Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC ITTIKUNNATH X 386 KOREPARAMBIL ROAD NJARACKAL ERNAKULAM 682505 | ERNAKULAM | ERNAKULAM | KERALA | 682505 | ₹9.7 L Quoted ₹10.4 L | L1 | Accepted-AOC Being Lowest Tenderer |
| 2 | L2₹10.6 L+₹17,755 (1.70%)Rejected-Finance 26 2579 THEVARA PO KOCHI ERNAKULAM KERALA 682013 | KOCHI | ERNAKULAM | KERALA | 682013 | ₹10.6 L+₹17,755 (1.70%) | L2 | Rejected-Finance Other than Lowest Tenderer |
| 3 | L3₹13.3 L+₹2.9 L (27.6%)Rejected-Finance 39 359 B PULICKAL THIRUVAMBADY POST ALAPPUZHA KERALA PIN 688 002 | ALAPPUZHA | ALAPPUZHA | KERALA | 688002 | ₹13.3 L+₹2.9 L (27.6%) | L3 | Rejected-Finance Other than Lowest Tenderer |
| Sl No | Description | Qty | Unit | AR Traders L2 | St George Engineering Works L3 | HIGH TECH ENGINEERS AND CO L1 |
|---|---|---|---|---|---|---|
| 1.00 | Disconnection of electrical wire from the ceiling rose and taking down the ceiling Fan of any capacity / type/size, make, dismantling the ceiling Fan for removing of old lubricating substance from bearing/bush and applying fresh lubrication using grease for noise free smooth functioning, including replacement of burning out / worn out copper winding, unserviceable spares as required and replacement of PVC insulated, unsheathed multi stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 0.5 M long including testing the repaired and ceiling fan to the entire satisfaction of engineer in charge and re-fixing the ceiling fan in own position with provision of hanging bush, cotter pins, nut , bolts washers etc. complete all as specified and as directed.
(Note : Rewinding of ceiling fan and PVC wire from making connection, spares etc. shall be measured and paid separately under respective item .) | 720 | Each Job | 200 ₹1,44,000 | 100 ₹72,000 | 80 ₹57,600 Lowest |
| 2.00 | Rewinding of the ceiling fan 230 volts of any capacity/ make/type and size (1200/1400 mm sweep) with existing same gauge copper wire winding and number of turns as to obtain the specified and satisfactory, RPM as per manufactures specification, including replacement of all insulation materials, varnishing, heating, drying, reassembling of starter/rotor complete all as specified and as directed.
Note : (Ceiling fan before fixing at site RPM shall be checked and match as per manufactures specification till entire satisfaction of Engr in charge) | 720 | Each Job | 475 ₹3,42,000 Lowest | 600 ₹4,32,000 | 550 ₹3,96,000 |
| 3.00 | Carrying out re-metalling in worn out shaft, cutting and polishing to make the shaft suitable for fixing of new ball bearing and replacement of bushing system in ceiling fan and assembling the same and testing to entirely satisfaction of Engineer in change (Note : Bearing shall be measured and paid separately ) | 300 | Each Job | 100 ₹30,000 | 80 ₹24,000 Lowest | 85 ₹25,500 |
| 4.00 | Supply only ball bearing of any capacity / size and type, suitable for any capacity type/make/size of ceiling fan for obtained from Srl item No.1 all as specified and as directed | 720 | Each | 80 ₹57,600 Lowest | 80 ₹57,600 Lowest | 100 ₹72,000 |
| 5.00 | Supply and fixing capacitor of capacity 2.5 MFD, 230 volt ISI marked all as specified and directed. | 720 | Each | 45 ₹32,400 Lowest | 60 ₹43,200 | 75 ₹54,000 |
| 6.00 | Supply and fixing PVC insulated, unsheathed multistranded twin twisted copper flexible cable of size 1.5 Sqmm all as specified and as directed | 300 | RM | 90 ₹27,000 | 20 ₹6,000 Lowest | 45 ₹13,500 |
| 7.00 | Supply only suitable size of copper bush for ceiling fan of any type/size obtained from Sl item No.1 all as specified and directed. | 400 | Each | 50 ₹20,000 Lowest | 120 ₹48,000 | 50 ₹20,000 Lowest |
| 8.00 | Supply and fixing of PVC connector 4 way 6 Amps with connection screws, nuts. etc complete, all as specified and as directed. | 257 | Each | 20 ₹5,140 | 60 ₹15,420 | 5 ₹1,285 Lowest |
| 9.00 | Supply and fixing PVC clamps with fixing screws for holding capacitor of any type and size, all as specified and as directed. | 230 | Each | 60 ₹13,800 | 70 ₹16,100 | 10 ₹2,300 Lowest |
| 10.00 | Supply and fixing Alloy Steel Heavy Duty "S" or "D"-Hook Hanger with double Fasteners M10 x 75mm for Hanging Ceiling fan instead of worn out hook, all as specified and as directed. | 20 | Each | 60 ₹1,200 Lowest | 280 ₹5,600 | 110 ₹2,200 |
Tender Value
₹14.3 L
EMD Value
₹28,500
Closing Date
24 Jul 2025, 6:00 pmClosed
GE FORT KOCHI
GARRISON ENGINEER MILITARY ENGINEER SERVICES GE FORT KOCHI -682 001
REPAIR/ MAINT OF CEILING FAN EXHAUST FAN AND CONNECTED ITEMS AT INS DRONACHARYA UNDER GE FORT KOCHI
2025_MES_716925_1
8229/E8_GE_FORT_KOCHI
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
FORT KOCHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE FORT KOCHI
₹28,500
Yes
29 Sept 2025
26 Jun 2025
31 Jul 2025
26 Jun 2025
24 Jul 2025
10 Jul 2025
Amount
Disconnection of electrical wire from the ceiling rose and taking down the ceiling Fan of any capacity / type/size, make, dismantling the ceiling Fan for removing of old lubricating substance from bearing/bush and applying fresh lubrication using grease for noise free smooth functioning, including replacement of burning out / worn out copper winding, unserviceable spares as required and replacement of PVC insulated, unsheathed multi stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 0.5 M long including testing the repaired and ceiling fan to the entire satisfaction of engineer in charge and re-fixing the ceiling fan in own position with provision of hanging bush, cotter pins, nut , bolts washers etc. complete all as specified and as directed. (Note : Rewinding of ceiling fan and PVC wire from making connection, spares etc. shall be measured and paid separately under respective item .)
Rewinding of the ceiling fan 230 volts of any capacity/ make/type and size (1200/1400 mm sweep) with existing same gauge copper wire winding and number of turns as to obtain the specified and satisfactory, RPM as per manufactures specification, including replacement of all insulation materials, varnishing, heating, drying, reassembling of starter/rotor complete all as specified and as directed. Note : (Ceiling fan before fixing at site RPM shall be checked and match as per manufactures specification till entire satisfaction of Engr in charge)
Carrying out re-metalling in worn out shaft, cutting and polishing to make the shaft suitable for fixing of new ball bearing and replacement of bushing system in ceiling fan and assembling the same and testing to entirely satisfaction of Engineer in change (Note : Bearing shall be measured and paid separately )
Supply only ball bearing of any capacity / size and type, suitable for any capacity type/make/size of ceiling fan for obtained from Srl item No.1 all as specified and as directed
Supply and fixing capacitor of capacity 2.5 MFD, 230 volt ISI marked all as specified and directed.
Supply and fixing PVC insulated, unsheathed multistranded twin twisted copper flexible cable of size 1.5 Sqmm all as specified and as directed
Supply only suitable size of copper bush for ceiling fan of any type/size obtained from Sl item No.1 all as specified and directed.
Supply and fixing of PVC connector 4 way 6 Amps with connection screws, nuts. etc complete, all as specified and as directed.
Supply and fixing PVC clamps with fixing screws for holding capacitor of any type and size, all as specified and as directed.
Supply and fixing Alloy Steel Heavy Duty "S" or "D"-Hook Hanger with double Fasteners M10 x 75mm for Hanging Ceiling fan instead of worn out hook, all as specified and as directed.
Supply and fixing in replacement of heavy duty Steel with rubber cushion for ceiling fan hook attachment clamp with fan rod nut bolt & locking pins complete set, all as specified and directed.
Supply and fixing ceiling fan blades of 1200/1400mm size of existing make including proper alignment and colour matching painting with existing ceiling fan all as specified and as directed.
Supply and fixing PVC canopy suitable for ceiling fan of any type/make for both end of down rod including fixing screws all as specified and as directed.
Supply and fixing ceiling fan down rod 45 cm to 1.0 mtr long, high durability powder coated heavy duty, suitable to fixing for ceiling fan of any type/make, including fixing screws as per site requirement all as specified and as directed.
Cleaning of ceiling fan assembly of any capacity type/size and carrying out two coat of spray painting with first quality synthetic enamelled paint of approved colour, including writing of MES number in black paint all as specified and as directed .
Supply and fixing switch piano, flush type, single pole, one way, 6 Amps ISI marked complete all as specified and as directed.
Supply and fixing stepped type electronic Fan regulator flush type suitable for existing ceiling fans fixed on phenolic laminated sheet etc. all as specified and as directed
Disconnection of electrical wire from the ceiling rose and taking down the exhaust fan of any capacity/type/size, make including dismantling the exhaust fan for removing of old lubricating substance from bearing/bush and applying fresh lubrication using grease for noise free smooth functioning, including replacement of burnt out/ worn out copper winding /unserviceable spares as required, replacement of PVC insulated, unsheathed multi stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 0.5 M long including testing the repair exhaust fan to the entire satisfaction of engineer in charge and re-fixing the exhaust fan in own position with provision of as per site requirement including nut , bolts washers etc complete all as specified and as directed. (Note : Rewinding of exhaust fan and PVC wire from making connection, spares etc. shall be measured and paid separately under respective item .)
Rewinding of exhaust fan up to 350 mm sweep 230 volts, of any make/type a with super enamelled copper wire of appropriate gauge and number of turns as existing to obtain the specified and satisfactory RPM as per manufacture’s specification, including replacement of all as per required worn out material, replacement of all insulation materials, varnishing, heating, drying, reassembling of exhaust fan and fitting, connection & testing complete, all as specified and as directed. Note : Exhaust fan before fix at site RPM should be checked and match as per manufactures specification till entirely satisfaction of Engr in charge
`-Ditto- all as per item No 19 above but 380 mm sweep complete all as specified and as directed
`-Ditto- all as per item No 19 above but 450 mm sweep complete all as specified and as directed
Supply and fixing exhaust fan blade of 300 to 450 mm size of existing Make including proper alignment matching with exhaust fan all as specified and as directed.
Supply and fixing of louver shutter made of MS sheet metal 1.2 mm thick for round base and 0.8 mm thick for flaps, comprising of mounting legs frames made o MS flat strips of size 25mm x 3mm including heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall after drilling, and duly painted by two coat of synthetic enamelled paint (spray painting) over a coat of primer for exhaust fan up to 300/380/450 mm sweep complete all as specified and as directed.
M&L for exhaust fan motor suitable for PVC body air freshener/exhaust fan up to 250 mm sweep and RPM match with existing including requirement of spare parts, taking down old motor, and fixing of new motor with proper alignment re-fixing the same using necessary mounting screws and accessories without any vibrations and noise, complete all as specified and as directed.
Supply and fixing PVC body air freshener/exhaust fan blade of 250 mm size of existing Make including proper alignment matching with exhaust fan all as specified and as directed.
Supply and fixing capacitor 230 volt AC 50 HZ 4.0 MFD, 220 volt ISI marked complete all as specified and as directed
Disconnection of electrical wire from wall mounted/pedestal fan and taking down wall mounted fan of any capacity/type/size/ make, dismantling the wall mounted fan for removing of old lubricating substance from bearing/bush & applying fresh lubrication using grease for noise free smooth functioning, including replacement of burnt out/ worn out copper winding and existing same gauge of copper wire winding/unserviceable spares as required and replacement of PVC insulated, unsheathed multi stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 0.5 M long including testing the repair wall mounted/pedestal fan to the entire satisfaction of engineer in charge and re-fixing the fan in own position with provision of hanging bush, cotter pins, nut , bolts washers etc complete, all as specified and as directed. (Note : Rewinding of ceiling fan and PVC wire for making connection, spares etc shall be measured and paid separately under respective item .)
Rewinding of wall mounted /pedestal fan 450 mm sweep 230 volts, of any make/type a with super enamelled copper wire of appropriate gauge and number of turns as existing to obtain the specified and satisfactory RPM as per manufacture’s specification, including replacement of all insulation materials, varnishing, heating, drying, reassembling of starter/rotor, connection & testing complete, all as specified and as directed. Note : Exhaust fan before fix at site RPM should be checked and match as per manufactures specification till entire satisfaction of Engr in charge
Supply and fixing wall mounted fan/ pedestal fan grill suitable for 450mm sweep fan including locking arrangement complete all as specified and as directed
Material and Labour for ceiling rose 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.
Material and Labour for point wiring in and including rigid non-metallic PVC casing and capping ISI marked of suitable dia, with 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes & 1.6mm thick duly painted inner & outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw, cup washer & including PVC insulated & unsheathed stranded copper conductor of 1.5 Sqmm as continuous earth wire complete for one fan point by one switch and regulator including taking down existing point wiring.
AR Traders (BID ID -3353757)
St George Engineering Works (BID ID -3362069)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .