WBPWD/EE/PED/NIQ13 /2025-2026

Amount

Electrical Installation work Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.(D3/4a)100A [ Make- L & T/SIEMENS/ Havells]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachmentEnclosure Legrand 6 way(607716/Enclosure (LTTD06N))(Legrand/Schneider/Seimens/L&T)(D10/14)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.2+12wayEnclosure (607712)(D9/13)(Legrand/Havella)Enclosure (607711)

2+8 way Enclosure (607711)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection(D6/7)6-32A SP(Legrand/L&T/Havells)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.(D5/6) 63A FP(Legrand/Laurenz Kundson(L&T)/Havells)

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) 2 bar 240V 63A Dimension of Cu. bars [85mm long] 2 x 20x5mm & Dimension of Sheet Metal Box 300x150mm(NS)

Supply of 1.1 kv grade Al Armoured cable (Havells/polycab/KEI) 4cx35sq mm

4c 10sq mm(For Compound Light)

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting(F1/2b)

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting(F1/2c)

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed(F2/1a)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below (F4/7c)4 core 35

4 core 10sq mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials4 core 35 sq mm(F5/bxv)

4 core 10 sq mm(F5/bxi)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish2x22/0.3 (Ph. & N) and 1x22/0.3 as ECCAverage run 7 mtr(E9/2aii)

on board [E-12/6(a)]

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) 13mm dia 3mm thick Polythene Pipe[E-2/1(a)]

19mm dia 3mm thick Polythene Pipe[E-2/1(b)

Cutting Channel of size (31 mm x 31 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge (3 mm thick) Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles 13mm dia 3mm thick Polythene Pipe[E-2/5(a)]

19 mm dia 3 mm thickCutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles19 mm dia 3 mm thick polythene pipe without earth continuity wire(E-3/6a)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe as per GS.3 x 22/0.3 (1.5 sqmm)(E9/1b)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC(E9/1s)

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC(E9/1v)

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC(E9/1y)

Supply & Delivery ' sweep AC exhaust fan (EPC heavy duty/ Usha turbo LD DBB) 1370 r.p.m.23 cm (9")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)For AL 23 cm (9")(D14/32a)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter23 cm (9")(C4/28a)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.1.5 sq mm

Supply & Delivery of single LED Tube light fitting 4' 18W T8 LED tube light with complete set (Make:- Philips TMC 502 1 x T-LED 22W including MAS LED tube 18W 865 T8 I 2100lm or Bajaj/Crompton)

Supply & Delivery of twin 4' 18W T8 LED tube light with complete setMake:- Philips TMC 502 2 x T-LED 22W including MAS LED tube 18W 865 T8 I 2100lm or Bajaj/Crompton)

Supply & delivery of 48"(1200mm) sweep A.C. ceiling fan complete with all accessories. (Make: Orient - New breeze / Crompton high speed/USHA Striker)

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.[C-2/16]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length(c2/17)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.C-3/21(a)

Supply and Fixing 15W LED lamp with holder (Philips Make)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.[E-6/18(a)]

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)(D14/29)

Supply & Fixing 230v,50HZ tornado Wall ll 450 mm Energy Saving 3 Blade Wall Fan,Type: Wall Fan;Motor Speed: 1325RPM; ;Blade Sweep Size: 450 mm.

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required(E7/26)

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.(E17/5b)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required(E6/22)

S&F 20/25A plug top with necessary connection

Supply & Fixing 240 V, 2 nos 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F200 mm x 150 mm x 65 mmmm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required.200 mm x 150 mm x 65 mm(E4/12d)

240 mm x 200 mm x 65 mm(E4/12e)

Supplying and fixing sheet steel (16SWG) cable end box on TPN SFU enclosure with nuts bolts etc incl. powder coated painting.63/125A.(D5/5)

Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc(E5/15a)

Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.(E5/15b)

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(E19/17)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as belowBy ISI-Medium GI pipe(G1/2a)

Excavation of soil for installation of Earth Electrode and filling & rammingFor Morrum Soil(G1/1b)

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.(G3/c)

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core(F1/3a)

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required(F6/11D)

Supply & Fixing of highly efficient 240v min 100W outdoor led street light with driver inside a PDC housing whichi) Fixture & Driver should be same make and BIS approved.Minimum efficiency 110L/W protection IP65 or higher(Make-Crompton,cat no-CRP-411-100-57-SL-GL-NSG/Philips/Bajaj,Cat no-ZELA P120L WHPOTG SD)

S&f GI Looping cable box(8"x10"x4") with 4 stud connector with proper nsulation, including S&F necessary arrangement like nut,bolt & washer etc.

S&F of 32/40 mm. dia.(as required) 1.5 Mts. long G.I. pipe (medium) arm bracket grouted by 4 nos. 5” long GI nut bolt & 2 nos. “U” clamp arrangement on wall.

LED SIGNAGE :- Supply, Installation, Testing and commissioning of LED Illumination sign board fabricated by 20' x 5' (ft) x 5" (inch) depath or equivalent size on ACP box supported with 1"x1" MS hollow square pipe or Aluminium Hollow square pipe of 18 swg. All around. The 3 mm ACO facial should be provide3d with Laser cutting 6 mm laser cut Acrylic letters out of which 5 mm rising and border line of the front side shold with cover 1" Alluminium channel as per the direction of EIC. The sign board should be glow by 1.5 W LED module cool white in colour including 12 V 250 W power supply. Back side of the board should be covered with 26 swg GI sheet to protect rain water. The sign board should be fixed at the wall by using nut, bolt, washers etc. after making MS structure and grouting the same at wall and mending good the damages as per direction of EIC. The cost of transportation and scaffolding charges are included. inscription of the sign board should be as per direction of authority and as per direction of EIC.

SITC of AC MACHINE Supply & Delivery of high wall Fixed speed split air conditioner having the following general specification 1.star rating -2star or higher /2022-23 as per BEE/BIS 2. IS compliance-IS 1391 with its latest ammendment. 3.Refrigerant- R410/R32 4.Compressor- Rotary/Scroll. 5.Evaporator & Condensor coil: Copper 6. Operating outdoor temperature = 50*C and above. 7.Control system: The machine should be equipped with all the requisite control system for the total system /temperature/Air Distribution/Electrical power system and other like remote sensing device etc. 8. Power supply-240V 50HZ(Tollerance as per applicable standard) 9.Power consumption-As per BEE Norms. 10.ISSER-As per latest recommendation of BEE. 11.Thr air Conditioner should have the following capacity. Make- O-General/ Mithsubishi Electric/ Mithsubishi Heavy

2 ton or higher

1Ton or Higher

The scope of work also includes supply of the following and others to be supplied with the machines.i)necessary refrigeration copper pipe with nitrile rubber insulation -3mtr.ii)neccessary copper cable /cord(FRLS type- make:Finolex/Havells/Polycab/RR Kable/Mescab)-3mtr

S&F of additional following items for length exceeding 3 mtr for complete installation and commissioning of above AC Machines.

1.Supply & Fixing of extra refrigerant copper pipes of requisite diameter for 1 Ton/2Ton with nitrile rubber insulation of requisite thickness as per direction of E-in-charge. Liquid Line (1/4" OD with 0.8mm thick)

Suction Line (5/8" OD with 0.8mm thick)

3.supply & Fixing of 3 core PVC insulated FRLS grade copper cable (make-Finolex/Havells/ polycab/ RR Kable/Gloster) or requisite diameter for the above Air- Conditioner As per direction of Engoneer-in-Charge.

Supply& Fixing of PVC drain pipe or requisite size as per direction of Engineer-in-charge.

Installation,Testing & Commissioning of Indoor & Outdoor unit of above high wall split AC machine after makeing hole in wall etc as per direction of EIC including S&F of necessary fixing arrangement for indoor and outdoor unit,duly painted ,laying and makeing connection of refrigeration pipe ,power cable,drain pipe wtc including supplying & charging the extra refrigerant as required as per direction of the EIC.

INVERTER SITC of 2000 VA pure sine wave Inverter (single phase in single phase out, Output Voltage at No Load- 180V ~ 260V AC, Output Frequency- 50Hz ± 1Hz, Output Wave Form- Pure Sine Wave, Nominal Battery Voltage- 24V DC, Battery Low Cut Off- 10.5V ± 0.2V DC) including necessary connection as per direction of EIC. (Make- Microtek, Model- HEAVY DUTY 2350 (24V) SW or equivalent model of Exide/Luminous).

SITC of 200 AH(12vbattery-2nos) inverter battery including necessary connection as per direction of EIC. (Make- Exide, Model- EXIDE INVATUBULAR, Cat No.- IT750 or equivalent model of Luminous/Livguard).

Supply and delivery of special type Trollet made of suitable size of angle iron frame with two number Sheet Metal table platform suitable for accomodation of two nos. Battery and Inverter as per direction of EIC.

MODERN ELECTRICALS (BID ID -7478012)

SAIBAL SARKAR (BID ID -7477820)