RENEWAL OF FURNITURE AGAINST SURVEYED OFF AF STN PALAM UNDER GE (AF) MC CHANDIGARH

Amount

Schedule 'A' Part-I (Wooden Furniture)

SIDE BOARD,FD-372 Side Board large:- Overall size shall be 1500mm long, 450mm wide and 760mm high. All wood shall be first class hard wood teak .The bottom frame shall be of 18mm thick teak wood frame and shall be 125mm high from ground.All sides i.e-front shutters ,top,bottom sides and front sides of drawers shall be of 18mm thick plywood over which a laminaton sheet of 1mm thick PVC/Sunmica as approved by GE shall be fixed . Four drawers shall be provided in the right hand side of the side board . Left hand side shall have hung shutters. Back of side board shall be of 12mm thick commercial ply with lamination on one side irrespective of what is shown on drg . Bottom of drawers shall be of 6 mm thick plywood commercial. The shutters shall have continuous piano type hinges of appropriate size. Two Nos magnetic catchers shall be provided to the shutters in place of flush bolt . Two profile handle shall be provided to the shutter. Four profile handles as approved by GE shall be provided to the four drawers (one for each drawer). 4mmx19mm teak wood edging shall be provided to all edges of plywood and shelf. FINISH :All wood and particle board surfaces exposed to view when placed in position shall be French polished with high gloss finish. Rest all as per drg.

Sofa Set Five Seater : FD-281 The set consists of one long piece of three seat and two small pieces of one seat each. DIMENSION :Overall size of one Seat shall be 670mm long and 745 mm wide and 530mm high up to arm rest level. DESCRIPTION: All wood shall be of first class teak wood (MP).Legs of sofa set shall be 70mm x35mm in section teak wood . Front legs shall be jointed by 100mm x 35mm in section wooden rail in front . Front and rear legs shall be joined with 100mm x 35mm in section wooden rails in sides. 100mm thick seat cushion and back cushions shall be of size 530mm x 560mm (one numbers in seat and one numbers in the back). The cushion shall be of cool foam or any other superior quality foam of 40 density as approved by Engineer-in-charge. Cushion shall be covered with approved color tapestry cloth (approved by GE , not less than Rs:300/meter)or as directed byEngineer-in-charge. FINISH: All wood surface exposed to view when placed in position shall be French polished with lacquer finish rest.Rest all as per drg. Dimension of Long piece three seat :- DIMENSION : Overall size of the three seat shall be 1730mm long, 745mm wide and 530mm high. DESCRIPTION: seasoned teak wood throughout in frame work shall be used for manufacturing of sofa.All wood shall be of first class teak wood (MP) legs of sofa set shall be 70mm x35mm in section teak wood . Front legs shall be jointed by 100mm x 35mm in section wooden rail in front .Front and rear legs shall be joined with 100mm x 35mm in section wooden rails in sides.100mm thick cushion of 40 density covered with best quality tapestry cloth (approved by GE , not less than Rs:300/meter) shall be provided at seat and back as directed by Engr-In-Charge. Make of cushion-kurlon/sleepwell FINISH :All wooden surfaces internally and externally shall be melamine polished with high lacquer finish of walnut shade after properly smoothened the surface with sand emery paper.Rest all specifications are as per drg.

Table dining (3' x 3’) FD- 291 All as hown on drawing. Overall size shall be 900mm long 900 mm wide and 760mm high. All wood shall be of first class hard wood teak (MP). Legs shall be four in numbers. Legs shall be 55mm x 35mm in section and 740 mm high. Top of legs shall be joined together in short and long sides with 25mm x 75mm wooden rails. The top of table shall be of 18 mm thick plywood over which 1mm thick PVC/Sunmica lamination sheet shall be fixed as directed by Engineer-in-charge. 4mm thick teak wood edging shall be fixed alround the edges of top of tbale as directed by Engineer-in-charge. 5mm x 5mm in section groove shall be provided to the visible portion of legs at the top of legs. 25mm x 3mm flat iron 200 mm long made into right angle shall be provided on the inner sides of four corners of the table. Eight numbers 20mm x3mm flat iron 200mm long bent to shape as right angle shall be provided at all joints joining legs with top rails as directed by Engineer-in-charge. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish. Steel surfaces shall be powder coated in black colour as directed by Engineer-in-charge. Hard rubber/ PVC shoes of 25mm dia and 2.5mm high shall be screwed to the bottom of all legs.

Chair dining cushioned long back FD- 357 DIMENSION: Overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. DESCRIPTION: Timber shall be seasoned teak wood(MP) Ist Quality. Front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section65mm x50mm made to shape as shown on drg. The front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. The top of side rails shall be at 450 mm from bottom of legs. Two side stiffeners of 25 mm x 40 mm in section shall be provided joining front and rear legs. The bottom side stiffeners shall be 100 mm above the bottom of legs. A middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. For seat cushion, a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails, joined by 40 mm 20 mm in section wooden side rails. 70 mm x 10 mm batten shall be provided in the middle . 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick , 32 density foam shall be provided to the chair which shall be covered with leatherite of best quality as approved by GE. The back rest the shape of legs shall be as shown on drg. Rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. Back shall have vertical battens 20mmx25mm in section.50mm thick synthetic foam of 32 density covered with leatherite made to shape as shown on drg shall be fixed over 10mm thick plywood commercial. FINISH:.All wooden surfaces exposed to view when placed in position shall be French Polished with lacquer finish as directed by Engineer-in-c.

Chair dining cushioned long back FD- /MAP-II/04 Chair dining cushioned long back Overall size shall be 950mm high and 450mm wide the size of the legs shall be 40x50mm Front and isde rails ahall be of size 35x55mm stiffers of size .

Chair dining FD -279 All as shown on drawing. Overall size shall be 440mm long, 430mm wide and 890 mm high. All wood shall be of first class hard wood teak. Front legs shall be 30mm x 55mm in section throughout upto 460 mm high. Rear legs shall be 30mm x 55mm in section and 890mm high. The distance between the outer sides of legs in front shall be 440mm and distance between outer side of legs in the rear shall be 405mm. the legs shall be joined with front, sides, and rear rails made to shape out of 30mm x 65mm in section . Two side stiffener in short sides shall be provided of 20mm x25mm in section. One stiffener of 20mm x 25mm in section shall be provided in the middle of short stiffeners joining short stiffener. Back horizontal rests, two in Nos, of 45mm x 15mm made slightly curved in shape out of 45mm x 35 mm in section wood shall be provided, one at 18mm below the top of rear legs and other below 45 mm from the bottom of top horizontal rail. Canning shall be done without any joint in the cane. The cane shall be 2mm wide, o.4mm thick half round gola type of Shah or Premier Brand and woven in Godrej pattern. The cane shall weigh not less than 6 grams per ten RM. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish. Hard rubber/ PVC shoes of appropriate size shall be screwed to the Bottom of all legs.

Bed Side Table FD E6/MAP/15(R) DIMENSION: The overall size of the table bed side 450mm x 450mm x DESCRIPTION: (a)The frame shall be of 18mm square hollow pipe of 18 gauge. (b) It shall be made up of BWR plywood of grade - A of specified thickness as per drg in lieu of prelaminated particle board. (c) 1mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of drawers. (d) Each drawer shall be provided with 2 x Nos of stainless steel telescopic channels. (e) Drawer shall be provided with 100mm long 8mm dia chrome plated handles Rest all specifications and dimensions are as per drg FINISH: All metal surface shall be dry powder coated in black and all unlaminated surfaces shall be polished in satin/mat melamine finish of walnut shade after preparation of surfaces.

Bed hard FD-1102 The following dimensions and specifications shall be followed. Overall size shall be 2050mm long, 936mm wide and 800mm high. Long sides shall be of 18mm thick Plywood BWR laminated with PVC/Sunmica lamination sheet of thickness 1mm made to shape as shown on drawing. Short sides shall be of 18mm thick plywood BWR laminated with PVC/Sunmica lamination sheet of thickness 1mm joined with long sides. Wooden teak wood frame of 35mmx90mm shall be provided with long sides and short sides. Long sides shall be 1970mm long and short sides shall be 796mm long joined together to form the frame. Two equally spaced stiffeners shall be provided in the middle joining the long sides of the wooden frame. 18mm thick plywood shall be provided on long sides projecting 40mm over the top of hard bed and shall be 440mm high overall. 4mm thick mild steel brackets 100mm long made to shape as directed by Engineer-in-charge shall be provided at the junction of wooden and plywood in long and short sides. Foot board shall be 250mm high and Head board shall be 444mm high to be made of 25mm thick plywood laminated with PVC/Sunmica lamination sheet of thickness 1mm. Head board and foot board shall be provided with 40mmx40mm teak wood beading made to shape as shown on drawing. 12mm thick commercial plywood shall be provided over the wooden frame as hard bed top. All exposed edges of plywood including bottom edges shall also be covered with TW beading after properly sealing with Fevicol SH. All teak wood surfaces exposed to view shall be French polished with lacquer finish.

Schedule 'A' Part-II (Steel Furniture)

Chair Varandah (FD-359) 20mm dia MS conduit pipe shallbe used to make the frame of the chair, irrespective of drg the frame of the chari shall be poweder coated in white colour all as directed.

Chair tubular with cushioned seat and back all as per Drawing

Anil jindal and sons