Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.5 LAccepted-AOC | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹26.7 L+₹6.1 L (29.4%)Rejected-Finance PO CHAUBATIA RANIKHET DISTT ALMORA UTTARAKHAND 263645 | ALMORA | UTTARAKHAND | 263645 | L2 | Rejected-Finance Not being lowest tenderer |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
15 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Ranikhet
GE MES Ranikhet
PETTY REPAIR AND PERIODICAL SERVICES TO ALL MD OTM ACCN AT CHAUBATTIA UNDER GE RANIKHET
2022_MES_523066_1
GE/RKT/16 of 2022-23
Open Tender
Civil Works
Works
270 days
Chaubattia under GE Ranikhet
As per NIT
6 documents required · 6 mandatory
₹500
GE Ranikhet
₹60,000
Yes
26 Jul 2022
10 May 2022
17 Jun 2022
10 May 2022
15 Jun 2022
25 May 2022
60 days
Amount
BOQ ( Sch 'A') B/R items Attending day to day complaints related to joinery work such as repairs to cupboard, kitchen shelves, pelmet box, easing of doors and windows, kitchen knobs, fitting, iron mongry and fixing wire mesh, glass, repair of aluminium shutters etc as ordered/required on all working day to attend the complaint to be taken from complaint cell by rep of contractor at 0900am and report to complaint cell at every evening at 1700pm on daily basis after satisfactory completion, complete all as specified and directed. Material such as nails, screws, washers, putty/beading for glass, nut & bolts shall deemed to be included in the unit rates quoted by the contractor. Note:- The complaint against docket shall be taken from complaint cell at every morning at 0900am by rep of contractor on daily basis. (ii) Every docket will be submitted at complaint cell on daily basis of same day at 1700pm or early morning on next day after satisfactory completion. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractor. (iv) Rs. 125.00/day shall be recovered for non completion of every complaint within 48 hours (Including Sunday & holiday) from the date & time noting the complaint in MES complaint register. (v) Material will be measured (after fixing) and paid separately as supply only under respective items.
Supply only for 6mm thick plywood, graded BWR, type BB fixed to timber framework of any thickness complete all as specified and directed.
Supply only galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm including necessary beadings and fillets complete all as specified and directed.
Supply only 3 mm thick sheet glass, ordinary quality in square or reqd shape not exc 0.50 Sqm in each pane including oil putty complete all as specified and directed.
Supply only figured glass pin headed type in square n. exc 0.50 sqm in each pane, in square or reqd shape of 4mm thick each pane including oil putty complete all as specified and directed.
Supply only 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed.
Supply only 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed.
Supply only 150 mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed.
Supply only 250 mm long MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Attending day to day complaints related to water supply only & plumbing work such as leakage of bib cock/pillar cock/ stop cock angle valve of any description, changing the washers, cleaning of air lock in the pipe, leaking low level or high level flushing cistern by adjusting the float valve and including removal and replacement of rubber washer in PVC siphons and adjusting the float valve of over head tanks and leaking PVC bends/ galvanised iron pipes etc as per site requirement on all working day to attend the complaint to be taken from complaint cell by rep of contractor at 0900am and report to complaint cell at same day at 1700pm on daily basis after satisfactory completion, complete all as specified and directed, Materials such as threads, washers, lead etc shall deemed to be included in the quoted unit rates by the contractor . Note:- The complaint against docket shall be taken from MES complaint cell at every morning at 0900am by rep of contractor on daily basis. (ii) Every docket will be submitted at complaint cell on daily basis of same day at 1700pm or early morning on next day after satisfactory completion. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractor. (iv) Rs. 125.00/day shall be recovered for non completion of every complaint within 48 hours (Including Sunday & holiday) from the date & time noting the complaint in MES complaint register. (v) Material will be measured (after fixing) and paid separately as supply only under respective items.
Supply only 15 mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwd down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply only 'flushing cistern kit' for complete set to fitted inside as reqd for cistern functional complete all as specified and directed.
Supply only 15 mm bore bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwd down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply only 15 mm stop valves, cast copper alloy screwd down, high pressure with crutch or butterfly handle,, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply only 20 mm stop valves, cast copper alloy screwd down, high pressure with crutch or butterfly handle,, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply only 15 mm stop valves, fancy type chromium plated cast copper alloy screwd down, high pressure with crutch or butterfly handle,, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply only 15 mm pillar taps, cast copper alloy, with capstan heads, chromium plated, screwd down, high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwd for iron pipe and fixed complete all as specified and directed.
Supply only 15 mm Brass CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
Supply only 32mm waste fittingss, brass, chromium plated for wash hand basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.
Supply only 40mm waste fittingss, brass, chromium plated for wash hand basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.
Supply only grating doom 125mm dia of PTMT (minimum wt 40 grams) complete all as specified and directed.
Supply only 15mm PTMT bib tap standard of any colour scewed, for iron pipe and fixed complete all as specified and directed.
Supply only 15mm Ball valves, high pressure of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, minimum weight (15mm-142 grams). (Make : Prayag/Shakti) complete all as specified and directed.
Supply only 20mm Ball valves, high pressure of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, minimum weight (20mm-210 grams). (Make : Prayag/Shakti) complete all as specified and directed.
Supply only water tank cover for tanks of size 500 ltrs or 1000 ltrs complete all as specified and directed.
Supply only PVC seat cover for EWC of white colour complete all as specified and directed.
Supply only jet, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' length not less than 1.0 mtr long, fixed for flange with WC complete all as specified and directed.
Supply only 15mm bore steel water tubing, medium grade galvanizes for fixed to walls, floors, roof ceiling etc including thread, soluvent and etc complete all as specified and directed.
Supply only 20mm bore steel water tubing, medium grade galvanizes for fixed to walls, floors, roof ceiling etc including thread, soluvent and etc complete all as specified and directed.
Supply only PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
Supply only PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
Supply only GI nipple, and socket 15mm bore size complete all as specified and directed.
Supply only GI nipple, and socket 20mm bore size complete all as specified and directed.
Supply only GI elbow, and Tee 15mm bore size complete all as specified and directed.
Supply only GI elbow, and Tee 20mm bore size complete all as specified and directed.
Supply only GI socket reducer, and tank connection 20mm bore size complete all as specified and directed.
Supply only 32 to 40mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.
S&F 500 ltrs capacity rotational moulded polythelene water storage tanks tripple layered, coloured, (cylinderical vertical with closed top) hoisted and fixed in position including disconnecting and dismantling unserviceable PVC/Cement water storage tank of 500 Ltrs capacity complete all as specified and directed.
S&F 1000 ltrs capacity rotational moulded polythelene water storage tanks tripple layered, coloured, (cylinderical vertical with closed top) hoisted and fixed in position including disconnecting and dismantling unserviceable PVC/Cement water storage tank of 1000 Ltrs capacity complete all as specified and directed.
Attending day to day complaints pertaining to different type of repairs of steel windows, handles, door springs, frame, rolling shutter garrages, repair by welding etc (run or spot welding as per site requirement) on all working day to attend the complaint cell by rep of contractor at 0900am along with welding maching, gloves, welding glass, welding rod etc any other tools required and report to complaint cell at same day at 1700pm on daily basis after satisfactory completion as per time to time requirement complete all as specified. Note:- The above task shall be carried out by deploying minimum 01 No welder and 01 No of helper on daily basis. (ii) Necessary T&P, equiptment and safety gear shall be provided by the contractor. (iii) Contractor or his auth rep shall sign the attendance register and Demand register daily. (iv) Rs. 125.00/day shall be recovered for non completion of every complaint within 48 hours (Including Sunday & holiday) from the date & time noting the complaint in MES complaint register. (v) Material will be measured (after fixing) and paid separately as supply only under respective items.
Supply only butt hinges medium weight cold rolled MS, size 100mm long complete all as specified and directed.
Supply only butt hinges medium weight cold rolled MS, size 75mm long complete all as specified and directed.
Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including raking out joints, hacking for keys, scrubbing down with water etc and removing rubbish to a dostance not exc 50 m complete all as specified and directed.
Material & Labour for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth without using extra cement including mixing of water proofing compound of approved make @3% by weight of cement complete all as specified and directed.
M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material & Labour for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. .
Material & Labour for preparing newly plastered surfaces of wall and applying two coats cement base paint over a coat of primer complete all as specified and directed.
S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc, with and including setting the trap and pan in cement concrete bedding 1:2:4, Type B-1, using 20 mm graded stone aggregate minimum 150 mm thick all around and finished just below level of rim of pan to receive the floor finishes including making good floor complete all as specified and directed.
S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level white, with inlet ball valve, float and handle including brackets complete all as specified and directed.
S&F in repairs vitreous china wash basin white flat back size 550x400 mm excluding taps, waste pipe but including brackets complete all as specified and directed. .
S&F in repairs 15mm bore fancy type chromium plated central hole wash basin mixer without popup waste system with 450mm long braided hoses, screwed down high pressure with or without lettered 'Hot' and 'Cold' screwed for iron pipe complete all as specified and directed. Make :- Jaguar Cat No CON-167KNB or Equivalent make approved by GE
S&F in repairs 15mm bore fancy type chromium plated wall mixer with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs and wall flanges, screwed down high pressure with or without lettered 'Hot' and 'Cold' screwed for iron pipe complete all as specified and directed. Make :- Jaguar Cat No CON-237KNUPR or Equivalent make approved by GE.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of ceiling including cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of colour wash complete all as specified and directed.
M&L for complete removal of existing treatment & applying a layer of JK/Birla putty 2 mm thick average on wall surfaces in patches including cornices etc for proper levelling of plaster complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls/floor including cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of anti fungal coating emulsion paint of approved colour/tint of Make : Asian Paint-Apex ultima or equivalent make as speified in Appx 'A' to particular specification complete all as specified and directed.
Material & Labour for preparation of old or previously treated steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material & Labour for preparation of old or previously treated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. The contractor shall make necessary arrangment of scaffolding and ensure safety of labours complete all as specified and directed.
Material & Labour for preparation of old painted brick/concrete/ plastered surfaces of wall of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. The contractor shall make necessary arrangment of scaffolding and ensure safety of labours complete all as specified and directed.
Disconnecting existing tank exc 500m but n.exc 1000 ltrs capacity of any type of tank setting a side (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and hoisting if required, re-connectiong and refixing in position complete all as specified and directed.
M&L for cleaning, washing with water and removing all scale and diret etc from tanks of capacity exc 250 but n,.exc 500 ltrs capacity complete all as specified and directed.
M&L for French polishing two or more coats on wooden surfaces of any descriptin, width or girth including cleaning and preparing the surface including a coat of wood filler on old polished work till to obtain the mirror finish look of the surface complete all as specified and directed.
Material & Labour for preparation of old or previously treated steel and iron surfaces as in roof paint of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material & Labour for preparation of new painted brick/concrete/ plastered surfaces of wall of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. The contractor shall make necessary arrangment of scaffolding and ensure safety of labours complete all as specified and directed.
KUMAON VALLEY CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .