NABARD-NFH-RIDF-XXVI-Providing additional Facilities and Renovation of existing structures at Neendakara Fishing Harbour parking Area Phase IV-General Civil work

Amount

Appendix-A-Surface clearing and Providing Grill for resting shed

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

OD9499/2024-2025:Providing Name board of size 20 feet X 4 feet fish model or other model Specified by the Departmental officers at Site using Aluminium composite pannel (ACP)and metal framefor lighting and back covering(box type) also metal frame and ACP box type Board on both sides at an average height 6.00m on Both side including Acryllic lettering , Cost of material , Design Charges, Concrete setting Charge, Tranportation etc.(Rate sanctioned for the work " NABARD RIDF XXVI -Providing Additional Facilities and Maintenance of Existing Structures at Neendakara Fishing Harbour-Construction Rest Room cum Toilet Facilities and Maintenance of Existing Structures" vide TS No. 211/2021-22 Dated 15-10-2021")

13.71:Lettering with black Japan pint of approved brand and manufacture

8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

16.21:Engraving letters in hard stone

OD10105/2024-2025:Providing ACP Board with Sticker Work

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Appendix B-GSB Filling

4.11.2:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. <br>(ii) Using Gravel mix soil.

11.4.3.1:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203<br>III. P.C.C. grade M 20 (i) Nominal mix (1:2:4)

Appendix-C-Providing Interlock

55.23:Supplying and laying interlocking tile 80mm or nearest size thickness, minimum strength M30 including providing a layer of 6mm aggregate for 5cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc. complete.

55.13:Providing and fixing modular rubber speed hump<br>Providing and fixing modular rubber speed hump of approved brand of width 38 cm and height 5cm above finished road surface, including retro reflective reflectors, fixed with bolts & adhesives including fixing charges,site preparation etc complete as per manufactures specifications.

Bidder Name

Panmana Labour Contract Co-operative Society