Loading
Loading…
Loading…
Tender ID
Tender Value
₹2.0 L
EMD Value
₹2,000
Closing Date
4 Apr 2026, 6:00 pmClosed
Executive Engineering UPSIC KANPUR
Executive Engineering UPSIC KANPUR
Construction of separate womens toilet in Excise Godown At BAHRAICH
2026_MSME_1131787_6
2350/EE4/25-26
Open Tender
Civil Works
Percentage
90 days
BAHRAICH
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Executive Engineering UPSIC KANPUR
₹2,000
30 Mar 2026
30 Mar 2026
6 Apr 2026
30 Mar 2026
4 Apr 2026
30 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR-5.3) | |||||
| 2Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. DSR-5.22.1 | |||||
| 3Brick Work 1:4 Cement / Coarse Sand Mortar In Super Sturcture. (DSR-6.4.1) | |||||
| 412mm thick plaster in cement & fine sand of 1.25 fineness modulous mortar in 1:4 Including supply of all materail labour T&P required for proper completion of the work (DSR-13.1.1) | |||||
| 5Hard drawn steel wire fabric,Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion. (5.22.5) | |||||
| 6Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 300 mm long with necessary screws etc completenas. (DSR-9.62.1) | |||||
| 7Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 100mm long with necessary screws etc completenas.(DSR-9.63.1) | |||||
| 8Providing and fixing ISI marked oxidised M.S.door handles 75 mm long conforming to IS:4992 with necessary screws etc completenas.(DSR-9.66.1) | |||||
| 9Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR-9.20.1). | |||||
| 10Providing and fixing galss panes with putty and glazing clips in steeel doors,windows,clerestory windows all complete with 4 mm thick galss panes. (DSR-10.30.1) | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
TermsandConditionTenderCivilWorks.pdf
Tender Documents • 0.05 MB
BOQ_2112054.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .