Loading
Loading…
Loading…
Tender Value
₹72.0 L
EMD Value
₹1.4 L
Closing Date
5 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
16 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender
UPLOADING OF THE CERTIFICATE:-The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure- V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP)etc., as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
DEFINATION OF SIMILIAR NATURE OF WORK:-Any Signaling Work of 1.1.1 EI/PI/RRI/IBH/ABH/LC Gate Interlocking Track circuit works /Axle counter works etc.
8 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All payment and other conditions are attached with tender document.
Although year of specification is given in the schedule, last amendment, if any, shall apply.
All tenderer must have valid GSTN number and rates must be inclusive of GST Act and itsamendment.
Compliance of GST act/rules & correction/modification issue by railway board with regard toGST act shall be binding on contractor & railway.
Genral instruction :- 1 The offer will be evaluated based on certificates enclosed with theoriginal offer only. The Railways will not enter into any correspondence to get thesecertificates subsequently and the offer shall be evaluated based on the documents submittedalong with the offer.2 Tenderer may please note that meeting of eligibility criteria is strictlybased on completion certificates issued by the executive in charge of work and not linkedwith mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways. 3 Tenderer may please note that fulfilling of eligibility clause shall beascertained only from the completion certificates issued by the executive-in-charge of workand mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways shall not be enough. It may also be noted that cognizance of thoseworks, which are nearing completion or have been almost completed, shall not be taken onlythose completion certificates, wherein successful commissioning satisfactory performanceof work have been clearly unambiguously acknowledged by Executive-incharge of anyRailway Unit or any Govt. Dept./Undertaking for any similar work shall be considered for thispurpose.4 Any variation to quantities in any item and its associated wiring material account ofsupply and installation will have to be born by the tenderer. Railway Engineer s decision inthis regard shall be final.5 All drawings related with the work can be obtained from the officeof DRM Kota on any working day during office hours.
Provision of Trap/derailing switch to enable stabling on long haul loop line at Thuria, Laban, Chhoti Udai & Piloda stations.
KOTA-SNT-SIG-2025-39R
KOTA-SNT-SIG-2025-39R
Open
Works - General
12 Months
Kota, Rajasthan
₹0
₹1.4 L
5 May 2026
11 Apr 2026
21 Apr 2026
97 items across 2 schedules · ₹71,98,771.13 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | "Supply of Relay AC Immune, Plug-in type, DC Neutral Line 60V 4F/4B, 5F/3B, 6F/2B, front and back contacts metal to metal, conforming to IRS: S-46, S-23, S-34 as applicable and firm's specification. The relay housing shall contain two miniature identical relays in a mini group housing complete with base plate. Note: Base plate inspected by consignee with OEM /Manufacturer testing & guarantee certificate. | Numbers | 22.00 | — | — |
| 2 | Supply of Plug-in type, two DC neutral line, mechanically interlocked, in mini group housing, complete with base plate each 60V 5F/3B, 4F/4B front and back contacts metal to metal conforming to IRS: S-46, S-23, S-34 as applicable and firm's specification. The relays of various contact configuration shall be given by site incharge as per requirement. Note: Base plate inspected by consignee with OEM /Manufacturer testing & guarantee certificate. | Numbers | 22.00 | 11,173.67 | 2,45,820.74 |
| 3 | Supply of Point Group, RRI, (Ref. IRS: S-46) Siemens Make (No. RSSK 3515/19) or equivalent without base plate along with guide rail conforming to specifications IRS: S- 23, S@45"44@ S-46 as applicable & firm's specifications. | Numbers | 4.00 | 1,15,315.11 | 4,61,260.44 |
| 4 | Supply of Point Chain Group (Ref. IRS: S-46) Siemens make (No. RSSK 3515/3) or equivalent without base plate conforming to specifications IRS: S-23, S@45"44@ S-46 as applicable & firm's specifications. | Numbers | 4.00 | 49,926.74 | 1,99,706.96 |
| 5 | Supply of Signal Group 2- Aspect Siemens Make, type A- RT- RGA066 suitable for LED signal or equivalent without base plate along with guide rail conforming to specifications IRS: S- 23, S- 34, S- 46 as applicable & specifications of firm. | Numbers | 4.00 | 48,586.9 | 1,94,347.6 |
| 6 | Supply of Shunt Signal Group Siemens Make, type A- RT- RG- A065 suitable for LED signal or equivalent without base plate along with guide rail conforming to specifications IRS: S- 23, S- 34, S- 46 as applicable & specifications of firm. | Numbers | 4.00 | 70,077.69 | 2,80,310.76 |
| 7 | "Supply of Relay Plug-in type, Style AC- LED All aspects, AC lamp proving relay unit with in- built current transformer type, slow release neutral line relay, 4F/4B contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110V AC, LED signal lamp rated at 15W confirming to RDSO spec. STS/E/Reelys/AC lit LED signal/ 09- 2002, BRS:941A, IRS: S- 34 & IRS: S- 23 (as applicable). The interlocking code for this unit shall be ABDHK. Note: Base plate shall be inspected by consignee with OEM /Manufacturer testing & guarantee certificate." | Numbers | 10.00 | 8,601.77 | 86,017.7 |
| 8 | Supply of Relay, AC Immune, Plug-in type, Style QNA1, DC Neutral line, 24V 8F/8B or 12F/4B contacts, front and back contacts metal to carbon with plug board, retaining clips & connectors conforming to BRS:931A, IRS: S@45<44@ S@45"44@ S-23, Interlocking pincode ABDGH. The relays of various contact configuration shall be given by site incharge as per requirement. | Numbers | 16.00 | 5,592.59 | 89,481.44 |
| 9 | Supply of Key Lock Relay AC immunised with different ward combinations (Five extra sets of ward plates to be supplied with each relay). Siemens make working on 60V DC 4F/4B or equivalent (Extra No. of wards to be supplied with the consultation of Engineer in charge of work, as per requirement of site and no additional cost will be paid for extra wards). The ward combination shall be A, B, C, D, E, F , G--------Z. | Numbers | 4.00 | 10,148.88 | 40,595.52 |
| 10 | Supply of Base Plate for Point Chain Group or its functional equivalent. | Numbers | 4.00 | 12,908.2 | 51,632.8 |
| 11 | Supply of powder coated Relay Rack Assembly Complete with scaffolding, fixtures and accessories including MS Bars for fixing of relay plug board, string rods, fuse strips with bracket, 11-Way Bus Bars with cover and mounting brackets, runway for cable/wires, frame base assembly with IDF pillar etc. Siemens type & as per extant practice on W.C. Rly. Typical part list as per Annexure 'J' attached and Rack arrangement as per WCR DRG. No. S&T EQPT. BLDG/2013/Pt. 1/4 and Rack plan as approved by Engineer incharge. | Set | 4.00 | 28,590.83 | 1,14,363.32 |
| 12 | Supply of Tag Blocks 200 way with cover as per specification IRS: S-77/2006 (Rev.1 or with latest amendments). as per drg no SA-24751. | Numbers | 3.00 | 2,237.25 | 6,711.75 |
| 13 | (i) Supply of 4 conductor disconnect terminal blocks for test and measurement suitable for at least 2.5 mm2 conductor as per RDSO specification No. RDSO/SPN/189/2004 with latest amdt. | Numbers | 604.00 | 66.79 | 40,341.16 |
| 14 | (ii) Supply of End plate as per RDSO specification No. RDSO/SPN/189/2004 with latest amdt. | Numbers | 50.00 | 12.87 | 643.5 |
| 15 | (iii) Supply of Din rail of dimension 35mm X 7.5 mm, 1 mm thickness unslotted as per RDSO specification No. RDSO/SPN/189/2004 with latest amdt. | Numbers | 6.00 | 115.99 | 695.94 |
| 16 | (iv) Supply of End Stop for Din 35 Rail 10 mm wide as per RDSO specification No. RDSO/SPN/189/2004 with latest amdt. | Numbers | 109.00 | 11.37 | 1,239.33 |
| 17 | Supply of PVC indoor cable 1x60x0.6 mm dia colour coding of insulation of inner core shall be in six colour viz. Blue, Red, Green, Grey, Brown & Black conforming to IRS 76/89 or latest. | Kilometre | 1.20 | 1,90,483.65 | 2,28,580.38 |
| 18 | Supply of PVC indoor cable 1x40x0.6 mm dia colour coding of insulation of inner core shall be in four colour viz. Yellow, Shite, Pink & Violet conforming to IRS 76/89 or latest. | Kilometre | 1.10 | 1,32,805.35 | 1,46,085.89 |
| 19 | Supply of PVC indoor cable 1x24x1 mm dia colour coding of insulation of inner core shall be in six colour viz. Blue, Red, Green, Grey, Brown & Black conforming toIRS 76/89 or latest. | Kilometre | 1.00 | 1,91,909.14 | 1,91,909.14 |
| 20 | Supply of flexible multistrand copper wire size 16/0.2 to IS 694 of various colours suitable for wiring of 'Q' series realys. The contractor shall obtain approval for colour wise quantiy from executive incharge before placing order for this item. | Kilometre | 1.00 | 8,791.4 | 8,791.4 |
| 21 | Supply of Domino units with cover plates as per approved panel diagram, each of size 54 x 34mm completely wired up similar to Siemens make. Each domino unit should have all the 15 contact terminals wired up. | Numbers | 76.00 | 1,312.16 | 99,724.16 |
| 22 | Supply of High power main signal with LED aspect integrated type, current Regulator and Health Monitor Alarm Unit as per RDSO Specn. No RDSO/SPN/199/2025 Rev. 1.2 with Amendment 1 or latest-Red | Numbers | 4.00 | 8,243.51 | 32,974.04 |
| 23 | Supply of High power main signal with LED aspect integrated type, current Regulator and Health Monitor Alarm Unit as per RDSO Specn. No RDSO/SPN/199/2025 Rev. 1.2 with Amendment 1 or latest-Yellow | Numbers | 4.00 | 8,243.51 | 32,974.04 |
| 24 | Supply of calling ON Unit LED integrated type as per RDSO Specn. No RDSO/SPN/153/2023 Rev. 5.0 or latest | Numbers | 18.00 | 5,070.97 | 91,277.46 |
| 25 | Supply of Main Signal Post 140 mm outer dia 4.6 Mtr Length as per specification No. IRS: S- 6 with latest amendment. | Numbers | 4.00 | 8,951.24 | 35,804.96 |
| 26 | Supply of Cast iron main signal surface base 140mm as per specification No. IRS: S-10 and Drg No. S-2011/M with latest amendment, with CLS Ladder assembly complete and ladder base for CLS signal 3.6 mtrs/ 4.6 Mtrs./ 5.6 Mtrs. long as per RDSO Drg. No. SA- 23150/23153/23156 (Adv.) with latest amendment. This also include, signal front & Back staging complete assembly for CLS unit as per Drg. No. RST/11413. | Numbers | 4.00 | 13,922.47 | 55,689.88 |
| 27 | Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway signaling suitable for RE area TWO Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23003A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Rev 2.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest. | Numbers | 4.00 | 23,636.24 | 94,544.96 |
| 28 | Supply of Off-Set bracket 5-1/2 '' for Signals & Routes as per Specification No. IRS: S-10/78 and Drg no. SA-23080(Adv) Alt-1 or with latest amendment. | Numbers | 10.00 | 1,317.07 | 13,170.7 |
| 29 | Supply of Shunt Signal Post complete with Base. GI Pipe, 'B' class of 80mm Dia. of min. 1 meter length to be supplied by the contractor. | Numbers | 6.00 | 3,564.2 | 21,385.2 |
| 30 | Supply of position light LED based shunt signal unit (as per RDSO Drg. No. SA-23840). | Numbers | 6.00 | 12,613.89 | 75,683.34 |
| 31 | Supply of Retro reflective Signal No. plates as perIRSEM Drg No. 19-D10 with clamps, nut, bolts and other accessories required for Fixing. | Numbers | 10.00 | 646.65 | 6,466.5 |
| 32 | Supply of Pad Locks 50 mm with common key make Godrej / Navtal only. | Numbers | 20.00 | 353.02 | 7,060.4 |
| 33 | Supply of Electric Point Machine IRS make 110V DC operation (AC immunity 160V) NONTRAILABLE, complete with lock, detector, cable termination box and slides for lock and detector (Rotary locking) as per specification no. IRS: S-24/2002 amendment-1 or latest, requirement of point machine is 143 mm throw only as per RDSO Drg. No RDSO/S- 10800. | Numbers | 5.00 | 72,527.41 | 3,62,637.05 |
| 34 | Supply of Ground Connection complete set suitable for IRS type Point machine for ordinary turnout of 60 Kg rails as per RDSO Drg. RDSO-S-3361. | Numbers | 5.00 | 11,205.57 | 56,027.85 |
| 35 | Supply of G. I. Bend pipe, 'B' Class/ Medium Grade, 50 mm Dia & 1.2 M straight length and having fixing plate welded with bent pipe as per Drg. No. Dy.CSTE(Con)/Kota/5 for point machine cable entry. | Numbers | 5.00 | 393.83 | 1,969.15 |
| 36 | Supply of Pre-wired Crank Handle cum Key Lock Relay box (of metal) along with accessories viz. LEDs, with approved type push buttons, terminal strips, string rod, etc. as per Drg. No. Dy.CSTE/C/Kota/6 (A) & (B). | Numbers | 5.00 | 12,049.6 | 60,248 |
| 37 | "Supply of William stretcher nylon insulation Set suitable for ground connection for motor point operation. Each set comprising of - (RDSO Drg. No.) T-10367-1 no.,T-10368- 2 nos., T-10371- 4 nos. and conforming to the Specification IRS: S-23 & 40/84 with latest Amendment." | Set | 15.00 | 650.91 | 9,763.65 |
| 38 | Supply of Gauge Tie plate nylon insulation as per RDSO Drg. No. (T-10372- 1 no., T-10368- 3 nos., T-10371- 6 nos. in each set) and to the Specification IRS: S-23 & 40 with latest Amendment as applicable. | Set | 15.00 | 297.82 | 4,467.3 |
| 39 | Supply of Thermo shrink Jointing Kit for jointing underground 0.9 mm dia. cond. 4/6 quad cables as per specn No. IRS: TC-77/2012 (Rev.3.0) with Amend. 1, 2 & 3 or latest. | Numbers | 22.00 | 3,402.91 | 74,864.02 |
| 40 | Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward no. 41 (as per Specification No. IRS: S-30/64 & RDSO Drg. No. SA- 3376/M with latest Amendments) on both the doors, duly painted with red oxide.-Single Case as per Drg. No. SK- 783-1/2 & 2/2 with latest alteration. | Numbers | 10.00 | 20,558.68 | 2,05,586.8 |
| 41 | Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward no. 41 (as per Specification No. IRS: S-30/64 & RDSO Drg. No. SA- 3376/M with latest Amendments) on both the doors, duly painted with red oxide.-Half Case as per Drg. No. SK- 783-1/2 & 2/2 with latest alteration. | Numbers | 10.00 | 16,415.71 | 1,64,157.1 |
| 42 | Supply of Double Walled Corrugated (DWC) pipe made up of High Density Poly Ethylene (HDPE) of size 103/103.5 mm inner dia and 120 mm outer dia in 6 Mtr straight length as p e r Britsh Standard No. BSEN 50086-1 and BSEN 50086-2-4 and BIS draft Specification Doc No. ETD 14(5071) and ETD 14(5072) along with one coupler per every 6 meters. | Metre | 90.00 | 543.3 | 48,897 |
| 43 | "Supply of GI pipe, inner dia. 100 mm dia., Medium class as per spec. No. IS 1239 PT.1/2004 with socket and fittings. | Metre | 90.00 | 1,013.53 | 91,217.7 |
| 44 | Supply of Earth Electrode assembly as per Drg. No. S&T/CON/KOTA/EARTHING/01 ALT - 01. All nut, Bolts & Lugs to be of stainless steel. The earth electrode pipe shall be 'B' Class/ Medium Grade as per Specification No. IS: 1239 Pt. 1/ 2004 of Nominal Inner Dia 50mm, Outside dia (Max 60.8 mm, Min 59.7 mm), Thickness (3.6mm), Tolerance in Thickness ('+' not limited, '-' 12.5 percent). | Numbers | 20.00 | 1,313.36 | 26,267.2 |
| 45 | Supply of Track feed Battery chargers, 110V AC as per specification No. IRS: S-89/2013 ver. 1.0 or latest. Chargers shall be of 10 Amp output capacity suitable for charging 80 AH battery and 2/ 3/ 4 no. of cells with potential free contact. | Numbers | 10.00 | 3,184.75 | 31,847.5 |
| 46 | Supply of adjustable Track Feed Resistance disc type 30 Ohm as per RDSO Drg. No. SA- 20161-66/M (Adv) with latest Amendment with phenolic moulded base. | Numbers | 10.00 | 1,783.39 | 17,833.9 |
| 47 | Supply of 'B' type 120 ohms impedence choke to specn. No. IRS.S.65/83 (Amndt-3) or latest. | Numbers | 10.00 | 5,074.05 | 50,740.5 |
| 48 | "Supply of Low Maintenance Lead Acid Secondary Cell 2V, 80 AH as per Specification IRS: S-88/2004 with latest amendments. Cells should be supplied with microporous vent plug cum sealed floats, lead coated inter cell connectors, lead coated brass nut bolts & washers in dry and uncharged condition." | Numbers | 30.00 | 2,757.9 | 82,737 |
| 49 | Supply of Relay, AC immune, Plug-in type, style QTA2 relay, DC Neutral track, Relay 9 Ohms, 2F/1B contacts, metal to carbon, complete with plug board, retaining clip and connectors conforming to BRS: 939A, BRS: 966 (Appendix F2) IRS: S-34 & IRS: S-23 as applicable. | Numbers | 10.00 | 6,800.31 | 68,003.1 |
| 50 | Supply of Track Lead Junction Box as per Drg. No. JBP/S&T/C/106/I & II made from fiber glass, along with terminal blocks & links. The TLJB should be BLACK in colour. | Numbers | 20.00 | 1,451.05 | 29,021 |
| Schedule total | ₹45,67,682.45 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderdocumentnew_compressed.pdf Tender documents
ATTACHMENT
COO-SIP.pdf
ATTACHMENT
PDZ-SIP.pdf
ATTACHMENT
Tenderdocumentnew_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .