SPL REPAIR BLDG NO T- 815 AND PROVN OF PARKING SHED WITH HARDSTANDING FOR 04 X LT VEHS NEAR ADM BLOCK OF FD REGT AND PROVN OF PVC DOOR AND TILING IN OR BATHING POINT IN ZONE R AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridges complete all as specified and as directed

Dismantling boarding any description fixed in any position fixed with nails as in eaves board complete all as specified and directed

Demolition of brick work, built in cement mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description and any places complete all as directed

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises.

Taking down chowkats or frames but with shutters (without taking off shutters from the frames) n.exc 2 sqm each.

M & L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

S&F Fe-410-W(Gde-E-250) quality-B roof trusses (framed), trussed purlins, crane gantries,rails and fastenings and heavy bracket framing (beam,tee,angle,chanel or flat sections) including distance pueces, cleats etc.

S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grained printed PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick with particle board coare, 28 to 30mm thick (stiles) 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face as per specification and drawing

M&L mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290. Gde-165

S&F 100mm size type B-21. Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section.

Cutting holes in to brick wall for inserting bold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe one brick.

Supply & Fix in repairs vitreous china squatting pan " Orissa Pattern" size 580 x 440 mm white with integral foot rest including provision of lime concrete bedding (excluding flushing cistern and flush pipe)

S&F in repairs 10 Ltr capacity PVC valveless, syphonic action type Flushing Cistern, low level white with inlet ball valve float & handle including brackets & connection to pipes

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs.

Supply and fix in repairs brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union

S&F CP Soap dish complete all as specified and directed.

S&F pvc connector 15mm size with PTMT nuts of length 600mm .

S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes.

S&F in repairs 15mm bore stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F 15 mm angular stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed .

Supply and fix 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound

M & L for one coat of cement base paint over old decorated plastered surfaces after preparing the old surfaces .

M & L for one coat of whitewash on old surfaces after preparing the old surfaces .

M&L for two coats of synthetic enamelled paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces.

M & L for Painting in wooden surfaces with two coats synthetic enamel paint over a coat of pink primer incl preprations of new painted surfaces over 10 cm width or girth.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.06sqm but not exc 0.11sqm in floors, set & jointed in neat cement slurry & pointed with white/coloured cement to match over and including 15 mm thick screed bed of cement mortar 1:4 complete all as specified.

Material & Labour glazed ceramic coloured tiles 350 x 250 x 7 mm/450x350x7mm thick on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including 10 mm thick screed bed of cement mortar 1:4 complete all as specified.

M&L 15mm thick rendering in cm (1:4) on concrete surfaces with integral water proofing compound @ 3% by wt of cement,(Water compound measured & paid separately) finished even and fair.

Supply only integral water proofing compound

M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4

Material and labour PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection 75 mm thick finished fair and even w/o using extra cement.

Material and labour PCC 1:3:6 type C2 using 40 mm graded aggregate as in surface channel/drain complete all as specified and directed.

Material and labour Extra for form fair finished drain on channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred stoped end etc complete all as specified and directed.

Add or deduct for each 25mm girth or part therof over or under 30 cm ditto

S&F 2nd class Hard wood 20 mm thick boarding planed both side with butt joints fixed with nails in any situation

Material & Labour for writing letters or figures (block, Roman, Italic or Indian) n.exc.30 cm high complete all as specified and directed.

M&L for Excavating in post holes ( or similar holes ) each n exc 1.5 cum, getting out soft loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.

Surface excavation n.exc 30cm deep and avaraging 15cm deep and getting out in soft/loose.

M & L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete.

M & L for cement concrete (1:3:6) Type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete

M and L for 75mm thick Cement concrete type B- 2, 1:2:4 (40mm graded) as in floor finishes

Material and labour for brick work with locally available sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.

Excavation in trenches n.exc 1.5 M wide and n.exc 1.5m deep as in soft/loose soil for foundation etc or for shaft walls, cesspit, manhole etc n.exc 10Sqm on plan

M & L returning, filling including spreading, levelling and well ramming in layers not exceeding 25 cm in each layer as in soft / loose soil complete.

M & L removing excavated material exc 250 Mtrs but n exc 500 Mtrs and depositing where directed by Engineer-in-Charge.

M&L for 15 mm thick rendering in CM 1:4 in finishing the surface even and smooth without using extra cement.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L roof trusses framed, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, angle, channel or flat sections Fe-410W) including distance pieces, cleats etc.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade, laid over 50mm thick sand cushion ,with gray cement and pigment all as spd and directed by Engineer-in-charge.

M & L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones(20cm x30cm x6cm), bed plates, kerbs stone(20cm x30cm x6cm) not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M & L for machine cut kota stone slab flooring 20-25mm thick , laid over 20mm thick cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

S&F 125mm size MS butt hinges, medium weight cold rolled mild steel.

Schedule'A' Part-I: E & M works

Taking down carefully to existing copper/Aluminum point wiring (light,socket or power) complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified.

M & L Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cable of size 1.5sqmm as continous earth wire connected to common earth and earth dolly complete all as specified.

One light / Fan / Bell point controlled by one way switch 6 Amp .

One 3 pin socket outlet 5 Amps on the same board with other switches

One 3 pin 5 Amp socket out let controlled by one switch on independent board

M & L Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 4 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 16 Amps, 240 Volts complete all as specified & directed.

Supply and fixing socket outlet 2 in 1, 3 pin, 6 Amp piano complete all as specified & directed.

Supply and fixing socket outlet, 2 in 1, 3 pin 16/15 Amp, piano flush type complete all as specified & directed.

Material & labour for lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

Supply and fixing LED Building security light fitting 35 Watt230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection complet, One GI medium grade 20mm dia bracket of total length 50 cm all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete., 4 feet long , all as specified and directed.

Supply and fixing LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete..

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. all as specified and directed.

Supply and fixing MCB, single pole 'B' series having braking capacity 10 KA, 6 to 32 Amp, 240 volts, and sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 2 way, 240 Volt .

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details.

SHRI SUBRATA GUHA

SUMAN DEB

SHRI RAJESH DEY

M/S C.S.P. ENTERPRISE

Pranjit kar

M/s Amrit Gope