Local Area Plan for De Congestion of Urkund Eranna Slum and Shifting of Slaughterhouse from the Slum Area in Raichur City Corporation Raichur

Local Area Plan for De Congestion of Urkund Eranna Slum and Shifting of Slaughterhouse from the Slum Area in Raichur City Corporation Raichur

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth up to 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution l...

Earth work excavation for Foundation by mechanical means for all works & depth up to 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution l...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges up to 3.50 m height. The granite/tr...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)-

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/welding joints, tyi...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges up to 3.50 m height. The granite/tr...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges up to 3.50 m height. The granite/tr...

Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges up to 3.50 m height. The granite /tr...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/Cum and minimum compressive strength of 4.00 N/mSqm conforming to IS...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/Cum and minimum compressive strength of 4.00 N/mSqm conforming to IS...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/Cum and minimum compressive strength of 4.00 N/mSqm conforming to IS...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Clerestory windows & other Frames/ Chow khat comprising of virgin PVC polymer of K value 58-60 (Suspe...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elast...

Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbent single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size compris...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/Sqm width, along route of walls chipped for...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with p...

Providing and laying 5mm thick Self levelling Epoxy Flooring for Residential, Commercial, Sports & Industrial purpose made of reputed brand applied at 1L/Sqm on existing Concrete substrate of 25Mpa or...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...

Providing and fixing ion wall face unplasticized Rigid PVC rain water pipes confirming to IS :13592 Type A, including jointing with seal ring confirming to IS:5382, leaving 10mm gap for thermal expans...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 g/m² as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...

KSRB 12-6.2: Providing 20mm round M.S. footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous China pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous China flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

Providing and fixing 100 mm sand cast Iron grating for gully trap. Sl.No 14.29, Page No.136, Volume-II.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Sl.No 13.15, Page No.119, Volume-II

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. Sl.No 13.13, Page No.119, Volume-II

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II25 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II32 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II-40 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II-50 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II-65 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II-80 mm nominal bore

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comple...

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Sl.No 14.40.2, Page No.137, Volume-II

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (15 mm diameter)

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

Providing PVC ring tite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...

Providing PVC ring tite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings inc...

Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings inc...

Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings inc...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and constructing “WIRE CUT BRICK MACHINE HOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approv...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

RCC DP structure using 9 Mts RCC poles with 145 WL

11 KV, 5 KN polymetric indulators (24 mm dia FRP rod)

Anticlimbing devices With barbed wire

11KV Dolo control(set /3 nos)

Fixing of guyset

Concreting materialsfor guyset with sand

Fixing of spirial earth electrodes

Fixing of caution/danger board

Erection of 400 Amps ouble break Gos

Fixing of 11Kv lightining arrester

Fixing of D.O.L.O. cutouts (Set/3 Nos)

Painting of 9mts RCC of DP structures Poles

RCC Pole 9 mts long 145 Kg W.L

Horizontal Cross arms with clamps,HTST supports,bolt,nuts and washers for RCC poles

11 KV,5KN polymetric Pin indulators (24 mm dia FRP ROD)

70/90 KN polymeric disc insulators

Strain Clamps 3 bolt type for disc insulator

DP structure with 9 mts RCC poles

P.G Clamps for coyote Conductor

Spiral earth electrodes

EG Stirrups with GI wire lacing (set / 2NOs)

caution/danger boards

Guarding materials for road crossings with 4 pin cross arms,Bolt,nut and washers

11KV 400A D/B GOS

11KV Lighting Arresters , metal oxide 9KV 5KN Polymeric type with ground connector

Earthing materials pipe type for grounding

Erection of 9mts RCC poles

Fixing of Horizontal cross arms

Fixing of EG stirrups with GI wire

Fixing of guardings for Road crossings

Erection of 8 mts RCC poles for stud with 2 Nos of 2 pin cross arms

erection of 400A D/B Gos

erection of H frame for mounting GOS

Providing earthings

Guyset Concreting with boulders mud & sand

Painting of 9Mts RCC poles

Horizontal Cross arms with clamps,HTST supports,bolt,nuts and washers for RCC poles

11 KV, horizontal cross arms , clamps, bolts nuts and washers

Strain Clamps 3 Bolted for disc insulator

Guyset complete with 15 strain insulator and concreting materials.

Coyote ACSR conductor with 1.5% sag

Coyote conductor accessaries at 3% on above

11KV 200A D/B GOS

H Frame for founting GOS

LT 4 Pin Cross Arms with pole clamps ,bolt ,nuts and washer for RCC Poles

LT 2 Pin cross Arms with pole clamps , bolt , nut & washers for RCC poles

1.1 KV Pin Insulators with GI pins

No 8 strain insulators

Rabbit ACSR conductor with 1.5% sag

Rabbit conductor accessories at 3% on above

LED street lights fittings with 40 Watts

guardings between HT & LT Lines using 4 pin cross arms

Supplying and fixing GI bracket up to 2 mtr long

Fixing of 11 Kv Horizontal cross arms for DC lines

Erection of RCC DP Structure,9mts Long

Stringing of coyote ACSR conductor

Providing Anti climbing devices

8 mts long RCC poles for stud with 2 Nos of 2 pin cross arms with bolt,nut an washers

Erection of 200A SB Gos

Fixing of 4 Pin cross Arms

Fixing of 2 Pin cross Arms

Stringing of rabbitACSR conductor

fixing of Led Street Lights of 40 Watts

Concreting materials for 9 mts/8 mts RCC poles Base concerting 1:4:8, 500 x 650 x 150 mm

Concreting materials for 9 mts/8 mts RCC poles Cople concreting in CC 1:2:4 650 X 500 700mm

Concreting materials for 9 mts/8 mts RCC poles Pole coping in CC 1:2:4 and as per actnals 150mm alround the pole for an height of 300mm

Fabricating supplying and creating swages tubular pole of height 9Mts having three sections and Providing two coats of red oxide paint and time shed with two coat of enameled paint of approved qualit...

Supplying and timing telescopic M.S bracket fabricated by using 0.5mts ,4”dia telescopic MS pipe with 2”dia 1.5m long MS bracket and are welded with suitable angle using 6mm thick ms sheet grip ...

Supply and fixing of LED stretch Height fitting with 120watts

Supplying of 1.1kv LTUG cable XLPE or heat resistant PVC insulated PVC extruded inner sheets armor red UGLT cable as per IS-1564 3.5C*25Sq mm

Labour charges for laying of 1.1KV class UG cable in existing trench/GI pipe /stone ware pipe/on wall/on pole as required.3.5C*25Sqmm cable.

Digging of trench of 0.6mtr deep*0.5m wide, retiling the trench to the required ground level and consolidating cte complete in an ordinary soil.

Supplying and fixing LT cost cron pot heads suitable for 1.1 kv class LIG cable filled with necessary bitumen /insulating compound complete with terminals clamps, bolt, nut and washers ect.25sqmm ca...

Supplying and fixing of class “A”(medium duty)GI pipe of wall thick not less than 3.25 mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1kv class .40mm

Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing martials for PVC sheathed steel tape wire armon red aluminum conductor 4core cable of 1.1Kv g...

Supply and fixing heavy duty cable glands suitable for UG cable of 1.1KV class (metal only) 32mm Dia.

Supply and wrapping the conductor with camabrick tape soil.

Supplying tinned coppering and crimping and wiring to terminal point for wires of 25 sq mm long barrel.

Wiring to street light circuit using 4 sq.mm FRLS PVC insulated 1100 volte grade and copper wire with low conductor , resistance single core in open or concealed system of wiring with specified IS-...

Supplying and fixing microprocessor based electronic timer switch.

Supplying and fixing outdoor type there plastic model or panel enclosure with transparent polycarbonate lid shock proof IP-65 (weatherproof)rust proof , dust proof, water proof, corrosion proof, havin...

Supplying and fixing miniature grunt breaker on existing panel board using necessary fixing materials and “C” curve indicator on/off entry cross 3 with short circuit dredging capacity of10k and c...

Supplying fixing and wiring electronic trimester meter (ETV)5.63amps three phase 4wire whole current class I accuracy energy meter.

Supplying fixing and wiring cable electronic for ground of energy meter panel using 40mm dia,2.9mm tick GI pipe 2.5mts long buried in a pit. The pit should be filling with equal portion of salt and ch...

Supplying and running GI conductor for Ground of using necessary suitable size clamps, nails , gutters/spacers ect. 8.5SWG GI wire

Fabrication, Supplying, Erection, Testing and Commissioning of 20Mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) t...

Supply & Fixing of foundation bolts manufactured out of special steel along with bolts , nuts & washers and another plates templates etc

design & casting of suitable foundation for high mast condensing the safe soil bearing capacity at the site at least 10 ton per square mtr at the depth of 2 mtr, the work shall be carried out as per s...

SITC of 1000 x 2000 x 400 mount door panels fabricated out of 18 swg MS sheet with 50 x 50 x 6 mm angle TPN MCB pilot lamp set selector swich 2 nos electronic mechanical timer suitable capacity CTS co...

Supplying and fixing of heavy duty cable glands suitable forUG cable of 1.1 KV class (metal only) 45 mm dia

Supplying fixing and wiring earth electrode for grounding of panelsete. using 40mm dia 2.9mm thick 2.5 mtr long Gl pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth...

Supplying and running of Gl/Copper strips for grounding connections, using necessary fixing materials as required 25 x 6 mm

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 50 mm

8 mts Long RCC poles for stand with 2 Nos of 2 pin cross arms with bolt,nut an washers