Repair/ Replacement of sewage line, connected work, hard standing, drain, path and other misc B/R work under AGE B/R-II of GE Dehradun.

Amount

Demolition of cement concrete(unreinforced) in ground floor and paving n.exc 15cm below or above ground level, including revoming of rubbish of the premices complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling & mass concrete, sub base complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor topping of hard standing finished even and smooth without using extra cement (PCC shall be laid in alternate bays in panels of size as directed by Engineer-in-charge.

M&L for forming 10mm wide construction joints 30mm deep filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'A' all as specified and directed by Engineer-in-charge.

M&L factory made prepolished rubber moulded vibromatic Chequred cement concrete tiles of size 30cmx30cmx22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and colour pigment to match the shade of tile, laid over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed.

M&L for Machine pressed any tint prepolished precast concrete factory made interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and direceted Make : Nitco/NTC.

M&L for Sand filling 25mm thick under floors or in foundations including watering and consolidation under interlocking tiles sand cushion complete all as specified and directed.

M&L for complete removal of existing treatment of concrete surface of any description over 10cm girth or width, applying two coats of synthetic enamel (ordinary tint) over a coat of priming paints plaster coat including making the surface of concrete smooth with paint putty complete all as specified in SSR Part- I.

M&L for prepration of surfaces with washing, rubbing and applying two coat of synthetic enamel paint high class reflective type using glass beads in any colour complete all as specified by Engr-in-Charge.

Excavation in trenches n.exc 1.5m Deep and n.exc 1.5m wide in soft/loose soil complete all as specified and directed.

Surface excavation n exc 30cm deep and averaging 15 cm deep in any type of soil and getting out complete all as specified and directed.

Removing excavated material (Soils) to a distance n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

M&L for returning filling in, any type of soil including spreading levelling watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles and rubbish off the permises as directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per serial item No 16.00 here in above but except bricks.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) Complete all as specified and as directed by the Engineer-in-charge.

All as per Item No 18.00 all as per here in above but except stones. complete all as specified and as directed by the Engineer-in-charge.

M&L raking out joints/pointing in cement mortar to to random rubble or polygonal rubble uncoursed or brought up to courses stone masonry built in cement mortar of any description. Complete all as specified and as directed by the Engineer-in-charge.(Note:-The rates include for raking or cutting out joints and decayed mortar etc, not less than 12mm deep, washing the joints, removing rubbish off the premises, and keeping the surface to be pointed wet for 2 days prior to re-pointing)

M&L for raised pointing in cement mortar 1:4 to random rubble, uncoursed stone masonry or brought upto courses of any description Complete all as specified and as directed by the Engineer-in-charge.

M&L for flush pointing in cement mortar 1:4 to random rubble, uncoursed stone masonry or brought upto courses of any description Complete all as specified and as directed by the Engineer-in-charge.

Taking down of cement or cement lime plaster/tile work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc and rubbish off the permises as directed.

M & L for rendering 15mm thick on cement mortar (1:4) finished fair faces of brick/concrete surfaces and finish even and smooth without using extra cement complete all as specified and directed.

M & L rendering in foul conditions in manholes15mm thick on cement mortar (1:3) finished with cement slurry fair faces of brick /concrete surfaces even and smooth with using extra cement including cleaning of manholes before plastering complete all as specified and directed .

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls complete all as specified & directed by Engineer-in-Charge

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition and rubbish off the permises complete all as specified and directed

M&L 60mm for reinforced precast cement concrete 1:1:2 (using 20mm graded stone aggregate) as in , cover slabs ( for manholes etc.) vibromatic, with plain faces (Top surface chequred finish) and necessary form work with 1.25mm thick CR sheet painted with bituminous paint around the manhole cover and two nos PVC counter sunk handle 12mm dia to surface, complete all as specified and directed. (Note : CA No and date will be engraved on slab. Reinforcement shall be measured and paid seperately).

S&F for mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for and rubbish off the permises as directed.

M & L for cement concrete ( 1:3:6 ) type C-2 (using 20 mm graded crushed stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed (Note : Forming fair finished channel for drain using extra cement will be measured and paid for separately).

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc

M&L for providing cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork all as directed by Engineer-in-charge.

Dismantling structural steel work including doors, gates any description complete all as specified and directed.

S & F Framed work such as grills, gratings , Iron Chowkhats etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toFe 290. Gde-E-165 complete all as specified and directed .

S&F in repair 1.25 mm thick mild steel plain black sheet in covering to door shutters covering to door chowkhats, water troughs, urinal troughs and funnels and the like complete all as specified and directed by Engr-in-Charge.

Dismantling of post or struts any type and any section including barbed wire and chain link fencing taking out embeded portaion and making good distrubed ground and rubbish off the permises complete all as specified and directed.

S&F mild steel work such as in angle iron, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc. including all necessary cuttings, drilling, bolting or riveting etc and including 10mm mild steel bars as in tie bars fixed to fencing posts including necessary welding where required, as per site requirement and other similar works complete, conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for painting to new or previously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

Cleaning of kerb stone by sand paper and washing rubbing with water and final painting with two coat of synthetic enamel paint complete all as specified and directed

M&L centre line marking paint with preparation of surface and applying two cat of retro reflecting paint in any tint complete all as specified and directed.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

Restraining resecuring including making good staples etc galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

Taking out old damaged SGSW pipes from existing lines including necessary excavation in trenches and getting out in any type of soil, supply, laying and jointing of new SGSW pipe type 'A' 150mm dia in any length including packing under and haunching against the sides of pipes in PCC ( 1:4:8) type D-2 and returning, filling in disposal of surplus soil to a distance n exc 50m complete all as specified and directed by the Engr-in-Charge..

Cutting into existing Manhole for removing existing branch drain pipes, making good to brick wall and rendering, cutting out branch channel and making good in cement concrete (1:2:4) (20mm graded crushed stone aggregate) and reforming benching for 150mm internal dia drain pipe in foul condition, complete all as specified and as directed.

M&Lfor salt glazed stone ware gully traps square or rounded mouthed type ‘P’ of size 150x150mm embedded in PCC with necessary brick work . plastering etc complete and connecting to pipe all as directed by Engineer-in-charge.

Taking down of AC or PVC/ CI pipe jointed in CM of any dia bore complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) bend 110 mm dia, any radius as required complete all as specified & directed.

S&F in repair PVC (SWR) bend 75 mm dia, any radius as required complete all as specified & directed.

S&F in repair PVC (SWR) branch pieces, single (single Y) equal or unequal of 110 mm dia, complete all as specified & directed.

S&F in repair PVC (SWR) branch pieces, single (single Y) equal or unequal of 75 mm dia, complete all as specified & directed.

S&F in repair PVC (SWR) vent cowl, of 100 mm dia, complete all as specified & directed.

S&F in repair PVC (SWR) vent cowl, of 75 mm dia, complete all as specified & directed.

S&F reinforced cement concrete pipes 300mm dia class NP 3 laid and jointed complete with collars including necessary excavation/demolition/cutting of road, returning filling & removing excavated soil n. exc 50 RM and making good surface complete all as specified & directed.

S&F reinforced cement concrete pipes 450mm dia class NP 3 laid and jointed complete with collars including necessary excavation/demolition/cutting of road, returning filling & removing excavated soil n. exc 50 RM and making good surface complete all as specified & directed.

M&L for cleaning of existing seawage pipe lines 100mm/150mm/200mm internal dia at any depth inciuding manholes by removing the manhole covers of any type / size and cleaning by means of hydraulic jet pressure machine manually as requierd at site from manholes and well flushing with water after cleaning including getting out sudge if any and liquid materals from connecting manholes deposited in sewar line removing the solids and sludge to any distance and reinstating the manhole cover to its oiginal postion (cost of removal of sludge/liquid material from sewage lines and manholes in same line is incl. in rate of this item and rate quoted also includes for keeping particular sewage line which is undertaken once for cleaning, functional for full contract period) complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with wsher and one hexagonal or square nut exc 5 cm but not exc 22.50 cm long, diameter of neck n exc 12 mm complete all as specified and directed.

Supply only Chain link MS galvanised wire 3 mm fencing of size 100x100 or type weight n. exc 4 kg per square meter as approved by Engr-in-Charge.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wire any size or type weight n.exc 4 kg per Sqm as approved by Engineer-in-Charge.

M&L for removing the manholes covers (CI or RCC) any type of manholes rectangular/circular and de-sluding /de-watering of septic tank and soakage well of any size and depth by mechanical pumping by plugging inlet as requried ( 5000 ltr capacity) of out of MD land and making it fully functional to the entire satisfaction of Engr -In- Charge including carrying the effluent and re-instating the manholes cover to its original postion complete all as spd and directed by Engr-In Charge.(The quoted rate includes for keeping the particular septic tank and soakage well undertaken once for de-sludging/de-watering functional for full contract period)

M&L for cleaning the blockage of bathroom/ kitchen by cleaning the Nahani traps/gully traps of all the mud/sludge and getting out, washing thoroughly grating of tarp, CI waste pipes by opening the clearang eyes and deposting the sludge in a pit of suitable size at a distance not exceeding 50 meters form the gully trap and and covering the same with the soil obtained from excavation of pit including all excavations and earthwork complete all as spd and directede by Engr -in- Charge. (the quoted rate includes for keeping particular bathroom/kitchen undertaken once for cleaning functional for full contract period)

M&L for Cleaning of blockage of WC indian or European type by removing of all the mud/ sludge and getting out including cleaning of SGSW or CI pipe upto First manhole and deposting the sludge in a pit of suitable size at a distance n' exc 50 meters from the wc and covering the same with the soil obtained from excavation of pit including all excavations and earth work complete all as spd and directed by Enge-In -Charge. (The quoted rate includes for keeping particular WC under taken once for cleaning, functional for full contract period)

Cleaning of manholes any depth and removing the sludge and burying the waste material in borrow pits and refexing the maholes covers properly complete all as specified and directed (Note:-cost of the borrow pit shall be deemed to be included in the quoted rates of this item).

Notes (a) Contractor's representative shall attend office of Engr-in-Charge on all working days at 0900 hrs to collect the complaints pertaining to blockage of traps, cleaning of sewage lines, manholes, septic tank and soak wells . In case contractor's representative fails to report Rs 450/- per day will be deducted from the contractor payment for the absent period. (b) complaint slips shall be deposited to the JE concerned after completion of job duly singed by the users. payment shall be made on the basis of complaint slips and site verification by JE/ Engr-in-Charge. (c) Contractor shall provide printed complaint register/ slip as per format given by Engr-in-Charge before commencement of work.

Alankar Traders

M.K Engineers

M/S RR ENGINEERING CO

MOHAN LAL GUPTA

M/s RP AGRAWAL

M/S P K ARORA

M/s Pradeep Kumar