REPAIRS AND REPLACEMENT OF SANITARY FITTINGS OF TOILETS AND OTHER ALLIED WORKS AT OFIL MAIN BLDG AT ISHAPORE UNDER GE (I) (P) FY ISHAPORE

Amount

Schedule 'A' Part-I (B/R items)

Dismantling floor,hearth or wall tiling including cement mortar bedding ( but not backing) and removing rubbish off premises complete all as specified

Demolition of concrete in ground floor & paving not exc 15 cm thick( above or below GL and removing rubbish off premises complete all as directed) complete all as specified

Demolition of brick work built in cement mortar including all quions arches , pillar etc but excluding ashalar facing dressed stoen and pre-cast concrete articles and removing rubbish off premises complete all as specified

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, inclu taking down roots of trees etc and removing rubbish off premises complete all as specified

Taking down door / window frame with shutter (without taking of shutter from the frame ) area not exc 1.5 sqm and removal off the site complete all as specified

Taking down door / window frame with shutter (without taking of shutter from the frame ) area exc 1.5 but n exc 4sqm and removal off the site complete all as specified

Taking up and down dia 15 mm bore steel water tubing and connections including cleaning for re-fixing or removing off the site all as specified.

Taking up and down dia 20mm bore steel water tubing and connections including cleaning for re-fixing or removing off the site all as specified.

Taking down old unserviceable PVC/CI pipe, any size from wall / floor or from trench and removal off the site complete all as specified

------Blank-----

------Blank-----

M & L for Non-skid Ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc over and including 20mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match with the shade / colour / matrix of the tiles complete all as specified

M & L for Non-skid Ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over and including 20mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match with the shade / colour / matrix of the tiles complete all as specified

M & L for 15 mm thick plaster on wall surface for fixing of vertical tiles finished even and fair in cement mortar (1:4) complete all as specified

M & L for Glazed ceramic coloured tiles in vertical surfaces of size 300 x 200 x7mm set and jointed neat cement slurry and pointed in colour cement to match with the shade / colour / matrix of the tiles complete all as specified

M&L for PCC (1:3:6) Type C2 (using 20 mm graded stone aggregate), 75 mm thick finished even & smooth without using extra cement as in plinth protection including bitumen/mast filling in the joint complete all as specified

M&L Brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement morter 1:6 complete all as specified

Material and labour rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces mixed with liquid water proofing compound all as per manufacturer's instruction and as specified. Make: 'Shaliplast LW+ of STP/Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: WPC shall be measured and paid for separately as 'Supply only'.

Material and labour for two coats of cement based paint over a coat of alkali resistant primer on external faces of walls including preparation of surfaces all as specified

M&L for Rendering 10 mm thick on brick or concrete surfaces in CM 1:6, finished even & smooth without using extra cement complete all as specified

M&L for Preparation of new plastered surfaces and applying with three coat of white wash over wall surfaces complete all as specified

M&L for rendering 5 mm thick in CM 1:3 on ceiling finish even and smooth without using extra cement complete all as specified

M&L for white wash three coats in ceiling incl prepration of newly plastered surfaces complete all as specified

M&L for preparation of old surfaces of wall and applying two coats of white wash complete all as specified

M&L for preparation of old plastered surfaces of wall & applying one coat of cement base paint after preparation of old decorated surfaces complete all as specified

Supply only liquid water proofing compound complete all as specified

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per manufacturer's specification and as specified.

Supply & fix for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per manufacturer's specification and as specified.

S & F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and incl handle both side one coat of primer etc all complete all as specified

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified

M&L for framed work such as grills, gratings, etc .. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified

S & F for figured glass pin headed type and glazing with oil putty in squares n exc 0.5sqm in each pane3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane etc.complete all as specified

M&L for PCC 1:3:6 type C-0(Using 12.50mm graded stone aggregate ) as for hold fast complete all as specified

M&L for preparation of new steel surfaces over 10 cm width or girth and applying with two coats of synthetic enamel paint over red oxide as complete all as specified

S & F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified

S & F 150 mm long aluminium anodised handle cast type and fixed complete all as specified

S & F Butt hinges, medium weight , cold rolled , mild steel , 100 mm long with welding to frame supplied and fixed complete all as specified

Supply and fixed in repair aluminium (extruded section body) door closer hydraulically regulated(variant C680, for 05 lakh life cycle tested, suitable for door shutter upto 1100 mm in width and of weight upto 80 kg and fixed complete all as specified. Make: Godrej Cat No 8156 or equivalent as in the list of make.

Supply and fixing in repair for stainless steel curtain rod 20mm dia and 1.00mm thick including fixing brackets complete all as specified.

M&L for PCC 1:2:4 type B1 (20mm graded aggregate) as in benching for manhole, base of floor etc complete.

Refixing of reusable GI pipes of 15mm bore after necessary cleaning and renewal of GI fittings as required all as specified. Note: (i) GI tubing retrieved against item No 1.07 shall be reused. (ii) New GI fittings required shall be supplied by the contractor and the quoted rate shall be deemed to be inclusive of the cost of the same.

M & L for 15 mm bore GI tubing ,"medium grade" with all fittings and fixed to walls and ceiling or laid in floor complete all as specified.

M & L for 20mm bore GI tubing ,"medium grade" with all fittings and fixed to walls and ceiling or laid in floor complete all as specified.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified

M & L in repair bib tap 15mm dia fancy type brass chromium plated complete all as specified Make Essco Cat No DLX 512KN or equivalent as in the list of makes.

M & L in repair stop valve 15mm dia brass chromium plated complete all as specified Make Essco Cat No DLX 513AKN or equivalent as in the list of makes.

S & F in repairs Grating square 150mm dia of PTMT complete all as specified Make: Prayag Cat No 115 or equivalent as in the list of Makes.

S &F 40 mm bore GI pipe medium grade cut in proper length for spout to WC/ bath including cutting/making holes through wall complete all as directed.

Supply and fix PVC (SWR) pipes 75mm dia type 'A', single socketed, conforming to IS-13592:1992 in any length with rubber ring joints laid in trenches or in floors complete all as specified.

Supply and fix PVC (SWR) pipes 110mm dia type 'A', single socketed, conforming to IS-13592:1992 in any length with rubber ring joints laid in trenches or in floors complete all as specified.

Supply and fix PVC (SWR) pipes 110mm dia type 'A', single socketed, conforming to IS-13592:1992 in any length with rubber ring joints fixed on walls complete all as specified.

S & F in repars PVC (SWR) 110mm bends any radius complete all as specified

S & F in repars PVC (SWR)75mm bends any radius complete all as specified

Supply and fixing in repair 100 mm dia cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches complete all as specified.

Supply and fixing in repair 100 mm dia cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall or laid in floor complete all as specified.

S & F repairs CI bend 100 mm bore(any radius) diminishing pices or tappers(larger bore to be measured) complete all as specified.

S & F in repairs CI bend 75 mm bore(any radius) diminishing pices or tappers(larger bore to be measured) complete all as specified.

S & F inrepairs CI branch piece single 100 mm dia (equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches complete all as specified.

S & F in repairs Vitreous China Urinal, Half stall type 305 x 305 x 440mm white complete all as specified. Make: Parryware Cat No C0578 & C1801 or equivalent as in the list of Makes.

S & F in repairs Vitreous china urinal partition white of size 130 x 330 x 675mm complete all as specified Make: Parryware Cat No C0507 (large,white) or equivalent as in the list of Makes.

S & F in repair pillar tap (hot and cold) 15mm dia brass chromium plated complete all as specified Make Essco Cat No DLX 516KN or equivalent as in the list of makes.

Supply and fix in repair vitreous China wash basin white, flat back, size 565 x 425mm x 175mm with pedestal complete all as specified. Make:-Parryware Cat No C8886 and C8887(Azure,white) or equivalent as in the list of makes.

S & F in repairs for Cromium plated Towel rail 20mm dia and 600mm long with brackets with screws Make: Essco Cat No AEC1111or equivalent as in the list of Makes.

S & F in repair low density PVC pipe 40 mm dia as in waste pipe to sink and wash basin

S & F in repairs for vitreous china squatting pan orrisa pattern 580mmx440mmx 300mm with integrated foot rest, S or P trpa including cement concrete bedding complete Make: Parryware Cat No C0117 and C2104 (white) or equivalent as in the list of Makes.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe but incl 100mm bore P Or S Traps Make: Parryware Cat No C0297(S Trap)/C0278 (P Trap) Elite or equivalent as in the list of Makes.

S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device Make: Parryware Cat No E8071 Standard Regular Seat Cover or equivalent as in the list of Makes.

S & F in repairs 10 litres, PVC valveless. Syphonic action type incl brackets and flush 32mm PVC flush pipe complete all as specified. Make: Parryware Cat No E8057* Economy or equivalent as in the list of Makes.

M & L for PCC (1:2:4) Type B0 (using 12.50 mm graded stone aggregate) 25mm thick as in sunken floor using liquid water proofing compound all as per manufacturer's instruction and as specified. Make: 'Shaliplast LW+ of STP/Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: WPC shall be measured and paid for separately as 'Supply only'.

S & F in repair Nahani trap 75 mm dia with grating jointing to waste pipe in CM and fixed in cement concrete 1:2:4 type B1

S & F in repair PVC (SWR) gully trap 125/110mm, setting jointing with solvent cement.

S & F in repair cast iron floor trap 75mm dia, with grating including jointing to wate pipe fixed in cement concrete type B1 (1:2:4).

S & F in repair PVC connection 15 mm dia, 450 mm long including brass fly nuts at both ends etc.complete

Material and labour as in repair for hoisting and fixing rotational moulded polyethylene(double layer) LLDPE water storage tanks 500 lit capacity (Cylinderical vertical), ISI marked(IS-12701:1996) hoisted and fixed in position including inlet, oulet and over flow connection etc complete all as specified.

Material and labour for hoisting and fixing rotational moulded polyethylene(double layer) LLDPE water storage tanks 1000lit capacity (Cylinderical vertical), ISI marked(IS-12701:1996) hoisted and fixed in position including inlet, oulet and over flow connection etc complete all as specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position and Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes,etc.(Exc 500 ltr n exc 1000 ltr)

S & F in repairs PTMT Ball brass valves 20mm, high pressure with epoxy coated alumnium rod and HD ball complete, screwed for iron pipe or brass ferrule and fixed. Make Prayag Cat No 152 or equivalent as in the list of Makes.

S & F in repairs for Towel rail brass chromium plated 600mm long complete all as specified and directed. Make: Essco cat part No ACE-1111 or equivalent as in list of Makes.

S & F inrepairs for Soap Dispenser With Glass Bottle complete all as specified Make: Jaquar cat part No ACN-1135N or equivalent as in list of Makes.

S & F in repairs for Toilet Roll Holder complete all as specified Make: Jaquar cat part No ACN-1151N or equivalent as in list of Makes.

S & F in repairs for two Way Bib Cock with Wall Flange complete all as specified and directed by Engineer-in-Charge. Make: Essco cat part No DLX- 512ANKN or equivalent as in list of Makes.

S & F in repairs for Hand Shower (Health Faucet) with 8mm Dia, 1.20 m long Flexible Tube & Wall Hook complete all as specified and directed by Engineer-in-Charge. Make: Essco cat part No ALE-ESS-583 or equivalent as in list of Makes.

Supply and fixing in repair vitreous China white cascade type wash down water closet pan (pedestal pattern) 640 x 345 x 690mm with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, PVC seat cover(coloured) and making all necessary connections complete as specified. Make: Parryware Cat No C8853.C8854(white, Prime) or equivalent.

S & F in repairs for WHB with Table Top Basin 475 x 340 x 145mm complete all as specified. Make: Parryware Cat No C8923 (Ovo, white) or equivalent as in list of Makes.

S & F in repairs for Single Lever Tall Boy with 600mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses complete all as specified and directed by Engineer-in-Charge. Make: Essco cat part No COS-103005B or equivalent as in list of Makes.

S & F in repairs for Angular Stop Cock with Wall Flange complete all as specified and directed by Engineer-in-Charge. Make: Jaquar cat part No VGP-81053 or equivalent as in list of Makes.

S & F in repairs for Waste Coupling 32mm Size Half Thread With 80mm Height complete all as specified Make: Jaquar cat part No ALD-709 or equivalent as in list of Makes.

S & F inrepairs for Bottle Trap With Fully Casted Body (With Internal Partition) 190X125 32mm with 190mm & 125mm Long Connecting Pipes & Wall Flange complete all as specified Make: Jaquar cat part No ALE-ESS-773AL or equivalent as in list of Makes.

S & F in repairs for Swivel Towel Holder Twin Type complete all as specified Make: Jaquar cat part No ACN-1115S or equivalent as in list of Makes.

S & F in repairs for Tumbler Holder or its equivalent complete all as specified Make: Jaquar cat part No ACN-1141N or equivalent as in list of Makes.

S & F in repairs for Swivel Mirror complete all as specified Make: Jaquar cat part No ACN-1195N or equivalent as in the list of Makes.

Schedule 'A' Part-II (E/M items)

Taking down carefully aluminium/copper point wiring (light,fan,socket,exhaust fan or power) complete (including sunken box) including fittings such as switches, ceiling roses, sockets, light fittingsboards/outlet boxes, fitting and fixtures etc. making good to disturbed surfaces of walls, floors, ceiling etc and removal off the site complete all as specified.

Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including PVC casing & caping medium grade of adequate size with all fittings and accessories including 1.6mm thick sunk MS pressed steel terminal boxes of appropriate size with 3.0mm thick plastic laminated sheet top cover with cadmium plated iron screws complete including PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi stranded copper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one light/ bell/ fan point controlled by one, one way switch complete all as specified.

---Ditto--- all as per item No 1.95 above but for one socket outlet point 5/6 Amps on independent board complete all as specified.

---Ditto--- all as per item No 1.95 above but for one socket outlet point 5/6 Amps on same board with other switches complete all as specified.

Supply and fixing switch piano flush type single pole one way 5/6 Amps complete all as specified.

Supply and fixing switch socket combination 2 in 1, 3/5 pin, 5/6 Amps, flush type universal complete all as specified.

Supply and fixing switch socket combination, 5/6 Amps/15/16 Amps and 5 in 1, flush type controlled by one switch complete all as specified.

Material and labour for ceiling rose PVC polycarbonate, isolated body 3 terminals complete all as specified.

Supply and fixing lamp holder, PVC/ polycarbonate type back plate suitable for 12 watt LED lamp complete all as specified. Note: LED lamp shall be measured and paid separately under relevant item.

Supply and fixing 12 watt LED retrofit lamp complete complete all as specified. Make: C&S Cat No - LTHPLEDLAMPP12W/B22 or equivalent make as in the list of Makes. (Note: 12 watt LED lamp shall be used in batten type lamp holder).

Supply and fixing 0.5 watt washroom indicator LED lamp complete all as specified.

Supply and fixing surface mounted type LED tube light fitting 1 x 20 watts, 230 volts with and including 1 x 20 watt LED lamp, energy efficient T8, powder coated CRCA sheet white regal batten type complete with all accessories internally pre wired and including connecting up with twin core twisted flexible cable of 0.75 sq mm 2 core copper conductor from ceiling rose to light fittings complete all as specified. Make: Crompton Greaves Lamp code No LTT8-20 with extruded aluminium body and Batten Code No DMLN1LT8-16 or equivalent make as in the list of Makes

Supply and fixing surface mounted type LED tube light fitting 1 x 8 watts, 230 volts with and including 1 x 8 watt LED lamp, energy efficient T8, powder coated CRCA sheet white regal batten type complete with all accessories internally pre wired and including connecting up with twin core twisted flexible cable of 0.75 sq mm 2 core copper conductor from ceiling rose to light fittings complete all as specified and as directed. Make - Crompton Greaves Lamp code No LTT8-8 with extruded aluminium body Batten Code No DMLN1LT8-8 or equivalent make as in the list of Makes

Supplied and fixed exhaust (Ventilating) fan of size 150 mm sweep AC 230/240 Volts 1750 rpm air delivery 275 Cu Mtr/Min complete all as specified. Make - Crompton Greaves Model - Axial air 6" Colour - Ivory/White or equivalent make as in the list of Makes

Supplied and fixed exhaust (Ventilating) fan of size 225 mm sweep AC 230/240 Volts bird screen for protection against birds and foreign matter, hub design, continous duty, double ball bearing, complete all as specified. Make - Crompton Greaves Model - Trans air 9" Colour - Grey or equivalent make as in the list of Makes

DK DAS AND CO

M/S Manna Construction

M/s Anil Kumar Dutta