Procurement of Measuring Equipments Civil and Electrical for the Sports Engineering Wing, Directorate of Sports and Youth Affairs Retender

Amount

Civil Measuring Equipments

ProfessionalLaser Measure (upto 150 m). • Distance measurement, area calculation, volume calculation – all intuitive to use • Illuminated, three-line display maximises readability • Memory function enables easy access to the last ten measurements • Robust, shockproof housing with IP54 protection class (splash and dust protection) • Reliable measuring results in all circumstances, proven by ISO certification Technical Data Laser diode 635 nm, < 1 mW, Measurement range 0.15mm – 40m, Laser class 2, Measurement accuracy, +/- 1.5 mm typical, Measurement time, < 0.5 s, typical, Measurement time, max. 4 s, Power supply 2 x 1.5 V LR03 (AAA), Automatic deactivation 5 min., Units of measurement m/cm, ft/inch, Memory capacity 10 (values), Dust and splash IP 54 protection. Make Bosch or equivalent

Professional Laser Measure (upto 50 m). • Distance measurement, area calculation, volume calculation – all intuitive to use • Illuminated, three-line display maximises readability • Memory function enables easy access to the last ten measurements • Robust, shockproof housing with IP54 protection class (splash and dust protection) • Reliable measuring results in all circumstances, proven by ISO certification Technical Data Laser diode 635 nm, < 1 mW, Measurement range 0.15mm – 40m, Laser class 2, Measurement accuracy, +/- 1.5 mm typical, Measurement time, < 0.5 s, typical, Measurement time, max. 4 s, Power supply 2 x 1.5 V LR03 (AAA), Automatic deactivation 5 min., Units of measurement m/cm, ft/inch, Memory capacity 10 (values), Dust and splash IP 54 protection. Make Bosch or equivalent

Measuring tape (up to 30m) Material -Linen/Microfibre, Weather resistant

Measuring tape (up to 10m) Material -Linen/Microfibre, Weather resistant

Measuring tape (up to 10m) Material -Steel, Weather resistant

Vernier Caliper Made of fully hardened stainless steel Accuracy: ±0.02 mm Graduations: 0.02 mm / 0.001 inch Measuring bar in both metric and imperial measurement Easy to read clear black engraved graduations For inside, outside, step and depth measurements Lock screw for sliding jaw

Round Steel wire Guage - Stainless Steel wire Gauge - Determine the thickness of non-ferrous wire and metals such as copper, brass, and aluminum

Automatic Level -Extended range: powerful 32x magnification power allows for a working range of 400-feet including Aluminum Tripod and Leveling Staff 6 meters with all accessories

Electrical Measuring Equipments

Digital RCD Tester Microprocessor controlled for high reliability and accuracy Accurate digital readout of disconnection time LED indicators to check correct wiring status Phase angle switch permits testing at 0 degree & 180 degree Measures voltage between line & earth before testing Frequency measurement indication Hand strap included for easy holding

Digital loop / PSC Tester Convenient to measure the loop impedance directly without bypassing the wires 15mP loop measurement which will not trip ELCBs Wiring check function Backlight function Battery is not used Over temperature protection Ovre voltage protection Built -in Voltmeter Provided with carrying case Safety standard EN 61010-1 CAT III 300V EN 61326 - 1

LUX METER Measuring the lux level of the LED lights, Light Meter with range 20, 200, 2000, 20000, 200000, Lux Accuracy +/ - 3%, Calibrated to standard incandescent Lamp

Bidder Name

S.V.BALAJI ENGINEERING CO