Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹39.8 LAccepted-AOC NEAR KRIPAN GATE PO BINNAGURI DIST JALPAIGURI W B PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹43.6 L+₹3.2 L (7.99%)Rejected-Finance GARRISON ENGINEER GE NORTH BINNAGURI | JALPAIGURI | WEST BENGAL | 735232 | L-2 | Rejected-Finance Being L-2 | |
| 3 | L-3₹44.1 L+₹3.8 L (9.30%)Rejected-Finance BANKIM CHANDRA ROAD HAKIMPARA SILIGURI DIST DARJEELING PIN 734001 W B | JALPAIGURI | WEST BENGAL | 734001 | L-3 | Rejected-Finance Being L-3 | |
| 4 | L-4₹44.5 L+₹4.1 L (10.2%)Rejected-Finance 65 JOY NARAYAN BABU ANANDA DUTTA LANE HOWRAH 711101 | HOWRAH | WEST BENGAL | 711101 | L-4 | Rejected-Finance Being L-4 | |
| 5 | L-5₹45.7 L+₹5.3 L (13.2%)Rejected-Finance P O BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L-5 | Rejected-Finance Being L-5 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
12 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NORTH) BINNGURI
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
CERTAIN MISCELLANEOUS B/R AND E/M REPAIRS TO MARRIED ACCOMMODATIONS AT YOGENDRA YADAV VIHAR UNDER GE (NORTH) BINNAGURI
2024_MES_675747_1
NIT No. 8701 / 65 / 2024-25 / 07 / E8
Open Tender
Civil Works
Item Rate
270 days
BINNAGURI CANTONMENT
Class D Category a (i)
8 documents required · 8 mandatory
₹500
GE (NORTH) BINNAGURI
₹80,000
Yes
28 Dec 2024
21 Sept 2024
14 Oct 2024
21 Sept 2024
12 Oct 2024
5 Oct 2024
Amount
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each including Builder's Hardware and removing from the site including dismantling brick work for hold fasts etc and making good disturbed surfaces complete all as specified and as directed.
Taking down chowkats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each including Builder's Hardware and removing from the site including dismantling brick work for hold fasts etc and making good disturbed surfaces complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm each but n. exc 2 Sqm each including Builder's Hardware and removing from the site complete all as specified and as directed.
S&F for pressed steel frames for doors with one or more rebates including provisioning of necessary supply and fixing, lugs, hinges, lock strike plate, etc. complete as specified, size of frame 125 x60 mm and 1.25mm thick including one shop coat of priming complete all as specified and as directed.
S&F for pressed steel frames for doors with one or more rebates including provisioning of necessary supply and fixing, lugs, hinges, lock strike plate, etc. complete as specified, size of frame 105 x60 mm and 1.25mm thick including one shop coat of priming complete all as specified and as directed.
S&F of 35mm thick 2nd class hard wood factory made, plain, framed, panelled shutter with lock rails and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 Part-I klin seasoned and chemically pressure treated complete all as specified and as directed.
S&F of factory made 35mm flush shutter, solid coare construction, with block board core and plywood face panels, commercial type on both side etc complete all as specified and as directed.
S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/cupboard & other Chowkhat of size 50 x 47 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: (a) For WPC solid door/cupboard frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (b) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.
S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as specified and as directed.
S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour printed PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F of Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
Easing of door shutters (area n exc 2.00 sqm) for properly closing/opening, tighting of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt etc with out taking down complete all as specified and as directed.
Refixing of shutter exc 1 Sqm but n. exc 2 Sqm after necessary repairs in the same opening including taking down complete all as specified and as directed.
M&L in repair for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.
S&F 100 mm butt hinges stainless steel complete all as specified and as directed.
S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F Aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified .
S & F Hasp and staple aluminium anodised of size 125 mm, including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S&F of Stainless steel butt hinges, medium weight of size 100mm complete all as specified and as directed.
S&F aluminium anodised extruded fabricated type handle 150mm long complete all as specified and as directed.
S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e. glazed & wire gauged shutter including all fittings like MS hold fast, box hinges, Handles , MS Tower Bolts ,Stoppers, hinges, MS stay with long screw, MS spring latch, complete with glazing bars including one shop coat of zinc chrome primer complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures. (b) Glass, wire mesh, MS Guard Bar/ grill and painting only shall be measured and paid separately under relevant items of Sch. (c) The Drawings referred above are available in the office of Engr-in-Charge and can be referred in the office working hours if required.
All as per Item No. 23 above steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars including taking down of old steel ventilators of any size complete all as specified and as directed.
M&L for mild steel framed work such as grills/MS guard bars, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, fixed type window frame, door chowkath, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including primer complete all as specified and as directed.
All as per item No 23 above but without glazing bars and with out grill/guard bar complete all as specified and as directed.
Dismantling expanded metal,(weight n exc 4.00 kg/Sqm) any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F Expanded metal, (weight n exc 4.00 kg per Sqm) cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed.
M&L for cleaning/washing of new pre-primed steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed.
Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.
M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in frame filling , gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work as required complete all as specified and as directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking down cement plaster complete all as specified and as directed.
M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms, corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:6) including rounding the exposed surfaces of granite complete all as specified and as directed.
All as per item No 40 above but as in skirting (18 to 20 mm thick) but on 10 mm thick rendering/ back coating in CM (1:4) complete all as specified and as directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and as directed.
M&L Glazed ceramic coloured tiles in vertical surface/dado of size 450x350x7mm/300x600x7-8mm thick set and jointed in neat cement slurry and pointed white or colour cement to match complete all as specified and as directed. Note: Backing coat will be measured and paid separately.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to receive a wall tiles using cement mortar 1:4 complete all as specified and as directed.
Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.
M&L for brick work with fly ash bricks having minimum compressive strength 75Kg/Sqcm straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
All as per Item No. 47 above but without bricks complete all as specified and as directed. Note: The serviceable bricks obtained from demolition shall be reused.
Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for 15 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm thick & 5mm thick each) mixed with water proofing compound in top layer @200ml per bag of cement or as per manufacturer's instructions finishing the surface fair & even complete all as specified and as directed. Note : Liquid water proofing compound shall be measured and paid separately as supply only.
M&L for 15 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm+5 mm) with ready mixed pre-packed proportioned dry mix mortar blended with PP fibers, mixed with liquid water proofing compound @200ml per bag of cement or as per manufacturer's instructions on other than fair faces of brick wall or concrete surfaces additives on external surfaces incl. transporting of material, mixing, curing, scaffolding etc complete all as specified and as directed. Note : Liquid WPC will be measured and paid separately.
M&L for rendering 5 mm thick cement plaster on ceiling cement mortar (1:3) finished even and fair without using extra cement complete cement all as specified and as directed.
M&L for rendering 15 mm thick plastering in Cement mortar (1:6) on fair/unfair faces of brick masonry finished even and fair without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound confirming to relevant IS complete all as specified and as directed.
M&L for preparation of newly wall plastered surfaces and applying three coats of white wash on wall to match the existing colour complete all as specified and as directed.
M&L for preparation of newly ceiling plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.
M&L for preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.
M&L for complete removal of existing treatment and preparation of old surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over treated surfaces complete all as specified and as directed.
M&L for one coat of acrylic based distemper on old surface of wall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.
M&L for one coat of white wash on ceiling of old surface with preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Material & labour PCC (1:3:6) Type C-2 (40 mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth w/o using extra cement complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed.
S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.
Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed. Note: The serviceable GI tubing obtained from taking down shall be reused.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and as directed.
S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.
Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 20 mm bore complete all as specified and as directed. Note: The serviceable GI tubing obtained from taking down shall be reused.
S&F in repair 15mm bore bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed.
S & F in repair 15mm bore concealed stop cock CP, cast copper alloy fancy type with long shank and cup for 15mm pipe complete all as specified and as directed.
S&F in repair 15 mm dia brass chromium plated angle cock complete all as specified and as directed.
S&F in repair 15mm bore Bib tap standard of CP / PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and as directed.
S&F in repair 15mm bore fancy type pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified and as directed.
S&F in repair 15mm bore Stop cock of CP any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair 15mm bore Swivel shower of CP any colour for fixing with 15mm pipe complete all as specified and as directed.
S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including CP waste coupling, PVC connection 450 mm long, waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand etc complete all as specified and as directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S&F in repair vitreous china squatting pan "Orissa" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap fron or back inlet etc including connection to trap tand flushing pipe and provision of lime concrete bedding complete all as specified and as directed.
S&F in repair 10 ltr capacity PVC flushing cistern low level white colour including PVC connection 450 mm long, PVC flush pipe of reqd length etc complete all as specified and as directed.
S&F in repair vitreous china wash down water closet pedestal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium/PVC hinging devices & EWC Jet chromium plated with 1.00 mtr long PVC connection pipe etc complete all as specified and as directed.
S & F in repair grating doom 125mm dia with or Without waste hole of PTMT (min wt 40 gms) complete all as specified and as directed.
S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
Taking down PVC pipe including all fittings complete all as specified and as directed.
S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed.
S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed.
S&F 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door complete all as specified and as directed.
S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal complete all as specified and as directed.
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Fins, fascias, louvres, parapets and railings, newels, balustrade & the like complete all as specified and as directed.
Use & wastage of formwork to fins, louvers, fascia. Etc for fair finished surfaces of concrete flat complete all as specified and as directed.
M&L Mild steel TMT bars 6mm to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.
S& F in repair 25 mm dia PVC coated MS curtain rod with require brackets, decorative peace on ends with teak finish appearance as in repairs complete all as specified and as directed.
S & F extra over item of block board or veneered particle board for external teak wood lipping, 6mm thick, fixed with complete all as specified and as directed.
S&F in repair sink with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
Supply and fixing in repair for 15mm bore brass chromium plated fancy type long body bib cock with wall flange fixed complete all as specified and as directed .
S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.25kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge width of aperture 1.40mm including taking down of old existing window of any description and making good disturbed surface of wall complete all as specified and as directed.
Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.
M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for applying roof treatment, finished even and fair without using extra cement complete all as specified and as directed. Note: The WPC shall be measured and paid separately as supply only.
M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges, padding on roof (where ever required) etc complete all as specified and as directed.
M&L for waterproofing coating with polyurethane based water proofing liquid membrane of approved make to be applied by brush with multi coats with minimum dry film thickness of 1mm and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane complete all as specified and as directed. Note: The above treatment will be carried out by authorised applicator of approved firm/company.
INTERNAL ELECTRIFICATION Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.
Taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.
M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly, one light point controlled by one, one way switch complete all as specified and as directed for the following:-
All as per item No 105 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.
All as per item No 105 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.
All as per item No 105 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.
All as per item No 105 here in before but for one bell point controlled by one, bell switch 5 Amps complete all as specified and as directed.
All as per item No 105 here in before but for one light point controlled by one, two way switch 5 Amps complete all as specified and as directed.
All as per item No 105 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.
S & F switch piano single pole flush type 5/6 amps, 230 volts one way complete all as specified and as directed.
S & F switch piano single pole flush type 5/6 amps, 230 volts two way complete all as specified and as directed.
S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.
S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.
S & F switch piano single pole flush type 15/16 amps, 230 volts one way complete all as specified and as directed.
S&F Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with complete all as specified and as directed.
S&F in repair switch socket combination 2 in 1, 6 Pin, 5/6 amps and 15/16 amps multipurpose flush non shutter, non inter locking type white ivory finish with complete all as specified and as directed.
S&F in repair ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.
S & F in repair lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.
S&F LED white glass Lamp 1x9/10 Watt 230V Base-22 complete all as specified and as directed.
S & F deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.
S & F in repair switch piano single pole flush type 5/6 amps, 230 volts one way complete all as specified and as directed.
S & F deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.
S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.
S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.
S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.
S & F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unserviceable fitting complete all as specified and as directed.
S&F of Bulk head luminaire with B22 base holder suitable for 10 Watt LED inverter type bulb light IP66 grade, with and including 9 watt LED (or nearest next higher wattage) lamp (LED Bulb with B22 base 900 Lumens in normal mode and 450 lumens in power back up mode, charging time 8-10 Hrs and around 4 Hrs Power backup with inbuilt surge protection of 3 KV) (or nearest next higher wattage) and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed.
S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.
M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic concealed conduit complete all as specified and as directed. Note: Two runs of submain wiring cable alongwith one run of earth wire with and including 25mm dia PVC conduit pipe shall be measured as one unit length.
All as per item No 131 above but using two runs 4.0 Sqmm multistranded copper conductor single core cable with one run 4.00 Sqmm multistranded copper conductor single core cable as earth wire complete all as specified and as directed.
S&F in repair MCB TPN 40 to 100 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessary connection complete all as specified and as directed.
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete with and including taking down old unserviceable one all as specified and directed including taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.
S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete with and including taking down old unserviceable one all as specified and directed including taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.
S&F in repair MCB, Single pole & neutral, 32 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed.
S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one complete all as specified and as directed.
S&F in replacement of epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 Volts, C Series current carrying capacity 10 kA, including necessary connection complete all as specified and as directed.
Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 3 of SSR Part- I including testing on completion including dismantling of old one all as directed and as specified.
Shri Amarnath Sah (BID ID -3136159)
M/s. MD IRSHAD (BID ID -3135897)
M K Engineering WOrks (BID ID -3135607)
BBKundu (BID ID -3136357)
L. B. SHARMA (BID ID -3133528)
SS SHARMA (BID ID -3136777)
samrat saw mill and joinery workshop (BID ID -3130060)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .