Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹9.2 L
EMD Value
₹18,481
Closing Date
28 Oct 2026, 6:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER, PWD, COOCH BEHAR
EXECUTIVE ENGINEER, PWD, COOCHBEHARDIVISION, SUNITY ROAD, COOCH BEHAR, PIN- 736101
Annual Maintenance by repair and renovation of Civil , Sanitary and Plumbing works of Mathabhanga Sub Divisional Hospital ( Non Residential and Residential )at Mathabhanga under Cooch Behar Division PWD in Cooch Behar District.
2026_WBPWD_5078929_3
WBPWD/EE/COB_DIVN/NIT_29/26_27
Open Tender
CIVIL WORKS
Percentage
365 days
Cooch Behar
Please refer Tender documents.
5 documents required · 5 mandatory
₹18,481
Yes
14 Oct 2026
14 Oct 2026
31 Oct 2026
14 Oct 2026
28 Oct 2026
14 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 350 | Sqm | 54.65 | ₹19,127.5 |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
15.12.1- Of area 3 sq. metres and below | 20 | Nos | 367.2 | ₹7,344 |
| 3 | CEMENT PLASTER (IN FINE SAND)
15 mm cement plaster on the rough side of single or half brick wall of mix :
13.2.1 - 1:4 (1 cement: 4 fine sand) | 160 | Sqm | 399.45 | ₹63,912 |
| 3.01 | CEMENT PLASTER (IN FINE SAND)
20 mm cement plaster of mix :
13.3.1-1:4 (1 cement: 4 fine sand) | 160 | Sqm | 471.35 | ₹75,416 |
| 3.02 | CEMENT PLASTER (IN FINE SAND)
12 mm cement plaster of mix :
13.1.1 - 1:4 (1 cement: 4 fine sand) | 30 | Sqm | 347.05 | ₹10,411.5 |
| 4 | Colour washing such as green, blue or buff to give an even shade :
13.39.2 - New work (two or more coats) with a base coat of whiting | 350 | Sqm | 52.75 | ₹18,462.5 |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
6.13.2 - Cement mortar 1:4 (1 cement :4 coarse sand | 15 | Sqm | 1,123.8 | ₹16,857 |
| 6 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
9.1.2 - Sal wood | 0.05 | Cum | 1,16,520.3 | ₹5,826.02 |
| 7 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)
9.5.3 - Kiln seasoned selected planks of sheesham wood
9.5.3.1 - 35 mm thick shutters | 7.2 | Sqm | 3,638.35 | ₹26,196.12 |
| 8 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
21.1.2 - For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
21.1.2.1 - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 145.67 | Kg | 598.6 | ₹87,198.06 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.14 MB
WBF_2911.pdf
Tender Documents • 0.77 MB
BOQ_5184927.xls
BOQ • 0.59 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .