Eighty Seven Only
Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Rupees Seven Hundred Ninety Four And
340 50.00 Transformer, LT panel board, Motors etc. using copper clamp. 794.87 kg
Paise Eighty Seven Only
Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised
iron pipe with coupling and buch buried in specially prepared earth pit complete with Rupees Three Hundred Sixty Eight And Paise
necessary 8 SWG earth wire. Sixty Five Only
For using salt and charcoal / coke as required for pipe type earthing.
Rupees One Hundred Seventy One And Paise
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing
Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free
hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,
Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of
12mm with constant ohmic value surrounded by highly conductive compound with high
charge dissipation suitable for following type of applications with chamber and heavy duty
cover. (A)(approved make OEM has to submit test certificate including value of earth
resistance of installation duly stamped and signed by agency and officer Incharge has to
ensure the value of earthing resistane mentioned in test Certificate) & having back filling Rupees Four Thousand Five Hundred Ninety
compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as One And Paise Forty Six Only
per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)
Back fill Compound :- Earthing compound should be capable to retain moisture for long
time Necessary test report must be submitted by Agency(a) For Electrical Installation up to
440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing,
A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing
in normal soil. Rupees Eight Thousand Six Hundred Thirty
Length of Pipe : 3.00 mtrs Six And Paise Fifty One Only
Back filling Compound :2 nos Bags of 25 Kg.
Supplying and erecting nuwood 12mm thick on existing angle iron frame or wooden patti Rupees Three Hundred Eighty Five And Paise
Eighty Two Only
Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid
Copper conductor for 1.1 kV. to be laid on wall with necessary clamps or in existing Rupees Four Hundred Fifty Five And Paise
trench / pipe at road crossing or floor of following size of cables. (B) 4 core 4 Sq. mm Fifty One Only
Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper
conductor for 1.1 kV. to be laid on wall with necessary clamps or in existing trench / pipe Rupees One Thousand Eight Hundred Eighty
at road crossing or floor of following size of cables. (C) 4 core 25 Sq. mm One And Paise Sixty Three Only
Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the
348 430.00 fault all over the run and backfilling the same and making the surface as normal ground. 55.55 Rupees Fifty Five And Paise Fifty Five Only Mtr.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Rupees Three Hundred And Paise Ninety
349 120.00 Engineer-in-charge. (B) 50 mm dia 300.98 Mtr.
Providing & laying approved make Double walled corrugated pipes (DWC) of
polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same
350 430.00 material at required depth in existing trench for laying of cable. below ground / road 62.62 Rupees Sixty Two And Paise Sixty Two Only Mtr.
surface for enclosing cable (A)50 mm inner dia
Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with
condenser A.C. 230V.50 Hz.1200 mm. sweep complete, canopy erected on existing hook or Rupees One Thousand Five Hundred Ninety
clamp with earthing. [Make shall be approved by Engineer in charge] Six And Paise Eighty One Only
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up
to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box Rupees One Hundred Eight And Paise Seven
complete erected concealed in Ceiling with necessary finishing. Only
Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.
353 230.00 18.18 Rupees Eighteen And Paise Eighteen Only Nos
Supplying & erecting approved make low noise decorative exhaust fan having square frame
Rupees One Thousand Seven Hundred Three
354 126.00 ABS body with inbuilt lowers & square frame. (B) frame.250mm with 1350 RPM 1703.87 Nos
And Paise Eighty Seven Only
Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole
should be made as per IS. and shall be coated with hot dip galvanizing as per IS
2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of
terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB
Mounting, stud type terminal and arrangement for cable termination to be erected With Rupees Nine Thousand Eleven And Paise
Suitable foundation (Included) as per details given by manufacturer considering site Twenty Two Only
requirement.(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4-M20 Bolts and 600mm long with necessary G.I. J
Bolts .Approx Pole weight 59 kg
Providing and erecting street light pole bracket comprising main B Class MS pipe of
cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx.
45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient
fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per Rupees Five Hundred Sixty One And Paise
site condition & suitable welded stiffener reducer and nipple with check nut complete Fifty Six Only
painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU
paint. paint with following nos of arms. [A] Single Arm bracket 1 Mtr
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S.
Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be buried in
ground to have appropriate erection to work uniform until erected with cement concrete
foundation and 45 cm high bricks work finishing with plaster etc. hinged double door
internally supported on both side, with internal and outside looking arrangement with look
and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with Rupees Three Thousand Five Hundred Ninety
nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside and out side with Five And Paise Sixty Only
three tank powder coated paint. section pillar roof should be without joint with water
leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X 45 cm
section pillar fabricated from 16 Gauge MS Sheet with angle iron legs 45 cm long made
from 35 X 35 X 5 mm thick MS angle.
Providing and erecting approved make light control unit suitable to operate on 230V +20%
having ON/OFF delay time of 30-50 seconds and having facility for Auto/manual system Rupees Two Thousand Two Hundred Sixty
358 2.00 having two LDR lens to intensity light having capacity of 5A complete erected on section 2265.43 Nos
Five And Paise Forty Three Only
pillar with pipe and stand.
Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per
Rupees Two Thousand Seven Hundred Eighty
359 2.00 direction Cat III [D] 4 pole 440V 40 Amp. 2782.55 Nos
Two And Paise Fifty Five Only
Supplying and erecting Direct - On - Line Starter with 18 A. rating contactor and with
Amp. 18A range directly operated in totally insulated elegant enclosure for single phase
Rupees Two Thousand One Hundred And
360 3.00 operation up to 3 HP as per IS 13947 complete erected on P.W. Block with necessary 2100.80 Nos
Paise Eighty Only
connection. Cat III
Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and with 4-14A.
range, directly operated thermal overload relay in sheet steel enclosure for 3phase
Rupees Two Thousand Forty Six And Paise
361 4.00 415V.50 Hz. A.C. motor up to 7.5 H.P.complete erected on P.W. Block with necessary 2046.26 Nos
Twenty Six Only
connection. Cat III
Supplying of single phase submersible pump set suitable for 100 mm size or more dia bore
well having motor capacity and discharge as under with necessary panel box (c) Motor
Rupees Twenty Thousand Two Hundred
362 3.00 rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr head suitable for 32 mm 20224.24 Nos
Twenty Four And Paise Twenty Four Only
dia. delivery pipe Cat.II
Supplying submersible pump set suitable for bore of 100 mm. dia. or more having three
phase motor capacity not more than 5 H.P. with following capacity .. (b) (16 stage) 140 to
Rupees Twenty Four Thousand Six Hundred
363 3.00 180 LPM discharge at 96 to 69 mtrs. head respectively suitable for 50mm dia. delivery pipe 24611.68 Nos
Eleven And Paise Sixty Eight Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
S.I.T.C. submersible pump set suitable for bore of 150 mm. dia. or more having three phase
motor capacity not more than 7.5 H.P. with following capacity . Lifting and Lowering taken
Rupees Thirty Nine Thousand One Hundred
364 1.00 extra. (A) (12 stage) 280 to 240 LPM discharge at 90 to 104 mtrs. head respectively 39149.62 Nos
Forty Nine And Paise Sixty Two Only
suitable for 50mm dia. delivery pipe
Lowering of submersible motor pump set complete with required. Nos. and size of casing
pipes erected by means of proper chain pulley block & pipe wrenches after checking of
Rupees Two Thousand Five Hundred Sixty
365 6.00 threads of each pipe with coupling to take the load of the pump set and pipe assembly 2568.43 Per Job
Eight And Paise Forty Three Only
filled up with water.(B)Above 60 mtrs. and Up to 120 mtrs.
Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible
Rupees One Hundred Four And Paise Three
366 465.00 copper cable approved make of following Size. (b) 3 Core x 2.5 Sq. mm. 104.03 Mtr.
Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible
Rupees One Hundred Forty Six And Paise
367 120.00 copper cable approved make of following Size. (C) 3 Core x 4 Sq. mm 146.45 Mtr.
Forty Five Only
Supplying and erecting approved make panel mounting type Digital Voltmeter having
digits LED display, 0 to 750 AC Volts range erected on existing panel board with all Rupees One Thousand Two Hundred Seventy
connection, wiring etc .with manufacturers calibration certificate. Five And Paise Sixty Three Only
Supplying and erecting approved make panel mounting type Digital Ammeter having
digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate
Rupees One Thousand Five Hundred Fifty
369 3.00 on 500 Volt AC , erected on existing panel board with all connection, wiring etc .with 1558.43 Ea.
Eight And Paise Forty Three Only
manufacturers calibration certificate.
Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V Rupees Three Hundred Seventeen And Paise
370 6.00 on existing panel board with necessary connections. 317.14 Ea.
Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA
burden erected in existing CRCA box duly secured with insulating materials connected to Rupees Two Hundred Seventy Four And
the meter Paise Seventy Two Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing & erecting weather proof, dust & vermin proof, floor mounted front operated
indoor type cubical panel board necessary IP-42 and above protection as per approval
from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors,
16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting
angles/ flats channel including cutting, bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements & instruction of engineer-in-charge with
erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper Rupees Fourteen Thousand Nine Hundred
372 6.00 wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for 14902.55 Sq.Mtr
Two And Paise Fifty Five Only
measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,
sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice board,necessary ventilation,earthing strip
complete. The Panel shall be painted with epoxy powder coating. (B) The standard
companies switch gear shall be used and only manufacturers at CPRI approved factory (i)
with 350mm depth
Providing , erecting , fabricating the M.S. structure as per requirement on site
incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections
complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide Rupees Seventy Seven And Paise Seventy
with erection on site as per direction of engineer in charge with necessary grouting, Seven Only
cementing, plastering & finishing complete.
Providing and erecting Approved make Four pole moulded case circuit breaker having
breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed
thermal & magnetic release suitable to work on A.C.supply 50 Hz. with all internal Rupees Eight Thousand Eight Hundred Sixty
connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. One And Paise Seventy Four Only
ICS=100% of ICU only Cat IIi
Providing and erecting Approved make Four pole moulded case circuit breaker having
breaking capacity ICU of 35 KA. at 415 V. having Normal current rating 200A.with variable
Thermal & magnetic release suitable to work on A.C.supply 50 Hz. with all internal Rupees Seventeen Thousand Eight Hundred
connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing Forty Three And Paise Sixty Seven Only
ICS=100% of ICU only Cat III
Supplying & erecting approved make Four Pole 415V change over switch interior for panel
Rupees Twelve Thousand Three Hundred
376 3.00 mounting with operating mechanism A.C.23 duty confirming to IS for (D)200A 12322.00 Nos
Twenty Two Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars
with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. /
sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for
Rupees Three Thousand Two Hundred Two
377 6.00 phase sequence of following current carrying capacity, erected with necessary bus bar 3202.71 Rn.Mtr
And Paise Seventy One Only
supports /insulators, main cable socket to each bar, erected in existing cubical panel with
necessary connections. (B) Suitable for 200 Amp. capacity
SITC of 8mm dia Aluminium alloy Solid Round Conductor of material AlMgSi used in air
termination and down conductor system . Cross sectional area of conductor should be
Test Parameter: Rupees Two Hundred Fifty One And Paise
a.Lightning impulse current of 100kA for 10/350 µs Forty Nine Only
b.Electrical resistivity - 0.036 µΩm, Tensile strength - 120 to 240 MPa or N/mm², Salt spray -
No Sign of Corrosion.
Tested as per IEC 62561-2.
SITC of UV resistance Nylon/PU Conductor Holder for Parapet wall for holding 8 mm dia
Rupees Seventy Eight And Paise Seventy
379 18.00 Aluminium alloy round Conductor . 78.78 Nos.
SITC of UV resistance Nylon/PU roof conductor holder for flat roof with concrete block for
fixing 8 mm dia Aluminium alloy Solid Round Conductor in the terrace flat surface at every Rupees One Hundred Fifty Four And Paise
1 mtr. Fifty Three Only
SITC of Stainless Steel Folded clamp/Metal roof holder for 8-10 mm dia Aluminium alloy
Solid Round Conductor for horizontal Air terminal above metal sheet with fixing screws .
Rupees Three Hundred Forty Two And Paise
381 16.00 Test Parameter: Salt Spray Test ( IEC 62561-1) - No sign of Corrosion 342.39 Nos.
Thirty Nine Only
SITC of Adhesion glue for fixing matel roof conducter holder over the flat surface to meet
Rupees Four Thousand One Hundred Ninety
382 35.00 the requirment of IS/IEC - 62305 . 4190.49 Nos.
And Paise Forty Nine Only
SITC of Stainless steel Cross Connector for 8 mm dia Aluminium alloy round conductor &
10 mm Copper bonded conductor at cross junction. Rupees Eight Hundred Seventy Five And
383 35.00 Test Parameter 875.67 Nos.
Paise Sixty Seven Only
Salt Spray Test ( IEC 62561-1) - No sign of Corrosion
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
SITC of Expansion Piece with connector to compensate the expansion and contraction of
Solid Round Al. Conductor during temperature variations.Expansion piece should be
consider at every 20 mtr length of straight horizontal air termination and connected at
both the end with use of straight connector conductor .
Rupees Three Hundred Eighty Three And
384 18.00 Test Parameter: 383.80 Nos.
Paise Eighty Only
Electrical Resistivity Test-0.036 µΩm
Salt Spray Test - No Sign of Corrosion
Tested as per IEC 62561-1
SITC of Aluminium Straight conductor connector for interconnecting 8mm Aluminium
conductor to meets the requirement of IS/IEC 62305.Tested for Electrical , Mechanical and Rupees Ninety Eight And Paise Ninety Eight
chemical as per IEC 62561. Only
SITC of air termination rod of 3mtr length of material AlMgSi of diametre ø 16/10 mm
crimped on both the ends(Tappered Type). The rod shall be mounted with stainless steel
wall clamp and fixing accessories .
Test Parameter: Rupees Six Thousand Nine Hundred Forty
Mechanical Load Test for individual aluminium alloy rods - 120 to 280 N/mm² Eight And Paise Eighty Only
Salt Spray Test-No sign of corrosion
Tested as per IEC 62561-1&2
SITC of 8mm dia Aluminium alloy Solid Round Conductor of material AlMgSi used in down
conductor system . Cross sectional area of conductor should be 50 mm².
Test Parameter: Rupees Two Hundred Fifty One And Paise
387 250.00 a.Lightning impulse current of 100kA for 10/350 µs 251.49 Mtr.
Forty Nine Only
b.Electrical resistivity - 0.036 µΩm, Tensile strength - 120 to 240 MPa or N/mm², Salt spray -
No Sign of Corrosion.
Tested as per IEC 62561-2.
SITC of Parapet conductor holder for fixing 8mm Aluminium conductor on the parapet
Rupees Seventy Eight And Paise Seventy
388 20.00 surface to meet the requirement of IS/IEC - 62305 78.78 Nos.
SITC of Aluminium Straight conductor connector for interconnecting 8mm Aluminium
conductor to meets the requirement of IS/IEC 62305.Tested for Electrical , Mechanical and Rupees Ninety Eight And Paise Ninety Eight
chemical as per IEC 62561. Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
SITC of Lightning counter - LCD screen shows the number of lightning strikes, hour and date
of lightning events Buttons enable TIME/DATE setting and log viewing. Replaceable Rupees Sixty Five Thousand Three Hundred
battery, working life minimum five years, Complies with IEC/EN 62561-6. Fifty And Paise Three Only
SITC of Stainless Steel Test Joint with enclosure to interconnect between 8 mm Al. round
conductor to 10 mm copper bonded round conductor
Test Parameter: Rupees One Thousand Seven Hundred Ninety
Salt Spray Test for test joint plate -No sign of Corrosion Two And Paise Seventy Five Only
Tested as per IEC 62561-1
SITC of Rust resistant non corossive 10 mm dia Copper bonded round conductor used for
Earth termination inside the concrete and soil.
Test parameter:
Short circuit current test for copper bonded conductor:Test 6 kA ratings, as per cross Rupees Seven Hundred Sixteen And Paise
392 9.00 sectional area for 1 sec(IS3043/IEEE80); Electrical Resistivity before & after salt mist spray 716.09 Mtr.
test: 0.25µΩm max. Tensile Test 290 to 510 N/mm². Adhesion no peel or crack & Bend test
no seperation of Cu, Cu Coating thickness min. 70µm.
Tested as per IEC 62561-2.
SITC of Stainless steel Cross Connector for 8 mm dia Aluminium alloy round conductor &
mm Copper bonded conductor at cross junction.
Rupees Eight Hundred Twenty And Paise
393 9.00 Test Parameter 820.12 Nos.
Salt Spray Test ( IEC 62561-1) - No sign of Corrosion
SITC of OEM make Connecting Point
Test Parameter Rupees Four Hundred Five And Paise One
Salt Spray Test ( IEC 62561-1) - No sign of Corrosion Only
SITC of Stainless steel Conductor Holder for fixing the 8mm/10 mm dia round conductor
on the side wall .
Test Parameter: Rupees Two Hundred Eighty Six And Paise
Salt Spray Test - No Sign of Corrosion Eighty Four Only
Tested as per IEC 62561-1
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
SITC of Conventional Zone Module. The Module shall have UL 864 9th Edition listed,
Provides an address point for a Zone of up to 25 conventional smoke detector , Blinks
green when polled. Latched on red (controlled by panel) when activated, Device address
396 3.00 can be programmed with a handheld programmer, Compatible with Class B and Class A 10605.00 Rupees Ten Thousand Six Hundred Five Only Ea.
wiring, Auxiliary power source provides for the zone detectors. Approved by UL and FM
(Including Five year free maintenance with guarantee)
Supply,Instllation,Testing and Commissioning of Addressable Manual Call Point - Resettable
type - with back box with Binary coded address setting with Status LED for 360° visibility - Rupees Three Thousand Fifty Nine And Paise
IP:50 Rating (Including Five year free maintenance with guarantee) Ninety Six Only
SITC of Analogue addressable loop powered Base Sounder, variable sound output 50 ~
dB(A) (±2 dB(A)) output at 1 metre, 51 user-selectable tones (all tones EN54-3 compatible), Rupees Four Thousand Eight Hundred Forty
398 23.00 Auto shutdown feature prevents noise-pollution, Approved by LPCB & VdS (Including Five 4848.00 Ea.
year free maintenance with guarantee)
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with
annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer Rupees One Hundred Twenty Four And Paise
sheath complete as required. Eleven Only
[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C.
Permanent Magnet Synchronous motor of proper rating with high efficiency shall be
used.[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder feedback
closed loop system shall be used for lift car and door operation which shall be full collective
selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down
Contactor with overload and phase reversal relay and safety controls.[3] Car with M S
platform with bracings of adequate size and to sustain the impact load cabin + passenger Rupees Fourteen Lakh(s) Seventy Four
400 1.00 with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 1474779.78 Thousand Seven Hundred Seventy Nine And Nos
duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car Paise Seventy Eight Only
flooring shall be of s/s 304 chaker plate design suggested of engineer in charge. of engineer
in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening
/ telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop
device, mechanical door safety device, facility of auto/ attended mode. All car panel
buttons and all floor switches must be with brail language as per lift act.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/
telescopic opening made of hairline finish steel grade of 304 with key holes and infrared curtains
with Unlocking facility from outside
[5] Appropriate battery operated emergency light in the car along with alarm switch shall be
provided. Also, Emergency Light & Fan should start immediately without any Time Delay as soon as
[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be
provided inside the car and at all floors.
[7] Full height infra red curtain with multiple cross / crossing light beams shall be provided.
[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity with
Manual Rescue Operation ( Manual Cranking Facility).
[9] Audio visual indication in the lift car showing over loading shall be provided such that doors
kept open till excess load is removed. [10] Spring buffers/PU Buffers shall be provided.
[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.
[12] Voice annunciator with suitable music shall be provided in lift car.
[13] Self diagnostics system for operational and safety parameters shall be provided in control
[14] Mechanical over speed governor with governor calibration as per actual site parameters and
submission of calibration certificate submission, door key holes in the floor doors, fireman switch
shall be provided.
[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit
should be provided by the lift agency, along with the other steel structure works, foundations for
the machine etc…
[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as /
if directed by engineer in charge.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under
Voltage protection and THD eliminator in circuit for lift machine room and lift well with proper
numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency.
Only 3 phase Power Supply shall be made available by department in lift machine room. Necessary
Earthing as per Lift Act/Rules shall be arranged by Lift Agency.
[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related
to erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around
all landing door openings are not in lift agency’s scope.)
[19] Agency has to provide all working drawings and documents and liaison services for obtaining
all necessary permission from lift inspector and other authorities. [20] acrylic transparent
licence/display A4 size holder in lift car [20A] As per statutory requirement of Govt. Of Gujarat lift
& escalator act 2000, lift agency has to provide
1. Car top safety barricade
2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor. 4.carrying out
third party lift inspection during/after lift erection and provide report by third party authorized by
concern licensing authority 5.agency has to provide third party insurance up to completion of
free maintenance period and submit the document for the same. [21] Car Panel Operating Buttons
at an accessible height from wheelchair for handicapped person and raised numbers with brail
mark with floor position indicator/buttons must be of Auto Glow type clearly visible when view
from inside cabin.
[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of
should be provided at appropriate 900mm height on the Rear & Side Wall Panels in Lift Car. [23]
With Necessary kVA rating voltage controlled Stabilizer suitable for your controller, drive and all
equipments of lift.
[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is
sugested by CEICED Department (electrical Inspector)
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category 1. Advanced control
system dual 64 bit embedded microprocessor with CANBUS Serial Communication mode
including Regenerative power efficient operation,on site programming facility, Anti
nuisance, Pte-opening, BMS/RMS with necessary online real time monitoring system
having necessary connectivity for remote monitoring & other suitable supporting
hardware & software devices to fulfil the purpose. 2. Floor Indication LCD Display with call
registration & brail mark with arrival gong and hall lantern & TFT Screen in the car with
MP3 Voice Announcer. 3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair
Line / Honeycomb for car and all Doors, All landing doors must have fire rating up to
hours and car door must have multi-level crisscross beam door protection. 4. To & fro
communication system & wiring (i.e. car , control room & guard room ) and Each elevator
are equipped with remote monitoring system.agency has to provide mobile app and user
id and password for monitoring Supplying, Erecting, Testing & Commissioning the
passenger / stretcher lift having following main features: (R) 8 / 10 Passengers, Ground
plus 2 upper floor with Rated Speed of 1.0 m/sec., (C) With General PLUS ADDITIONAL
SPECIAL FEATURES attached herewith. Prem. Cat.
[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C.
Permanent Magnet Synchronous motor of proper rating with high efficiency shall be
used.[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder feedback
closed loop system shall be used for lift car and door operation which shall be full collective
selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down
Contactor with overload and phase reversal relay and safety controls.[3] Car with M S
platform with bracings of adequate size and to sustain the impact load cabin + passenger Rupees Fifteen Lakh(s) Seventy Five
401 1.00 with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 1575617.17 Thousand Six Hundred Seventeen And Paise Nos
duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car Seventeen Only
flooring shall be of s/s 304 chaker plate design suggested of engineer in charge. of engineer
in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening
/ telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop
device, mechanical door safety device, facility of auto/ attended mode. All car panel
buttons and all floor switches must be with brail language as per lift act.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/
telescopic opening made of hairline finish steel grade of 304 with key holes and infrared curtains
with Unlocking facility from outside
[5] Appropriate battery operated emergency light in the car along with alarm switch shall be
provided. Also, Emergency Light & Fan should start immediately without any Time Delay as soon as
[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be
provided inside the car and at all floors.
[7] Full height infra red curtain with multiple cross / crossing light beams shall be provided.
[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity with
Manual Rescue Operation ( Manual Cranking Facility).
[9] Audio visual indication in the lift car showing over loading shall be provided such that doors
kept open till excess load is removed. [10] Spring buffers/PU Buffers shall be provided.
[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.
[12] Voice annunciator with suitable music shall be provided in lift car.
[13] Self diagnostics system for operational and safety parameters shall be provided in control
[14] Mechanical over speed governor with governor calibration as per actual site parameters and
submission of calibration certificate submission, door key holes in the floor doors, fireman switch
shall be provided.
[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit
should be provided by the lift agency, along with the other steel structure works, foundations for
the machine etc…
[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as /
if directed by engineer in charge.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under
Voltage protection and THD eliminator in circuit for lift machine room and lift well with proper
numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency.
Only 3 phase Power Supply shall be made available by department in lift machine room. Necessary
Earthing as per Lift Act/Rules shall be arranged by Lift Agency.
[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related
to erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around
all landing door openings are not in lift agency’s scope.)
[19] Agency has to provide all working drawings and documents and liaison services for obtaining
all necessary permission from lift inspector and other authorities. [20] acrylic transparent
licence/display A4 size holder in lift car [20A] As per statutory requirement of Govt. Of Gujarat lift
& escalator act 2000, lift agency has to provide
1. Car top safety barricade
2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor. 4.carrying out
third party lift inspection during/after lift erection and provide report by third party authorized by
concern licensing authority 5.agency has to provide third party insurance up to completion of
free maintenance period and submit the document for the same. [21] Car Panel Operating Buttons
at an accessible height from wheelchair for handicapped person and raised numbers with brail
mark with floor position indicator/buttons must be of Auto Glow type clearly visible when view
from inside cabin.
[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of
should be provided at appropriate 900mm height on the Rear & Side Wall Panels in Lift Car. [23]
With Necessary kVA rating voltage controlled Stabilizer suitable for your controller, drive and all
equipments of lift.
[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is
sugested by CEICED Department (electrical Inspector)
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category 1. Advanced control
system dual 64 bit embedded microprocessor with CANBUS Serial Communication mode
including Regenerative power efficient operation,on site programming facility, Anti
nuisance, Pte-opening, BMS/RMS with necessary online real time monitoring system
having necessary connectivity for remote monitoring & other suitable supporting
hardware & software devices to fulfil the purpose. 2. Floor Indication LCD Display with call
registration & brail mark with arrival gong and hall lantern & TFT Screen in the car with
MP3 Voice Announcer. 3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair
Line / Honeycomb for car and all Doors, All landing doors must have fire rating up to
hours and car door must have multi-level crisscross beam door protection. 4. To & fro
communication system & wiring (i.e. car , control room & guard room ) and Each elevator
are equipped with remote monitoring system.agency has to provide mobile app and user
id and password for monitoring Supplying, Erecting, Testing & Commissioning the
passenger / stretcher lift having following main features: (S) 8 / 10 Passengers, Ground
plus 3 upper floor with Rated Speed of 1.0 m/sec., (C) With General PLUS ADDITIONAL
SPECIAL FEATURES attached herewith. Prem. Cat.
[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C.
Permanent Magnet Synchronous motor of proper rating with high efficiency shall be
used.[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder feedback
closed loop system shall be used for lift car and door operation which shall be full collective
selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down
Contactor with overload and phase reversal relay and safety controls.[3] Car with M S
platform with bracings of adequate size and to sustain the impact load cabin + passenger Rupees Twenty Two Lakh(s) Ninety Two
402 2.00 with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 2292963.61 Thousand Nine Hundred Sixty Three And Nos
duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car Paise Sixty One Only
flooring shall be of s/s 304 chaker plate design suggested of engineer in charge. of engineer
in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening
/ telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop
device, mechanical door safety device, facility of auto/ attended mode. All car panel
buttons and all floor switches must be with brail language as per lift act.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/
telescopic opening made of hairline finish steel grade of 304 with key holes and infrared curtains
with Unlocking facility from outside
[5] Appropriate battery operated emergency light in the car along with alarm switch shall be
provided. Also, Emergency Light & Fan should start immediately without any Time Delay as soon as
[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be
provided inside the car and at all floors.
[7] Full height infra red curtain with multiple cross / crossing light beams shall be provided.
[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity with
Manual Rescue Operation ( Manual Cranking Facility).
[9] Audio visual indication in the lift car showing over loading shall be provided such that doors
kept open till excess load is removed. [10] Spring buffers/PU Buffers shall be provided.
[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.
[12] Voice annunciator with suitable music shall be provided in lift car.
[13] Self diagnostics system for operational and safety parameters shall be provided in control
[14] Mechanical over speed governor with governor calibration as per actual site parameters and
submission of calibration certificate submission, door key holes in the floor doors, fireman switch
shall be provided.
[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit
should be provided by the lift agency, along with the other steel structure works, foundations for
the machine etc…
[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as /
if directed by engineer in charge.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under
Voltage protection and THD eliminator in circuit for lift machine room and lift well with proper
numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency.
Only 3 phase Power Supply shall be made available by department in lift machine room. Necessary
Earthing as per Lift Act/Rules shall be arranged by Lift Agency.
[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related
to erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around
all landing door openings are not in lift agency’s scope.)
[19] Agency has to provide all working drawings and documents and liaison services for obtaining
all necessary permission from lift inspector and other authorities. [20] acrylic transparent
licence/display A4 size holder in lift car [20A] As per statutory requirement of Govt. Of Gujarat lift
& escalator act 2000, lift agency has to provide
1. Car top safety barricade
2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor. 4.carrying out
third party lift inspection during/after lift erection and provide report by third party authorized by
concern licensing authority 5.agency has to provide third party insurance up to completion of
free maintenance period and submit the document for the same. [21] Car Panel Operating Buttons
at an accessible height from wheelchair for handicapped person and raised numbers with brail
mark with floor position indicator/buttons must be of Auto Glow type clearly visible when view
from inside cabin.
[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of
should be provided at appropriate 900mm height on the Rear & Side Wall Panels in Lift Car. [23]
With Necessary kVA rating voltage controlled Stabilizer suitable for your controller, drive and all
equipments of lift.
[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is
sugested by CEICED Department (electrical Inspector)
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category 1. Advanced control
system dual 64 bit embedded microprocessor with CANBUS Serial Communication mode
including Regenerative power efficient operation,on site programming facility, Anti
nuisance, Pte-opening, BMS/RMS with necessary online real time monitoring system
having necessary connectivity for remote monitoring & other suitable supporting
hardware & software devices to fulfil the purpose. 2. Floor Indication LCD Display with call
registration & brail mark with arrival gong and hall lantern & TFT Screen in the car with
MP3 Voice Announcer. 3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair
Line / Honeycomb for car and all Doors, All landing doors must have fire rating up to
hours and car door must have multi-level crisscross beam door protection. 4. To & fro
communication system & wiring (i.e. car , control room & guard room ) and Each elevator
are equipped with remote monitoring system.agency has to provide mobile app and user
id and password for monitoring Supplying, Erecting, Testing & Commissioning the
passenger / stretcher lift having following main features: (Z) 8 / 10 Passengers, Ground
plus 8 upper floor with Rated Speed of 1.5 / 1.75 / 2.0 m/sec., (C) With General PLUS
ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.
FIRE FIGHTING PUMPS:- Supply, installation, testing & commissioning of electric driven
Hydrant & Sprinkler Pump suitable for automatic operation consisting of the
following:Horizontal end suction centrifugal pump complete with mechanical seal and
including necessary arrangement for testing of pump Squirrel cage induction motor
suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with
synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling
and coupling guard with the pump. Common bed plate of fabricated mild steel channel or
cast iron type. Suitable reinforced cement concrete pump foundation including cushy foot Rupees Two Lakh(s) Ninety Nine Thousand
403 1.00 mounting, foundation bolts, washers as required. Suitable reinforced cement concrete 299080.69 Set
Eighty And Paise Sixty Nine Only
pump foundation including cushy foot mounting, foundation bolts, washers as required.
The pump shall be of the following specifications:Discharge-2280 lpm,Head - 56 mtr No. of
stage preferred - Single / Double Speed RPM - 2900 Material of construction a)
Impeller - Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease
Lubicated e) Seal & Make - Mechanical Type of pump - End suction HP :-
45HP ( 35 KW.) ( Make :- KBL / M & P / GROUNDFOS / KSB.)
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Supply, installation, testing & commissioning of electric driven Jockey Pump suitable for
automatic operation consisting of the following: Horizontally mounted centrifugal end
suction pump complete with mechanical seal and including necessary arrangement for
testing of pump.Squirrel cage induction motor suitable for 4440 V, 50 Hz, AC supply of
suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and
conforming to IP:55 and flexible coupling and coupling guard with the pump.Common bed
plate of fabricated mild steel channel or cast iron type.Suitable reinforced cement concrete
Rupees Seventy Four Thousand Five Hundred
404 1.00 pump foundation including cushy foot mounting, foundation bolts, washers as 74555.97 Set
Fifty Five And Paise Ninety Seven Only
required.The pump shall be of the following specifications:Discharge - 180 lpm Head - 56 m
No. of stage preferred - Multistage Speed RPM - 2900 Mover - Electric
Motor Driven Material of construction a) Impeller - Bronze b) Casing - C.I. c)
Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated e) Seal & Make - Mechanical
Type of pump - End suction HP:- 4.0 HP ( 3 KW.) ( Make :- KBL / M & P / GROUNDFOS /
Supply, installation, testing & commissioning of diesel engine Hydrant Pump suitable for
automatic operation consisting of the following: Horizontal split casing centrifugal pump
complete with mechanical seal and including necessary arrangement for testing of pump
Water cooled Diesel Engine developing suitable BHP at 1500 RPM for the Pump, common
bed plate for mounting of engine and pump, RCC foundation and vibration damping
arrangement by Cushy Foot and engine panel provided by engine manufacturer,
connection to Engine Starting Panel as per item (4), sealed maintenance free batteries of
24 V, 88 AH. Rate shall include Exhaust pipe of required length with asbestos lagging,
muffler, day oil tank of 400 lts with first charge and manual oil pump set.Flexible coupling
and coupling guard with the Pump,Common bed plate of fabricated mild steel channel or Rupees Five Lakh(s) Forty Seven Thousand
405 1.00 cast iron type.Suitable reinforced cement concrete pump foundation including cushy foot 547234.26 Two Hundred Thirty Four And Paise Twenty Set
mounting, foundation bolts, washers as required. Engine panel Sealed maintenance free Six Only
batteries of 24 V, 88 AH --2 Nos. (1 working + 1 standby)Exhaust pipe of required length
with asbestos lagging, muffler Day oil tank G.I.-pipe Metal) of 400 lts with first charge
and manual oil pump set and necessary piping and structural work to place tank at upper
level from pump in pump room,Discharge -2280 lpm, Head - 56 m No. of stage preferred -
Single / Double Speed RPM - 1450 Mover - Diesel engine driven Material of construction a)
Impeller - Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease
Lubicated e) Seal & Make - Mechanical Type of pump - END SUCTION ( Make :- KBL / M &
P / GROUNDFOS / KSB.)
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Supply, installation, testing & commissioning of electric driven automatic fire booster
Pump suitable for automatic operation consisting of the following: Horizontal end suction
centrifugal pump complete with mechanical seal and including necessary arrangement for
testing of pump. Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of
suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and
conforming to IP:55 and flexible coupling and coupling guard with the pump. Common bed
plate of fabricated mild steel channel or cast iron type. Suitable reinforced cement Rupees Seventy Eight Thousand Two
concrete pump foundation including cushy foot mounting, foundation bolts, washers as Hundred Eighteen And Paise Fifty One Only
required. The pump shall be of the following specifications: Discharge-450 lpm, Head -
m No. of stage preferred - Single / Double Speed RPM - 2900 Material of construction a)
Impeller - Bronze b) Casing- C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease
Lubicated e) Seal & Make - Mechanical ,Type of pump - End suction f) H.P.- 7 HP ( 5 KW.) (
Make :- KBL / M & P / GROUNDFOS / KSB.)
Providing and fixing air vessel for fire pumps as per following specifications: Diameter -
250mm, Shell thickness - 8mm, Dish ends - 10mm, Height - 1200mm Finishing - Two
coats of Red enamel paint of first grade over one coat of primer externally & two coats of Rupees Sixteen Thousand Six Hundred Six
407 3.00 epoxy coating inside Material of Construction - M.S. Test Pressure - 15 Kg./sq.cm., drain 16606.80 Each
And Paise Eighty Only
arrangmenet with 25mm dia. dia gun metal wheel valve with required accessories etc.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Fire Fighting Panel :- Fabrication, supply, Insallation testing & commissioning of Electrical
control panel of cubical construction, floor mounted type, fabricated out of 2mm thick
CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof,
powder coated of approved shade after 7 tank treatment process, cable alley,
interconnection with suitable size copper conductor cable/solid copper strip, having
switchgears and accessories, mountings and internal wiring, earth terminals, numbering
etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel
pump set complete as per CPWD specification with following in coming and Outgoings,
suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP Rupees Two Lakh(s) Nineteen Thousand
408 1.00 42 as required : Including feeders earthing and paint shade as per Fire norms and as per 219788.84 Seven Hundred Eighty Eight And Paise Eighty Set
specifications.out going motor feeders to have start/stop on / off /trip indication and Four Only
current in all the phases. All out going terminals brought to cable alleys. This panel should
be painted in Red shade as per local Fire Officer's norms, if any. INCOMING
250A, 50kA 4 Pole MCCB, Ics=100% Icu rating
Digital Voltmeter 0-500V with selector switch
Digital Ammeter (0-250 A) with selector swtich & CTs etc.LED type RYB phase indicating
lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 300A( Make:- L & T, Siemens, Schinder, ABB)
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for
60 HP pump with overload protection, current sensing type single phase preventor
complete with all acceessories and internal wiring required for automatic operation,
selector switch for local/remote, auto/manual/OFF operation.
63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter
with overload protection, current sensing type single phase preventor complete with all
acceessories and internal wiring required for automatic operation, selector switch for
local/remote, auto/manual/OFF operation.
DIESEL ENGINE CONTROL
Control for diesel engine comprising -
0.00 Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as 0.00 Rupees Nil -
required, push buttons, start/stop in manual mode
Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication
Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC
volt meter, and 0- 20 A DC Ammeter
All standard relays and accessories for automatic operation of diesel engine
System Controller
Designing, Supply, Installation, Testing and commissioning of system controller to control
operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in
sequence as per specification consisting of relays, timers. Sensors, annunciation window
for fault indication, complete as per specification ( Make:- L & T, Siemens, Schinder, ABB)
Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V.
Rupees Three Hundred Eighty Nine And Paise
409 25.00 Aluminium Conductor 3 core x 70 sq.mm ) 389.86 Metre
Eighty Six Only
Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V.
Aluminium Conductor 3 core x 10 sq.mm (cable from pump room to terrace for booster Rupees One Hundred Fifty Four And Paise
pump) Fifty Three Only
Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V.
Rupees Two Hundred Eight And Paise Six
411 15.00 Aluminium Conductor 3 core x 16 sq.mm (cable for jockey pump) 208.06 Metre
Providing and fixing in position cable end termination glands for above mentioned cables
Rupees Five Hundred Forty Five And Paise
412 3.00 core x 70 sq.mm 545.40 Nos.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing in position cable end termination glands for above mentioned cables
Rupees Two Hundred Eighty Five And Paise
413 3.00 core x 10 sq.mm (cable from Booster Pump to terrace Remort Panel ) 285.83 Nos.
Eighty Three Only
Providing and fixing in position cable end termination glands for above mentioned cables
Rupees Two Hundred Eight And Paise Six
414 2.00 core x 16 sq.mm (cable for jockey pump) 208.06 Nos.
Providing, installation, testing, & commissioning of Remote Panel for fire fighting terrace
pump with push buttons for manual operation (the remote panel shall be located at Rupees Twenty Five Thousand Nine Hundred
ground level) all complete.( Sixty Nine And Paise Twelve Only
Supplying, laying and connecting of following size 1.1 kV grade copper conductor armoured
control cable on wall or on existing cable tray with clamping, dressing or drawn in existing Rupees Eighty Seven And Paise Eighty Seven
416 25.00 ducts all as required (For remote panel for fire fighting terrace pump). 3 core x 6 sq.mm 87.87 Metre
Providing, installation, testing, & commissioning of pressure switches for Hydrant,
Sprinkler, Standby and Jockey pump including necessary wiring upto control panel & other Rupees One Thousand Four Hundred Twenty
materials.. Nine And Paise Forty One Only
Providing and fixing fire retardent / extinguishing electrical insulated synthetic mat of 5mm
thick ±10% conforming to latest BIS doc no.-ET-02(5440) meeting requirements of IS 3043 /
IS 5216 (Part I, II & III), IS 8437 & IEC 479 suitable for all voltages not exceeding 3.3 KV AC Rupees One Thousand Seven Hundred Sixty
418 5.00 supply and having minimum width of 1000mm ± 20mm and including supply of required 1765.48 Metre
Five And Paise Forty Eight Only
quantity of adhsive / compound and fixing the same at site as per site requirement
Fabricating and installing following size of perforated G.I.-pipe cable trays including
horizontal and vertical bends, reducers, tees, cross members and other accessories as
Rupees Three Hundred Sixty Three And Paise
419 25.00 required and duly suspended from the ceiling with M.S. suspenders including painting, etc., 363.60 Metre
as required. 150mm width x 50mm depth x 1.6 mm thickness.
Providing & fixing 25 mm x 5 mm G.I.-pipe Strip in on surface or in recess for connections
Rupees One Hundred Twenty Four And Paise
420 25.00 etc as required. 124.23 Metre
Twenty Three Only
Providing & fixing 25 mm x 5 mm G.I.-pipe Strip in 40 mm dia GI pipe from earth
421 15.00 electrode as required 51.51 Rupees Fifty One And Paise Fifty One Only Metre
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
SUCTION AND DELIVERY PIPES AND VALVES FOR FIRE FIGHTING PUMPS:- Providing and
fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire fighting
pumps (IS. 1239 heavy duty) including all fittings like couplings, bends, elbows, offsets,
blind flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all
type) joints as per detailed specfications as required, cutting holes and chases in brick or Rupees Two Hundred Ninety Two And Paise
RCC walls or floors and making good complete alongwith painting G.I.-pipe pipe with Ninety Only
coat of Red Oxide primer and two or more coats of synthetic enamel paint of approved
colour and quality to give an even shade including surface preparation. 15 mm nominal
Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes
for fire fighting pumps (IS. 1239 heavy duty) including all fittings like couplings, bends,
elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or
welded (all type) joints as per detailed specfications as required, cutting holes and chases
Rupees Six Hundred Eight And Paise Fifty
423 25.00 in brick or RCC walls or floors and making good complete alongwith painting G.I.-pipe 608.57 Metre
pipe with coat of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface preparation. 25 mm
Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes
for fire fighting pumps (IS. 1239 heavy duty) including all fittings like couplings, bends,
elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or
welded (all type) joints as per detailed specfications as required, cutting holes and chases
Rupees One Thousand Two Hundred Ninety
424 35.00 in brick or RCC walls or floors and making good complete alongwith painting G.I.-pipe 1295.88 Metre
Five And Paise Eighty Eight Only
pipe with coat of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface preparation. 80 mm
Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes
for fire fighting pumps (IS. 1239 heavy duty) including all fittings like couplings, bends,
elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or
welded (all type) joints as per detailed specfications as required, cutting holes and chases
Rupees One Thousand Six Hundred Forty
425 35.00 in brick or RCC walls or floors and making good complete alongwith painting G.I.-pipe 1647.67 Metre
Seven And Paise Sixty Seven Only
pipe with coat of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface preparation. 100 mm
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes
for fire fighting pumps (IS. 1239 heavy duty) including all fittings like couplings, bends,
elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or
welded (all type) joints as per detailed specfications as required, cutting holes and chases
Rupees Two Thousand Two Hundred Fifty
426 35.00 in brick or RCC walls or floors and making good complete alongwith painting G.I.-pipe 2253.67 Metre
Three And Paise Sixty Seven Only
pipe with coat of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface preparation. 150 mm
Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes
for fire fighting pumps (IS. 1239 heavy duty) including all fittings like couplings, bends,
elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or
welded (all type) joints as per detailed specfications as required, cutting holes and chases
Rupees Five Thousand Six Hundred Sixty Six
427 1.00 in brick or RCC walls or floors and making good complete alongwith painting G.I.-pipe 5666.27 Metre
And Paise Twenty Seven Only
pipe with coat of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface preparation. 200 mm
nominal bore (6.0 thick min.)
Providing and fixing cast iron wafer type Butterfly valve of the following size complete with
bolts, nuts, washers and neoprene gaskets as per specifications. 80 mm nominal bore Rupees Four Thousand Six Hundred Twenty
Seven And Paise Seventeen Only
Providing and fixing cast iron wafer type Butterfly valve of the following size complete with
bolts, nuts, washers and neoprene gaskets as per specifications. 100 mm nominal bore Rupees Six Thousand Two Hundred Twenty
Three And Paise Forty Eight Only
Providing and fixing cast iron wafer type Butterfly valve of the following size complete with
bolts, nuts, washers and neoprene gaskets as per specifications. 150 mm nominal bore Rupees Eight Thousand Three Hundred Thirty
Four And Paise Twenty One Only
Providing and fixing cast iron wafer type Butterfly valve of the following size complete with
bolts, nuts, washers and neoprene gaskets as per specifications. 200 mm nominal bore Rupees Thirteen Thousand Nine Hundred
Seven And Paise Nineteen Only
Providing, installation, testing and commissioning of non-return valve of following sizes
confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : Rupees Ten Thousand One Hundred Forty
100 mm nominal bore Five And Paise Thirty Six Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing, installation, testing and commissioning of non-return valve of following sizes
confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : Rupees Seven Thousand Sixty Five And Paise
80 mm nominal bore Seventy Two Only
Providing, installation, testing and commissioning of non-return valve of following sizes
confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : Rupees Sixteen Thousand One Hundred Sixty
150 mm nominal bore Three And Paise Forty Two Only
Providing, installation, testing and commissioning of non-return valve of following sizes
confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : Rupees Twenty Six Thousand Four Hundred
200 mm nominal bore Forty Four And Paise Eighty Eight Only
Providing and fixing reinforced Neoprene flexible pipe connectors with all accessories on all Rupees Four Thousand Six Hundred Ninety
436 1.00 pumps delivery.Suitable for 20 Kg/cm2 80mm ( 4692.46 Each
Two And Paise Forty Six Only
Providing and fixing reinforced Neoprene flexible pipe connectors with all accessories on all Rupees Six Thousand Four Hundred Fifty One
437 2.00 pumps delivery.Suitable for 20 Kg/cm2 150mm 6451.88 Each
And Paise Eighty Eight Only
Providing and fixing of nickel plated brass / nonferrous alloy fullyway ball valve (minimum
working pressure of 20 bar ) with operating handle of approved make. 25 mm nominal Rupees One Thousand One Hundred Seventy
438 2.00 bore (Make:- Audco, Kartaar, Zoloto) 1173.62 NO.
Three And Paise Sixty Two Only
Providing and fixing of nickel plated brass / nonferrous alloy fullyway ball valve (minimum
working pressure of 20 bar ) with operating handle of approved make.15 mm nominal bore Rupees Six Hundred Forty Five And Paise
Thirty Nine Only
FIRE HYDRANT SYSTEM(External & Internal) (All Fire Fighting Hardware Should be ISI Mark)
:-Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. Pipe
conforming to IS 3589/IS 1239 for pipes upto 150 mm dia. including forged
threaded/socked(weldable) i.e. tees, bends, elbows, unions, reducers, draining
arrangement, flange joints, rubber insertion, nuts & bolts etc. as required including fixing
of pipework on walls, slabs etc. with M. S. supports (duly painted), adjustible hangers. Rupees Six Hundred Eight And Paise Fifty
Note: Joints for pipes and fitttings upto 50 mm diameter shall be threaded joints using Seven Only
Teflon Tape or equivalent bonding tape on the threads. Joints for pipe and fittings above
mm diameter shall be welded joints.Above ground pipe-with a coat of red oxide primer and
two or more coats of synthetic enamel paint of approved colour and Quality to give an
even shade including surface preparation. :- 25 mm dia
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. Pipe
conforming to IS 3589/IS 1239 for pipes upto 150 mm dia. including forged
threaded/socked(weldable) i.e. tees, bends, elbows, unions, reducers, draining
arrangement, flange joints, rubber insertion, nuts & bolts etc. as required including fixing
of pipework on walls, slabs etc. with M. S. supports (duly painted), adjustible hangers.
Rupees One Thousand Two Hundred Ninety
441 100.00 Note: Joints for pipes and fitttings upto 50 mm diameter shall be threaded joints using 1295.88 Meter
Five And Paise Eighty Eight Only
Teflon Tape or equivalent bonding tape on the threads. Joints for pipe and fittings above
mm diameter shall be welded joints.Above ground pipe -with a coat of red oxide primer
and two or more coats of synthetic enamel paint of approved colour and Quality to give
an even shade including surface preparation.:- 80 mm dia
Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. Pipe
conforming to IS 3589/IS 1239 for pipes upto 150 mm dia. including forged
threaded/socked(weldable) i.e. tees, bends, elbows, unions, reducers, draining
arrangement, flange joints, rubber insertion, nuts & bolts etc. as required including fixing
of pipework on walls, slabs etc. with M. S. supports (duly painted), adjustible hangers.
Rupees One Thousand Seven Hundred Sixty
442 175.00 Note: Joints for pipes and fitttings upto 50 mm diameter shall be threaded joints using 1767.50 Meter
Seven And Paise Fifty Only
Teflon Tape or equivalent bonding tape on the threads. Joints for pipe and fittings above
mm diameter shall be welded joints.Above ground pipe -with a coat of red oxide primer
and two or more coats of synthetic enamel paint of approved colour and Quality to give
an even shade including surface preparation.:- 100 mm dia
Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. Pipe
conforming to IS 3589/IS 1239 for pipes upto 150 mm dia. including forged
threaded/socked(weldable) i.e. tees, bends, elbows, unions, reducers, draining
arrangement, flange joints, rubber insertion, nuts & bolts etc. as required including fixing
of pipework on walls, slabs etc. with M. S. supports (duly painted), adjustible hangers.
Note: Joints for pipes and fitttings upto 50 mm diameter shall be threaded joints using Rupees Two Thousand Two Hundred Fifty
Teflon Tape or equivalent bonding tape on the threads. Joints for pipe and fittings above 50 Three And Paise Sixty Seven Only
mm diameter shall be welded joints.Above ground pipe-with a coat of red oxide primer and
two or more coats of synthetic enamel paint of approved colour and Quality to give an
even shade including surface preparation. :- 150 mm dia (Make:- TATA/ JINDAL)
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS
including all GI/MS fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees,
flanges (flanges as per table E), etc. threaded or welded (all type ) joints as per detailed
specfications as required, cutting holes and chases in brick or RCC walls or floors and
making good complete with one coat of 4 mm thick 'PYPKOTE' or COATEK anti rust pipe
protection including approved primer & surface preparation of pipes as per manufacturers Rupees One Thousand Two Hundred Ninety
specifications and lap of 25 mm to make an impermeable layer on G.I. Pipes in trenches or Five And Paise Eighty Eight Only
underground pipes below soil all complete.Under ground pipe-with a coat of red oxide
primer and two or more coats of synthetic enamel paint of approved colour and Quality to
give an even shade including surface preparation. 80 mm dia(UNDERGROUND)
Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS
including all GI/MS fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees,
flanges (flanges as per table E), etc. threaded or welded (all type ) joints as per detailed
specfications as required, cutting holes and chases in brick or RCC walls or floors and
making good complete with one coat of 4 mm thick 'PYPKOTE' or COATEK anti rust pipe
protection including approved primer & surface preparation of pipes as per manufacturers Rupees One Thousand Six Hundred Forty
specifications and lap of 25 mm to make an impermeable layer on G.I. Pipes in trenches or Seven And Paise Sixty Seven Only
underground pipes below soil all complete.Under ground pipe-with a coat of red oxide
primer and two or more coats of synthetic enamel paint of approved colour and Quality to
give an even shade including surface preparation. 100 mm dia(UNDERGROUND)
Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS
including all GI/MS fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees,
flanges (flanges as per table E), etc. threaded or welded (all type ) joints as per detailed
specfications as required, cutting holes and chases in brick or RCC walls or floors and
making good complete with one coat of 4 mm thick 'PYPKOTE' or COATEK anti rust pipe
protection including approved primer & surface preparation of pipes as per manufacturers Rupees Two Thousand Two Hundred Fifty
specifications and lap of 25 mm to make an impermeable layer on G.I. Pipes in trenches or Three And Paise Sixty Seven Only
underground pipes below soil all complete.Under ground pipe :- 150 mm
dia(UNDERGROUND)with a coat of red oxide primer and two or more coats of synthetic
enamel paint of approved colour and Quality to give an even shade including surface
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing S.S landing valve conforming to IS -5290 with 63 mm dia
instantaneous female coupling on the outlet with S.S. orifice flange 6 mm thick as
required to maintain 3.5 Kg/sq.cm., blank cap and chain, necessary companion flanges ( Rupees Five Thousand Six Hundred Seventy
as per table "E") nuts, bolts, washer and gasket complete as per specification. (ISI marked) Six And Paise Fifty Four Only
Single outlet (
Providing and fixing first aid fire hose reel drum wall mounting, swinging type fitted
with 20 mm dia 30.0 m long high pressure hose to I.S. 5132 with 25 mm outlet
448 14.00 gunmetal nozzle with shut off valve (I.S. 884-1969). Name of Manufacturer should be 8080.00 Rupees Eight Thousand Eighty Only Each
embossed on the drum.
Providing and fixing 63 mm dia 15m long EPDM lined fabric lined hose including SS male
and female instantaneous type coupling approved by fire authority, machine wound with
Rupees Three Thousand Nine Hundred
449 14.00 copper wire complete in all respects.Hose shall conform to IS 636 TypeII and coupling to IS 3994.64 Each
Ninety Four And Paise Sixty Four Only
903 -1975 (ISI marked)
Providing and fixing standard short size SS branch pipe with gunmetal nozzle 20 mm dia
Rupees Two Thousand Nine Hundred Eleven
450 14.00 outlet with standard instantaneoustype 63 mm dia coupling. (conform to IS-903). 2911.88 Each
And Paise Eighty Eight Only
Providing and fixing standard fireman's axe ( tested for 20000 Volts) with heavy insulated Rupees One Thousand One Hundred
451 14.00 rubber handle.( ISI marked)( 1114.03 Each
Fourteen And Paise Three Only
Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia. . Rupees Two Thousand Four Hundred Sixty
Three And Paise Thirty Nine Only
Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed
female ends tested to 20 Kg/ cm2 of approved quality as specified.20mm . Rupees One Thousand One Hundred
Fourteen And Paise Three Only
Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed
female ends tested to 20 Kg/ cm2 of approved quality as specified. 25 mm dia . Rupees One Thousand Four Hundred Sixty
Six And Paise Fifty Two Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing door with frame for all internal fire hydrants fabricated from 16 SWG
Alumunim of size 750 x 1200 x2100 mm double door including 2 nos allen key lock for
locking along with padlock arrangement & fully glazed with 4 mm thick float glass
approved by local Fire Authority, stove enameled fire red finish with " fire hose' written on
front suitable to house 15 mm long four length of canvas hose with couplings,one no of Rupees Thirteen Thousand Four Hundred
branch pipe, one fire mans axe and two numbers of portable extinguishers, first aid fire Ninety And Paise Fifty Seven Only
hose and supports for hoses, branch pipes, Axe and hose reel. as per approved design
including necessary fixing arrangement for hoses & axe and branch pipe.) FOR INTERNAL.
Providing and fixing dial type pressure gauge with isolation cock and chrome coated copper
Rupees One Thousand One Hundred Seventy
456 14.00 pipe at hydrant station. Dial diameter 100 mm calebration 0-15 kg/ sq.cm.. 1173.62 Each
Three And Paise Sixty Two Only
Providing and fixing cast iron wafer type Butterfly valve -PN-1.6-of the following size
complete with bolts, nuts, washers and neoprene gaskets as per specifications. 80 mm dia Rupees Four Thousand Six Hundred Twenty
Seven And Paise Seventeen Only
Providing and fixing cast iron wafer type Butterfly valve-pn-1.6- of the following size
complete with bolts, nuts, washers and neoprene gaskets as per specifications. 150 mm dia Rupees Eight Thousand Three Hundred Thirty
Four And Paise Twenty One Only
Providing and fixing cast iron dual plate wafer type non return valves. 150 mm dia Rupees Sixteen Thousand One Hundred Sixty
Three And Paise Forty Two Only
Providing and fixing gunmetal fire brigade inlet head as per IS:904 Specification tested
for 20 Kg/cm2 with 63 mm dia instantaneous type inlet and 150mm dia. flanged outlet
with built-in check valve for fire brigade connection to under ground tanks and fire risers Rupees Six Thousand Two Hundred Fifteen
including campanion flanges as pertable " E" including nuts, bolts & washers etc. Four way And Paise Seventy Eight Only
Providing and fixing gunmetal fire brigade inlet head as per IS:904 Specification tested
for 20 Kg/cm2 with 63 mm dia instantaneous type inlet and 150mm dia. flanged outlet
with built-in check valve for fire brigade connection to under ground tanks and fire risers Rupees Twelve Thousand Six Hundred Eighty
including campanion flanges as pertable " E" including nuts, bolts & washers etc. Two way ( Four And Paise Ninety Two Only
Providing and fixing suction coupling for fire brigade drawl of water from tank with
mm dia GI (Medium) pipe and foot valve . ) Rupees Twenty Six Thousand Three Hundred
Ninety Five And Paise Thirty Four Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing, fixing ,testing and commissioning external (yard) hydrant "STAND-POST" type
conforming to IS:908-1975 and comprising of stand post for single outlet of hot diped class
' C' G.I.-pipe Pipe of 100 mm dia at the with instantaneous spring lock type Stainless steel
female coupling of 63 mm dia for connecting to hose pipe, single headed SS valves Rupees Five Thousand Six Hundred Seventy
conforming to type A of IS: 5290-1977, GI tee tapping from underground mains, flange riser Six And Paise Fifty Four Only
and any other accessories etc. as per specification complete as required. (
Providing and fixing fire hose cabinet fabricated from 16 gauge M.S.sheet with locking
arrangement and hanging arrangement for accessories painted "Fire Red" with Stove
enameled paint "Fire Hose" written on front including suitable supports to place 900 mm
Rupees Five Thousand Sixty Four And Paise
464 14.00 above ground level properly anchored, approximately size 800 X 600 X 250 mm deep (to 5064.14 Each
house two lengths of canvas hose with couplings, branch pipe with nozzle for external
hydrants) FOR EXTERNAL.
SPRINKLER SYSTEM :- Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS
3589/IS 1239 complete with GI / MS fittings like couplings, bends, elbows, tees,
offsets,reducers, flanges as per table 'E' etc. including cutting and making good the walls
complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia and above should Rupees Six Hundred Eight And Paise Fifty
be welded joint (all type).with one coat of red oxide primer and two or more coats of Seven Only
synthetic enamel paint of approved colour to give an even shade including surface
preparations. :- 25 mm dia
Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS
complete with GI / MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges
as per table 'E' etc. including cutting and making good the walls complete.Pipes upto
mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all Rupees Six Hundred Seventy One And Paise
type).with one coat of red oxide primer and two or more coats of synthetic enamel paint of Ninety One Only
approved colour to give an even shade including surface preparations. :-32 mm dia
Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS
complete with GI / MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges
as per table 'E' etc. including cutting and making good the walls complete.Pipes upto
mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all Rupees Eight Hundred Twenty Six And Paise
type).with one coat of red oxide primer and two or more coats of synthetic enamel paint of Eighty Three Only
approved colour to give an even shade including surface preparations. :-40 mm dia
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS
complete with GI / MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges
as per table 'E' etc. including cutting and making good the walls complete.Pipes upto
mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all Rupees Nine Hundred Twelve And Paise
type).with one coat of red oxide primer and two or more coats of synthetic enamel paint of Forty Two Only
approved colour to give an even shade including surface preparations. :-50 mm dia
Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS
complete with GI / MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges
as per table 'E' etc. including cutting and making good the walls complete.Pipes upto
mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all Rupees One Thousand One Hundred Thirty
type).with one coat of red oxide primer and two or more coats of synthetic enamel paint of Eight And Paise Thirty Nine Only
approved colour to give an even shade including surface preparations. :-65 mm dia
Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS
complete with GI / MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges
as per table 'E' etc. including cutting and making good the walls complete.Pipes upto
mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all Rupees One Thousand Two Hundred Ninety
type).with one coat of red oxide primer and two or more coats of synthetic enamel paint of Five And Paise Eighty Eight Only
approved colour to give an even shade including surface preparations. :-80 mm dia
Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS
complete with GI / MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges
as per table 'E' etc. including cutting and making good the walls complete.Pipes upto
mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all Rupees One Thousand Six Hundred Forty
type).with one coat of red oxide primer and two or more coats of synthetic enamel paint of Seven And Paise Sixty Seven Only
approved colour to give an even shade including surface preparations. :-100 mm dia
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS
complete with GI / MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges
as per table 'E' etc. including cutting and making good the walls complete.Pipes upto
mm dia threaded joint with holdtite, 65 mm dia and above should be welded joint (all Rupees Two Thousand Two Hundred Fifty
type).with one coat of red oxide primer and two or more coats of synthetic enamel paint of Three And Paise Sixty Seven Only
approved colour to give an even shade including surface preparations. :-150 mm dia
Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set to operate
at specified temperature pendent/ upright/ side wall as per instruction and fixing with Rupees Five Hundred Twelve And Paise
loctite. Pendent Type 68 C Seventy Only
Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set to operate
at specified temperature pendent/ upright/ side wall as per instruction and fixing with Rupees Five Hundred Ninety Eight And Paise
loctite. Side Wall Type 68 C Thirty Only
Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set to operate
at specified temperature pendent/ upright/ side wall as per instruction and fixing with Rupees Five Hundred Twelve And Paise
loctite. Upright Type 68 C Seventy Only
Rossete Plate:-Providing, installation, testing & commissioning of
adjustable rosette plate for 15mm dia in white finish UL Rupees Two Hundred Twenty Five And Paise
Listed or FM approved complete as required. Ninety Seven Only
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of
stainless steel complete with 15 NPT on reducer thread with maximum working pressure of
175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to Rupees One Thousand Five Hundred Forty
sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, And Paise Sixty Eight Only
center bracket, stockbar of following sizes complete as required.1200mm
Providing & fixing 25mm dia gunmetal inspecting & testing assembly with ball valve(3 Rupees Three Thousand Six Hundred Thirty
478 1.00 nos.), gunmetal sight glass, by pass valve & connected to drain line. ( 3636.00 Each
Providing and fixing brass ball valve full bore type with plastic coated lever approved Rupees Four Thousand One Hundred Five
479 2.00 quality, tested to 20 Kg.cm.sq. 40 mm dia 4105.65 Each
And Paise Sixty Five Only
Providing and fixing brass ball valve full bore type with plastic coated lever approved Rupees Four Thousand Four Hundred Fifty
480 2.00 quality, tested to 20 Kg.cm.sq. 50 mm dia ( 4458.14 Each
Eight And Paise Fourteen Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Providing and fixing cast iron wafer type Butterfly valve-PN-1.6- of the following size
complete with bolts, nuts, washers and neoprene gaskets as per specifications. :- 100 mm Rupees Six Thousand Two Hundred Twenty
nominal bore ( Three And Paise Forty Eight Only
Providing and fixing cast iron wafer type Butterfly valve -PN-1.6-of the following size
complete with bolts, nuts, washers and neoprene gaskets as per specifications. :- 65 mm Rupees Four Thousand Thirty Three And
nominal bore ( Paise Fifteen Only
Providing and fixing electricaly operated flow indicating switches model System Sensor
in sprinkler branch line on each floor with necessary junction box installed in accessible Rupees Six Thousand Nine Hundred Six And
483 1.00 place (Wiring from switches to panel and stair case pressurisation not included) :- 100 mm 6906.52 Each
Paise Fifty Two Only
Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main
Rupees One Thousand One Hundred Seventy
484 2.00 header Dial diameter 100 mm celebration 0-15 / sq. cm. 1173.62 Each
Three And Paise Sixty Two Only
Providing and fixing 25 mm dia single acting air release valve with screwed inlet..
Rupees Two Thousand Four Hundred Sixty
Three And Paise Thirty Nine Only
Providing and fixing cast iron dual plate wafer type non return valves. :- 150 mm dia .
Rupees Sixteen Thousand One Hundred Sixty
Three And Paise Forty Two Only
Providing and fixing cast iron dual plate wafer type non return valves.:- 100 mm dia .
Rupees Ten Thousand One Hundred Forty
Five And Paise Thirty Six Only
Providing, Installation, testing and commissioning of Control Valve inclusive of: - 150 mm
dia butterfly Valve,Alarm Valve with Water Motor Gong, Pressure gauge and other Rupees Forty Three Thousand Four Hundred
miscellaneous Valves and fittings as required. Eighty Five And Paise Sixty Four Only
Fire Resistant Door Double Leaf Hinge Type (2 Hour Fire Rated) 1.00 mm thick GI Sheet
cladded 40mm thick shutter complete with GI frame (Single Ribet – Frame Profile 100 x
57mm) made from 1.20mm thick GI Sheet & Fixing arrangements AS PER BS 476 PART-
& 22 & IS: 3614 Part - II for Integrity, Stability.Door Size: 2000mm (W) x 2100mm (H) Rupees Twenty Five Thousand One Hundred
489 2.00 Including below Accessories S.S. Ball Bearing Hinges- 6 Nos Vision Panel with Fire Glass of 25138.90 No
Thirty Eight And Paise Ninety Only
Size: 200 x 300mm - 2 Nos Heavy Duty Door Closer - 2 Nos Heavy Duty Door Closer - 2 Nos
Panic Exit Device for Double Leaf Door - 1 No. External Trim Bar (Panic Latch) - 1 No.
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
HAND APPLIANCES :- Providing and fixing ABC type fire extinguishers consisting of welded
MS cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge
internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle,
Rupees Five Thousand Two Hundred Seventy
490 17.00 suspension bracket, conforming to ISI finished externally with red enamel paint and fixed 5279.27 Each
Nine And Paise Twenty Seven Only
to wall with brackets complete with internal charge. Capacity 6.0 kg. I.S.I. Marked.(
Providing and fixing Trolley type foam fire extinguishers cap. 50 liters. 50 litres capacity
Rupees Sixteen Thousand One Hundred One
And Paise Forty Two Only
Providing and fixing in position Co2 gas type fire extinguishers of 4.5 kg. capacity each.(
Rupees Six Thousand Four Hundred Fifty One
And Paise Eighty Eight Only
Providing and fixing Trolley type Co2 gas fire extinguishers cap. 9 liters will be provided for
Rupees Seven Thousand Six Hundred Twenty
493 1.00 transformer area.( 7625.50 Nos.
Five And Paise Fifty Only
Providing and keeping in position standard sand buckets filled with clean sand and painted
Rupees Nine Hundred Thirty Five And Paise
494 14.00 red from outside at various places.( 935.26 Nos.
Twenty Six Only
Providian’s Escape Sigane:- Photoluminescent rigid plastic, 2mm thickness, printed on high
quality glass paint with UV resistance, 5 year warranty, material used-non radioactive, non-
phophorous, non toxic and lead free. Available in different types & sizes, time after
removing the light source (in minutes):- 60 minutes, luminescent Rupees Two Thousand Five Hundred Forty
intensity(milicandelas*per square meter-mcd/sqm):30 mcd/sqm. Luminescent intensity Five And Paise Twenty Only
greater than 0.32 mcd/sqm, period of light decay* (in minutes) :3100 (1) “Fire Exits” ( Size
365 x 119 x 84 mm or nearest )
(2)Fire exit signs of standard size ( Size 450 x 200 x 84 mm or nearest ) (photoluminous
type.(glowing in dark type)Providing and fixing portable fire extinguishers of approved Rupees Four Thousand Six Hundred Seventy
496 14.00 make ISI marked of following Capacity at the places shown on Drawing & mentioned in 4675.29 Nos.
Five And Paise Twenty Nine Only
Providing, fixing, testing and commissioning of below Auto Glow Signages. In Case of Fire
Rupees Nine Hundred Thirty Five And Paise
497 14.00 do not use Lift ,Use Staircase 8"x 8" 935.26 Nos.
Twenty Six Only
ADDITIONAL WORK:- Core Cutting in RCC wall, beam, columns and roof as required
locations of required size & depth and repairing , making it goods complete . Size 40mm to Rupees Six Hundred Seventy Five And Paise
80mm dia ( avarge depth 200) Sixty Nine Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Core Cutting in RCC wall, beam, columns and roof as required locations of required size &
depth and repairing , making it goods complete :- Size 100mm to 200mm dia ( avarge Rupees One Thousand Two Hundred Ninety
depth 200) Seven And Paise Eighty Five Only
Providing and fixing cast iron following size complete with bolts, nuts, washers and
Rupees Six Thousand Two Hundred Twenty
500 2.00 neoprene gaskets as per specifications. 100mm dia y strainer in main suction header 6222.63 Nos.
Two And Paise Sixty Three Only
Supply & fixing of testing and commissioning of stainless steel Y-strainer fabricated out of
1.6mm thickness steel, grade 304, sheet with 3mm dia holes with stainless steel flange. Rupees Nine Thousand Nine Hundred Ninety
150mm dia. Size Nine Only
Supply & fixing of testing and commissioning of Orifice plate made out of 6mm thick
stainless steel Grade-304, with orifice of required size to be fitted between flange & Rupees One Thousand Two Hundred Twenty
502 12.00 landing valve of external & internal hydrants to reduce pressure at the outlet to the level of 1229.12 Nos.
Nine And Paise Twelve Only
3.5 kg. cm2 complete as required.
Earthing with G.I.-pipe earth pipe 4.5 metre long, 40 mm dia including accessories, and
providing masonry enclosure with cover plate having locking arrangement and watering Rupees Seven Thousand Eleven And Paise
pipe etc. with charcoal/ coke and salt as required. Forty Two Only
Earthing with G.I.-pipe earth plate 600 mm X 600 mm X 6 mm thick including accessories,
and providing masonry enclosure with cover plate having locking arrangement and Rupees Eleven Thousand Four Hundred
504 3.00 watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 11427.14 Nos.
Twenty Seven And Paise Fourteen Only
Costing for Liasion work with authority and obtaining Pre & Final NOC and all relevant
Rupees Eighteen Thousand Two Hundred
505 1.00 applicable approvals including required drawing work. 18291.10 Lot
Ninety One And Paise Ten Only
Estimated Rates
Total Qty Item Description Unit Amount
No. In Rupees In Words
Deduct credit value of distmentaling Existing Old building material like Roofing sheet,
Rupees Four Lakhs Three Thousand Three
506 1.00 RCC,Fabrication of all material, door-window etc. complete.List of Buldings-( Old Staff -403316.00 Job -403316.00
Hundred Sixteen and Zero paisa Only
quarter and Operation block) at SDH Dharampur Ta.Dharampur Di.Valsad as Rs. -4,03,316/-
I/We am/are willing to carry out the work at …………………………………………………………………………………….. % above / below percent (should be written in figures and words) of the estimated rate mentioned above. Amount
of my/our tender works out as under.
* Estimate Amount Estimate Amount
Put to tender Rs…………………………………… Put to tender Rs……………………………………
Deduct………..% below Rs…………………………………… Add……..% above Rs……………………………………
(* Please strike out whichever is not applicable).
All works shall be carried out as per Public Work Department Handbook and other specification of Division or as directed
All the columns in Schedules should be filled in ink and the total of the entries ink last column should be struck by the contractor under his signature
Dy. Executive Engineer(Civil) Dy. Executive Engineer(Elect) Executive Engineer(Civil) Executive Engineer(Elect)
PIU Zone-7, Valsad PIU Zone-7, Valsad PIU Zone-7, Valsad PIU Zone-7, Surat
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01-Make List-4171-06-10-2017.pdf
02-Make List - Civil Items-05-02-2020.pdf
Condition for cement.pdf
GR RnB Revise.pdf
GR-TMT-Lap Length.pdf
INSTRUCTIONS TO PERSON TENDERING.jpg
JPG
Performance Bond and SD-Paripatra-2023.pdf
PIU SPECIAL CONDITIONS.pdf
Inclusion of Insurance clause as per new SBD.pdf
6372 Make List HO 15.10.2025.pdf
Performance Bond and Bitumen date.pdf
Drawing-1.pdf
Drawing-2.pdf
Electric city.pdf
Ele-List of Approved Products-FINAL.pdf
Specification.pdf
Spacial Condition.pdf
Schedule B.pdf
SBD.pdf
Tender Document.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .