Construction of G+3 Hostel Building at Porbandar District Sports Complex. (2nd Attempt)

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth Rupees TwentyEight Thousand

1 0.47 up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical 28,455.09 Four Hundred FiftyFive Paise Hec

means in area of light jungle Nine Only

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm

Rupees Seven Hundred

2 585.48 diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the 734.19 Sqm

ThirtyFour Paise Nineteen Only

cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. Rupees One Thousand One

3 50.00 (i) R.C.C. Work 1,133.89 Hundred ThirtyThree Paise Cum

EightyNine Only

Dismentling steel work including distempering and stacking the materials with all lead and lift.

4 2000.00 4.03 Rupees Four Paise Three Only Kg

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off Rupees One Hundred

5 5412.64 the excavated stuff upto 50 Meter lead. All kinds of soil 128.79 TwentyEight Paise SeventyNine Cum

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and

Rupees Six Hundred EightyTwo

6 1709.07 disposing off the excavated stuff upto 50 Meter lead. (E) Hard Rock 682.27 Cum

Paise TwentySeven Only

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful materials and Rupees Seven Hundred Seven

disposing off the excavated stuff upto 50 Meter lead. (E) Hard Rock Paise Eighteen Only

Extra for additional depth more than 5.0 m for excavation for foundation including sorting out and stacking of

Rupees Seven Hundred

8 61.14 useful materials and disposing of the excavated stuff upto 50 m lead.(E) Hard Rock 747.16 Cum

FourtySeven Paise Sixteen Only

Disposing off the surplus excavated stuff (Earth) for lead 5 K m as directed by engineer in charge. (A) lime murrum Rupees One Hundred Three

building rubbish earth manure or sludge & execavated rock and rubbish [Earth] Paise TwentySix Only

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. In layers not Rupees One Hundred

10 5575.13 exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 137.47 ThirtySeven Paise FourtySeven Cum

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete

Rupees Four Hundred NinetySix

Paise SeventySeven Only

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering,

Rupees Three Hundred Seven

12 3587.28 ramming and consolidating etc. complete. 307.41 Cum

Paise FourtyOne Only

Providing and laying rubble soiling, in a compact manner, foudation, road, footpath etc. using 200 to 230 mm. cut

size stones, covering and levelling the surface with a layer of murrum after filling the voids with smaller sized

Rupees One Thousand SixtyTwo

13 299.93 stones or stone chips, including watering, ramming well and consolidating each layer, As per drawings and design 1,062.77 Cum

Paise SeventySeven Only

supplied by architect and instruction given by E.I.C.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by mass) is recommended Rupees NinetyOne Paise

10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of surface is recommended as per SixtyThree Only

Providing and filling with good quality sinder (steam coal) as directed by engineer in charge in sunks in layers of

Rupees Eight Hundred ThirtySix

15 24.00 cm thk, including watering, placing, ramming well etc. as directed. 836.28 Cum

Paise TwentyEight Only

P.C.C : Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

Rupees Four Thousand

16 533.78 nominal size) and curing complete including cost of formwork in (A) Foundation and Plinth 4,022.06 Cum

TwentyTwo Paise Six Only

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

Rupees Five Thousand One

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of

17 600.11 5,185.57 Hundred EightyFive Paise Cum

reinforcement for reinforced concrete work in M250 all RCC element like foundation, (A) Footing, at all floor level

FiftySeven Only

from below plinth and above plinth level

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

Rupees Seven Thousand

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of

18 229.72 7,043.59 FourtyThree Paise FiftyNine Cum

reinforcement for reinforced concrete work in M250 all RCC element like,

(B) Walls, from top of foundation level all floor level

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

Rupees Six Thousand Seven

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of

19 982.90 6,777.59 Hundred SeventySeven Paise Cum

reinforcement for reinforced concrete work in M250 all RCC element lik, © Slabs, landing, shelves, Balconies,

Girders and Cantilever all floor level.

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

Rupees Six Thousand Five

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of

20 892.94 6,506.82 Hundred Six Paise EightyTwo Cum

reinforcement for reinforced concrete work in M250 all RCC element lik © Slabs, landing, shelves, Balconies,

Lintels, Beams, Girders and Cantilever all floor level.

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of Rupees Seven Thousand Five

21 232.86 reinforcement for reinforced concrete work in M250 all RCC element lik © Landing, Stair case, Lintels, Copping, 7,513.39 Hundred Thirteen Paise Cum

Beams, Girders, shelves,Balconies, and Cantilever all floor level. ThirtyNine Only

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

Rupees Six Thousand One

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of

22 322.09 6,141.53 Hundred FourtyOne Paise Cum

reinforcement for reinforced concrete work in M250 all RCC element lik (D) Columns, Pillars posts and struts, all

FiftyThree Only

GRADE SLAB (M200) : Providing and laying controlled cement concrete M.200 Concrete with all lead, including all

transportation, pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding Rupees Five Thousand SixtyOne

the cost of reinforcement for reinforced concrete work in M200 Grade Slab Paise Sixteen Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

TRIMIX Road (M200) : Providing & Laying M200 grade controlled cement concrete without fly ash trimix usinng

P21 (water reducing concrete admixture at 100 ml per bag of cement & recon 3 s fiber at 125 gm per bag of

cement including Cutting, Filling, Rolling, consolidating and Shuttering of C channel required to maintain level,

slope and thickness of the concrete road leveling of placed concrete with surface vibrator and finishing with power Rupees Six Thousand Five

24 340.70 floater & trowel light brooming the surface & including Construction joints to be formed at every 5 mt distance by 6,512.16 Hundred Twelve Paise Sixteen Cum

grooving with mechanical saw within 48 hrs. Groove/sawed joints shall be made of 5 mm width and depth min Only

(1/3 rd depth of the pavement) as shown in the drawing and shall be filled with ready to use PU sealant of UV

gradecutting & filling of expansion joint as directed by Engineer in charge

Epoxy Coated reinforcement bar : Providing and fixing in position CRS TMT Fe 500/ 550 D Grade Fusion bonded

Epoxy Coated reinforcement bar including transporting, unloading, decoiling, straighting, cutting, bending,

fabricating to required shape, hooking the bars, placing in position and tieing/ binding the system with 18 gauge

annealed (with two strands) wires/ GI wire, welding if necessary, laps, chair, spacers, cover block and supporting Rupees One Hundred Five Paise

as required etc complete as per design for all elements, at all levels, all floor, all height/ depth, all lead and NinetyNine Only

directions by the Engineer-in-charge. The cost of spacer, chair, binding wire, cover block, rolling margin's and

wastage etc are not paid separately. Only lap length shall be payble.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position Rupees SeventySeven Paise

complete. TwentyNine Only

White Stone Bela mesonry block in course in superstructure with stone of approved quality in Lime Mortar 1:6 (1- Rupees Six Thousand Five

27 898.33 Cement : 6-course sand) including packing the joints etc. complete. 6,524.01 Hundred TwentyFour Paise One Cum

White Stone Bela mesonry block in course in superstructure with stone of approved quality in Lime Mortar 1:6 (1- Rupees Six Thousand Eight

28 2220.27 Cement : 6- course sand) including with precast concrete block in superstructue above plinth upto floor two level. 6,819.16 Hundred Nineteen Paise Sixteen Cum

packing the joints etc. complete. Only

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in Rupees Four Thousand Three

29 208.80 foundation and plinth, in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional 4,345.62 Hundred FourtyFive Paise Cum

Half brick masonary in common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in Rupees Six Hundred

30 180.00 foundation, plinth and superstructure in Cement Mortar 1:4. (1- Cement : 4 -fine sand) (B) Conventional 648.58 FourtyEight Paise FiftyEight Sqm

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand), interior plastering above floor two Rupees One Hundred

level for every additional storey height. all type of scaffolding , tools, tackles etc complete. (For all floor) SixtyThree Paise Eighty Only

Providing 20 mm thick double coat mala cement plaster on interior and external brick / concrete work for

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in

Rupees Two Hundred Ninety

32 4282.75 rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel 290.72 Sqm

Paise SeventyTwo Only

including all level, scaffolding, curing, tools, tackles etc complete. ( For all floor )

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand) interior Rupees One Hundred

plastering above floor two level for every additional storey height. all type of scaffolding , tools, tackles etc SeventyTwo Paise Eleven Only

complete. (For all floor)

Providing and applying external finish of average 2 to 2.5mm thick acrylic polymer based texture and pattern with

standard tool and applicator as specified by manufacturer on exterior surfaces at all heights including scaffolding

to give even shades including thoroughly brushing the surfaces free from mortar droping and other foreign matter

and sand paper smoothed etc. complete as per the manufacture specifications and up to the satisfaction of Rupees Three Hundred One

Engineer in-charge/ Architect. The rate includes making of grooves, pattas and finishing as directed by Architect/ Paise NinetyNine Only

EIC. Paint shall be measured and paid in seperate tender item. (Item should be executed by approved applicator

Providing and fixing G.I. hexagonal chickenmesh of size 16 x24 of 22 gauge at junction of concrete and brick work

or between different materials after making "V" grove between two different material surface and filled with rich

Rupees Two Hundred

cement mortar and @ 100mm on each side of surfaces including necessary "U" nails / screws / washers with

35 1102.93 232.79 ThirtyTwo Paise SeventyNine Sqm

cleats for fixing, overlaps, scaffolding at all floors / all levels / all heights / all shapes etc. complete as per drawing /

specifications and direction of Engineer-in-charge. For civil, plumbing, electrical & infrastructure works.

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and

fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per

square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 Rupees Six Hundred EightyOne

(Hessian based self finished bitumen felt) , sixth and final course of stone grit 6 mm and down size or pea sized Paise SeventyFive Only

gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry

mixed with water proofing cement compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm.

Rupees Five Hundred

This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with

37 25.00 522.68 TwentyTwo Paise SixtyEight Sqm

water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with

water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer mixed slurry.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC

structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water

treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral

crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for

horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The

material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by Rupees Four Hundred Six Paise

more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on FiftyThree Only

negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work

shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product

performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out Rupees Seven Hundred

upto surface using white cement including rounding off junctions and extending them upto 15 cm along the SeventyNine Paise Seventy Only

wall,clearing with water and oxalic acid etc. as directed.

Water proof plaster : Providing 15 mm thick water proof cement plaster in single coat on brick/ block masonry or

RCC wall, at all heights, finished even and smooth in CM 1:3 (1 cement : 3 sand) including providing and mixing

Rupees One Hundred

water proofing materials of approved make in recommended proportions by manufacturer and as directed by

40 537.37 197.27 NinetySeven Paise TwentySeven Sqm

Engineer-in-charge and finishing the surface wired finish to receive the tiles/ smooth finish with a floating coat of

neat cement slurry at 2.75 Kg/ sqm etc. complete at floor

RCC precast M.H. Frame & Cover : RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at

site of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per type design & Drawing

Rupees Two Thousand Three

including cost of reinforcement M.S. Angles or Flat, curing mold work etc. (Heavy duty),

41 12.00 2,316.94 Hundred Sixteen Paise Nos

1) Frame suitable for 50cm opening of MH

NinetyFour Only

2) Cover suitable for 50cm opening of MH

Providing and fixing Cast Iron (C.I.) steps/rungs of approved quality, medium/heavy duty, with a minimum weight

as per approved design, confirming IS code specified including embedded anchor/holdfasts in the Reinforced

Rupees One Hundred

Cement Concrete (R.C.C.) wall or brick masonry, complete with necessary fixing and finishing as per standard

42 72.00 128.95 TwentyEight Paise NinetyFive Nos

design and drawings, Fixing C. I. steps in masonry in C. M. 1:3 & MS Febrication work including necessary C.C. for

jointing, welding etc. complete during progress of the work. Dimension C.I. steps 50cm x 15cm. 2.25cm)

Vitrified Flooring (Type - 01) : P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material Rupees One Thousand Five

43 2498.22 including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing 1,546.85 Hundred FourtySix Paise Sqm

& cleaning the surface etc. complete for light shade EightyFive Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Vitrified (Type - 01) : Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and Rupees One Thousand One

44 200.96 dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 1,195.02 Hundred NinetyFive Paise Two Sqm

Flooring (Type-02) : P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar

Rupees One Thousand Four

1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including

45 981.59 1,472.91 Hundred SeventyTwo Paise Sqm

dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

Providing and laying white glazed tiles 6mm/8mm thick in skrting risers of steps and dedo on 10mm thick cement Rupees One Thousand One

46 2438.30 plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 1,127.48 Hundred TwentySeven Paise Sqm

FourtyEight Only

Vitrified Flooring (Type-03) : Providing and laying Lapato / Glossy/Matt/Rustic finish Vitrified tiles flooring using

minimum 10 mm thick tiles as per approved make list or selected by Architect , tile size (800 mm X 1600mm)

including preparing base for leveling with 20mm thick cement mortar 1:6 (1 cement : 6 coarse sand ) and jointed Rupees One Thousand Six

47 990.30 with 3mm thick laticrete grouting of approved shade and colour in proper line and level as per detailed drawing / 1,620.40 Hundred Twenty Paise Fourty Sqm

instruction and approval by architect.The rate shall be inclusive of protecting the flooring by plaster of Paris and Only

plastic and/or bubble top sheets. (At all floor area)

Tile (Type-03) : Providing and laying Lapato /Glossy finish vitrified tiles in skirting, riser of steps and dedo using

minimum 10 mm thick vitrified tiles of approved make list or as selected by Architect of premium quality fixed in

Rupees One Thousand Seven

skirting, etc. on 10 mm thick Cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with 3 mm thick laticrete

48 95.18 1,739.89 Hundred ThirtyNine Paise Sqm

grouting of approved shade and colour in proper line and level for average 125 mm height as per detailed drawing

EightyNine Only

/instruction and approval by architect. ( At all floor area)

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement Rupees One Thousand

slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm Nineteen Paise ThirtyNine Only

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm

Rupees One Thousand One

thick cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to

50 87.93 1,198.64 Hundred NinetyEight Paise Sqm

match the shade of slab including rubbing and polishing etc. complete.

Providing and laying Granite slab (16 to 18 mm thick) one side polished flooring over 20 mm (average) base of Rupees Two Thousand Three

51 298.07 cement mortar 1:6 ( 1 cement : 6 coarse sand) or L.M. 1:1.5 laid and jointed with grey cement slurry including 2,354.13 Hundred FiftyFour Paise Sqm

rubbing & polishing complete, for all floors. Thirteen Only

Providing and laying 16 to18 mm thick polished Granite stone slab machine cut in single piece in risers of steps,

dedo, pillar, sill and jambs or dedo laid on 10 mm thick cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) laid

Rupees Two Thousand Five

over and jointed withgrey cement slurry incl. rubbing and polishing etc complete. The rate includes lodding,

52 1016.76 2,533.37 Hundred ThirtyThree Paise Sqm

unlodding, scaffolding, wastage, making hole, cutting/ chasing, rounding champhering, edge polishing of edges.

ThirtySeven Only

The work shall be carried out as per the approval of architect and engineer-in-charge. for all floors

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 Rupees Seven Hundred Eight

: 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per Paise Sixteen Only

guidlines of IRC : SP 63-2018 etc. Complete.

Kerb Stone : Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm

Rupees Three Hundred

length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for

54 855.29 374.92 SeventyFour Paise NinetyTwo Rmt

fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Urinal partition : Providing & laying 16 to 18 mm thick both side mirror polished granite of approved shade and

quality, seleted and sorted for uniform color for urinal partition/ division plate as per design and in required sizes

and shapes after chasing /cutting of dado with cutter machine fixing shall be carried out in white cement sand

Rupees Two Thousand Five

mortar (1:1) with matching pigment and/ or necessary adhesive. (Only finished granite work shall be measured).

55 5.94 2,591.05 Hundred NinetyOne Paise Five Sqm

All expose edges shall be champhered and polished. The rate includes making hole, cutting/ chasing, rounding

champhering, edge polishing of edges. The work shall be carried out as per the approval of architect and engineer-

Basin Counter/Granite Platform (All Floor : Width - 600 mm ) : Providing and constructing approved shade and

sample of Mirror finish granite platform , 600mm width 25 mm thick Machine polished kotah stone as vertical

supports at sides,including cutting granite & kotah as per required shape , dedo 1'6" ht & size to fit kitchen sink, Rupees Five Thousand Three

56 66.20 moulding, tiles adhesive nosing, chamfered front edges, fixing, disposal of debris etc complete with all labour and 5,370.91 Hundred Seventy Paise Sqmt

materials and as per detailed drawings / architects instruction and approval by Engineer-in-charge. The sample NinetyOne Only

mock shall be approved from EIC.

PANTRY BELOW STORAGE 600DX700/750H : Providing, making, fixing as per detail drawing made from 19 mm IS

710 BWP ply structure aand both side 1.5 mm thick laminate finish shall be of approved make & shade and as per

the detail drawing. All the edges of ply shall be covered with 1.5 mm thick laminate finish Rate shall also inclusive

of all necessary brass satin finish nickel plated/S.S 304 grade hardware like Hinges, locks,6"handle , 75 mm tower

bolts, ball catches/Magnet, The rate shall be inclusive of shelf both side 1.5 mm thick laminatefinish and as per

detail drawer unit for kitchen basket as per selction by architect The rate shall be in sqm of elevation area for all

Rupees Four Thousand Nine

floors and at all heights including all costs complete as per the Architectural drawings & instructions.Only the

57 3.50 4,976.19 Hundred SeventySix Paise Sqmt

elevation area of the storage unit will be measured and paid for. Item for 1.5 mm thick laminate fixing and

polishing is included in this item. The work shall be measured & paid in sqm The rates shall be inclusive of all

wastages, material, labor, taxes, transportation, loading, unloading, fixing in position, etc. complete to the

satisfaction of the Architect and EIC. The mock-up of 1 unit shall be approved from EIC and Architecture prior to

the final production. (at all floor)

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

PANTRY ABOVE STORAGE 600DX800 H : Providing, making, fixing as per detail drawing made from 19 mm IS

BWP ply structure aand both side 1.5 mm thick laminate finish shall be of approved make & shade and as per the

detail drawing. All the edges of ply shall be covered with 1.5 mm thick laminate finish Rate shall also inclusive of

all necessary brass satin finish nickel plated/S.S 304 grade hardware like Hinges, locks,6"handle , 75 mm tower

bolts, ball catches/Magnet, The rate shall be in sqm of elevation area for all floors and at all heights including all

costs complete as per the Architectural drawings & instructions.Only the elevation area of the storage unit will be

measured and paid for. Item for 1.5 mm thick laminate fixing and polishing is included in this item. Approval of all

loose material (sample of materials to be used) & raw manufacturing to be got approved in advance from EIC & Rupees Ten Thousand Seven

58 4.00 Architect prior to the final production of the work. Manufacturing shall in parts or as whole as per the 10,741.77 Hundred FourtyOne Paise Sqmt

requirements & or assembled at site as per the requirement and directed by EIC & Architect. All material to be SeventySeven Only

used shall be as per the drawings & confirm to the relevant detailed material specifications of this document. The

work shall be measured & paid in sqm The rates shall be inclusive of all wastages, material, labor, taxes,

transportation, loading, unloading, fixing in position, etc. complete to the satisfaction of the Architect and EIC. The

mock-up of 1 unit shall be approved from EIC and Architecture prior to the final production. (at all floor)

Concrete flooring : Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone

Rupees Three Hundred

59 523.31 aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm thick. 355.22 Sqm

FiftyFive Paise TwentyTwo Only

Gypsum Ceiling : Providing and fixing single layer water proof gypsum board 12.5 mm thick sections using water

proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x

Rupees Six Hundred Six Paise

60 691.63 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & 606.95 Sqm

NinetyFive Only

drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat on

ceiling incl. making necy. opening for light fitting,diffuser etc. comp. as per detail drawing as directed.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

PLY WALL PANELING FINISH WITH VENEER FINISH : Providing & fixing 12mm thick IS 710 MR Grade ply fixed on

frame work. The framework shall be fixed as per drawing vertically & @ 600 mm c/c vertical & 1200 mm c/c

horizontally. The frame work shall be made from Aluminium section make JINDAL/HINDALCO or equivalent

conforming to IS specification In paneling, (intermediate, perimeter ) & (at vertical or horizontal joint of ply & at

turning point ) shall be fixed to the wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Corro-

shield /Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings

of teak wood /MS washers to ensure right angles and plumb level. All ply/wooden frameworks shall be treated

with anti-termite treatment & hidden The framework shall be covered with approved make plywood(IS 710-

mm ply),adhesive ,tape, headless nails etc ,finished with Veneer ( veneer base 4 mm thick ply) with semiglossy PU

polish & in pattern as shown in the drawing. Rate shall be inclusiveg grooves etc complete as per drawing or as

directed by Employer's representative/ Employer. The rate shall be in Sq.mt of actual paneling work for all floors, Rupees Three Thousand Five

61 30.30 at all heights, all shapes .Rate shall inclusive of all material ,labor scaffolding, tools, tackles, for all heights and 3,502.57 Hundred Two Paise FiftySeven Sqm

for all levels, Rates shall also be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights Only

/air-conditioners ,grills, diffusers etc & providing additional sections for strengthening around the

openings/cutouts, making grooves between wall & board or as per drawing /instruction of Employer's

representative/ Employer. and no extra payment shall be considered for additional sections provided. All curved

surfaces, recesses, waffles shall be part of the paneling including openable shutter wherever required area and

finish with the same material. Rate shall be inclusive of all item inclusive part of paneling Only the clear elevation

area shall be measured and paid.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

False ceiling : Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge &

15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be

of approved texture Fine fissured/Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC

or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot

dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’

runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced Rupees One Thousand Six

62 248.21 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary 1,674.15 Hundred SeventyFour Paise Sqm

cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle Fifteen Only

of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter

wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl

plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in

the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors

wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm

fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel

level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of

all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings and as

directed by engineer-in-charge.Note:- Only calcium silicate false ceiling area will be measured from wall to wall.

No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium -

silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for

Globe, light reflection 85% noncombustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

Flush Door With WPC frame (34 MM) : Providing and fixing in position 35mm thick solid core wooden flush doors

of approved make having fire retardant ply facing on both sides and finished with 1 mm thick laminate as approved

Rupees Six Thousand Five

, WPC frame size - 125 X 63 MM Well Quality Hardware system of Hinges , Boxer type door closer , Door handle

63 485.42 6,570.17 Hundred Seventy Paise Sqm

Euro profile , lock ,Door stop . work complete including all type of hardware, fittings , fixtures etc complete as per

detailed drawings and specifications, sample mock shall be approved from EIC.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Flush Door with frame and finish with 1mm thick Laminate (37MM): Providing and fixing in position 35 mm thick

solid core wooden flush doors of approved make having fire retardant ply facing on both sides and finished with

1mm thick laminate as approved ,Indian Teak Wood Frame size - 125 X 75 MM, Single rebet , Well Quality Rupees Four Thousand Seven

64 277.73 Hardware system of Hinges , Boxer type door closer , Door handle , Euro profile , lock ,Door stop . work complete 4,750.42 Hundred Fifty Paise FourtyTwo Sqm

including all type of hardware, fittings , fixtures etc complete as per detailed drawings and specifications, sample Only

mock shall be approved from EIC.

Double Leaf Flush Door with frame and finish with 1mm thick Laminate (37MM) : Providing and fixing in position

35 mm thick solid core wooden flush doors of approved make having fire retardant ply facing on both sides and

finished with 1mm thick laminate as approved ,Indian Teak Wood frame size - 250 X 75 MM double rebet , Well Rupees Four Thousand Eight

65 20.70 Quality Hardware system of Hinges , Boxer type door closer , Door handle , Euro profile, lock ,Door stop. work 4,899.17 Hundred NinetyNine Paise Sqm

complete including all type of hardware, fittings , fixtures etc complete as per detailed drawings and specifications, Seventeen Only

sample mock shall be approved from EIC.

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG

G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for

Rupees Two Thousand

mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm

66 11.60 2,079.59 SeventyNine Paise FiftyNine MTR

(minimum) alround the frame and fixing with dash fastener (including) of approved size and make, including

applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge.

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614

(Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door

frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG Rupees Eight Thousand Nine

67 5.52 G.I.sheet (zinc coating not less than 120 gm/m2), Including pannelingduly, filled FR insulation material and fixing 8,909.21 Hundred Nine Paise TwentyOne Sqm

with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire Only

resistant primer etc. all complete as per direction of Engineer-in-charge

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Rupees Nine Thousand Eight

68 2.00 Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. 9,815.18 Hundred Fifteen Paise Eighteen Each

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing factory made upvc fenesta wooden colour sliding glazed window with Mosquito net and

Approved sample by Architect/Client/EIC. all height dimension comprising of upvc multi chambered frame with in

built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanizd mild steel section

made from roll forming process of required lenght ( shape & size according to upvc profile ), appropriate

dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket,wool pile,zinc alloy (white

powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be

kg),g.i. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile

Rupees Twelve Thousand Four

69 404.25 of frame & sash shall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's 12,004.10 Sqm

and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with Paise Ten Only

weather proof silicon sealant over backer rod of required size and of approved quality,all complete as per

approved drawing & direction of engineer-in-charg. two track two panels sliding window of 5 mm thick toughen

glass and series 2000 frame 65 x 58 mm & sash 45 x 90 mm both having wall thickness of 1.9+ 0.2 mm and single

glazing bead of appropriate dimension.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm (Jindal

Rupees One Thousand One

Section:2434, @ Wt. 0.643 Kg/mt) with colour Powder Coated alluminium frame for ventilation with 5mm thick

70 15.84 1,175.56 Hundred SeventyFive Paise Sqm

frosted glass as details etc complete for Ventilation. All Level

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required

Rupees One Hundred Fourteen

71 4860.44 spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. 114.44 Kg

Paise FourtyFour Only

Glass Partition With Aluminium Frame : Providing and fixing in position Full height 10mm thick toughened clear

glass partition (as per approved sample) using Saint Gobain or equivalent glass to false ceiling height ply boxing to

hold glass at top & Aluminum Profile(section as per design) at Four side (Periphery) & horizontal & Vertical

section of approved make, sample as per architect's instruction and as per detail drawing. Fixed panels of 10mm

thick customized clear toughened glass, edge polished fixing with necessary cutting of glass as per drawing &

specifications including providing and fixing EPDM quality rubber for aluminum sections / filling transparent

neutral cure glazed & metal silicon sealant of approved make on the periphery of the glass & wood etc Each glass Rupees Two Thousand Two

72 49.18 panel secured to the ply box at top and Aluminium Profile .Item includes all necessary fitting / fixing etc. complete 2,279.63 Hundred SeventyNine Paise Sqm

as per drawing, approval and instructions of the Architect. NOTE: Partition ht will be measured from finish floor to SixtyThree Only

false ceiling level only. The rate shall be in sq.mt for all floors and at all heights including all costs. The rates are

also inclusive of necessary scaffolding, ply box beam, tools, tackles, scaffolding etc complete. Glass width size shall

be as per sugestion by Employer's representative/ Employer. including cost for wooden beam for supprot for glass

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Glass Door with Aluminium Frame corner hinge system with pivot door : Providing and fixing in position full height

10 mm thick toughened clear glass door with all necessary Geze , Dorma hardware accessories as per approved

selection by Architect. 10mm thick Saint Gobain or equivalent make customized clear toughened glass, edge

polished prepared with stainless steel patch fittings with locking arrangement / fixing Each glass panel secured to

the floor by stainless steel patch fitting item includes all necessary fitting / fixing, fixtures- like Geze / Kich/Dorma Rupees Fifteen Thousand Three

73 9.20 or equivalent Hardware system like ( Corner hinges with pivot Glasklar Lock - , Door Handle Keys ,round shape 15,308.13 Hundred Eight Paise Thirteen Sqm

lock with alluminium cover - , Door Stop complete as per specification drawing approval and instructions of the Only

Architect. Rate shall be inclusive of all material loading unloading at all height and all floor. sample mock shall be

approved from Employer's representative/ Employer.

Wall Mirror with wooden frame : Providing and fixing 6 mm thick mirror of Saint Gobain/ASAHI INDIA SAFETY/

MODIGUARD or other approved make shall be fixed on 12mm thick IS 710 ply and 6mm thick MDF with necessary

adhesive, double side tape, screw etc. First class Battens patti framing with water base PU polish shall be fixed at Rupees Four Thousand One

74 18.90 periphery of mirror with Stud 25x50 mm Stainless Steel. Provision shall be made for conceallled light work as per 4,160.20 Hundred Sixty Paise Twenty Sqm

detailed drawing / instruction of architect complete. Rate shall be inclusive of all material loading unloading at all Only

height and all floor. sample mock shall be approved from Employer's representative/ Employer.

Collapsible Door : Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm

Rupees Six Thousand Three

braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia,

75 6.91 6,365.87 Hundred SixtyFive Paise Qui.

steel pulleys complete with bolts, nuts, locking arrangements, stoppers handles including applying a priming coat

EightySeven Only

of red lead paint.

Providing and fixing S.S. bird net jali - using wire gauge with average width of aperture 1.4 mm in both directions

with wire of dia. 0.50 mm all complete With Aluminium equal angle frame or 12 mm mild steel U beading work at

required opening and at any height with all labour & material etc. complete. and fitting with necessary nuts, bolts,

Rupees One Thousand Three

76 1797.03 machine screws etc fixing i/c fixing with necessory accessories and dash / Anchor fasteners of required size. on the 1,303.60 Sqm

top of floors, concretes, wood, walls, sides of slab with suitable arrangements. etc complete for all floors and at all Hundred Three Paise Sixty Only

Wall Punning : Providing and applying Plasto XP Gypsum plaster ( USG Boral) or equivalent make , minimum

mm thick in Wall and minimum 6 mm thick in ceiling , including all labors, tools, tackles, scaffolding, surface

preparation, mixing of material, transportation (lead & lift) applying in position, Levelling, finishing, cleaning etc.

complete to satisfaction of Employer's representative/ Employer. The rate also include making of grooves above Rupees Three Hundred

skirting, Dedo tiles and around window and door jambs etc. (cost of Bonding agent to the ceiling or RCC surfaces is SixtyFive Paise SixtyTwo Only

to be included in the item).item shall be used as per instruction of EIC.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give

Rupees Fourty Paise FiftyNine

78 22058.60 an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and 40.59 Sqm

sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall

Rupees EightyEight Paise

79 22058.60 surface to give an even shade including throughly brushing the surface free from mortar droppings and other 88.39 Sqm

ThirtyNine Only

foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape

Rupees One Hundred

80 2569.65 even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials. etc 122.14 Sqm

TwentyTwo Paise Fourteen Only

Applying priming coat over new steel and other metel surface after and including preparing the surface by

Rupees ThirtyEight Paise

81 370.81 throughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers 38.15 Sqm

and sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel Paint, brushing,

Rupees NinetySix Paise

82 370.81 interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all 96.59 Sqm

dirt, dust and other foreign matter.

Texture paint ( Insider and outside) :Wall painting two coats with low VOC Jotashield Tex Ultra of Jotun or

equivalent approved brand in any shades and colour as directed on wall surface to give an even shade including

applying of a one coat of Penetrating prmer or equivalent and two coats of paint, scaffolding to at any height with

all labour and material thoroughly brushing the surface free from mortar droppings and other foreign matter and

sand prepared smooth etc. complete. The substrate must be sound, clean, dry, free from dust, oil, grease and

laitance etc. All traces of release agents must be removed. On chalky and dusty surfaces, all loose material must

be removed by stiff bristle brushing. The primer / paint application is to be done with the rollers. rate shall be

Rupees Six Hundred

including crack filling and levelling as per manufacturers specfication. Top coat should have.

83 37.44 687.38 EightySeven Paise ThirtyEight Sqm

1) Low VOC content.

2) Crack Bridging ability upto 2.6 mm.

3) 100% pure acrylic emulsion

4) Anti-Carbonation concrete protection

5) Very Low Flame spread

6) Superior Washability. ( At all floor)

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a

Rupees Nine Thousand One

priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle

84 12.69 9,108.48 Hundred Eight Paise Qui.

cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

FourtyEight Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing, fabricating, assembling, hoisting/ erecting and fixing in position MS Rolled Steel Sections, ISMB, ISMC,

Hollow sections, Tubular Sections, MS Plates, Chequered Plates, MS Pipes, Perforated Sheet, deep threaded MS

bolts, threaded J bolts, insert plate, support plate etc at all heights/ all levels/ all floors/ all shapes & sizes with all

leads & lifts as per drawing and direction of engineer incharge. all confirming to latest relevant IS codes for the

workmanship of steel structures like staircases, railings, handrail, jali, gates, grills, bracings, platforms, brackets,

monkey ladder, cattle trap, false ceiling frame work etc. the Rate is including cutting, bending, bolting and welding

the members all as per structural drawings and as per detailed specifications (for materials & workmanship) Rupees One Hundred

85 9628.29 including necessary scaffolding/ staging etc. complete in the situations described hereinafter. The rate shall 121.96 TwentyOne Paise NinetySix Kg

include dry sanding, degreasing (wet cleaning) & preparation of rustfree surface manually or mechanically, metal Only

putty to make the surface even and smooth, 2 coat zinc chromate yellow oxide primer and 2 coat of enamel paint

of approved shade of paint over all the surfaces of the steel sections or as specified in the drawing.

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of the Rupees NinetyOne Paise

pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of removal of Seventy Only

sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 50mm Diameter

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of the Rupees One Hundred SixtyTwo

pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of removal of Paise FiftyThree Only

sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 75mm Diameter

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of the Rupees Three Hundred Eight

pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of removal of Paise Seventy Only

sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 110mm Diameter

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of the Rupees Eight Hundred FiftyFour

pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of removal of Paise EightySix Only

sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 160mm Diameter

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Core cutting : Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or

any other RCC member without vibration by core cutting (diamond drilling) machine including scafolding, safety

majors, disposing the debris, cleaning for all levels/ all height as per structural consultant's drawing, after approval Rupees One Thousand One

90 118.00 of engineer in charge etc compete. Rate shall be inclusive of filling the hole with non shrink grout/Chemical 1,126.66 Hundred TwentySix Paise Nos

Anchoring in good manner. Measurement shall be taken for the depth of holes in running meter for specified SixtySix Only

diameter. Holes shall made by authorised approved agency. (a) holes from 100 dia.

Core cutting : Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or

any other RCC member without vibration by core cutting (diamond drilling) machine including scafolding, safety

majors, disposing the debris, cleaning for all levels/ all height as per structural consultant's drawing, after approval Rupees One Thousand Four

91 98.00 of engineer in charge etc compete. Rate shall be inclusive of filling the hole with non shrink grout//Chemical 1,463.49 Hundred SixtyThree Paise Nos

Anchoring in good manner. Measurement shall be taken for the depth of holes in running meter for specified FourtyNine Only

diameter. Holes shall made by authorised approved agency. (b) holes from 150 dia.

Providing and fixing anchor fastener system chemical based of Hilti or equivalent make for connections in concrete

as per design and drawings and/or as directed by engineer in charge. (Rate shall include cost of bolts, labour, all

material including chemical cartridge (wherever required). T & P for power drilling, cleaning the drilled holes of

loose dust by blowing air, insertion of chemical from cartridge with plastic nozzles as may be required, placing Rupees One Hundred

92 20.00 internally threaded sleeve, driving of bolts, 2 nos-4 mm thick (hot dip galvanized coated) washer, fastening screw 197.46 NinetySeven Paise FourtySix Nos

and tightening with nuts and check nuts etc may be required.Work complete including all type of tools , tackles, Only

scaffolding etc complete at any level and height. work complete as per the instruction of EIC/Client/Architect.

Providing and fixing anchor fastener system chemical based of Hilti or equivalent make for connections in concrete

as per design and drawings and/or as directed by engineer in charge. (Rate shall include cost of bolts, labour, all

material including chemical cartridge (wherever required). T & P for power drilling, cleaning the drilled holes of

loose dust by blowing air, insertion of chemical from cartridge with plastic nozzles as may be required, placing Rupees Four Hundred

93 20.00 internally threaded sleeve, driving of bolts, 2 nos-4 mm thick (hot dip galvanized coated) washer, fastening screw 441.37 FourtyOne Paise ThirtySeven Nos

and tightening with nuts and check nuts etc may be required.Work complete including all type of tools , tackles, Only

scaffolding etc complete at any level and height. work complete as per the instruction of EIC/Client/Architect.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing anchor fastener system chemical based of Hilti or equivalent make for connections in concrete

as per design and drawings and/or as directed by engineer in charge. (Rate shall include cost of bolts, labour, all

material including chemical cartridge (wherever required). T & P for power drilling, cleaning the drilled holes of

loose dust by blowing air, insertion of chemical from cartridge with plastic nozzles as may be required, placing

Rupees Eight Hundred Thirty

94 20.00 internally threaded sleeve, driving of bolts, 2 nos-4 mm thick (hot dip galvanized coated) washer, fastening screw 830.47 Nos

Paise FourtySeven Only

and tightening with nuts and check nuts etc may be required.Work complete including all type of tools , tackles,

scaffolding etc complete at any level and height. work complete as per the instruction of EIC/Client/Architect.

SS RAILING : Providing and fixing stainless steel railing 50mm dia.(16 gauge-Grade 304) Top RAIL with Vertical and

Horizontal support Member 32mm dia and 16mm dia.(16 gauge-Grade 304), as per drawing, references image &

sample, mock up approved by Architect/EIC. Railing made of Hollow tubes, solid bar, channels, plates etc.,

including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel Rupees Two Thousand Nine

95 470.43 dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with 2,960.95 Hundred Sixty Paise NinetyFive Rmt

suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel Only

members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.). Contractor shall

prepare shop drawing based on design, and get approved. Sample/ mockup shall be approved by Architect.

Ply with Laminate finish frame work : Providing and fixing 12 mm thick IS 710 ply with 1mm Laminate finish

Rupees One Thousand Seventy

96 51.33 including all type of fixing,fittings, polishing etc complete as per suggestion of Architect. ( At all floor) 1,070.95 Sqm

Paise NinetyFive Only

CRCA Shutter : Providing and fixing of cupboard shutters made from prime quality CRCA MS sheet (Cold Rolled

Mild Steel sheet), conforming to IS 513 (part-1):2016 standards, of [0.8 mm to 1.0 mm] thickness. The complete

M.S. material of the shutter should be pre-treated (degreased, zinc phosphate,etc..) and epoxy powder coated for Rupees One Thousand Five

97 760.73 corrosion resistance, with a finish thickness of approximately 45-50 microns, in an approved shade/color. Includes 1,596.23 Hundred NinetySix Paise Sqm

all necessary fittings such as stainless steel butt hinges, lock, handle, and other accessories, complete as per the TwentyThree Only

direction of the engineer-in-charge. at All Floor Level

Duct Door finish with cement sheet & frame : Providing and fixing in position 12mm thik ply all proof shutter &

Indian Teak Wood Frame of approved make having fire retadant ply facing on one sides and finished with 12mm

thick cement fiber board with interior Paint and inner side oil paint as approved , shutter fixed with floor of Rupees Two Thousand Six

98 28.80 approved make , lock & handle etc fixtures of approved make list with all necessary fittings etc. The rate 2,670.36 Hundred Seventy Paise ThirtySix Sqm

including of Aluminium frame of base (support) work complete as per detailed drawings and specifications. sample Only

mock shall be approved from Architect/EIC.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing & Fixing of new 10mm Multiwall Polycarbonate Sheets ( Lexan / Makrolon or equivalent ) over Vault

shaped Skylight Roof. The job includes sheets , Anodised aluminium sections like HEST1 & HESB1 containing EPDM

gaskets on both sides and all typs of fabrication alluminium section etc.. The sheet to be fixed as sandwiched

between HEST1 &HESB1 using Self Drilling & Self Tapping Screws ( Hilti /Corroshield or equivalent ). Edges / End Rupees One Thousand Seven

conditions of the sheets must be clamped with structure using anodized aluminium angles / ridges and SDScrews. Hundred Ninety Paise Five Only

Joineries of the sheets and screws must be filled with neutral cure silicon sealant etc complete as per directions of

EIC / Architect. (All Level)

Woodlot Paneling : Woodlot Premium NRC 0.88 with GI Studs. Supplying & Installation of WoodLot Premium FR

Grades 2430x131x16mm made of exterior grade MDF backed with acoustical Fleece providing sound absorption of

0.88 NRC as per ISO 354.To be installed with 15mm Aluminium profile conforms to Aluminium Alloy 6063-T

6.Temper As per BS:1474-1987 and G.I Lock in clips on the back of tongue and Groove system. The density per

panel is 750-800 kg/m3.The panels come with tongue & groove for seamless patterns,4-28mm Groove and visible

panel. These slats are made from acoustical fibreboard with linear perforations for excellent uniformity. The Rupees Ten Thousand Three

100 279.24 perpendicular holes are available on the back of panel which are covered by black acoustical fleece. Achieves 10,373.12 Hundred SeventyThree Paise Sqm

sound reduction of 0.88 NRC. To be installed on Wooden Studs with a backing. 50mm thick,1000 GSM absorb wool Twelve Only

tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 for excellent results.

Ceiling Level - Absorb Wool : 50mm thick,1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-

1991/Insulation and IS 15061-2002 for excellent results.

Blackout curtains + Shear (manual) + Roller blind fabric with cover : should be made up of 30-35% Fiberglass, 65-

70% Vinyl on Fiberglass, it should have specific low emissivity treatment and Lead free with Greenguard Gold

certification. Fabric approved by Melanoma International Foundation (MIF), it should cut UV rays with 97%

approximately and antimicrobial properties as per ASTM E 2180, ASTM G21, AATCC30 Part 3, ASTM D

GREENGUARD Gold and Bacteria Standard ASTM 6329; includes Microban antimicrobial additives. It should have

3% openness, fabric thickness should be 0.50-0.55 mm, fabric weight should be 478 grams per square meter, The

fabirc should be Flame retardant as per California U.S. Title 19 (small scale), NFPA 701 TM#1 (small scale), NFPA Rupees Three Thousand Six

101 424.46 101 (Class A Rating), IBC Section 803.1.1 (Class A Rating), BS 5867 Part 2 Type B Performance, NFPA 701 TM#2 3,658.73 Hundred FiftyEight Paise Sqm

(large scale), CAN/ULC-S 109 (large and small scale), CAN/CGSB2-4.162-M80 with 10 years of warranty against any SeventyThree Only

distortion in fabric due to any reason. Roller blind tube should be made of Aluminium with a diameter of 38mm,

bottom rod should be powder coated and should come with the end cap to support the fabric, aluminium brackets

and a ball chain or any other sturdy fixing arrangement as per manufacturer specification all complete as per

direction of Engineer in charge.

White washing with lime on wall surface (three coats) to give an even shade incl. thoroughly brooming the surface

Rupees Nineteen Paise

102 728.19 to remove all dirt, dust, mortar drops and extra subsequent coat of white washing with lime on wall surface. 19.43 Sqmt

FourtyThree Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Soft Board : Providing and fixing on wall 12mm thick approved quality soft board with cotton cloth/fabric of

approved make and shade on 12mm thick IS 710 MR Grade ply with 19mm x 25 mm thick Ghana teak wood

beading all around including semi glossy PU polish, as approved sample and as directed by Architect. The work

Rupees Two Thousand Seven

103 6.00 shall be measured & paid in Sqm. for all floors, all level and at all heights including all costs, The rate shall be 2,710.01 Sqmt

Hundred Ten Paise One Only

inclusive of lacquer polish to all the exposed wooden members. Only the clear elevation area of the cloth/fabric

shall be measured and paid.

Frosted sparkling glass film : Providing and fixing 3M Scotchcal Frosted Crystal or equivalent approved Translucent,

cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with

customised designs. MCS warranty of 3 (if exposed to direct sunlight) to 10yrs (indoors) must be endorsed by

manufacturer. Rate shall be inclusive plotter cutting design as per architect suggestion. Contractor shall provide

Rupees Two Thousand Four

104 42.84 shop drawing for approval of Architect.work complete incuding all type of tools, tackles, scaffolding etc complete 2,474.00 Sqmt

Hundred SeventyFour Only

as per suggestion of Architect/ EIC. If in case any application finishing will not as per satisfaction contractor shall

remove all film at their cost. Contractor shall do a sample mock of 5 Sqm minimum of glass film) ,shall be

approved from EIC.( At all floor)

Providing and applying Lacquer polish of approved make and finish on new wood and wood based surface to give

an even surface, including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of

wood file after completion of job etc. to the satisfaction of architects / EIC. (Mode of measurements: Only the

Rupees Three Hundred

polished area shall be measured & paid for the items in which polishing is not inclusive in item description) work

105 10.00 377.49 SeventySeven Paise FourtyNine Sqmt

shall be carried out as per the manufacture's specification & sample approved..(Exposed wooden surface at all

floor) (Mode of Measurements: Only the polished area shall be measured & paid for the items in which polishing is

not inclusive in item description)

ACP sheet Paneling : Providing & laying in line and level minimum 3-4 mm thick ACP sheet (selected and sorted for

its uniform colour and thickness) premium ACP sheet cladding of approved shade and quality & using Special

Aluminium Profile Appropriate to resist wind load & dead load with main frame & sub frame with aluminum

bracket & anchor fastner of hilti or other eqivalent brand each & every stone will be individualy fitted so that any

stone can be removed & replaced as & when require. ACP sheet should be continiously supported in full length at

top & bottom.Internal wired finished or mala finished plastered surfaces or required fabrication up to 300 mm ( in

Rupees Two Thousand Nine

scope of contractor) , as per drawing and suggestion of Architect/EIC The rate shall also include for necessary IS

106 20.00 2,923.01 Hundred TwentyThree Paise Sqmt

grade approved ACP sheet façade HC-SF-R SS clamp of 304 hybrid grade.The clamp weight shall be minimum

250gms. Clamp body shall be of 304 grade wherein pin, externally threaded rod, internally threaded tube shall be

of 316 grade. The clamp body shall be of minimum 5mm thickness and shall be able to carry a dead load of 79.5 kgs

at minimum offset.The clamp shall be available with variable offset lengths from 50-65mm and 80-120mm. Test

certificate shall be submitted by the manufacturer,

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

The rate shall be inclusive fixing anchors HRD HR2 of 10 mm dia. (100 mm long). anchors (Nut Version) HSA of

size M10 (90 mm long) of HILTI India Pvt Ltd. medium duty Hybrid injection adhesive of Methacrylate resin which

should be styrene free and used for Anchor fixing in Dry conditions with HY 70 + HAS E rods of dia. M6 / M16of

HILTI India Pvt Ltd The quoted rate are also including cleaning, polishing, and scaffolding etc complete at all

heights, all places, and all shapes as per drawings and including laying in desired design and pattern and as per

approved drawing or as directed by the EIC/Architec Rate to be inclusive of water based Silicone paint of

Downcorning , Kerakoll as per approved make list on stone surface as per approved sample by Architect/Client.

Rate to be inclusive of all material, wastage, necessary tools tackles etc for fixing at all heights and for all floors.

Clear laid area shall be measured & paid in sqm.grid size will be of cutting,polishing & grooving will be in

contractors scope vertical groove will be of 6mm beetween two sheet to be kept open for rain scren principle & or

may be sealed by dow corning appropriate grade silicon

FULL HT STORAGE(CARPENTORY WORK): Providing, making and fixing storage units in position as per reference

drawings. Storage made from IS 710 MR Grade 19 mm thick and 12 mm ply , finish with laminate both side as per

approved make and shade Solid Shutter: shall be made from IS 710 MR Grade 19 mm thick ply with both side

laminate finish with approved locking arrangment system. Ply shutter with refrences image, sample, Detail

Rupees Seven Thousand

107 88.00 Drawings and as per architect / EIC instruction. made from aluminium SS finish profile (olive or eqvilant approved 7,019.60 Sqmt

Nineteen Paise Sixty Only

make) with require all necessary accessories And locking arrangment system Shelf: as instruction of Employer's

representative/ Employer making and fixing shelf from IS 710 MR Grade ply finish with both side approved

Laminate. The rate shall be in sqm of elevation area

TV UNIT (+300mm Depth) : Providing & fixing projector drawer unit As per detail drawing and reference image

and detail shape & size with require accessories.

Top 35 MM th made from 12 mm th IS 303 ply & Laminate finish Storage body is made of 19mm 303 MR Grade

ply with 1.00 mm laminate finish and inner side 1 mm thick laminate finish including require nos of drawer with

all type of fittings ,cutout for air cerculation , require fixtures, hardware Hettich/Haffle make etc complete .SS

grade conceal handle shall be provide as per approved selection &detailed drawing and instruction of Employer's Rupees Fifteen Thousand Six

108 7.68 representative/ Employer.Rate shall incusive require fabrication work considering load capasity of AV 15,651.02 Hundred FiftyOne Paise Two Nos

equipment.The work shall be done as per the approved specifications, sample approved and as directed by the Only

Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages,

necessary tools & tackles, adhesives consumable hardware & required SS 304 grade hardware/accessories of

approved make. The rate shall be in sqm of elevation area.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Exterior Aluminium Jali With Aluminium Frame work : Providing & fixing Aluminium Jali With Aluminium Frame

work equivalent make, design, sample and Approved by Architect/Employer's representative/ Employer. in

required shape, size & thickness all as per manufacturers specifications, such as all Exterior Alu.jali with frame

should be made by using Alu. frameing and Pure Polyester Powder Coating for External Applications, Metallic Or

Antique Look Finishes, using Aluminium jali. The frame work shall be made from Aluminium section make JINDAL/

HINDALCO/ DOMAL/ SAPA or equivalent make as per approved by Architect/EIC conforming to IS specification In

framing, shall be fixed to the wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Corro-shield

/Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings / MS

washers to ensure right angles and plumb level. with as per approved drawings and reference images. Jali

elements thickness shall be 2 mm. fixing edges will be 4O TO 50 MM Frame shall be fixed on RCC Structure/Brick Rupees Four Thousand Seven

109 541.61 Work/ Primary Steel Structure (MS with protective coat of Red oxide/Zinc Primer Shall be Used). Hilti make GI 4,773.03 Hundred SeventyThree Paise Smt

Screw Fastners or equvalent, GI Thread Rods and MS cleats shall be used for fixing of Alu.jali elements on RCC/MS Three Only

Primary fabricated structure. Joints shall be filled with base material of Alu. jali as and where required. The quote

rate shall be inclusive of all design, & shop drawing and sample mock of all elements approval from Architect &

consultant. The quote rate shall including necessary scaffoldings for all heights, all Taxes, duties, statutory

obligations and safety code compliance as per client. Rate shall be inclusive of all required fabrication work for

fixing only primary strcure shall be provided as base structre only as per requirement. Mode and method of

measurement shall be in accordance with IS: 1200.a )

Lawn plantation : 1) Supplying and filling with good quality garden soil obtained from outside, including watering,

ramming well, consolidating, compacting and dressing etc. complete, as directed. 2) Supply and spreading of FYM

shall be done in proper slope including watering and fine dressing. Termite treatment to be done before laying of

FYM. 3) Providing and laying lawn with earth 50mm to 60mm thickness on prepared ground with proper level and

ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen Rupees Six Hundred FiftySeven

and light watering with sprinkler and maintenance more till the grass establish properly, as per direction of Paise Sixty Only

Engineer in charge. All steps have to followed by contractor as specified for proper establishment of lawn. Cost

shall be for surface preparation to after lawn establishment, all steps inclusive in this item.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Convex Mirror is a curved mirror : Providing and supplying Convex Mirror as per references image, detail and

approved sample by Architect/EIC. The Convex Safety Mirror is structured with a polycarbonated front and acrylic

back which makes it lighter and easy to place on any exterior. It also looks like a bubble mirror that has a curvature

of the 130-degree view. The Convex Mirror comes with a protective film coating that makes the traffic mirror

scratch-resistant, break-resistant, and tear-proof.The Polycarbonate Lens reflects a crystal clear and bright image

of the view which can be seen from a long distance. It also magnifies the opposite fronts that help the drivers to Rupees Two Thousand Nine

111 2.00 locate small things clearly. The contractor shall Convex Mirror with Installation Kit, Nuts & Bolts Included support, 2,903.75 Hundred Three Paise Each

Location, any Height and all complet installation work as per site condition. This Item includes cost of all labour, SeventyFive Only

transfort etc. as required for completing the work in all respects. All works are carried as per approval and

instructions of the architect. Rate shall inclusive of sample, all materials, loading, unloading, all taxes,

transportation, placing at all floors and for all leads,all accessories as described in item description.

Road Marking with hot applied thermoplastic paints with reflectorising glass beads on bitumen/RCC surface

providing and laying a hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads

@250gms/m2 area , thickness of 2.5mm is excluding of surface applied glass beads as per IRC: 35-2015. The

finished surface to be levelled, uniform and free from streaks and holes. Thermoplastic paint shall be used for

Zebra Patta, Bump Patta lane, edge line, cut patta, arrows for direction, letter or number writing etc. The white Rupees Three Hundred

112 81.45 colour marking should provide liminance co-efficient on cement road shall be min 130 mcd/m2/lux and Asphalt 367.72 SixtySeven Paise SeventyTwo Sqm

road shall be min 100 mcd/m2/lux during the service life during the day time the marking should make the Only

performance criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-

of IRC: 35-2015. Warranty for retro reflectivity shall be 2(Two) years.

Providing and fixing of Corner Guard for Various Flashing in 100mm x 100mm size in Equal Shape with 5mm edge

lipping on both side . The Angle Flashing shall be made out of 8 to 10 mm thick, The corner guard shall have plastic Rupees Three Hundred

113 24.00 protective guard film of minimum 25 microns to avoid scratches during transportation. The U track shall be fixed 372.84 SeventyTwo Paise EightyFour Nos

with suitable POP rivet with wall and roof panels with minimum spacing of 450 mm c/c. size of guard 1000mm Only

Providing and fixing Rumblers strips of required size with any design suggested by Architectect/ EIC like bottom

design, chequered design, anti skid pattern specially designed for road grip as per drawing & sample approved by Rupees One Thousand Seven

114 36.00 Architect which is covered with premix bituminous carpet at 1m centre to centre at approved locations to control 1,788.71 Hundred EightyEight Paise Rmt

speed marked with white strips of road marking paint etc complete as directed by Engineer in charge. SeventyOne Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Cat Eye/Road Stud/RPM : Supplying of Molded TwinShanks Raised Pavement Markers made of polycarbonate and

ABS moulded body and reflective panel swith micro prismatic lens capable of providing total internal reflection of

the lightenteringthe lens face and shall support a loadof 13635kgs. tested in accordance to ASTMD4280Type

Handcomplying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06.

The height, width and length shall not exceed 20mm, 130mm and 130mm and with minimum reflective area of

Rupees Three Hundred

13Sq cmon each side and thes lope to the base shall be 35+/-5 degree.The strength of detachment of the

115 25.00 326.23 TwentySix Paise TwentyThree Each

integrated cylindrical shanks, (of diameter not less than19+/-2mm and height not less than 30+/2mm) from the

body is to be a minimum value of 500Kgf. Fixing will be by drilling holes on the road for the shanks togo inside,

without nails and using epoxy resin based adhesive as per manufacturers recommendation and The color of the

marker should be as per the IRC 35-2015 and as directed by Engineer-in-charge.

Kota Stone SHELF : (350 - 500 D) : Providing, making, fixing as per detail drawing and required length and depth

shelf made from 25 mm Kota Stone (1-Cement: 4- fine sand ) with one side finish polished, round edge and

providing lighting arrangement cutout and fixing as per detail drawing and instruction of EIC.Rate shall inclusive all Rupees Four Hundred Thirty

necessary hardware and fitting.The work shall be done as per the specifications, sample approved and as directed Paise TwentyFour Only

by the Architect and Engineer-in-charge. .Rate shall inclusive of providing mock up sample for approval of

Direct Bought Out Item : Providing and placing in position SS brush finish (12 LTS PEDAL BIN/ STEP BIN -) of Kich , Rupees One Thousand One

117 85.00 Dorma ,etc Square Pedal bin 10x15 Stainless Steel Dustbin or Equivalent as per images and as selected by the 1,184.73 Hundred EightyFour Paise Nos

Architect. SeventyThree Only

Artificial Plant : Providing and supplying planters with plant as per selection of Architect. Item includes cost of all

Rupees Three Thousand One

labour, transfort etc. as required for completing the work in all respects. All works are carried as per approval and

118 20.00 3,153.47 Hundred FiftyThree Paise Nos

instructions of the architect. Rate shall inclusive of sample, all materials, loading, unloading, all taxes,

FourtySeven Only

transportation, placing at all floors and for all leads.

Providing and fixing Sainless steel signage plate of 1.5mm thick with laser print/ etching and filled with duco paint Rupees Seven Thousand Two

119 1.53 of approved make including fixing to the wall or door with required acessories and as specified type including fixing 7,285.33 Hundred EightyFive Paise smt

etc complete as directed by engineer in charge ThirtyThree Only

DOOR MAT : 3M Nomad - Wiping technology - Heavy Duty 7150 - or eqvivalant approved make Grey Colour: Open

Contruction Loop Matting with Crush Resilient Vinyl with backing. Matting Should be durabe shouldn't Flatten ove Rupees One Thousand Two

120 61.80 time. Thickness Should be 13mm Min.Suitable for heavy traffic areas, where traffic is upto 4 lakh people per year. 1,261.39 Hundred SixtyOne Paise Sqm

work complete as per approved sample. ThirtyNine Only

Providing & placing in position DIGITAL CLOCK - WALL MOUNTED as per architect selection Ajanta Digital Wall Rupees Two Thousand

121 90.00 Clock(Brown, Black, With Glass) 2,079.09 Nos

SeventyNine Paise Nine Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Signages : Providing and fixing of the following signages using make of cosign or equivalent approved make by

architect.All the detailed work out as per the detailed drawing and instruction of EIC., specifications and drawings

as indicated there in to all heights and elevation including necessary scaffoldings / supports /permanant fixing with

cement mortor if fixed to ground etc complete in all respects.The Signage cost should be inclusive of Rupees One Thousand Eight

122 56.00 panels,hanging system,bridges,primary & secondary fixings,vinyl,painting,powder coating self glowing mateial as 1,888.60 Hundred EightyEight Paise Sixty Nos

directed etc.All shop drawings and coordination with other services is in scopeof contractor.( At all floor) Size (150 Only

x 600mm) - FACE /WALL MOUNTED NAME PLATES/SIGNAGES/INFORMATION SIGNAGES (with back lit)

Providing, supplying and placing World Globe - as per sample approved by architect Rupees Seven Hundred

123 2.00 749.17 FourtyNine Paise Seventeen Nos

Wall Painting (Canvas painting) : Providing & fixing painting made from canvas painting Canvas –suitable for oil

and acrylic paints. The 100% cotton plain-woven canvas 1.5 mm thick laminatewith UV protection, abrasion &

chemical resistance.with require stretching and/or framing.work approved by Architect. The art work shall be

hanged on the wall using heavy duty approved key-hole chaplas The concept of the painting work will be sugeested

Rupees Fourteen Thousand Five

by architect and interior designer and based on that offers from the artists to be invited for design and execution of

124 23.04 14,518.75 Hundred Eighteen Paise Sqmt

the painting. The selection of the artist is to be done by architect and interior designer only. Main contractor is

SeventyFive Only

bind to follow the methodology suggested by architect and interior designer to be followed for development of

commissioned art work.Rate are inclusive of artist appointing by main contractor. ( Paintings Generic)

Natural Plant : Providing and supplying planters as per site requirement. The contractor shall cater for planter

with plant as per selection made by Architect. The Architect shall recommend worth Rs. 4000/-piece maximum

or as requirement. The contractor shall be paid 15 % of the incurred cost on producing the bills / vouchers for the

same. Item includes cost of all labour, transfort etc. as required for completing the work in all respects. All works Rupees Four Thousand

are carried as per approval and instructions of the architect. Rate shall inclusive of sample, all materials, loading, SixtyFive Paise TwentyFive Only

unloading, all taxes, transportation, placing at all floors and for all leads,all accessories as described in item

description.As approval of architect.

Inauguration Plate : Providing & fixing inauguration plate (Takhti) made from +18 mm thick Granite with

embossed/engraved text letters made from SS 304 grade of various sizes

1. The fonts and letters shall be as per the reference drawing made from SS 304 with national Emblem Logo The

work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample

Rupees Seven Thousand

126 2.16 approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of 7,052.26 Smt

FiftyTwo Paise TwentySix Only

all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all

places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional

claims will be entertained for this.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

S.S. 304 Letters : Providing and Fixing the S.S. 304 Letters with back light of given size as per Architect's drawings

and approved sample or make (Approx Height of each letter 18 to 36 inches) along with all necessary hardwares,

scaffolding, Alu/MS Back support, hanging support and accessories, The rate shall be for complete item inclusive of Rupees TwentyTwo Thousand

127 42.00 all material, labour, wastages, necessary tools & tackles, for all floors, all heights, all levels and all places within 22,649.25 Six Hundred FourtyNine Paise Each

campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be TwentyFive Only

entertained for this. (Consider Letter : BOYS HOSTEL / GIRLS HOSTEL)

SS LOGO : Providing and Fixing Logo including the design, fabrication, supply, and installation of stainless steel (SS)

backlit Logo for signage with SS plate. Letters shall be made from high-grade SS 304 with a brushed or mirror finish

and sample approved as directed by the Architect and Engineer-in-charge.. logo made SS plate any shape with

backlit of given size & shape as per Architect's drawings and approved sample or make (Approx Height of logo

to 36 inches) along with all necessary hardwares, CNC cutting, scaffolding, Alu/MS Back support, hanging support , Rupees Eleven Thousand

128 4.00 accessories, and vinyl,painting,powder coating self glowing mateial as directed etc. The rate shall be for complete 11,034.25 ThirtyFour Paise TwentyFive Smt

item inclusive of all material, labour, wastages, necessary tools & tackles, for all floors, all heights, all levels and all Only

places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional

claims will be entertained for this.

Charcoal fluted panel PANELING With Polish/PU Finish : Providing & fixing 12mm thick Fluted Panel fixed on

12mm plywood & frame work. The frame work shall be made from PLY Equivalent make approved by

Architect/EIC conforming to IS specification and vertical grooves that add texture and depth to interior or specified

interior walls. The panels are designed with interlocking edges for a seamless finish. The installation includes

Rupees Two Thousand Two

necessary surface preparation and attachment using adhesive and/or mechanical fasteners as per manufacturer.

129 420.00 2,217.47 Hundred Seventeen Paise smt

All frameworks shall be treated with anti-termite treatment & hidden The framework shall be covered as per

FourtySeven Only

instructed by EIC. Approved make Fluted panel,adhesive ,tape, headless nails etc ,finished with Polish/PU paint &

in pattern as shown in the drawing. Rate shall be inclusiveg grooves etc complete as per drawing or as directed by

EIC/ Architect.

Decorative Handle(pair) : Providing & fixing CNC cutting and design on MDF/veneer fxed on ply with necessary

accessories etc with complete on glass/flush door finish with veneer. The work shall be done as per the approved

shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect/EIC.

Provding and fixing/placing custom made decorative handle as per detail drawing/ref.image.The work shall be

done as per the approved shop drawing (to be prepared by contractor), specifications, mock up sample approved Rupees TwentyTwo Thousand

130 2.00 and as directed by the Architect/EIC. The rate shall be for complete item inclusive of all material, labour, wastages, 22,591.68 Five Hundred NinetyOne Paise Pair

necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. SixtyEight Only

Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained

for this. The unit shall be manufactured in parts and these parts shall be assembled at site.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing 'Y' shaped barbed wire fencing on compound wall top with vertical angle of 50x50x6mmx0.50

mt. height, two cross angle 50x50x6mmx0.45mt. Length, having 3 horizontal and two diagonal rows of barbed wire

(9.38 kg/100 rmt) on vertical angle and three horizontal and two diagonal barbed wire rows on each cross angle

Rupees Three Hundred

131 1275.00 incl. cost of barbed wire, necessary GI stapplings, fixing on top of compound wall, painting angle with one coat of 362.61 Rmt

SixtyTwo Paise SixtyOne Only

anticorrosive primer and two coats of enamel paint of approved qaulity, necessary scaffolding etc. complete as per

the direction of the Engineer in charge.

PLUMBING FIXTURE : Providing, fixing, jointing and testing in position of various Bathroom C.P. Fixtures with Rupees One Thousand Four

132 38.00 hydraulic testing complete as per design, drawing and instruction of site incharge. 25mm Dia Control Valve 1,451.88 Hundred FiftyOne Paise Nos

EightyEight Only

Providing and fixing screw down bib taps of following size. (B) Brass chromium plated screws down Bib Tap. (i) Rupees Two Thousand Paise

15mm dia. Ten Only

Providing and fixing health faucet with 1 m PVC tube and swivel hook including all fittings complete. Rupees One Thousand Five

134 61.00 1,585.45 Hundred EightyFive Paise Nos

FourtyFive Only

Providing, fixing, jointing and testing in position of various Bathroom C.P. Fixtures (Angle Cock) with hydraulic Rupees Two Thousand Two

135 74.00 testing complete as per design, drawing and instruction of site incharge. Urinal stop cock. 2,268.41 Hundred SixtyEight Paise Nos

Providing and fixing white glazed vitreous china wall mounting type (European type) water closet with C.P. bolts,

nuts, C.I. Chair or other hanging arrangement, white solid plastic seat with lid, C.P. brass hinges and rubber buffers,

Rupees Seventeen Thousand

Metropole flush valve reguler 40mm size (concealed body) with exposed shut off provision , C.P. brass screws and

136 53.00 17,968.41 Nine Hundred SixtyEight Paise Nos

washers complete, including cutting and making good the walls floors where required. Wall hung EWC &

Concealed Flush Valve Complete) matching white plastic seat with lid & CP brass hinges & CP push plate.

Providing and fixing White glazed vitreous Wash Basin Over-Counter, with supporting in stone flooring, 1 no,

Rupees Five Thousand Eight

mm CP Bottle trap with extension piece to wall flange with rubber adopter for waste connection,1.2m Flexible Pipe

137 47.00 5,819.81 Hundred Nineteen Paise Nos

[1No] and waste coupling. Etc complete. Wash Basin Table Top - 420x420x155 mm

Providing & fixing in position 15 mm C.P. brass angle cock of best quality with 1.2 Rmt Long pvc Tube and Rupees Two Thousand Paise

accessories with necessary fittings etc. complete. Ten Only

Providing & fixing in position 15 mm C.P. brass pillar cock of best quality with necessary fittings etc. complete. Rupees One Thousand Seven

139 40.00 1,751.75 Hundred FiftyOne Paise Nos

SeventyFive Only

Providing and fixing TOWEL RING SQUARE , as approved by the architect. Work complete including all type of

Rupees Nine Hundred

140 20.00 fittings, etc complete as per suggestion of Architect/EIC. 974.01 Nos

SeventyFour Paise One Only

Providing and fixing SOAP DISH HOLDER as approved by the architect. Work complete including all type of fittings , Rupees One Thousand Three

141 49.00 etc complete as per suggestion of Architect/EIC. 1,344.74 Hundred FourtyFour Paise Nos

SeventyFour Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Supply, Installation, Testing & Commissioning vitreous matrix set (For Handicap) including matrix EWC (European

type water closet) with cistern, wall hung matrix wash basin, lever arm faucet for ease of operation, centre pre- Rupees FiftyThree Thousand

142 2.00 punched tap hole, grab bar with slightly lower height for added convenience & fixed to wall with brackets including 53,924.73 Nine Hundred TwentyFour Paise Nos

cutting and making good the wall and floors as required. Colour Star White. SeventyThree Only

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush

Rupees One Thousand Seven

143 9.00 pipe. (A) Squating plate pattern white earthenware 550mm x 300mm. 1,706.08 Nos

Hundred Six Paise Eight Only

Providing and fixing Kitchen sink with C.I. Or M.S. brackets, painted white including cutting holes in walls and Rupees Two Thousand Three

144 9.00 making good the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size 2,326.66 Hundred TwentySix Paise Nos

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or

Rupees Eight Hundred

145 40.00 plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. 859.41 Each

FiftyNine Paise FourtyOne Only

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each

Rupees Two Hundred

EightyTwo Paise Sixteen Only

TOTAL (Civil , Interior & Plumbing Fixture) (A)

Drilling 300mm dia.pilot hole hydrolic drilling machine & drilling trully vertically (testing by vertically test) bore

hole in alluvial strata,any kind of soil incl.sand,murrum,hard murrum,soft rock,hard rock incl.cost of bentonite Rupees One Thousand Six

147 300.00 powder done by mud flushed rottary equipment bore hole should stand at least for 27hrs.incl.lowering the pipes in 1,634.20 Hundred ThirtyFour Paise Rmt

position as directed and incl.supplying and packing gravel of 4mm to 6 mm size etc. comp. as directed. Twenty Only

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE

410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed

& approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand Rupees Three Thousand Nine

and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as Hundred SeventyFive Only

per direction of Engineer-in-charge. (B) 200 mm nominal 6 mm thick

Development of hole by air compressor having capacity 400 cfm/100 psi till sand free discharge of water Rupees TwentyOne Thousand

149 1.00 incl.testing of water supply flow etc. comp. as directed. 21,806.68 Eight Hundred Six Paise Job

SixtyEight Only

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected

Rupees One Hundred

150 250.00 at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr (B) 163.62 LS

SixtyThree Paise SixtyTwo Only

50 mm inner Dia.

Supplying & Fixing 50 mm dia heavy top bottom piece, G.I. Bend, Coupling, sand guard MS clamp with Nut Bolt etc. Rupees Five Thousand Nine

151 1.00 complete as directed by EIC. 5,968.60 Hundred SixtyEight Paise Sixty Mtr

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Water Analysis test in Govt.approved laboratory incl. all water testing etc. comp. as directed Rupees Three Thousand Three

152 1.00 3,361.15 Hundred SixtyOne Paise Fifteen slots

Providing water harvesting pit of 5.50 m Dia well and 2.46 mt x 2.46mt x 4.00 mt size brick masonary well for

water logging with excavation in any strata upto four meter depth, filling the pit with B.T. Metal 40 mm in 0.80 mt. Rupees One Lakh FourtyEight

depth with 25-40mm kapachi, 0.80 mt. depth and 0.50 mt. depth with coarse sand & charcoal in layers including Thousand Three Hundred

making P.V.C. line for water inlet etc. as directed with 300mm dia bore 40 mt. depth and 200mm dia UPVC CM NinetySix Paise EightyThree

type casing pipe as slott 1.5 to 2.0 mm size and ordinary pipe with gravel packing or as directed. Only

Providing and constructing filter chamber of size 1.50 x 1.50 x 1.50 mt. as directed including connection rainwater

Rupees TwentyOne Thousand

pipes as per detailed as directed by Engineer in charge including cost of labour and material

154 1.00 21,721.55 Seven Hundred TwentyOne No

Paise FiftyFive Only

RCC Hume Pipe : Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road

Rupees Three Hundred

155 50.00 crossing or on floor with necessary material in an approved manner and making the ground as per original.(C) 300 343.40 No

FourtyThree Paise Fourty Only

TOTAL (BORE WELL & Rain Harvesting System) (B)

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Three seater sofa Modular (Type-01) : Providing and Supplying Cushion three seater sofa SIDE FRAME

ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form

the leg-cum-armrest assembly. It should be made of 03.81 ± 0.03cm. x 0.2 ±0.016cm thick cmx0.16cnn and

black powder coated (DFT 40- 60microns). The ends should be fitted with ABS moulded end caps.TIE MEMBER: It

should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should

be used to connect the side frames The tie-member should be of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick em x

0.16cm and black powder coated ( DFT 40-60 microns ). The seat/back assemblies should be mounted on one of

the tie-member which has 5.0 ±0.1em x 5.0 ±0.1 em x 0.5 ±0.1em. thk 5 5 ±0.1em Long MS. Std. angles welded to

mount the seat and back. SEATREST ASSEMBLY: The seat rest assembly consshould be ts of a fabricated inner-

frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density Equal45 +1- 2 Kg/m3

with Hardness load 25 ± 2 kgf for 25 Percent compression of the foam. The complete moulded seat rest assembly

Rupees TwentyThree Thousand

should be covered with a replaceable fabric upholstery cover SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T)

156 2.00 23,869.33 Eight Hundred SixtyNine Paise No

BACKREST ASSEMBLY: The backrest assembly should be flexing type and consshould bets of a fabricated inner-

ThirtyThree Only

frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density Equal45 +1-

Kg/m3 with Hardness load 14 ± 2 kgf for 25 Percent compression of the foam. The complete moulded backrest

assembly should be covered with a replaceable fabric upholstery cover. BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X

6.0cm (T).ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon and fitted to the front end of

side frame assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor surface.

Overall Dimensions of Chair- Seat Height- 43.5 cm. Height- 78.5cm.Width and Depth of Chair as - Width-164.0cm

and Depth-70.0 cm. The rate shall include all materials. hardware, and labour etc. complete as per instruction of

engineer-in charge. (Waiting Area-GF)

Three Seater sofa-Custom Made Sofa (Type-02) : 2100mm (L) x 715 mm (B) x 800 mm (H) The seat shall 150 mm th

40 density & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and

instruction from EIC/Architect all external & internal exposed woodwork to be finished in PU matt finish polish.

.The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample

approved and as directed by the EIC/Architect . The rate shall be for complete item inclusive of all material, labour,

wastages, necessary tools & tackles, approved make for all floors, all heights, all levels and all places within Rupees FiftyFour Thousand

157 8.00 campus. Contractor shall do all the needful and shall fulfill EIC/Architect's design intent. No additional claims will 54,381.37 Three Hundred EightyOne Paise No

be entertained for this. Rate shall inclusive of shop drawing, mock up sample, all materials, loading, unloading, all ThirtySeven Only

taxes, transportation, placing at all floors and for all leads, all accessories as described in item description. As

approval of EIC/Architect. (Location : Living Room - GF)

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

2 Seater sofa - Modular (Type-01) : Providing anci Supplying Cushion two seater sofa. SUE FRAME ASSEMBLY:

The side frame assembly should be fitted to the two ends of the connecting beam ass mbly to form the leg-cum-

armrest assembly. It should be made of 0 3 81 10.03cm. x 0.2 +0.016cm. thick crnxÜ 16cnn and black powder

coated (DFT 40- 60micror.s). The ends should be fitted with ABS moulc!ed encl caps TIE MEMBER: It should be the

connecting beam assy. 'vhich hoids the two side frames to each other. 2 nos tie members should be used to

connect the side frames. The tie-member should be of C 3.8 +0.03cm. x 0.2 +0.016cm. thick cm x 0.16cm and

Dleck po'wder coated ( DFT 40-60 microns ) The seat/back assemblies should be mounted on one of the tie-

member which has 5.0 +0.1cm x 5.0 +0.1 cm x 0.5 +0.1cm. thk 5.5 +0.1cm Long MS. Std angles welded to mount

the seat and back.SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame

assembly insitu-moulded High Resilience (HR) Polyurethane foam having density Eoual 45 +1- 2 Kg/m3 with

Hardness loed 25 + 2 kgf foi 25 Percent compression of the foam. The complete moulded seat rest assembly

Rupees Seventeen Thousand

should be covered with a replaceable fabric upholstery coverSEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm.

158 4.00 17,190.20 One Hundred Ninety Paise No

(T)BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner-

frame assem.bly insitu-moulded with High Resilience (HR) Polyurethane foam having density Equal 45 +1- 2 Kg/m3

with Hardness load 1 4 + 2 kgf for 25 Percent compression of the foam. The complete moulded backrest assembly

should be covered with a replaceable fabric upholstery cover.BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm.

(T).ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon and fitted to the front end of side frame

assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor surface.Overall Dimensions

of Chair- Seat Height - d3.5 cm. Height - 78.5cm.Width and Depth of Chair as - Width-113.0cm and Depth-70.0

cm.The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in

charge. (Waiting Area-GF)

2 Seater sofa - Custom Made Sofa (Type-02) : 1500(L) x 700 (W)X 700(H) made up of Solid teak wood frame PU

semi gloss finished polish. The seat & back shall be in high density foam & finished in Approved fabric upholstery &

back - back side finish with ply 303 & febric finish as per the drawing/image and instruction from Architect/EIC all

external & internal exposed woodwork to be finished in PU semi gloss finish polish. The work shall be done as per

the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the

Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, Rupees FourtyEight Thousand

159 4.00 necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. 48,227.70 Two Hundred TwentySeven No

Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained Paise Seventy Only

for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, all taxes,

transportation, placing at all floors and for all leads,all accessories as described in item description.As approval of

architect. (Location : Living Room - GF)

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

OFFICE TABLE (Type-01) : Providing and Placing Table: The main desk shall be of dimension 1500 x 750 x 740 mm

additional side runner of 1050 x 450 x 705 mm. The table top and side panel of the main and side table to be made

out of 25 mm thk plain particle board (PPB) cladded with 0.6mm thk post formed laminate and 1mm thk backing Rupees ThirtySix Thousand

160 2.00 laminate (BDL). The modelsty shall of 18 mm PPB cladded with 1mm thk decorative laminate (DL) on both sides 36,774.10 Seven Hundred SeventyFour No

and edges to be selaed with 2mm thk PVC beading. A mobile pedestal of size 646H X 390WX 435D shall be Paise Ten Only

SIDE TABLE (CORNER TABLE) : Providing and Placing The side table GLASS should be 60 cm(W) x 60(D) x 35.1cm(H),

12+/-0.33 mm thick black tinted Toughened Glass UV glued with bushes made in SS 202 grade for fixing with Rupees Four Thousand Two

161 8.00 understructure. The SIDE TABLE UNDERSTRUCTURE is a welded Assembly made in SS202 grade having Dia 4,221.80 Hundred TwentyOne Paise No

12+/-0.04 as per IS:1762 Eighty Only

Center Table : Providing and Placing The side table GLASS should be 112 cm(W) x 60(D) x 35.1cm(H), 12+/-0.33

mm thick black tinted Toughened Glass UV glued with bushes made in SS 202 grade for fixing with Rupees Five Thousand Six

162 10.00 understructure.The SIDE TABLE UNDERSTRUCTURE is a welded Assembly made in SS202 grade having Dia 5,615.60 Hundred Fifteen Paise Sixty No

12+/-0.04 as per IS:1762 Only

KING SIZE BED : Providing and Placing King Bed made of 18mm thick Prelam MDf back rest ,foot rest both sides

with 2mm thick pvc edge bidding.Mattress board made of Consist of Pro-Lift Bed Fitting Easy Fit Extended Arm,

Frame with wooden slat and mounting brackets (in flat pack condition)Bed top size of – & 1830 x 2000mm. Double

& triple row of 53 x 8.5mm slats for strength, stability & comfort.30° opening angle allows easy access.Ideal for Rupees FiftyFour Thousand

163 12.00 storage under the bed. Hydraulic Ideal for storage under bed. Special Heavyduty gas springs available in two loads. 54,822.80 Eight Hundred TwentyTwo No

30° opening angle allows easy access. Easy to lift (with the weight of top board) with minimum force. Easy access Paise Eighty Only

as the gas lift keeps the bed top stay. Easy to fit. Long brackets provided for better support to the bed platform,

Finish : Anthracite. Bed Size - 1866x2036x900

SIDE TABLE : Providing and Supplying bed side table Overall Size :Width 61cm Depth : 45.5cm Height : 50.35cm

Material :Top panel of 25 mm and Drawer fronts of 18 mm PVC membrane pressed MDF Body and drawer panels

are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC

Rupees Seven Thousand Four

edge banding. Hardware . The high quality hardware useci Iike Roller Slides , Hinges minifix, dowels is of make

164 24.00 7,401.28 Hundred One Paise TwentyEight No

Hettich.Packets . 1 packet.Finish . 18mm thick Prelaminated Particle Board is in Wenge Realistic Pore. 18 mm and

25 mm PVC membrane pressed MDF is in Colarain.The rate shall include all materials, hardware, and labour etc

complete as per instruction of engineer-in charge

Providing and Placing Double Bed Mattress ,Two pillow,bedsheet with pillow cover - 1800x1950x150mm - goldline

plus pu form 40 density 300 gsm cottan satin quilt cover.Mattress back putti made of 12mm thick prelam mdf Rupees TwentyTwo Thousand

165 12.00 bothside white finish.Kurlon dew pillow 600x400 Fill: Polyester Fibre Quality of shell fabric: 110 GSM cotton satin 22,202.83 Two Hundred Two Paise Set

patti Outer Shell Layer: Cotton Fill Weight (in gms): 650.Bedsheet with pillow 100% cotton of bombay dyeing or eq. EightyThree Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

DINING TABLE (TYPE-01) : 1500 L X 800 D X 750 HT - Providing and supply Table top made of 25mm thick Prelam Rupees Fifteen Thousand Three

166 4.00 Particle with 2mm thick pvc edge bidding finish. Under strucuture made of 40x40x1.6mm thick ms sq pipe powder 15,331.80 Hundred ThirtyOne Paise Eighty No

coated epoxy finish.Shoe cap covered pipe at bottom. Only

DINING TABLE (Type 02) : 2150 L X 800 W X 750HT - Providing and supply Table top made of 25mm thick Prelam Rupees TwentyOne Thousand

167 14.00 Particle with 2mm thick pvc edge bidding finish.Under strucuture made of 65x65x2.0mm thick ms sq pipe powder 21,487.75 Four Hundred EightySeven No

coated epoxy finish.Shoe cap covered pipe at bottom. Paise SeventyFive Only

CHAIR FOR DINING : Providing and supply MS Pipe 12 Mm Dia Rod Frame,PP Shell Made Of Virgin Polypropylene +

Rupees Two Thousand Four

Glass Filled, . Recyclable - Nylon Shoes At Frame Bottom & Chrome Plates With Anty Rust Treatment, Stackable.

168 100.00 2,497.73 Hundred NinetySeven Paise No

COLORS : RED,GREEN,YELLOW,WHITE,BLACK,GREY.

SeventyThree Only

Single Bed : Providing and Placing Single Bed – 2050mm L X 973mm W X 720mm H1 * 412 H2 mm with headboard

with combination of Tubular Steel, Particle Board and slatted mattress base with headboard. Material: Headboard

panels are made of 18 mm thick Pre laminated Particle board. All the exposed edges should be edge banded with

mm thick PVC edge banding. Bed Leg Frame Structure consists of metal frames made of M.S. 50 x 25 mm box

section in 1.2 thicknesses. Internal pipes are made of 19 x 19 mm box section in 0.9 mm thickness. Headboard

Rupees Eight Thousand Four

pipes are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress holding bkt is made of 0.6 mm CRCA

169 210.00 8,421.38 Hundred TwentyOne Paise No

SHEET Hardware: The High quality hardware should are used. Construction: Knock down construction Finish:

ThirtyEight Only

mm thick pre laminated particle board, Bed leg frame structure is powder coated in shade To thickness of

microns (+/- 10) Rest all metals are powder coated in shade to thickness of 50 microns (+/-10) The rate shall

include all materials, hardware and labour etc. complete.

SIDE UNIT : Providing & Placing side Table-440W*418D*503H mm – Storage unit of table should be made of CRCA

steel of 0.6 mm thickness. Above Stand for Bed Side Table should be of M.S. Pipe in 1.2 mm Thickness. The Glass Rupees Six Thousand Six

170 280.00 Top should be Plain Glass in 5.0 mm Thickness. Finish : Epoxy powder coated to the thickness of 50 microns (+- 10). 6,672.06 Hundred SeventyTwo Paise Six No

Providing and Placing Single Bed Mattress ,pillow,bedsheet with pillow cover ,with 12mm thick prelam mdf back-

900x1950x100mm - goldline plus pu form 40 density 300 gsm cottan satin quilt cover.Mattress back putti made of Rupees Eleven Thousand One

171 210.00 12mm thick prelam mdf bothside white finish.Kurlon dew pillow 600x400 Fill: Polyester Fibre Quality of shell 11,101.92 Hundred One Paise NinetyTwo Set

fabric: 110 GSM cotton satin patti Outer Shell Layer: Cotton Fill Weight (in gms): 650.Bedsheet with pillow 100% Only

cotton of bombay dyeing or eq.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

STUDY TABLE : Providing and Supplying study table with 25mm thik Kota Ston Top with, base 19mm Thik Plywood

all proof ( IS 710 ), Overall Size: Width- 900.0 mm Depth- 600 mm Height- +750.0 mm with Drawer as per Approved

sample and Mock up. Materiai: 25mm thik kota stone with polish finish and 19/18 mm plywood base fix adishive,

All the exposed edges are edge banded with 1 mm thick laminate edge finish. The high quality hardware useci Iike

Roller Slides (Drawer Channel, Soft Close Drawer Channel, Length - 20-inch, 35kg Capacity, 100% Extension, Strong

and Smooth Operation), Hinges minifix, dowels is of make Hettich, if required under Structure consist of metal

frames made of M.S. 25 mm Square Pipes in 0.9 mm Thickness. Drawer assembly consists of drawer made of Rupees Seven Thousand

19/18mm ply with 1.00 mm Laminate finish, The work shall be done as per the approved shop drawing (to be FiftyFive Paise EightyFive Only

prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer-in-charge.

The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved

make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall

fulfill Architect's design intent. No additional claims will be entertained for this.

STUDY CHAIR : Providing and Placing Unwind chair of 525mm W x 558mm D x 845mm H. The Seat and Back are

made up of injection mouleded high impact strength polypropylene polymer compound with indoor grade UV

resistence. Seat Size 525mmW X 532mmD and Back Size 516mm W X 405mm H. Understructure is made of tubular Rupees Three Thousand

welded frame made from dia 2.2cm ±0.03cm X 0.12cm ±0.0128cm thick and 3.5+/-0.03 cm x 1.5 ± 0.03 cm x 0.12 ± Nineteen Paise Ninety Only

0.0128 cm Stainless Steel grade 202 Tube. Tubes are buff polished to give shiny polish.

CABIN MAIN CHAIR :- Providing and Supplyins High Back Chair. SEAT/BACK A SSEMBLV: The seat is made up of

+ 0.1cm thk. hot pressed plywood measured.The Back is made up of :•nject!or mou1ded glass filled nylon and

upholstered using Mesh fabric wiih high tenacity yarn.

* SEAT SIZE : 47 0 cm. (W) x 51 5 cm (D)* BACK SIZE : 45.5 cm. (\‘V) x 65.3 cm. (H)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR po!vurethare seat foam is moulded with density 45+/-2

kg/m° and hardness 16 + 2 kgf as per IS:7888 foi 25 . ercent comor ssion.ARMRESTS : The adjustable armrest is

designeo with the following features :

• Up-Down adjustment- 8 steps (8 0+0.Scm range)• Height adjustabie armre°t structure which is Powder Coated Rupees Fourteen Thousand

174 2.00 and fitted with an armrest top. 14,136.97 One Hundred ThirtySix Paise Nos

• Fixed Armrest Top is PU moulded over metal insert.LUMBAR SiJPPORT ASSEMBLY: The Lumbar suppo consists of NinetySeven Only

polypropylene pad with moulded polyurethane foam and covered with polyester fabric.The Height of Lumbar pad

can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment

of 8.0 + 0.5 cm in height. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with

the following features. • 360” revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground

ensuring more comfon

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

• Tilt tension adjustment. • 4- position locking with anti-shock feature.• Seat/back tilting ratio of 1:2.PNEUfiJATIC

HEiGHT ADJUSTMENT The pneumatic height adjustment has an adjustment stroke o! 0.0 + 0.* cn° Pedestal

Assembly : the pedestal is injection moulded in black 30 Percent glass filled nylon end f:‹tt c! with 5 ncs. twin

wheel castors. The pedestal pitch center dia is 66.1+ 0.5 cm.TWIN WHEEL CASTORS. The twin wheel castors are

injection moulded in black Nylon.

NECKREST : The Neckrest assembly consist of polypropylene pad w'th moulded polyurethane foam and covered

with polyester fabric Neckrest is fixed to Back Assembly through Necki-est connector Neckrest assembly has

height adjusti ent of4.2 + 0.5 cm and rotation aajustment of overall-76’ + 2°. The complete neckrest assembly is

retro fit tcv the main chair.The rate shali include all materials. hardware, and labour etc complete as per

instruction of engineer-in charge.

CABIN CHAIR (FOR VISITOR): Providin.g and Supplyin .Mid Back Chair. SEAT.*B,4CK .6 SITE11BLY: The seat is made

up of 1.2 + 0 1cm thk. hot pressed p!ywood measured.The Back is made up of injection mou1ded glass filled nylon

and upholstered using Mesh fabric with high tenacity yarn * SEAT S!ZE 47 0 cm. (W) x 51 5 cm (D) ” BACK SIZE

0 cm (V'v') x 65.3 cm (H)HTGH RESILIENCE ti-iR) POLYURETHANE FOAM The HR polyurethane seat foam is

moulded with aensity 45+/-2 kg/m° and hardness 6 + 2 kgf as per IS:7888 for 25 Percent compress: 'on.ARMRESTS

. The adjustable armrest is designed with the following features

• Up-Down adjustment- 8 steps (8 010.Scm range)• Height adjustable armrest structure which is Powder Coated

and fitted with an armrest top.

• Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists

of polypropylene pad with moulded polyurethane foam and covered with polyester fabric.The Height of Lumbar

pad can be adjusted through two proiecting knobs provided on the rear side of the pa6. Lumbar pad has an Rupees Thirteen Thousand Fifty

175 6.00 adjustment of 8.0 + 0.5 cm in hei9ht FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is 13,050.21 Nos

Paise TwentyOne Only

designedwith the following features. 360° revolving type.• Single point control. • Front-pivot for tilt with feet

resting on grouna ensuring more comfort.• Tilt tension adjustment • 4- position lock.ng with anti-shock feature.

Seat/back tilting ratio of 1:2. PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an

adjustment stroke oi 10.0 z 0.3 cn°.PedestaI Assembly the pedestal is injection moulded in black 30 Percent glass

filled nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch center dia is 66.1+ 0.5 cm.TV'EIN V'EHEEL

CASTORS: The twin wheel castors are injection moulded in black Nylon.The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and Placing Desk let Chair – The seat back Shell is made of 1.2 +/- 0.1 cm, thick hot pressed plywood and

laminated with natural Veneer. Back Size – 42.0 cm (W) X 45.0 cm (H) and Seat Size – 44.0 cm (W) X 40.0 cm (D).

Wooden Arm rest made from laminated veneered Plywood with melamine finish. Tubular understructure made of

MS Tube 1.9+/- .02 cm X 0.16 cm +/- 0.0128 cm thk. And black powder coated DFT 40-60 microns. The desklet to be Rupees Five Thousand Two

176 234.00 fixed to a retractable type mechanism and made of 1.8 +/- 0.05 cm thk medium density fiberboard and membrane 5,226.75 Hundred TwentySix Paise Nos

formed with back 0.04 cm thk. PVC film. The bottom side is provided with balck backing lam. Desklet size; 34.5 +/- SeventyFive Only

0.1 cm (W) X 26.5 +/- 0.1 cm (D). The below should have paper tray made of 0.4 +/- 0.005 cm MS wire spot welded

to form a mesh. (Location : MULTI PURPOSE HALL)

Gang Chair ( 3 Seater) : Providing and Fixing 3 Seater (moulded foam seat and back In PU upholstery ) Pero Cross

Beam made of powder coated regular MS ERW tube having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/- 0.014 cm size.

Legs to be chrom plated made of rolled steel with 0.12 +/- 0.013 cm thinkness.Seat and Back Shell to be peforated

Rupees Eighteen Thousand

177 4.00 made from cold rolled M.S. Sheet (DIN 1623 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side Bar is made 18,003.25 Nos

Three Paise TwentyFive Only

of chrome Plate solid steel 3.0 cm +/- 0.03cm x 1.2 cm +/- 0.03 cm with fluting and plastic inserts. The Shell to be

assembled on the cross beam with help of M8 Bolts. (Location : Lobby Area)

Magazine Rack / New paper stand : 900(L) x350 (D) x 1200 (H) : Providing and fixing Magazine rack as per drawing

and ref image made from IS 710 ply with 1.00 mm thik laminate including all type of hardware , fittings , fixtures,

as per detailed drawing and instruction of Architect/EIC. Provding and fixing/placing Magazine Rack / New paper

stand as per detail drawing/ref.image.The work shall be done as per the approved shop drawing (to be prepared by

contractor), specifications, mock up sample approved and as directed by the Architect/EIC. The rate shall be for Rupees Seven Thousand Four

178 2.00 complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all 7,491.27 Hundred NinetyOne Paise Nos

heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design TwentySeven Only

intent. No additional claims will be entertained for this. The unit shall be manufactured in parts and these parts

shall be assembled at site. (Location : Waiting Area - GF)

FURNITURE WORK (CUSTOM MADE & MODULAR) (C)

WATER SUPPLY : Providing and fixing, in proper line and level (with necessary support like, brick masonry

pedestals and battens, if necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per

ASTM D-1785, of Astral or equivalent, Open & Conceal piping, complete, including jointing with rubbering and

airtight joints, with necessary specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), Rupees SeventyTwo Paise

reducer (single stage, double stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing SixtyFive Only

material, including testing, cutting, making good the wall, ceiling and floor etc. Testing & installation of pipe lines

as per drawing & specification. 15 mm

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing, in proper line and level (with necessary support like, brick masonry pedestals and battens, if

necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering and airtight joints, with necessary Rupees One Hundred

180 396.00 specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), reducer (single stage, double 198.97 NinetyEight Paise NinetySeven Rmt

stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, including testing, cutting, Only

making good the wall, ceiling and floor etc. Testing & installation of pipe lines as per drawing & specification.

Providing and fixing, in proper line and level (with necessary support like, brick masonry pedestals and battens, if

necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering and airtight joints, with necessary

Rupees NinetyOne Paise

181 317.00 specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), reducer (single stage, double 91.84 Rmt

EightyFour Only

stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, including testing, cutting,

making good the wall, ceiling and floor etc. Testing & installation of pipe lines as per drawing & specification.

Providing and fixing, in proper line and level (with necessary support like, brick masonry pedestals and battens, if

necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering and airtight joints, with necessary

specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), reducer (single stage, double Rupees One Hundred Nineteen

stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, including testing, cutting, Paise Fifteen Only

making good the wall, ceiling and floor etc. Testing & installation of pipe lines as per drawing & specification.

Providing and fixing, in proper line and level (with necessary support like, brick masonry pedestals and battens, if

necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering and airtight joints, with necessary

specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), reducer (single stage, double Rupees One Hundred

stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, including testing, cutting, FourtyEight Paise Twelve Only

making good the wall, ceiling and floor etc. Testing & installation of pipe lines as per drawing & specification.

Providing and fixing, in proper line and level (with necessary support like, brick masonry pedestals and battens, if

necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering and airtight joints, with necessary

Rupees One Hundred

specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), reducer (single stage, double

184 110.00 195.67 NinetyFive Paise SixtySeven Rmt

stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, including testing, cutting,

making good the wall, ceiling and floor etc. Testing & installation of pipe lines as per drawing & specification.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing, in proper line and level (with necessary support like, brick masonry pedestals and battens, if

necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering and airtight joints, with necessary

specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), reducer (single stage, double Rupees Six Hundred Seventy

stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, including testing, cutting, Paise SixtyFour Only

making good the wall, ceiling and floor etc. Testing & installation of pipe lines as per drawing & specification.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making Rupees One Hundred SixtySix

good the wall, ceiling and floor etc. complete. All Conceal Pipe line Cold & Hot Water 15 mm Paise EightySix Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making

187 53.00 205.00 Rupees Two Hundred Five Only Rmt

good the wall, ceiling and floor etc. complete. All Conceal Pipe line Cold & Hot Water 20 mm

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

Rupees Two Hundred

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making

188 158.00 249.72 FourtyNine Paise SeventyTwo Rmt

good the wall, ceiling and floor etc. complete. All Conceal Pipe line Cold & Hot Water 25 mm

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making Rupees Three Hundred

good the wall, ceiling and floor etc. complete. All Conceal Pipe line Cold & Hot Water 32 mm ThirtyThree Paise SixtySix Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making

190 22.00 606.00 Rupees Six Hundred Six Only Rmt

good the wall, ceiling and floor etc. complete. All Conceal Pipe line Cold & Hot Water 40 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved

make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in- Rupees One Thousand Two

charge for water supply lines of the following Nominal bore (NB) size: 15 mm Hundred Twelve Only

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved

make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in- Rupees One Thousand Five

charge for water supply lines of the following Nominal bore (NB) size: 20 mm Hundred Fifteen Only

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved

make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in- Rupees One Thousand Eight

charge for water supply lines of the following Nominal bore (NB) size: 25 mm Hundred Eighteen Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved

Rupees Two Thousand Seven

make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-

194 4.00 2,777.50 Hundred SeventySeven Paise Nos.

charge for water supply lines of the following Nominal bore (NB) size: 32 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved

Rupees Three Thousand Five

make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-

195 4.00 3,595.60 Hundred NinetyFive Paise Sixty Nos.

charge for water supply lines of the following Nominal bore (NB) size: 40 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved

Rupees Four Thousand Eight

make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-

196 4.00 4,898.50 Hundred NinetyEight Paise Fifty Nos.

charge for water supply lines of the following Nominal bore (NB) size: 50 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved

Rupees Six Thousand Six

make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-

197 2.00 6,645.80 Hundred FourtyFive Paise Nos.

charge for water supply lines of the following Nominal bore (NB) size: 65 mm

Providing, fixing, jointing and testing, heavy Quality Gun metal or brass Non return valve confirming to IS 778, with

Rupees Four Thousand Eight

198 1.00 screwed / flanged ends, 20 Kg/m2 of approved make, on water supply lines of the following Nominal bore (NB) 4,848.00 Nos.

Hundred FourtyEight Only

Providing, fixing, jointing and testing, heavy Quality Gun metal or brass Non return valve confirming to IS 778, with

Rupees Three Thousand Thirty

199 1.00 screwed / flanged ends, 20 Kg/m2 of approved make, on water supply lines of the following Nominal bore (NB) 3,030.00 Nos.

Providing, fixing, jointing and testing, heavy Quality Gun metal or brass Non return valve confirming to IS 778, with Rupees Two Thousand Four

200 1.00 screwed / flanged ends, 20 Kg/m2 of approved make, on water supply lines of the following Nominal bore (NB) 2,489.65 Hundred EightyNine Paise Nos.

size: 40 mm SixtyFive Only

INTERNAL DRAINAGE : Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes - Ring Fit & Self

Fit, Supreme or equivalent make, Confirming to IS 13592 & Fitting confirming to IS 14735 for waste water or soil

waste pipe, with necessary specials, bends, such as `Y' junction, `T' junction (both single and double), including

plugs, shoes, cowls, flange compression type fittings, wall clips, in proper line and level with necessary support like

Rupees Eight Hundred

brackets/clamps, clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, open or concealed

201 11.00 834.38 ThirtyFour Paise ThirtyEight rmt

complete jointing with rubberising and airtight joints, with ‘T’ shaped rubber ring, etc., and lubricant or jointing

material, including testing, cutting, making good the wall, ceiling and floor, etc. Testing & installation of pipe lines

as per drawing & specification. 160 mm. (Soil + Waste + Rain Water) - Type B

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes - Ring Fit & Self Fit, Supreme or

equivalent make, Confirming to IS 13592 & Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and double), including plugs, shoes, cowls,

flange compression type fittings, wall clips, in proper line and level with necessary support like brackets/clamps,

Rupees Eight Hundred FiftySix

202 385.00 clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, open or concealed complete jointing 856.03 rmt

Paise Three Only

with rubberising and airtight joints, with ‘T’ shaped rubber ring, etc., and lubricant or jointing material, including

testing, cutting, making good the wall, ceiling and floor, etc. Testing & installation of pipe lines as per drawing &

specification. 110 mm. (Soil + Waste + Rain Water) - Type B

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes - Ring Fit & Self Fit, Supreme or

equivalent make, Confirming to IS 13592 & Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and double), including plugs, shoes, cowls,

flange compression type fittings, wall clips, in proper line and level with necessary support like brackets/clamps,

clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, open or concealed complete jointing Rupees Two Hundred Eighty

with rubberising and airtight joints, with ‘T’ shaped rubber ring, etc., and lubricant or jointing material, including Paise TwentyThree Only

testing, cutting, making good the wall, ceiling and floor, etc. Testing & installation of pipe lines as per drawing &

specification. 75 mm. - Balcony + Standing Balcony + AC Drain - PVC 10 KG

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes - Ring Fit & Self Fit, Supreme or

equivalent make, Confirming to IS 13592 & Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and double), including plugs, shoes, cowls,

flange compression type fittings, wall clips, in proper line and level with necessary support like brackets/clamps,

Rupees One Hundred

clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, open or concealed complete jointing

204 21.00 127.36 TwentySeven Paise ThirtySix rmt

with rubberising and airtight joints, with ‘T’ shaped rubber ring, etc., and lubricant or jointing material, including

testing, cutting, making good the wall, ceiling and floor, etc. Testing & installation of pipe lines as per drawing &

specification. 40 mm for waste water for Sink - PVC 10 KG

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes - Ring Fit & Self Fit, Supreme or

equivalent make, Confirming to IS 13592 & Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and double), including plugs, shoes, cowls,

flange compression type fittings, wall clips, in proper line and level with necessary support like brackets/clamps, Rupees One Hundred

205 103.00 clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, open or concealed complete jointing 121.97 TwentyOne Paise NinetySeven rmt

with rubberising and airtight joints, with ‘T’ shaped rubber ring, etc., and lubricant or jointing material, including Only

testing, cutting, making good the wall, ceiling and floor, etc. Testing & installation of pipe lines as per drawing &

specification. 32 mm for waste water for Wash basin - PVC 10 KG

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing, fixing, jointing and testing IS 14735 for Drain PVC SWR 'P' - traps of self cleansing design with water seal

not less than 50 mm., with or without vent, cutting chases / hole in floors / slabs and bringing the same in proper

condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the

206 152.00 606.00 Rupees Six Hundred Six Only

trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be 'P' type, of following

sizes: 110 x 110 mm OD inlet / outlet

Providing and fixing Heavy class S.S. grating with Mosquito proof S.S. strainer of Chilly or equivalent make, as

Rupees Four Hundred Nineteen

207 152.00 approved, (cockroach trap) including setting in floor with cement mortor to match with floor finish as per 419.15 no

Paise Fifteen Only

architect requirements.

Providing and fixing, PVC cowl, on C.I / PVC ventilating pipes and verticals for soil, waste and rain water Pipes at Rupees Five Hundred One Paise

top level / terrace level, as specified and required, etc. complete. 110 OD PIPE EightySeven Only

Providing and fixing, PVC cowl, on C.I / PVC ventilating pipes and verticals for soil, waste and rain water Pipes at Rupees Three Hundred

209 88.00 top level / terrace level, as specified and required, etc. complete. 75 OD 389.74 EightyNine Paise SeventyFour no

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal Rupees Five Hundred

210 92.00 diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making 585.37 EightyFive Paise ThirtySeven no

good the walls. (for Balcony) Only

EXTERNAL DRAINAGE : Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

Rupees Three Hundred FiftySix

211 275.00 pressure pipes I.S., class NP2 of the following internal diameter with collars and butt ends prepared for collar joints 356.73 rmt

Paise SeventyThree Only

including testing, of joints complete. 250mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S., class NP2 of

Rupees Two Hundred FiftyFour

212 33.00 the following internal diameter with collars and butt ends prepared for collar joints including testing, of joints 254.89 rmt

Paise EightyNine Only

complete. 150 mm

Providing, fixing, jointing and testing salt glazed stoneware Gully trap, class `A', including excavation in all soil

types, bailing or pumping out water from trenches, shoring whenever necessary testing,refilling, in layers ramming

& consolidation, removing away the surplus earth & spoils, dumping it on site or carting away to lead of

meters as directed, incl. embedding the trap in CC 1:2:4, construction of brick masonry chamber, internal clear size

300 mm. x 300 mm., in brick work 230 mm. thick, in CM 1:4, plastering inside, outside and all exposed surfaces Rupees Three Thousand Eight

213 25.00 with CM 1:3, 12 mm. thick, with 300 x 300mm Gully trap chamber & providing, fixing CI frame and cover 300 x 300 3,806.53 Hundred Six Paise FiftyThree no

mm., weighing together not less than 12.5 Kg., painting of all CI items with 3 coats of approved bitumastic paint, Only

etc. Complete.of the following diameter size:

salt glazed stoneware gully trap, class `A', of 150 mm. dia. inlet and 150 mm. outlet,

Cast iron cover 300 x 300, Gully trap Brick chamber 300 x 300 x

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Constructing Inspection chamber 450 x450 x 600 mm clear size in 230 mm thick brick masonry with cement mortar

(1:5) as per ISI with 150 mm thick 1:3:6 P.C.C. bedding, necessary benching in concrete (M-15) and 20 mm thick Rupees Two Thousand Five

214 15.00 smooth cement plaster (1:4) from inside, C.I. steps as necessary and rough cement plaster 20 mm thick in c.m. 1:4 2,545.86 Hundred FourtyFive Paise no

outside, with 50 kg. Full size C.I. manhole cover and frame (Approved Make) including all excavation in all soil EightySix Only

types, refilling sides in layers with selected earth ramming and consolidating, removing away surplus soil or

dumping it on site as directed (Depth upto 1500 mm to invert).

Extra over and above item no. beyond 1.5 m. depth, for every additional depth of 0.1 m. or part thereof, for brick

Rupees Three Hundred

215 2.00 masonry Inspection chamber. 325.59 no

TwentyFive Paise FiftyNine Only

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.

Rupees Seven Thousand One

) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

216 15.00 7,180.44 Hundred Eighty Paise no

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

FourtyFour Only

cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm and 450mm deep for

pipe lines with three or more inlets.

Extra over and above item no. beyond 1.5 m. depth, for every additional depth of 0.1 m. or part thereof, for brick

Rupees Three Hundred

217 15.00 masonry Inspection chamber. 325.59 no

TwentyFive Paise FiftyNine Only

Providing and fixing CI Cover manhole frame and cover 455 x 610, light / medium / heavy weight,Circular /

rectangular tested as per IS:1726 for load bearing.The cover is to be provided with a 5mm thick high abrasion

Rupees Nine Hundred SixtyFive

218 15.00 surface.The cover is to be of double seal type with SS 316 Socket type key hole lifting / Rod lifting arrangement . 965.49 no

Paise FourtyNine Only

The lifting arrangement is to be closed from the bottom side. etc. complete as directed by E-I-C.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of neat

cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm

Rupees Eleven Thousand

nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M.

219 12.00 11,042.74 FourtyTwo Paise SeventyFour no

deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than

kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand)(1) A type depth

0.90 Metre for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over item No.24.27 Rupees Five Hundred

220 2.00 (I) for depth from 0.9M to 1.5M. 522.96 TwentyTwo Paise NinetySix no

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

UTILITY ITEMS : S.I.T.C. submersible pump set for bore of 200 mm. dia. or more having 3 phase motor capacity Rupees One Lakh Seventeen

221 2.00 about 50-55 H.P discharge capacity having . Lifting and Lowering taken extra. 1,17,502.39 Thousand Five Hundred Two no

(A) ( 13 Stage) 100 to 400 L.P.M. discharge at the head 182 to 265 mtrs. suitable for 80 mm dia. Delivery pipe Cat.III Paise ThirtyNine Only

Installing, testing and commissioing of Pump system comprising of horizontal Submersible Pumps with SS casing,

SS impeller, SS Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm speed and shall be

supplied with all accessories viz., base plate, coupling, motor, VFD based control panel, dry run & overload Rupees Sixty Thousand Six

protection, cabling up to panel, earthing, GI medium duty suction, delivery & header pipes, pressure gauge, Hundred Only

pressure switches, pressure transmitter, suction ball valves & delivery ball valves & check valves etc., complete.

400 lpm., 50 mtr., (To GROUND FLOOR TO TERRACE TANK) FOR DOMESTIC WATER

Supply, installation, testing & commissioning of Water level controller for the OH tanks with switches, hardwares, Rupees Ten Thousand One

interlocking with panel, etc. For Under Ground tank & OH Tank Hundred Only

Constructing masonry Soak well with mesonery work bottom side 6'' PCC work, with minimum 9'' thik brick wall

Rupees One Lakh FourtyFive

with 30% opening in wall area, with Top side 6'' RCC Slab, 400x400 Inspection chamber, top side with FRP cover

224 1.00 1,45,187.50 Thousand One Hundred SET

fitting, 110mm Air vent line. Dia 3.0 Meter x 6 meter Depth

EightySeven Paise Fifty Only

PLUMBING WORK (D)

Electric Motor Driven Hydrant Pump : Supplying,Installing, testing and commissioning of Fire authority approved

Electrical driven fire pump suitable for automatic/ manual operation consisting of the following-Rates for erection

i) Horizontal split casing, high pressure, single/ multistage centrifugal type fire pump having cast iron body, bronze

impeller,stainless steel shaft & capable of delivering 1680 LPM against a total head of 60 Mtr while running at

2900 RPM complete with proper connection to suction and delivery line, and including bypass arrangement for

testing of pumps as per the requirement. Suitable mechanical seal with mounting aggangement shall be included,

having a name plate indicating suction, delivery, head, discharge, stages, RPM and direction of rotation. Y Stainers Rupees One Lakh EightyOne

at pump input shall be provided as per manufacturer requirements. Thousand Eight Hundred Only

Pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65 % of rated

head. The shut off head shall not exceed 120% of rated head.

ii) Squirrel cage, induction motor, TEFC type suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply, of suitable HP

rating for the above pump with synchronous speed of 2900 RPM conforming to IP 55 protection & class 'F'

insulation. The motor shall conform to IS 325 1978 (up to date) with flexible coupling and coupling guard .With

Pressure Guage and Pressure switch.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

iii) Factory Fabricated Common base plate for mounting pump and motor fabricated of mild steel channel as per

manufacturer's recommendation with heavy duty Anti Vibration pads (4 Nos., heavy duty). Grouting bolts to be

provided and installed by vendor at his cost

iv) Flexible Coupling and coupling guard for direct coupling of pump and motor.

Drain Pipe with Valve,

Main Fire Pump,

Discharge : 1680 LPM

Pumping Head : 60 M

Pump Size : 40 HP

Rate should included interconnection cables and Cable box if reqd for cable conn. to motor.

Electrical Motor Driven Jockey Pump For Hydrant System Location - Plant Room-Rates for erection of pump only :

Supplying,Installing, testing & commissioning of fire authority approved electrically driven Jockey pump suitable

for automatic/manual operation consisting of the following:

Horizontal / Vertical mounted multistage jockey pump having cast iron body, S.S. impeller, stainless shaft with

mechanical seal capable of delivering 600 LPM against total head of 60Mtr while running at 2900 RPM complete.

The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side

including bypass arrangement for testing of working of the pumping set as required. The pump should meet the

Rupees SeventyTwo Thousand

226 1.00 requirement of IS 15105:2002 and must be approved by the local fire authority. Y-Stainers at pump input shall be 72,720.00 set

provided as per manufacturer requirements. Seven Hundred Twenty Only

Squirrel cage induction motor suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the

above pump with synchronous speed of 2900 RPM T.E.F.C type connected to pump with flexible coupling and

coupling guard.

With Pressure Guage and Pressure switch.

Factory fabricated Common base plate for mounting pump and motor fabricated of mild steel channel as per

manufacturer's recommendation with heavy duty 4 Nos. Anti Vibration pads.(Cushy foot) . grouting bolts to be

provided and installed by the vendor at his cost

Suitable reinforced cement concrete pump foundations as per manufacturer's design including foundation bolts,

washers as required.

Drain pipe with valve (25 mm dia) -

Discharge : 600 LPM

Pumping Head : 60 MTR

Pump Size : 10 HP

Rate shall include inter connecting cables and cable box if reqd for cable conn to motor

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying, Installation, Testing and commissioning of Diesel engine driven fire pump suitable for automatic

operation and consisting of following: Horizontal type, centrifugal End Suction pump of cast iron body & bronze

impeller , mechanical seal to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at

specified flow of 1680 LPM@ 60M. head conforming to IS 1520. with M.S.fabricated common base plate, coupling, Rupees Three Lakh FourtyEight

227 1.00 coupling guard, foundation bolts etc. as required 3,48,450.00 Thousand Four Hundred Fifty set

Diesel Fire Pump Only

Discharge : 1680 LPM (30 LPS) / 108 m3/hr

Pumping Head : 60 M

Pump Size : 40 HP

Fire pump panel (Combined for All Pumps) and electrical works - Starter panel with star delta or as per CFO

approved starters rated to suite pump HP with necessary protection feautres like SPP / ELR / OL / SC / phase and

on off indicating lamps. The busbars shall be of Al - 0.8 A / sq mm size. Panel shall be fabricated from 14G sheet

steel with seven tank process powder coated and shall be min IP 52. Panel shall have Ammeter / Voltmeter and

KWh meter. Cabling / earthing from panel to pump shall be scope of vendor without any extra cost. Cabling -

supply / laying and terminating, shall be Al XLPE armoured / Cu XLPE armoured / as per manufacturers

Rupees Two Lakh TwentyTwo

228 1.00 specifications with necessary terminal box to terminate the cables. Panel shall be rated min for 25KA fault level. 2,22,200.00 Each

Cable trays - hot dip GI ladder type 16 gauge with required supports shall be used for cabling. Panel shall have one Thousand Two Hundred Only

incomer MCCB / ACB of required rating where by incoming supply and earthing shall be terminated by electrical

contractor.Starters shall be suitable for respective motors.panel to take inputs from pressure switch/on-off switch

. Flow switch wiring shall be in suitable mms pvc consuits. Panel should be manufactured by CPRI approved panel

Supplying,Installing, testing & commissioning of dial type Pressure Guage having 100 mm dial & range of 0-15 Rupees Two Thousand One

229 2.00 Kg/cm2 with syphon and cock. 2,151.30 Hundred FiftyOne Paise Thirty Each

Supplying,Installing, testing & commissioning of Pressure Switch required accessories Rupees Two Thousand Twenty

Rupees Four Thousand Eight

231 2.00 Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete 4,848.00 Each

Hundred FourtyEight Only

with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 150 mm dia

Rupees Four Thousand Four

232 9.00 Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete 4,444.00 Each

Hundred FourtyFour Only

with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 100 mm dia

Rupees Three Thousand Eight

233 9.00 Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete 3,838.00 Each

Hundred ThirtyEight Only

with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 80 mm dia

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Rupees Three Thousand Eight

234 2.00 Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete 3,838.00 Each

Hundred ThirtyEight Only

with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 50 mm dia

Supplying,Installing, testing & commissioning of CI dual plate non-return valve of following sizes conforming to IS:

Rupees Five Thousand Two

235 2.00 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 150 mm dia. 5,252.00 Each

Hundred FiftyTwo Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

Rupees One Thousand Four

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including

236 341.00 1,424.10 Hundred TwentyFour Paise Ten Mtr.

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and

testing after Installation etc. as per specifications complete as required. 150 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

Rupees One Thousand Two

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including

237 88.00 1,232.20 Hundred ThirtyTwo Paise Mtr.

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and

testing after Installation etc. as per specifications complete as required. 100 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Nine Hundred

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and FourtyNine Paise Fourty Only

testing after Installation etc. as per specifications complete as required. 80 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Seven Hundred

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and Seventeen Paise Nine Only

testing after Installation etc. as per specifications complete as required. 65 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Five Hundred

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and EightyFive Paise Eighty Only

testing after Installation etc. as per specifications complete as required. 50 mm

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

Rupees Four Hundred

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including

241 66.00 494.89 NinetyFour Paise EightyNine Mtr.

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and

testing after Installation etc. as per specifications complete as required. 40 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

Rupees Four Hundred

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including

242 429.00 449.45 FourtyNine Paise FourtyFive Mtr.

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and

testing after Installation etc. as per specifications complete as required. 32 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Two Hundred FiftyTwo

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and Paise Fifty Only

testing after Installation etc. as per specifications complete as required. 25 mm

Supply, Installation, Testing and Commissioning of Weather proof Standard Fire Hose Cabinet wall mounting type

Rupees One Thousand Eight

244 9.00 (450 mm x 600 mm x 250 mm deep) having single or double opening with necessary locking arrangement by allan 1,818.00 Each

Hundred Eighteen Only

key suitable for housing 1 nos. hose pipe, 1 no. Branch pipe & nozzle spanner.

Supply ,installation, testing and commissioning S.S. Single Headed Fire Hydrant Valve with 80mm N.B. flanged

inlet, 63 mm dia female instantaneous outlet type. S.S. coupling, blankcap, chain, twist release type lug & all Rupees Three Thousand Thirty

accessories Conforming to IS:5290. Including fixing with supports, flanged tapping from wet riser,orifice plate Only

complete as required by the Local Fire Authority.

Supply, installation, testing and commissioning non-percolating rubber reinforced lined fire Hose pipe (as per Rupees Three Thousand Two

IS:903) of 63 mm dia and 15 mtrs long. Hundred ThirtyTwo Only

Rupees Eight Hundred Eight

247 9.00 Supply, Installation, Testing and commissioning of 63 mm dia instantaneous pattern aluminium short branch pipe 808.00 Each

Supply, installation, testing and commissioning of First Aid Hose Reel equipment conforming to IS:884 comprising

of hose reel drum, 8 mm shut off nozzle, Rubber hose reel tubing as per IS: 444 of 25 mm dia x 45 mtr. long, Rupees Four Thousand One

painting, Manual fix type with fixing bracket, anchor fastener, bolts & nuts etc. complete as required by Local Fire Hundred FourtyOne Only

Rupees Eight Hundred Eight

249 9.00 Supply, installation, testing and commissioning of SS Ball Valve. (a) 25mm dia 808.00 Each

Supplying, fixing, testing and commissioning of 2 way fire brigade connection of cast iron body with 2 nos. SS

Rupees Three Thousand Thirty

250 1.00 instanteneous inlet couplings complete with cap and chain as required for 150 mm dia MS pipe connection, 3,030.00 Each

conforming to IS 904 as required.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Rupees Four Thousand Eight

251 1.00 Supply, installation, testing and commissioning of Cast lron Four Way Fire Brigade Inlet as per IS:904 having 63 mm 4,848.00 Each

Hundred FourtyEight Only

dia inlet with blank cap and chain with necessary fittings, flanges, nut bolts etc. complete as required.

Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve with necessary fittings. Size:

Rupees Three Thousand Five

252 2.00 mm (For Riser) 3,535.00 Each

Hundred ThirtyFive Only

Supply, Installation, Testing and commissioning of Quartzoid Bulb type Sprinkler Heads. Rupees Three Hundred

(a) Pendent Sprinkler 57°C - standard response FiftyThree Paise Fifty Only

Rupees One Thousand Four

254 9.00 Supply, installation, testing and commissioning of ABC type Fire Extinguisher of 6.0 kg confirm to IS:15683, with ISI 1,424.10 Hundred TwentyFour Paise Ten Each

marked / TAC approved fitted with required accessories including wall suspension brackets. Only

Supply, installation, testing and commissioning of Carbon Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to

Rupees Three Thousand Eight

255 9.00 IS:15683, with ISI marked / TAC approved fitted with required accessories including wall suspension brackets. 3,838.00 Each

Hundred ThirtyEight Only

Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and Rupees Three Hundred

specification consisting of following items Pump On / Off switch: FiftyThree Paise Fifty Only

4 core 1.5 sq.mm cu. Flexinble wire with pvc pipe & hardware for pump on/off switch

257 330.00 202.00 Rupees Two Hundred Two Only Each

Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.)

including cutting to size, drilling, welding, including cost of fasteners, clamps in RCC structural members as

Rupees One Hundred Six Paise

258 30.00 directed, including two or more coats of synthetic paint over one coat of primer after surface preparation including 106.04 kg

cutting and making good walls (Structural other than pipe supoort).

Painting of above ground lines with two coats of red oxide primer and two coat of sinthetic enamal paint (PO.Red) Rupees Seven Hundred Seven

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Rupees Two Hundred FiftyTwo

Fire Hydrant: 4" X 12" Paise Fifty Only

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Rupees One Hundred FiftyOne

"DCP" Extinguisher: 8" X 4" Paise Fifty Only

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Rupees One Hundred FiftyOne

"CO2" Extinguisher: 8" x 4" Paise Fifty Only

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: In case of Fire, do not use lift, use Rupees Three Hundred

staircase: 8" x 8" FiftyThree Paise Fifty Only

FIRE FIGHTING SYSTEM (E)

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC /

Rupees Four Hundred

264 741.00 Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules 485.81 Pt.

EightyFive Paise EightyOne Only

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden

Rupees One Hundred

265 963.00 box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp 167.66 Pt.

SixtySeven Paise SixtySix Only

holder / ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity

Rupees Six Hundred

of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with

266 216.00 674.68 SeventyFour Paise SixtyEight Pt.

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

Rupees Five Hundred Ten Paise

267 537.00 erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 a switch 510.05 Pt.

with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules Rupees Eight Hundred

268 119.00 erected on / in wall / ceiling as per pipe erected with following type of accessories [III] For 16A Plug and 16 amp 871.63 SeventyOne Paise SixtyThree Pt.

switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.. (f) with medium class Only

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Rupees Two Hundred

269 55.00 Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules 257.55 Pt.

FiftySeven Paise FiftyFive Only

erected on / in wall / ceiling with following type accessories. Cat-III

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

.ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting

Rupees Six Hundred Three

270 20.00 base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe 603.98 Pt.

Paise NinetyEight Only

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat-III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate , modules erected with necessary connections as Rupees TwentyFive Paise

per site situation directed by Engineer In charge. Blank Plate Single TwentyFive Only

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with Rupees ThirtyThree Paise

following dia of pipes, in approved manner as directed. ThirtyThree Only

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees SixtyTwo Paise

PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC SixtyTwo Only

pipe and accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees EightyTwo Paise

PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC EightyTwo Only

pipe and accessories (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated Rupees One Hundred Twelve

stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and Paise Eleven Only

accessories (a) 2 wire 4 sq. mm

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections as directed

Rupees One Thousand One

1 no. 6A/16A universal plug-switch combined.

276 2.00 1,133.22 Hundred ThirtyThree Paise Ea.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Lighting Fixtures ,Fan & other items : Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Rupees Two Hundred Twenty

277 212.00 Luminaire efficacy> 85 lumens/watt , 220.18 Ea.

Paise Eighteen Only

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Square/

Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KVcat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted

body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

Rupees Five Hundred

CCT 3000 K to 6500K,

278 1399.00 589.84 EightyNine Paise EightyFour Ea.

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Square/

Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV cat-III

Supplying and erecting LED tube light/ Ultra slim 4 ft aluminium batten a) 40w e26 LED tube light Rupees Nine Hundred FiftyNine

Paise Fifty Only

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Rupees Five Hundred ThirtyFive

280 31.00 Luminaire efficacy> 85 lumens/watt ,LED 535.30 Ea.

Paise Thirty Only

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Tube Light

with integral driver, (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

Rupees Eight Thousand Four

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

281 9.00 8,453.70 Hundred FiftyThree Paise Ea.

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (v) above 120 to 160 watts Cat-lll

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick

box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per

Rupees Five Hundred Fifteen

282 9.00 requirement having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on 515.10 Ea.

pole with cable clamps& earth bolt of following size of box. (B) 250mm x 200mm x 100mm [deep]

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less

Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades,

nos. canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with Rupees Two Thousand Eight

283 216.00 remote unit for Speed Control and all remaining accessories including safety pin, nut bolts, washers, temperature 2,885.57 Hundred EightyFive Paise Ea.

rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and FiftySeven Only

overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall be approved

by Engineer in Charge] (B) 1200 mm Sweep (48")

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan Rupees One Hundred Eight

complete with proper insulation without leakage and earthing. Paise Seven Only

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each

Rupees One Hundred Eight

285 216.00 side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with 108.07 Ea.

Paise Seven Only

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Rupees Eighteen Paise Eighteen

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt Rupees One Thousand Seven

287 46.00 lowers & square frame.For 200mm with 1350 RPM cat-ii 1,703.87 Hundred Three Paise Ea.

EightySeven Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 Rupees Six Thousand

288 26.00 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description 6,088.28 EightyEight Paise TwentyEight Ea.

have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity Only

between the ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (iii) Above 60 to 90 watts Cat-lll

Street Light poles & other items : Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 4 mtr. Rupees Three Thousand Two

289 26.00 Long duly painted with two coats of aluminium paint complete with metallic base plate of 300 mm x 300 mm x 3,225.94 Hundred TwentyFive Paise Ea.

4mm thick for using as a compound light pole with approx. weight 32 Kg. NinetyFour Only

Supplying and erecting Pole base suitable for following size of pole fabricated from 4 mm. Thick M.S. sheet with

M.S.door having two hinges welded on M.S. flat 25 x 3 mm which is fitted on M.S..base by bolts welded inside the Rupees Two Thousand Two

290 26.00 pole base erected with one coat of Red oxide and two coats of Aluminium paint. Outside dimension as per SOR. 2,269.47 Hundred SixtyNine Paise Ea.

drawing. (A) Suitable for 90 mm.dia base of pole FourtySeven Only

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick

box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per

Rupees Eight Hundred

291 26.00 requirement having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on 898.90 Ea.

NinetyEight Paise Ninety Only

pole with cable clamps& earth bolt of following size of box. (A) 300mm x 200mm x 100mm [deep]

Providing and erecting street light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia.

complete with suitable B Class G.I sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with

Rupees Six Hundred Fourteen

292 26.00 suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted 614.08 Ea.

Paise Eight Only

with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of

[a] Single Arm bracket 1 Mtr

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating

Rupees Three Thousand One

contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching.

293 1.00 3,168.37 Hundred SixtyEight Paise Ea.

Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required

ThirtySeven Only

with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction Cat III (D) 4 pole Rupees Two Thousand Seven

294 1.00 440V 40 Amp. 2,782.55 Hundred EightyTwo Paise Ea.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Panel & Switchgear : Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & Rupees Six Thousand One

295 12.00 magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & 6,173.12 Hundred SeventyThree Paise Ea.

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Twelve Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

Rupees Sixteen Thousand Two

KA. at 415 V. having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on

296 4.00 16,221.61 Hundred TwentyOne Paise Ea.

A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing

G.M.S.housing. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

KA. and above at 415 V. having normal current rating 250A. with variable thermal & magnetic release suitable to Rupees Twenty Thousand Nine

297 4.00 work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 20,946.39 Hundred FourtySix Paise Ea.

G.M.S. housing. ICS=100% of ICU only Cat III ThirtyNine Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

Rupees TwentyEight Thousand

KA and above at 415 V having Normal current rating 400A. with variable Thermal & magnetic release suitable to

298 2.00 28,173.95 One Hundred SeventyThree Ea.

work on A.C.supply 50 c/s. With all internal connections, spreader tinned copper & complete erected in existing

Paise NinetyFive Only

G.M.S. housing.

Supply of Approved make Iron Clad or metal clad four pole change over switch 415V. confirming to IS of following Rupees TwentySix Thousand

299 1.00 capacity (B) 400 A Cat-lll 26,106.48 One Hundred Six Paise Ea.

FourtyEight Only

PANEL MOUNTING BUSBARS : Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium

Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross

Rupees Two Thousand Two

section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity,

300 10.00 2,204.83 Hundred Four Paise EightyThree Rn.Mtr

erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical

panel with necessary connections. (D) Suitable for 400 Amp. capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos.

of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped

Rupees One Thousand Four

with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus

301 20.00 1,469.55 Hundred SixtyNine Paise Rn.Mtr

bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary

(C) Suitable for 300 Amp. capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos.

of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped

Rupees One Thousand

with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus

302 30.00 1,037.27 ThirtySeven Paise TwentySeven Rn.Mtr

bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary

(B) Suitable for 200 Amp. capacity

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to

Rupees Five Thousand Four

following size of moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip

303 1.00 5,415.62 Hundred Fifteen Paise SixtyTwo Ea.

220V AC. with all internal connections & complete erected in existing M.S.housing.. (3) 250 A -400 A , CT Ratio

Providing & erecting 415 V MCB Four pole switch for motor & Inductive Load (C curve) having 10 KA breaking

Rupees Seven Hundred

304 22.00 capacity & confirms to IS : 8828 in existing M.S box having following capacity: 737.30 Ea.

ThirtySeven Paise Thirty Only

(c) 63 Amp. Cat- III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking Rupees Two Hundred

305 119.00 capacity & confirms to IS : 8828 in existing box having following capacity 299.97 NinetyNine Paise NinetySeven Ea.

(A) 6-32 Amp. CAT-iii Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking

Rupees Three Hundred Thirty

306 3.00 capacity & confirms to IS : 8828 in existing box having following capacity 330.27 Ea.

Paise TwentySeven Only

(B) 40 Amp. CAT-iii

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of Rupees Two Thousand Two

307 20.00 quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. 2,235.13 Hundred ThirtyFive Paise Ea.

rating erected as directed Thirteen Only

(ii) 40Amps. DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of Rupees Two Thousand Six

308 7.00 quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. 2,654.28 Hundred FiftyFour Paise Ea.

rating erected as directed TwentyEight Only

(iii) 63 Amps. DP

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system

Rupees One Hundred Twelve

309 647.00 and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark .Cat.III 112.11 Ea.

Paise Eleven Only

(3 ph DB + LDB)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

Rupees Eight Hundred

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single

310 85.00 885.77 EightyFive Paise SeventySeven Ea.

phase incoming and horizontal single phase outgoing.

(b) sheet steel double door (IP43) (ii)6- way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house Rupees One Thousand One

311 7.00 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single 1,152.41 Hundred FiftyTwo Paise Ea.

phase incoming and horizontal single phase outgoing. b) sheet steel double door (IP43) (iii) 8 way FourtyOne Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house Rupees Two Thousand Nine

312 1.00 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three 2,913.85 Hundred Thirteen Paise Ea.

phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double EightyFive Only

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house Rupees Three Thousand Eight

313 9.00 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three 3,874.36 Hundred SeventyFour Paise Ea.

phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double ThirtySix Only

door (iv)12 way

Cupboards : Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above protection as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied

switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber Rupees Fourteen Thousand

314 15.00 grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - 14,902.55 Nine Hundred Two Paise Sq.Mtr

bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty FiftyFive Only

end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (B) The standard companies switch gear shall be used and only manufacturers

at CPRI approved factory (i) with 350mm depth

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, Rupees Fourty Thousand Nine

315 3.00 bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base 40,999.94 Hundred NinetyNine Paise Sq.Mtr

Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end NinetyFour Only

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating. (B) The standard companies switch gear shall be used and only manufacturers at CPRI

approved factory (iv) with 1000 mm. depth

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly Rupees SeventySeven Paise

painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary SeventySeven Only

grouting, cementing, plastering & finishing complete.

Lightning Arrester : SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air

Rupees Nine Thousand Four

Termination Base tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of

317 2.00 9,416.23 Hundred Sixteen Paise Ea.

10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with

TwentyThree Only

MAST 34mm dia 3000 mm long- Cold Galvanized

SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested and use exclusively for lightning

protection (Vertical Riser/Down Conductor which shall be concealed in Column OR Flushed on) to meet the

requirement of IS IEC 62305 With Accessories - Earthing stud of dimension SS-75mm OD plate with 10mm dia tail

connector used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (For

Interconnecting the Column and the Terrace AL Conductor / Strip/Flat), SS Cross Connector to connect Earth fixing

Rupees Seven Hundred

point to vertical raiser/Down conductor, SS Straight Splicer at every 4 Mtr to connect MS conductor in column,

318 100.00 728.21 TwentyEight Paise TwentyOne Mtr.

Bonding /Rebar Clamp at every 3 mtr suitable for interconnecting round conductor with reinforcement inside the

concrete for structural earthing system, SS connector -To connect external conductor 8- 10 mm with earth fixing

point. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for

Lightning impulse current withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical test )

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding &

bag of Carbon fill Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and Rupees Five Thousand Nine

319 4.00 suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth 5,992.33 Hundred NinetyTwo Paise Per set

Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height). ThirtyThree Only

Earthing : Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of applications with chamber and

heavy duty cover (A)(approved make OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane Rupees Ten Thousand Five

320 10.00 mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 10,593.89 Hundred NinetyThree Paise Ea.

0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- EightyNine Only

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency. (c) For Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in

Length of Pipe : 3.00 mtrs Back filling Compound :2 nos Bags of 25 Kg.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Cables : Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

Rupees Two Hundred Twenty

321 88.00 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (B) 3 1/2 core 220.18 Mtr.

Paise Eighteen Only

35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be Rupees Three Hundred

322 50.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables (D) 3 1/2 core 70 Sq. mm 378.75 SeventyEight Paise SeventyFive Mtr.

( 35 Sq. mm 1/2 core) Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

Rupees Five Hundred Fourty

323 132.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables (F) 3 1/2 core 120 Sq. 540.35 Mtr.

Paise ThirtyFive Only

mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be Rupees One Thousand One

324 132.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables (I) 3 1/2 core 240 Sq. 1,168.57 Hundred SixtyEight Paise Mtr.

mm( 120 Sq. mm 1/2 core) FiftySeven Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid Rupees Two Hundred

325 2413.00 on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (B) 3 287.85 EightySeven Paise EightyFive Mtr.

core 4 Sq. mm Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to

Rupees Three Hundred

326 385.00 be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of 364.61 Mtr.

SixtyFour Paise SixtyOne Only

cables. (B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to

Rupees Five Hundred Ten Paise

327 110.00 be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of 510.05 Mtr.

cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

Rupees One Hundred

328 231.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A) 4 core 16 Sq. mm 153.52 Mtr.

FiftyThree Paise FiftyTwo Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

Rupees One Hundred Ninety

329 66.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables (B) 4 core 25 Sq. mm 190.89 Mtr.

Paise EightyNine Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Rupees ThirtyThree Paise

330 12.00 complete with out going tails, insulating tape etc for following size of cables. 33.33 Ea.

ThirtyThree Only

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Rupees ThirtyEight Paise

331 10.00 complete with out going tails, insulating tape etc for following size of cables. 38.38 Ea.

ThirtyEight Only

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Rupees FourtySeven Paise

332 16.00 complete with out going tails, insulating tape etc for following size of cables. 47.47 Ea.

FourtySeven Only

(D) 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees SixtySix Paise SixtySix

333 10.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (A) 3 & 1/2 66.66 Ea.

/ 4 core 25 Sq. mm

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees SeventyFive Paise

334 10.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 75.75 Ea.

SeventyFive Only

core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees One Hundred Three

335 6.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (C) 3 & 1/2 103.02 Ea.

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees One Hundred Fourty

336 4.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (E) 3 & 1/2 140.39 Ea.

Paise ThirtyNine Only

core 120 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees Two Hundred

337 4.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (G) 3 & 1/2 238.36 Ea.

ThirtyEight Paise ThirtySix Only

core 185 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

338 24.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 6.06 Rupees Six Paise Six Only Ea.

manner. (A) 1.5/ 2.5/4/6 Sq.mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

Rupees Fifteen Paise Fifteen

339 52.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 15.15 Ea.

manner. (C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

Rupees Twenty Paise Twenty

340 20.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 20.20 Ea.

manner. (D) 35/50 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

Rupees TwentyFive Paise

341 12.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 25.25 Ea.

TwentyFive Only

manner. (E) 70 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

Rupees FourtyFive Paise

342 12.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 45.45 Ea.

FourtyFive Only

manner. (G) 120 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

343 8.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 80.80 Rupees Eighty Paise Eighty Only Ea.

manner. (I) 185 Sq.mm.

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be

single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as

per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and Rupees Six Hundred

washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in TwentyTwo Paise Sixteen Only

(5) 300 X 50 X 1.6 mm Thick

Danger Sign boards : Providing and erecting metallic vitrified danger notice board as per language suggested by Rupees SixtyNine Paise

engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551. SixtyNine Only

Providing & erecting Medium Voltage Danger Notice Board sticker as per language suggested by engineer incharge Rupees TwentySix Paise

of standard size as per IS-2551 TwentySix Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

HUME & DWC PIPE : Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road

Rupees Four Hundred FiftySix

347 50.00 crossing or on floor with necessary material in an approved manner and making the ground as per original. (A) 450 456.52 Mtr.

Paise FiftyTwo Only

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS

II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable.

Rupees One Hundred

348 100.00 below ground / road surface for enclosing cable 137.36 Mtr.

ThirtySeven Paise ThirtySix Only

(D)120 mm outer dia.

Making trench in all soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and Rupees FiftyFive Paise FiftyFive

back filling the same and making the surface as normal ground. Only

Miscellaneous : Providing and fixing printed instruction chart both in English and Gujarati and duly framed with

Rupees One Hundred Thirty

350 2.00 front glasses, for treatment of person suffering from Electric shock with minimum 50" diagonally size. 130.29 Ea.

Paise TwentyNine Only

Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply.

Rupees Two Hundred Fourteen

Paise Twelve Only

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (b) 4mm Rupees One Thousand

352 20.00 1,027.17 TwentySeven Paise Seventeen Sq.Mtr

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge

Rupees Two Hundred

bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic

353 2.00 299.97 NinetyNine Paise NinetySeven Ea.

solution (Savlon or similar) etc. (All above contents shall be of standard makes)

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at

Rupees Two Hundred Fourteen

354 4.00 bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand 214.12 Ea.

Paise Twelve Only

provided or hung on wall hook.

Wall hook 22 to 25 cms. projection for keeping fire buckets made out of 15 mm dia. M.S rod grouted in wall to a

355 4.00 60.60 Rupees Sixty Paise Sixty Only Ea.

depth of minimum 15 cms.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

DESCRIPTION OF LIFT : Note:- (a) General Features & Special Features of the all lift items shall be taken as below.

(b) for Handicap Lifts, Minimum 10 Passengers Lift Capacity shall be considered.same is to be informed to architect

/civil authority to keep necessary size of lift well.

(c) The lifts of 15/ 16 and above passenger capacity shall be taken for Hospital Lifts; Where in Description “

Stretcher Lifts” shall be mentioned. (d) The Rates of the following items are for the lift of Machine room less. For

Machine room Lifts, rate for Rs. 1,50,000/- shall be deducted in Total Cost for the Lifts from 4 to 13 Passenger Lift.

Rs. 2,00,000/- shall be deducted in Total Cost for the Lifts 15 and above passenger capacity as extra cost. (e) Add

Rs. 80,000/- for the DUPLEX control for the lifts up to 10 floors and add Rs. 10,000/- for additional each floor above

(A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF,

vector control drive with encoder feedback closed loop system shall be used for lift car and door operation which

shall be full collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down

Contactor with overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with

safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S.

finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of s/s 304 chaker plate design

sugeested of engineer in charge. of engineer in charge. Car doors shall be of stainless steel grade 304, hairline

finish with centre opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency

stop device, mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor

switches must be with brail language as per lift act.[4] All landing doors must be fire rated for 2 hour shall be fully

automatic centre opening/ telescopic opening made of hairline finish steel grade of 304 with key holes and

infrared curtains with Unlocking facility from outside[5] Appropriate battery operated emergency light in the car

along with alarm switch shall be provided. Also, Emergency Light & Fan should start immediately without any Time

Delay as soon as power fails. [6] Digital scrolling indicator system for up-down arrow along with floor position

indicator shall be provided inside the car and at all floors. [7] Full height infra red curtain with multiple cross /

crossing light beams shall be provided. [8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation ( Manual Cranking Facility). [9] Audio visual indication in the lift

car showing over loading shall be provided such that doors kept open till excess load is removed. [10] Spring

buffers/PU Buffers shall be provided. [11] Car fan as per passenger capacity with automatic sleep timer shall be

provided. [12] Voice annunciator with suitable music shall be provided in lift car. [13] Self diagnostics system for

operational and safety parameters shall be provided in control panel. [14] Mechanical over speed governor with

governor calibration as per actual site parameters and submission of calibration certificate submission, door key

holes in the floor doors, fireman switch shall be provided.

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided

by the lift agency, along with the other steel structure works, foundations for the machine etc… [16] In the hoist

way fascia plate shall be provided without any extra cost, where ever required as / if directed by engineer in

charge. [17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage

protection and THD eliminator in circuit for lift machine room and lift well with proper numbers of light points,

with fixtures, exhaust fan and plug points shall be provided by the agency. Only 3 phase Power Supply shall be

made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be arranged by

Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to

erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.) [19] Agency has to provide all working drawings and documents and

liaison services for obtaining all necessary permission from lift inspector and other authorities. [20] acrylic

transparent licence/display A4 size holder in lift car [20A] As per statutory requirement of Govt. Of Gujarat lift &

escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk communication system.

Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift erection and

provide report by third party authorized by concern licensing authority 5.agency has to provide third party

insurance upto completion of free maintenance period and submit the document for the same.[21] Car Panel

Operating Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view from

inside cabin.[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of

should be provided at appropriate height on the Rear & Side Wall Panels in Lift Car. [23] With Necessary KVA

rating voltage controlled Stabilizer suitable for your controller, drive and all equipments of lift. [24] Necessary

rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by CEICED Department

(electrical Inspector)

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial Communication mode

including Regenerative power efficient operation,on site programming facility, Anti nuisance, Pte-opening,

BMS/RMS with necessary online real time monitoring system having necessary connectivity for remote monitoring

& other suitable supporting hardware & software devices to fulfil the purpose.2. Floor Indication LCD Display with

call registration & brail mark with arrival gong and hall lantern & TFT Screen in the car with MP3 Voice

Announcer.3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car and all Rupees Eighteen Lakh Fifteen

356 2.00 Doors, All landing doors must have fire rating up to 2 hours and car door must have multi-level crisscross beam 18,15,111.40 Thousand One Hundred Eleven Ea.

door protection. 4. To & fro communication system & wiring (i.e. car , control room & guard room ) and Each Paise Fourty Only

elevator are equipped with remote monitoring system.agency has to provide mobile app and user id and password

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:

Passengers, Ground plus 3 upper floors with Rated Speed of 1.0 m/sec.,

((C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Cat.III.

Providing & erecting approved make overload non-start feature & overload warning Indicator system in the lift

with making use of sound isolated floating platform & micro switches on SI frame to get sensation of live load

inside lift cage at any given moment, with provides new fixtures of overload warning inside lift cage with new relay Rupees ThirtyTwo Thousand

357 2.00 in the existing control panel to activate ‘Overload Non-Start Function with carrying out additional wiring including 32,527.05 Five Hundred TwentySeven Ea.

laying of new travelling cable, include minor civil work & without changing the existing capacity speed stops, travel Paise Five Only

& operation of the desired lift

Meters & Panel Accessories : Supplying and erecting approved make panel mounting type Digital Voltmeter Rupees One Thousand Two

358 28.00 having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel board with all connection, wiring etc 1,275.63 Hundred SeventyFive Paise Ea.

.with manufacturers calibration certificate. SixtyThree Only

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display, external

Rupees One Thousand Five

CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel board

359 28.00 1,558.43 Hundred FiftyEight Paise Ea.

with all connection, wiring etc .with manufacturers calibration certificate.

FourtyThree Only

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on existing panel board

Rupees Three Hundred

360 56.00 with necessary connections. 317.14 Ea.

Seventeen Paise Fourteen Only

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in Rupees Two Hundred

361 28.00 existing CRCA box duly secured with insulating materials connected to the meter 274.72 SeventyFour Paise SeventyTwo Ea.

Supplying and erecting approved make set of indicator lamps of LED type lamp, lens cover, Bakelite holder Rupees FourtyThree Paise

complete erected with necessary connections. FourtyThree Only

SCHEDULE-B SAG-PIU-Hostel at Porbandar

NAME OF WORK : CONSTRUCTION OF G+3 HOSTEL BUILDING AT PORBANDAR DISTRICT SPORTS COMPLEX. (2ND ATTEMPT)

Estimated Rates

but may Item of Work Unit

be more In Words

UPS : Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-

boost charger with IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having