SR to Road Works

Name of Work :: SR to Pansora Alina Ladvel Road Km. 3/70 to 25/600 (Road

Safety work & Other Misc. work)

BILL OF QUANTITIES

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[1] Road marking with hot applied thermoplastic paints with 55.00 Sqm. 367.72

reflectorising glass beads on bitumin surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area,

thickness of 2.5mm is excluding of surface applied glass beds as

per IRC:35-2015. The finished surface to be level, uniform and

free from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color marking

should provide liminance coefficinet on cemend road shalll be

min 130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time. The

marking should meet the performance criteria for night time

reflectivity, wet reflectivity and skid resistance as mentioned in

the section-15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

[2] Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks 133.00 No 326.23

Raised Pavement Markers made of polycarbonate and ABS

moulded body and reflective panels with micro prismatic lens

capable of providing total internal reflection of the light

entering the lens face and shall support a load of 13635 kgs.

tested in accordance to ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width

and length shall not exceed 20 mm, 130 mm and 130 mm and

with minimum reflective area of 13 Sqcm on each side and the

slope to the base shall be 35 +/- 5 degree. The strength of

detachment of the integrated cylindrical shanks, (of diameter

not less than 19 +/- 2 mm and height not less than 30+/- 2 mm)

from the body is to be a minimum value of 500 Kgf. Fixing will

be by drilling holes on the road for the shanks to go inside,

without nails and using epoxy resin based adhesive as per

manufacturers recommendation and The color of the marker

should be as per the IRC 35-2015 and as directed by Engineerin-

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[3] Cautionary Warning Sign :-Providing and fixing sign boards 7.00 No 5077.27

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 90 x 90 x 90 cms. equilateral triangle as

per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro refiectivesheeting of Type4

as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr

long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of symbol for

each board shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered

shall be submitted by contractor. (C) Class-C Type-11 Retro

Reflective sheeting

[4] Regulatory / Mandatory Sign :-Providing and fixing sign boards 4.00 No 4618.73

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 60 cms. Dia Circle as per design of IRC67

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand post of Iron

Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white

bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (C) Class-C Type-11 Retro Reflective sheeting.

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[5] Direction (Junction) Sign :-Providing and fixing sign boards 2.00 No 21287.51

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 244x122 cms. rectangular as per design

of IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 50 x 50 x 5mm;

painted with bestquality epoxy coatings in black and white

bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be

in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective sheeting.

[6] Distance Informatory / Destination Sign :-Providing and fixing 2.00 No 18254.19

sign boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 180x120 cms. rectangular as

per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-11 as

per ASTM D- 4956 and latest M.O.S.T.Specifications; 4.0mtr

long (2 Nos.) stand post of 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from suitable size iron

angle of 50 x 50 x 5mm; painted with bestquality epoxy

coatings in black and white bends. The details of symbol

foreach board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x

x 60 Cms. for each leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for

years for the Retroreflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered

shall be submitted by contractor. (B) Class-B Type-4 Retro

Reflective sheeting.

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[7] Hazard Marker Sign :-Providing and fixing sign boards made out 8.00 No 3666.30

of 2.0 mm aluminium sheet / 4 mm ACP (Aluminum composite

Panel); size 90x30 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 1.8mtr long stand post of 75 x

x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white

bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be

in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted

[8] Providing and laying 25 mm thick (Compacted ) Semi -dence 230.00 MT. 3332.20

Bituminous concrete on exiting bituminous surface and using

specified graded black trapped machine crushed aggregate

with 5% Bitumen Vg-30 - 60/70 grade bitumen by Wt of total

mix as per MORTH specification including heating and mixing of

asphalt with B.T. chips in continuous batch mix plant and

transporting same at site and speading by sensor paver finisher

and consolidation the same with pair of 8 tonnes to 10 tonnes

vibratory roller to achive desire density and including flusing

the stone dust @0.03 cum/10smt including cost of required

tools , plants, all machineries, equipment fire wood , oil,

kerosene, charges etc. complete.

[9] Providing and erecting a"W" metal beam crash barrier 660.00 Rmt. 3354.21

comprising of 3 mm thick corrugated sheet metal beam rail,

cm above road/ground level, fixed on ISMC series channel

vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre,

m high, 1.1 m below ground/road level, all steel parts and

fitments to be galvanised by hot dip process, all fittings to

conform to IS:1367 and IS:1364, metal beam rail to be fixed on

the vertical post with a spacer of channel section 150 x 75 x

mm, 330 mm long complete as per clause 811)

[10] Providing Rubble pitching of 230 mm. average thickness 1270.00 Sqm. 628.22

including pointing mortar with C.M.1 : 3 (1 cement : 3 sand)

[11] Solar Blinkers (Providing and erecting Solar Blinker mounted on 4.00 No 27422.54

a steel circular hollow pole of standard specifications for for

diversion and other road safety use should fulfil road saftey

norms of constant output light and 40-50 flashes per minute

minimum, even used in, 3 m high fitted with solar Panel and

Light and fixed firmly in concrete foundation.)