Regarding the work of carrying out necessary repairs at various places under SBM in the Bopal-Ghuma area of Thaltej ward in the North-West Zone. (A.R.C.)

Name of Work:- Regarding the work of carrying out necessary repairs at various places under SBM in

the Bopal-Ghuma area of Thaltej ward in the North-West Zone. (A.R.C.)

Sr.No Oty. Item Description Rate Unit Amt.Rs.

Excavation for foundation up to1.5 m depth including sorting out

and stacking of useful materials and disposing of theexcavated

1 stuff upto 50 Meter lead.(A) Loose or soft soil (R & B S.O.R 2023-

24 I.no. Item Code 04001A)

8 Upto 1.5 mt Depth 115.92 Cmt

8 1.5 to 3.0 mt.depth 128.52 Cmt

Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidation each deposited layer by ramming and

Providing and laying cement concrete1:5:10 (1-Cement:

5- coarses sand and:10-hand broken stone aggregates 40mm

3 3 nominal size) and curing complete excluding cost of 2492.51 Cmt

formworkin (A) Foundation and Plinth.

Providing and laying cement concrete1:4:8 (1-Cement: 4-

coarses and:8 hand broken stoneaggregates 40mm nominal size)

and curing complete excluding cost of formworkin (A) Foundation

Providing and laying cement concrete1:3:6 (1-Cement: 3-

coarses sand and:6-hand broken stone aggregates 40mm

5 2 nominal size) and curing complete excluding cost of 2976.00 Cmt

formworkin (A) Foundation and Plinth.

Providing and laying cement concrete 1:3:6 (1-Cement:3-

coarse sand:6-crushed stone aggregates 20mm nominal

size) and curing complete including cost of formwork in (A) wall

Providing and laying cement concrete work 1:2:4 ((1-

Cement:2- coarse sand:4-graded aggregates 20mm nominal

size) curing complete excluding cost of formwork and

Foundations, footings, base or columns and mass concrete

Slabs, landing, shelves, balconies, lintels, beams, girders

and cantilivers upto floor two level

c 1 Independent piers, columns, and pillars, upto floor two level 3661.30 Cmt

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregates 20 mm nominal size) for

reinforced concrete chhajjas not exceeding 10 cm. thickness

upto floors two level including finishing the exposed

surfaces with cement mortar 1:3 (1 cement : 3 find sand) to give a

smooth and even surface centering and form work and curing

complete excluding cost of reinforcement.

Providing and laying controlled cement concrete / Ready Mix

Concrete of M-200 and curing complete, excluding the cost

of form work and reinforcement for reinforced concrete work in:

Foundations, footings, base of columns, and mass concrete.

(B) 2 Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and

Cantilever upto floor

(D) 1 Columns, pillars, posts, and struts, up to floor two level. 4558.20 Cu.M.

(E) 1 Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

(K) 1 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4 (1-

Cement 2-coarsesand: 4-graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of form work but excluding the cost of

reinforsement for R.C.C work in (iv) Slabs having more than 13 cm

and upto 15 cm.thickness

Providing and Laying ordinary cement concrete 1:2:4 (1-

Cement 2-coarsesand: 4-graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of form work but excluding the cost of

reinforsement for R.C.C work in (iv) Slabs having more than 8 cm

and upto 10 cm.thickness

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg./Sq.Cm.in

foundation and plinth in Cement Mortar1:6 (1-Cement :6 -

5 (A) Conventional (upto 10 ton) 3981.21 Cmt

5 B) Modular 4241.70 Cmt

Extra Rate for brickwork in Above Item for super structure

13 above plinth level upto floor two level (B) Conventional

a 5 (A) Conventional 272.25 Cmt

b 5 B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) (A) Modular

c 10 42.66 Floor

D) above floor two level Item No. 2(6.13) (B) Conventional

d 10 40.09 Floor

Providing and laying in position Ready Mixed M250 grade concrete

for reinforced cement conctere work , using cement content as per

approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for a lead up to 10 kms

having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying, excluding the

13a 2 cost of centering shuttering finishing and reinforcement including cost 4853.56 Cmt

of admixtures in recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per latest IS 456 shall

be maintained) (Cement level 450 kg )

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in Cement

mortar 1:5 ( 1-Cement : 5 coarse sand ) in foundation and

Plinth conventional brickwork

Extra for half brick masonry in super structure above plinth

level upto floor two level (B) conventional

Providing form work in ordinary timber planking so as to give

a rough finish including centering, shuttering, strutting and

propping etc. height of propping and centering below

supporting floor to celling not exceeding 4 M & removal of the

same for in situ reinforced or plain concrete work upto floor four

Foundation, footings, bases of columns etc. and mass concrete.

(B) Flat surfaces such as soffits of supspened floors slabs Landings

b 5 and the like. (1) Floors etc. upto 200 mm in thickness. 252.00 Smt

(B) Flat surfaces such as soffits of suspended floor roof slabs

c 5 Landings and the like. (2) Floors etc. above 200mm in thickness. 270.90 Smt

Vertical surface such as walls (any thickness) partitions and the like

d 10 including attached buttresses & string course & the like. 229.95 Smt

(ii) Sides And Soffits Of Beam, Haunchings Cantilevers,

e 5 Girders, Bressumers And Lintels Not Exceeding 1 M In Depth. 192.15 Smt

(G) Columns PillarsPosts and struts. (1) Square Rectangular

Polygonal in plan.

g 5 (2) Circular or curved in plan. 422.10 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-levers

h 5 Girders Bressumers and Lintels exceeding 1M.in Depth. 259.88 Smt

Providing and fixing 35 mm thick panelled, glazed or panelled

and glazed shutters for Doors windows and clear story windows

including anodised alluminium But hinges with necessary screws

and indian teak wood shutters with.

a 1 (A) Plywood sheet panels. 3459.09 Smt

b 1 (B) Particle board panels 3464.51 Smt

c 1 (C)Hard board panels. 3433.65 Smt

d 1 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for cup boards

etc. including black enamelled M.S. butt hinges with necessary

screws.(A) Indian teak wood. (i) Fully Panelled.

Providing and fixing 25 mm thick shutters for cupboards etc. including

a 2 anodised alluminiu butt hinges with necessary screws. (A) Indian teak 3006.75 Smt

wood. (ii) Fully Glazed.

Providing and fixing 25 mm thick shutters for cupboards etc. including

anodised alluminiu butt hinges with necessary screws. (A) Indian teak

wood. (ii) Partly panelled and partl glazed.

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings

and frame alround, square or round bars with round headed bolts

and nuts or by screws (A) Plain Grill.

Providing and fixing glazed louvered glass windows

and ventilators with teak wood frame 10 cm. x 7 cm. size

including 3 coats of oil painting to wood work etc.complete.

Providing and fixing glazed louvered glass windows

and ventilators with teak wood frame 10 cm.x7 cm. size

including 3 coats of oil painting to wood work etc.complete.with

wooden louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for Doors, windows

and clere story windows including Indian teak wood frames

cm x 7 cm. size including anodized alluminium fixtures and

fastenings including primer coat of approved quality and two coats

of oil painting etc, complete.(ii) Fully Glazed.

Providing and fixing 35 mm thick shutters for Doors, windows

and clere story windows including Indian teak wood frames

cm x 7 cm. size including black enamelled iron oxidixed

fixtures and fastenings including primer coat of approved quality

and two coats of oil painting etc, complete.(ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 10 cm x 7 cm.

size including anodized alluminium fixtures and fastenings including

a 1 primer coat of approved quality and two coats of oil painting etc, 4940.25 Smt

complete. (iii) Partly panelled and partly glazed.

Providing and fixing 30 mm thick FACTORY MADE SOLID

PANEL PVC DOOR SHUTTER consisting of frame made out of

M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for

stiles and 15 mm x 15 mm for top and bottom rails.M.S. frames hall

have a coat of steel primers of approved make and

manufacture, M.S. frames hall be covered with 5 mm thick heat

moulded PVC ‘C’ channel of size 30 x 50 mm formings tiles,

and 5 mm thick 75 mm wide PVC sheets for to prail, lock rail and

bottom rail on either side, and 10 mm (5 mm x 2) thick, 20 mm wide

cross PVC sheet as gap insert for top rail and bottom rail, Panelling

of 5 stiles and rails with 30 mm wide x 5 mm thick PVC sheet

beading on eighter side, and joined together with solventcement

adhesive,. An additional 5 mm thick PVC strip of 20 mm width is to

be stculkon the interiors side of the ‘c’ channel using PVC

solvent cement adhesive etc. complete as per direction of

Engineer incharge, manufacture’s specification and drawing.

Providing and fixing in position collapsible steel shutters

with vertical channels 20 x 10 x 2 mm braced with flat iron

diagonal 20 x 5 mm size with top and bottom rails T iron 40 x 40 x

25 1 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking 5391.23 Sq.M.

arrangements, stoppers, handles, including a priming coat of

red lead paint & approved make.

Providing and fixing 1 mm thick M.S. sheet sliding shutters

with frame and diagonal braces of 40x40x6 mm angle iron,

3.15 mm M.S.gusset plates at Junctions and corners 25 mm

dia. pulley, 40x40x6 mm angle and T-iron guide rail at

top and bottom respactively with handles, stoppers and locking

agangement etc, including applying a priming coat of red lead

Providing & Fixing in position Alluminium doors with frame using

approved quality anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium) (a)

Frame sections 101.6x44.45 mm (b) Shutter bottom vertical & top

section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter

bottom section at 114.3x44.45 mm at (1.37kg/mt) Shutter

middle section at 100x44.3 wt.(1.37 kg/mt) incl.providing &

installing 5 mm thick approved color Acrylic sheet of

standard quality fixed with glazing chips on upper pannel &

Laminated sheet on lower pannel (wtt.0.13 kg/Rmt)

etc.comp.as direction of engg.in charge.(N.S.)

Providing and fixing extruded aluminum window having extruded

aluminum Colour r Powder Coated section frame main outer size

127mm x 38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four

track member size 122.20mm x 31.75mm x 1.10mm @ Wt.

Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm ,@

Wt. 1.398 Kg/mt with sliding shutters of horizontal member size

28 1 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical member of size 2119.14 Sq. M.

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

Providing & Fixing in position Alluminium vents with frame using

approved anodised extruded alluminium section as approved

by Engg. In charge.(Jindal alluminium) units equivalent

29 1 Approved Rate)Frame section of 63.50 x 38.50 mm. (wt. 1950.00 Sq. M.

0.68Kg/Rmt) incl. Providing & Installing 5 mmthick approved color

Acrylic sheet of standard quality etc. comp.

Providing and fixing standared extruded of alluminium section

of size 63 mmx38.10 mmx1.2 mm (Jindal Section:2434, or

equivalent @ Wt.0.643 Kg/mt) with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass

as details etc complete for Ventilation

Providing and fixing standared extruded of alluminium section of size

63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour Powder

31 2 Coated alluminium frame with 5 mm thick transparent bronze colour 2141.88 Sq.M.

tinted float glass as details etc complete for Fix Partition

Providing and laying 40 mm thick marble chips flooring rubbed

and polished (I.E.terrazo) to granolithic finish with under layer 30 mm

thick cement concrete1:2:4 (1-Cement: 2-coarse sand: 4-graded

stone aggregate 10 mm and down gauge) and to player

mm thick with white, black or white and blak marble cihps of required

sizes from 1 mm to 4 mm nominal size laid in cement marble powder

mix 3:1 (3- Cement:1-Marble powder by weight) in

proportion of 4:7 (4- Cement: 7-marble chips by volume)

(C) Medium Shade pigment with approx 50% white cement

and 50% ordinary cement (In top layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or dedo

rubbed, and polished to Granolithic finish to player 6 mm white,

black or white and black marble chips of size from smallest

to 4 mm nominal size laid in cement marble powder mix 3:1 (3-

Cement: 1 marble powder by weight) in proportion of 4:7 (4-

cement marble powder mix: 7-marble chips by volume) (B) Light

shade pigment with white cement (In top layer only)

Providing and laying white glazed tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush

Providing and laying Ceramic tiles 6 mm thick in flooring treads of

steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1-

cement :3-coarses and) finishing with flush pointing in white cement.

Providing & Fixing 20 mm thick Mirror Polished Decorative Granite

Board with Computerised Golden Letters Discription as

36 2 per instructions of engg. in charge to M.S. frame structure 4304.00 No.

for Inaugaration & Public Handover Function (N.S.)

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in

flooring treads of steps and landing laid on a bed of 12 mm

thick cement mortar 1:3 (1-cement:3-coarses and) finishing with

flush pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in skrting

risers of steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement: 3-coarse sand) and jointed with white cement

Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting risers of

steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement:3- coarse sand) and jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1- cement : 3-coarse sand ) finishing with flush

pointing in white cement.

Providing and laying 24" x 24" vitrified 8 to 10 mm

th.Double Charged Gloosy / Matt tiles of Approved make as

Approved by Adl.C.E. / Consultants for upto 10 cm high skirting

41 15 as approved by Engineer in charge over 10 mm thick cement 165.00 Rmt

mortar 1:6 (1 cement : 6 coarse sand)on new surface& jointed

with colour cement slurry incl with flush pointing & cleaning the

surface etc. comp.

Providing and laying polished Kota stone slab flooring over 20 mm

(Average) thick base of cement mortar 1:6 (1-cement:6-

coarses and) or L.M.1.1.5 (1-Lime putty:1.5-coarses and)

42 8 laid over and jointed with grey cement slurry mixed with pigment to 982.83 Sq.M.

match the shade of slab including rubbing and polishing etc.

complete. (A) 25 mm thick

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or

43 1 L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray 2194.63 Sq.M.

cement slurry including rubbing and polishing complete. (A) Marble

slab 25mm thick

Providing and laying polished Kota stone slab flooring over 20 mm

(Average) thick base of cement mortar 1:6 (1-cement:6-

44 5 coarses and) or L.M.1.1.5 laid over and jointed with grey 1085.48 Sq.M.

cement slurry including rubbing and polishing etc.complete. (B)

Providing and laying polished kota stone slab 25 mm thick in risers of

steps, skirting Dedo and pillars laid on 10 mm thick cement mortar 1:3

(1-Cement :3 coarses and) and jointed with gray cement

slury mixed with pigment to match the shade of slab including

rubbing and polishing etc.complete.

Providing and laying cement concrete flooring 1:2:4 (1-

cement: 2-coarses and:4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating coat of

neat cement. (A) 40mm thick.

Providing and laying cement concrete flooring 1:2:4 (1-

cement: 2-coarse sand:4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating coat of

neat cement. (B) 50mm thick.

Providing and laying broken china mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

48 10 mortar creme out upto surface using white cement including 739.89 Sqm

rounding off junctions and extending them up to15 cm along

the wall, clearing with water and oxalic acid etc.as directed.

Providing and laying coloured glazed tiles of the size

300 mmx200 mmx8 mm/300 mmx450 mmx8 mm in skirting,

49 1 risers of steps and dedo on 10 mm. thick cement plaster 1:3 1426.95 Sqm

(1cement: 3 coarse sand) & jointed with white cement slurry.

Providing ridges or hips 600 mm overall in plain G.I. sheet class-

3 fixed with G.I. J or L Hooks and nuts 8 mm dia G.I. Limpet

and bitumen washer complete. (1) 0.80 mm thick sheet.

Providing and fixing 150 mm wide 450 mm over all semi circular plain

G.I.sheet class-3 gutter with Iron brackets 40 mmx3 mm size Bolts,

51 1 Nuts, washers etc. including making necessary connection 555.71 Sqm

with rain water pipes. (i) 0.80 mm thick Sheet.

Providing and fixing five courses water profing treatment

with bitumen felt consisting of second and fourth course of

blown/ bitumen or/and residual bitumen applied hot at

kg.per Sq.M.of area for each course and first course with

fibre base bitunen saturated under lay type land third course with

fibre base self finished felt type 2 grade 1 and fifth and final

course of stone grit 6 mm and down size or pea sizes gravel

spread at 0.008 Cu.Metre/Sq.metre preparation

of surface excluding grading complete.

Providing and fixing on wall face C.I. Rain water pipe including

filling the joints with spun yarn soaked in neat cement slurry and

cement mortar 1:2(1- Cement : 2-fine sand) (A) 75 mm dia.

Providing 15 mm thick cement plaster in single coat on

Rough (Similar) side of single or half brick walls for interior

plastering up to floor two level and finished even and smooth in

(i) Cement mortar 1:3 (1-cement :3-sand)

Providing 20 mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12mm thick

55 10 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing 297.68 Sqm

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two coats) over

and including a primary coat of white washing to give an even

56 23 shade after through brooming the surface to remove all dirt, 12.29 Sqm

dust, mortar drops and other foreigh matter.

Removing dry or oil bound distemper by a washing

and scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete.

Distempering with dry distemper of approved brand and

manufacture (two coats) and of required shade on wall surfaces

of given an even shade, over and including a priming coat

of whiting after thoroughly brooming the surface free from

mortar dropping and other foreign matter.

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required shade on wall

surfaces to give an even shade, over and including a

priming coat with distemper primer of approved brand

and manufacture after thoroughly brushing the surface free

from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered smooth.

Extra Coat for Above Item over above for every subsequent

coat of approved brand and manufacture.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to

61 45 give an even shade including throughly brushing the surface free 78.44 Sqm

from mortar droppings and other foreign matter and sand papered

Extra over item for every sub sequent coat of wall painting with

plastic emulsion paint of approved brand

Extra over item for painting with plastic emulsion paint of approved

brand on ceilings and sloping roofs.

Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly

cleaning, oil, grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand paper

with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

64 25 an even shade including cleaning the surface an even shade 86.94 Sqm

including cleaning the surface of all dirt, dust and other foreign matter.

Painting one coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint, brushing to

give an even shade including cleaning the surface of all dirt, dust

and other foreign matter.

66 10 Extra over item for every sub sequent coat of paint. 50.40 Sqm

Painting two coats (excluding priming coat) on new steel and

other metal surface with synthetic enamel paint, brushing to give

an even shade including cleaning the surfaceofalldirt,dust and other

foreign matter.

Painting one coats (excluding priming coat) on previously

printed steel and other metal surface with synthetic enamel paint,

brushing to give an even shade including cleaning the surface

of all dirt, dust and other foreign matter.

Extra over Above item for every sub sequent coat of paint.

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and fittings

70 10 with ready mixed bituminous brushing, black, anti corrosive to 20.16 Sqm

give an even shade including cleaning of all dirt, dustand other

foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and fittings

71 10 with ready mixed bituminous brushing, black, anti corrosive to 25.05 Sqm

give an even shade including cleaning of all dirt, dust and other

foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on new wood

and wood based surface with enamel paint, interior to give an

even shade including cleaning the surface of all dirt, dust

and other foreign matter sand papering and stopping. (a) Ready

mixed paint brushing wood primier pink.

Painting one coats (excluding priming coat) on previously

painted wood and wood based surface with enamel paint, to

73 35 give an even shade including cleaning the of all dirt, dust and other 26.78 Sqm

foreign matter.(b) Ready mixed paintbrushing priming for enamel

74 5 Extra over Above item for every sub sequent coat of paint. 24.26 Sqm

Painting two coats (excluding priming coat) on new wood

and wood based surface with ready mixed paint, brushing, oil,

75 45 gloss, semi gloss to give and even shade including cleaning of all 104.12 Sqm

dust, dirt and other foreign matters and papering and stopping.

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even

76 30 shade after thoroughly brushing the surface to remove all dirt, 113.40 Sqm

and remains of loose powdered materials.etc complete

Applying two coats of Birla (white cement based) or

Asian (acryliclapy-putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to give an

even shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered smooth.

Painting one coats (excluding priming coat) on previously painted

wood and wood based surface with enamel paint, to give an even

78 40 shade including 55.13 Sq.M.

cleaning the of all dirt, dust and other foreign matter.

Writing letter or figures on any surface with black japan per

paint (stops, comas, hyphens and the like not to be measured letter

and paid for separately) (i) Block (Letters/Figures) (Per per

10 Letter pet CM.HT) Cm/Ht

Demolition including stacking of serviceable materilas and

80 5 disposal of unserviceable materials with all lead and lift. (i) R.C.C. 1047.38 Cu.M.

Demolition of Brick work and stone masonry including stacking

of serviceable materil as and disposalof unserviceable materials

with all lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking

82 20 of serviceable materil as and disposal of unserviceable materials 47.25 Sqm

with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materil as and

disposal of unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

Dismentling steel work including distempering and stacking

the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, hold fasts

85 22 and other attachment etc. complete and stacking the material 185.85 Each

within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,hold fasts

86 30 and other attachment etc. complete and stacking the material 248.85 Each

with in all lead and lift.(ii) Exceeding 3 Sq.M.in area.

Dismentling barbed wire in fencing including making rolls and

also including dismentling fencing posts including all earth work

concrete in base and making good the disturbed ground

87 15 stacking useful materials as directed and disposing as 66.15 Rmt

directed and disposing of the unserviceable materials with

all lead and lift.

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water

88 15 pipes with fittings and clamps including stacking the materials with 74.03 Rmt

all lead and lift (for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian

89 20 and Europe an type, flushing tank etc. including stacking the 401.63 Each

materials with all lead and lift

Scraping oil paint from steel and other metal surface and

making the surface even (with Hand Scraping.)

Removing and scraping of old deteriorated plaster of

any thickness from wall / R.C.C member including

stacking of serviceable material and disposal of unserviceable

from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape and size

92 5 as specified in existing R.C.C. slab including cutting chase and 168.53 Each

Cutting out cracks of roof terrace to V-section, cleaning out,

93 5 wetting, grouting with cement and sand slurry 1:3 (1-cement 3- 64.58 Rmt

Cutting out cracks roof terrace to V-Section cleaning out and

94 5 filling solidly with a hot mixture of bitumen and clean dry 75.29 Rmt

sand (1:1 by weight)

Providing & Fixing in position Alluminium doors with frame

using approved quality anodised extruded alluminium

section as approved by Engg.in charge(Jindal alluminium)(a)

Frame sections 101.6x44.45 mm (b) Shutter bottom

vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt)

(c) Shutter bottom section at 114.3x44.45 mm at (1.37 kg/mt)

Shutter middle section at 100x44.3 wt.(1.37 kg/mt) incl.providing

& installing 5 mm thick approved color Acrylic sheet of

standard quality fixed with glazing chips on upper pannel &

Laminated sheet on lower pannel (wtt.0.13 kg/Rmt) etc.comp.as

direction of engg.in charge.(N.S.)

Providing & Fixing in position Fully Panelled / Partly Panelled Partly

Glazed / Fully Glazed Alluminium doors with frame using

approved quality anodised extruded alluminium section as

approved by Engg. In charge.(Jindal alluminium )(a) Frame sections

101.6x44.45 mm b) Shutter vertical & top section 83.5x44.45

(wt. 1.31 kg/mt.)( at 1.31 kg/mt) © Shutter bottom section at

96 2 114.3 x44.45mm at ( 1.37 kg/mt ) Shutter middle section at 4583.00 Sq.M.

100x44.3 wt. (1.37 kg/mt ) incl. providing & installing 5 mm thick

Glass of standaed quality fixed / 12 mm thick Laminated

sheet with glazing chips (wt. 0.13 kg/ Rmt) in panels etc. comp.

as per Detail Given & direction of engg.in charge.

Providing & Fixing in position Alluminium window 2/3/4

track sliding / fix type with frame using approved anodised

extruded alluminium section as approved by Engg. In

charge.(Jindal alluminium) units equivalent. including P/F

installing 5 mm thick clear/tinted Glass of standard quality

Providing & Fixing in position Alluminium vents with frame using

approved anodised extruded alluminium section as approved

by Engg. In charge.(Jindal alluminium) units equivalent

Frame section of 63.50 x 38.50 mm. (wt.0.68 Kg/Rmt) incl.

Providing & Installing 5 mm thick Glass of standard quality

Providing and fixing of Ridge flashing for roof panel shall

be made out of 0.5 mm thick pre coated GI sheet. The Pre

coatedsheet shall be of minimum 240 mpa steel grade

confirming to IS 14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992, 5-7 microns epoxy

primer on both side of the sheet and polyester top coat 15-18

99 1 micron. The PP GI Sheet shall have plastic protective guard 510.10 Sqm

film of minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel members by

poprivetor self drilling/self stitching fastners @ maximum

450mm c/c along length of capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface having 1-2

100 1 mm thickness as per directed by engineer incharge 963.00 Smt

etc as completed (N.S.)

Providing and fixing 1.20 Metre high fencing with 2.0 Metre

long M.S. Angle posts 40 mm x 40 mm x 6 mm and oil painting

coats fixed at 2.5 Mt, C/c. with five Horizontan lines and two

diagonals of galvanised steel barbed wire weighting 9.38 Kg. per

100 Metre, strained and fixed to posts with G.I, staples including

fixing the posts in ground with 0.5 M x 0.5.M x 0.5 M. block in

C.C 1:5:10 etc complete.

Renovation and Repairing work in Chainlink fencing any size

and also refixing work incl. febrication work with all materails

to be painted one coat of primer and twocoats of paint as

directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick

over B.B. masonry in C.M, (1:6) in front and dwarf wall 1.0 Mt. high

104 1 and 23 cm. thick cement plaster to masonry / in C.M.1:3) and 2235.66 Rmt

cement concrete flooring in 1:2:4: mix 5cm.dia.drain pipe

Constructing a cooking platform 60 cm. width and 70 cm high

resting on B.B. Masonry walls 23 cm. thick in C.M. (1:6) with (i)

Fixing or precast R.C.C. 1:2:4) 8 cm. thick slab with marble chips

set in C.M. (1:6) (6 mm thick terrazo) with plastering on

exposed faces walls in C.M. (1:4) etc complete.

Extra rate for using Ready Mix Concrete of any grade for

below ground level to vertical upto any floor with delivery & suction

106 1 Pipe & Pump etc. The rate includes fule, pump operator, skilled 760.00 Cmt

labor, driver etc completed and as per direction of engineer in charge

P/A Tremix with dewartering machine and floater machine

on constructed CC work for finishing the surface as per

107 3 requirement. The rate including all machinaries, labor, loading, 54.00 Sq.M.

unloading, transportaion etc complete as per direction given

by engineer incharge.

Carrying out timber treatment to all wood work including drilling holes

and spraying oil based chemical solution on surface of timber work for

termite control including labor and material etc. complete. Using

Chlorpyriphos20 EC as per 6313 2013 Part III (1% concentration by

mass) is recommended one litre chemical emulsion diluted with

liters of kerosene. Total diluted concentration will be 20 liters inclusive

of 1 liter chemical emulsion application in drilled holes and 0.75 / Litre

chemical per one Sqmt two coat on wood surface not protected by

paint or varnish.

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration

109 5 by mass) is recommended 10.5ml chemical diluted with 5 liters of 88.40 Smt

water application 0.5 litre chemical /Sqm of surface is recommended

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment

including labour and material consist ment with I.S.

specification. Using Chlordene and Chior purfiles 20 EC. As

Per 6131_paret-II Consentration Weight on percentis

recommended i.e one litre 20 EC chemical emulsion with

liter give 1% concrentration inclusive of one litre chemical

emulsion appication attherate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Carrying out wall treatment for termite control including spraying with

chemical solution in oil base including labour and material Using

Chlorpyriphos 20 ECAs per IS 6313 part - II (1% concentration by

mass) is recommended i.e one litre chemical emulsion diluted with

liter oil base. Total solution will be 20 liters inclusive of one liter

chemical emulsion application at the rate of 7.5 litre chemical / Sqm

of surface is recommended as per I.S.S

Providing erecting and fixing double coated Syntex or

equivalent PVC.(ISI) water tank of required capacity each with

112 5 3.91 Litre

all necessary fittings and connection etc. complete on terrace.

Providing and fixing to wall, ceiling and floor galvanised Mild

steel tubes (Medium grade) of the following nominal bore,

tube fitting and clamps including making good the wall ceiling and

Providing and laying in trenches galvanised mild steel

tubes (Midium grade) of the following nominal bore, and

tube fitting (Earth work in trenches to be measured and paid

for separately)

Making connection of galvanised Mild steel distribution branch

with galvanised mild steel main 50 mm to 80 mm nominal bore

by providing and fixing tee including cutting and threading the

pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working

pressure poluthene pipes of the following out side Dia.

116 Low densidy, complete with special falnge compression type

fittings,wall clips etc.including making good the wall ceiling and

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2

working pressure polythene pipes of the following out side

117 Dia. Low densidy, complete with special falnge compression

type fittings, wall clips etc. including making good the wall

ceiling and floor.

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with C.I.

118 2 screaed down or higned grating including cost of cutting and 600.08 Each

making good the walls and floor 100 mm inlet and 50 mm

outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan (Indian

type W.C.Pan) size 580 mm (Earth work, bed concrete, foot

119 2 rest and trap to be measured and paid for separately) (A) 926.10 Each

Vitreous China. (I)Long pattern = White colour

Provdg. & fixing wall mounted White / Color Vitreous

China European water closet with integral P trap of

120 3 "Cera" - Clair Series or equivalent incl. seat cover , Chair 4250.00 No.

Bracket etc. complete as per direction of engg. In charge.(N.S.)

Providing and fixing wsh down water closet (Europe an

type, W.C.Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar1:1 (1- Cement:1-fine sand)

(Seal and cover to be measured and paid forseparately) (A)

vitreous China Pattern :(i) in white colour

Provdg. & Fixing Flat Back Large Urinal of White/ colour of "Cera" or

" Hindware" incl. C.P. Brass waste coupline , waste pipe,

pvcconnection etc. Complete.( size 635 x395x420 mm )

Providing & Fixing Angle cock of " Ess Ess" - Trend series

123 5 or equivalent standard make as approved by engg. in charge 675.00 No.

all complete. (N.S.)

Providing and fixing 100 mm size P or S trap for water

closet squatting pan including jointing the trap with the pan and

soil pipe in cement Mortar1:1 (1-Cement : 1-Fine sand)(A)

Vitreous China.

Providing and fixing wash basin with single hole for pillar tap

with C.I.or M.S. brackets painted white including sutting holes and

125 4 making good the same but excluding fittings. (A) Vitreous 1400.18 Each

China: (ii) Flat Back wash basin 550 mm x v 400 mm size.(i) In white

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted

white including cutting holes in walls and making good the

same but excluding fittings. © Vitreous China Sink. (i) 600 mm x

450 mmx 150 mm size

Providing and fixing 600 mm x 450 mm bevelled edge mirrror

of superior glass mounted on 6 mm thick A.C. sheet or ply wood

sheet and fixing to wooden pluge with C.P. brass screws and

Providing and fixing chromium plated brass halftrun flush cock of

128 approved quality including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter wash

basin with signle hole for pillar tap of "Cera " - Concord series

of 550 x425 mm size to be fiited in stone counter with necessary

brackets painted white incl. cutting holes and making good the

129 2 same .Cost Includes P/F C.P. brass waste coupline, 32 mm dia 2950.00 No.

fisher union ,15 mm dia. Pillar cock & Angle cock of " Ess Ess"-

Trend series ,32 mm dia. Waste pipe etc. complete as per

dir. of engg. in charge.

Providing and fixing wash basin with single holefor pillar tap with C.I.

or M.S. brackets painted white including sutting holes and making

130 2 goodthe same but excluding fittings.(A) Vitreous China:(ii) Flat Back 1400.18 No

washbasin 550 mm x v400mm size. (i) In white colour.

Providing & Fixing S.S.304 Grade Sink of Nirali / Krishna

131 1 or Equivalent Make for Kitchen Platform of size : 24":x18" 4650.00 No.

as per Direction of engg. In charge

Providing and fixing C.P. brass towel rail comlete with

132 3 C.P.brass brackets fixed to wooden plugs with C.P. brass 597.22 Each

scews.(B) 600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf with C.P.

133 2 brass bracket and guard rail complete mixed to wooden plug 561.03 Each

with C.P.brass screws.

134 5 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following size. (A)

Brass screw down bib tap polished bright.

8 (i) 15mm dia. 184.98 Each

8 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. (B)

Brass chromium plated screws down Bib Tap.

5 (i) 15mm dia. 184.98 Each

5 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. ©

Gun metal screw down bib tap.

10 (i) 15mm dia. 157.29 Each

10 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head, screw down high

pressure with screws, shanks and back nuts.

5 (i) 15mm dia. 305.67 Each

5 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-return fullway

5 (i) 15mm dia. 184.98 Each

4 (ii) 20mm dia. 201.80 Each

5 (III) 25 MM DIA 416.47 Each

4 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun flush cock

140 of approved quality including fixing in pipe line etc. complete.

5 (i) 20mm dia. 252.26 Each

5 (ii) 25mm dia. 261.16 Each

5 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe , tap

etc.complete. (A) White earthen ware flat back or corner type

size 430mm x 260mm x 350mm.

Providing and fixing Urinal of approved quality

including connection with trap and with integral longitudinal

flush pipe. (A) Squating plate pattern white earthen ware

Providing and fixing chromium plated, bottle trap with

necessary couplings of approved quality for wash basin.

Providing and fixing ball cock ofapproved quality as directed.

(A) Copper Metal (i) 25mm dia.

Providing and fixing ball cock of approved quality as directed.

(B)Abonite (i) 25mm dia.

Filling with good Quality thor as and where directed by

the Architect / Engineer-in-charge, in sunk in layers of 15 cm.

146 1 thickness, including watering, ramming well etc. complete, as 3850.00 Cmt

directed by the Architect / Engineer-in-charge .

Providing laying and jointing in true line and level 15 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

147 22 wall with the help of clamp at every two metre C/C or shall be 71.93 Rmt

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with solvent, including

cost of all materials.adhesive

Providing laying and jointing in true line and level 25 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

148 10 wall with the help of clamp at every two metre C/C or shall be 90.93 Rmt

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 32 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

149 15 wall with the help of clamp at every two metre C/C or shall be 117.97 Rmt

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 40 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

150 5 wall with the help of clamp at every two metre C/C or shall be 146.65 Rmt

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 50 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

a 10 wall with the help of clamp at every two metre C/C or shall be 193.73 Rmt

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing in line level plumb, fabricating and fixing three

row horizontal barbed wire fencing and punched tape concertina

coil of 9 turns per meter of 610 mm dia fixed with clips on top of

the angle iron posts. The punched tape concertina coil having

sharp barbs at every 25 mm spacing shall be 0.5 mm thick and

mm width and weighting 13 kg/100 mt. (Average) as per

151 10 manufacture's specification. The rate shall also include 390.00 Rmt

providing and fixing 1.20 mt.total long MS angle 40 x 40 x 6 mm

@3.00 mt.c/c spacing embaded in RCC column, angle posts shall

be painted with one coats of red oxide and two coats of enamel

paint of approved quality at top compound wall.

Fixing sun film for protection sunlight in black or any colour as as

directd by engineer In Charge.(Market rate)

Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality

& Color / Pattern as per Consultant's design also includes

required fabrication structure in the grid of 2'-0x2'-0 size using

hollow pipe of16 gauge & size 2"x1" & 1"x1" ,G.I. & Bitumen

153 5 Washers, Silicon paste application for fixing the sheet . Rate 1930.00 SqM

also includesnecessary bending, cutting, labor charges , Zinc

Primer coat & Two coats of oil painting of color as approved by

consultants & making good the wall. (N.S.)

Providing 2 mm thick F.R.P. Gutter with necessary M.S.

Supporting Brackets. (N.S.)

Hiring charges for J.C.B.machine inclduing cost of fuel,

155 5 operator, dirver etc.. ( 12 hours sift day/night) (N.S.) 600.00 Hrs.

To provide tractor with hydraulic trolley, driver, 4 Nos. of Labor with

all tools like bucket drum, showels, trikam, pavadas,

etc,, to carryout different works during monsoon for 12 Hrs. Shift.

Work shall be carried out as per the instrucitons of Engineer In-

Charge.No extra charged shall be paid for night shift.

Roller Blind Providing and fixing Roller Blind curtain fixed

on window level on wooden batten and curtain lift with

cotton thin rope, make of aerolax or equivalent design

and colour as per instruction by engineer – in – Charge with

necessary hardware fitting, material and labour etc complete.

Providing & Fixing Door closer - Door closers (Heavy type of

number) Hardwire or Everite Prabhat or Equivalent

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S. bar

bent to shape with hooked ends of R.C.C. slabs during laying incl.

painting the exposed protion of loops, all as per standard design

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

160 15 mortar 1:1 including neat cement finishing, watering etc. complete. 23.45 Rmt

161 10 Making Water connection from exi.Muni. Water line (N.S.) 250.00 No.

Providing and applying fibere reinforced cementitious

micro concrete work in cellings and beams incl.mixture

of CEMSCREED HM (F) fair mate company material,

162 2 FBR bonding agent material with water in suItable 530.00 Smt

proportion anti corrosive treatment on exposed beam,celling steel

bars with safeCore R incl.all kind of labour etc.comp.including

three coat of white wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or submarcible

water pumps withmotor and required cable and switch board of

approved brand and make etc.comp.as directed.

.Providing TMT Bar FE 415 reinforcement for R.C.C. work including

163 a 105 bending, binding and placing in position complete up to floor two level 66.59 Kg.

ProvidingTMTBarFE500/500Dreinforcement for R.C.C.workincluding

bending,binding and placing in position complete upto floor two level

b 100 placing in position complete upto floor two level placing in position 75.46 Kg.

complete upto floor two level

Providing and fixing 30mm thick solid both side prelam PVC door

164 10 shutter (sintex door-equivalent) with necessary alluminium fitting with 2867.00 Smt

EL-7 section frame

Conveyance charge of Earth,Lime, Murrum, building rubbish earch

165 50 manure or sludge and excavated rock and fly ash,aggregate of any 235.51 Cu.M.

kind etc.comp.upto 5 km lead.(L.S.)

Providing and laying polished granite stone slab 18 mm thick in risers

of steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1

cement:3 coarse sand) and jointed with gray cement slurry including

rubbing & polishing etc.complete.

Wall panelling with 12 mm MDF fixed to existing alluminium

framing and making grove as per design and finished with royal

plastic paint as per instruction of engineer incharge. (N.S.)

Providing and laying 15mm bamboza wooden flooring as

per architect's drawing with all necessary details as

168 1 directed by the project consultants. Use underlay for better 2690.00 Smt

result as per Detail specifications and directed by the project

consultants. (N.S.) (Approved Rate )

Applying two coats of Birla (whitecementbased) or

Asian (acryliclapy-putty) or equivalent & two coats of primer of

169 10 approved brand and manufacture on new wall surface to give an 40.19 Sq.M.

even shade including thoroughly brushing the surface free from

mortar dropping

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape evenshade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Providing and fixing flush door shutters, solid core

construction with frame of first class hardwood with cross board

and face veneer or plywood face panels, with both side 1 mm

laminate finishing including anodized aluminum butt hinges

with necessary screws. Decorative type and pine wood core

anodized minimum 3 no 150 mm long aluminum butt hinges in

flush door shutters with 2 no of brass holdfast 325 mm long

171 2 no brass tower bolt 250 mm long and two no of 150 mm long brass 4686.36 Smt

door handle . Decorative both side laminated Flush door

mm thick. with frame of 10 cm x 7 cmt Indian teak wood frame

including all necessary fitting fixtures hardware screw and

adhesive etc fixing up to all lead and lift height up to 45 mtr from

GL etc complete as per direction of engineer in charge

P/M/F chainlink jali 8'x4' size as per details sketch & instructionof

engineer in charge same as lal darwaja garden pattern consisting of

3'dia. M.S black pipe 'A' class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4

block of 9"x9"x9" size chain link jali of size 2"x2"x10 gauge fixed in

35x35x5 mm MS angle frame 8'x4' size with MS flat of size 25x3 mm

welded jali etc.comp.The jali is to be welded to MS pipe with MS flat

as instruction given.The M.S pipe and the M.S angle frame are to be

painted one coat of primer and two coats of paint as directed in line

and level. (N.S)

Providing & Fixing masonary wall with porbandar lachiya stone with

well dressed grooveas per directed by engg.in charge for foundation,

plinth or super structure level (above plinth level upto floor two level)

in cement mortar 1:5 (1-cement : 5-fine sand) incl.pointing the joint

with white cement and yellow oxide powder in proportion to match

stone colour the joints should be thread grooved as per exi. lake

stone pitching apperance

(A) stone masonary wall/stone dressed single faced (size 15"x8"x9")

1 (B) stone coping (size 15"x8"x4") 510.00 Rmt

1 (C) stone coping (size 15"x8"x9") 790.00 Rmt

1 (D) stone column (size 15"x15") 10710.00 Cmt

1 (E) stone column top (size 20"x20"x9") 685.00 No.

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H Kerb

block for Footpath in M-20 grade using 20 mm nominal size

black trap aggregate of Sevaliya/Timbaor equivalent

quality for pre-cast blocks, reasonablyexposed

finish/ formwork , mould with well equippedwith vibratory

system for kerb stones of approved design including curing,

etc. complete, including thecost of formwork etc. complete. The

rate shall also include necessary cutting of asphalt,

fixing the Kerbstones in line and level on 5 cm thick sand

bedding withnecessary equipments and materials.

The rate shall also include the flush pointing in CM (1:3) for all

joints of the kerb stones. Filling of zari alone the sides of the

kerbstone fixed with Bituminous concrete

Bituminousconcrete / C.C. mixed in proper position to flush

withthe road surface as directed by Engineer in change to

form a portable mixture.a) Laying on 5 cm thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block Grey/Coloured

60 mm thick, M-35 Grade of any size shape (Usually Uni-Paver

Blocks) using black trap good quality aggragate of 20 mm nominal

size for footpath,parking areas, service lanes and other areas as

mentioned in the drawing / instruction of engineer in charge. Cost

includes formworks using rubber mould, Rate providing and laying

paver blocks as per required grading and specification. The paver

block shall be mechanically compacted. The work of paving blocks

shall be executed in line and level by skill mason of flooring work

only. It should be laid in such a way that the no cutting of the paver

block to be necessary. if cutting of paver block necessary then it

should be cut by machine only and carting. The finished surface of

the paver block shall have resonably good, plain finished. Paver

blocks shall be compacted and shall be relaid if necessary. Gravel or

such type of materials shall not be allowed for production. Laying on

5 cms thick sand

Provoding and fixing flush door shutters, solid core construction with

frame of first class hard wood with cross board and face veneer or ply

wood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non- decorative type and block board core

176 10 anodised alluminium butt hinges in flush door shutters (2) 35 mm

thick. Labour work for fixing any kind of paving with cement pointing

in CM 1:2, including watering, ramming etc comp. as dir.For pavement

I) Laying on Sand bedding as per requirement to fix the C.C.Block /

Nibhada Stone in Line & Level

Box type metal letters forming composite box made from 1mm thick

stainless steel plate of grade 304 having brush finish of following font

178 size to be fixed at Main Gate in english and or Gujrati and including

fixing charges approved before fixing by clent / consultant.

A 1 400mm high 1000.00 Nos.

B 1 300 mm high 750.00 Nos.

C 1 230 mm high 565.00 Nos.

Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both

side inclusive) as per IS : 277 and consisting of angle cleats of size

25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length

with nuts & bolts of required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm running at the spacing

of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having

lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every

179 5 junction, including fixing perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the perimeter of ceiling

fixed to wall/partition with the help of rawl plugs at 450 mm centre,

with 25mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help

of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including

jointing and finishing to a flush finish of tapered and square edges of

the board with recomme-nded jointing compound , jointing tapes

finishing with jointing compound in 3 layers covering upto 150 mm on

both sides of joint and two coats of primer suitable for board, all as

per manufacturer’s specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding

the cost of painting.

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow) 350 x

500 x 50 mm, Size per color End Cape 350 MM x 175 MM x 50 MM

TOP DESIGN - Lining Top flat ANTI SKID PATTERN FOR GRIP

COLOUR :- YELLOW & BLACK BODY MATERIAL :- MODIFIED

THERMOPLASTICS (Polymer Rubberized ) • ECO FRIENDLY

RECYCLE RUBBER Packing :- 4 pcs/ woven Bag Load Capacity :-

20 MT Fitting ( Fixing on TRAKE) :-4 holes & END CAPE :- 2 HOLE

HEX Bolts with Washer Epoxy for Bolt Fitting etc. complete as

directed by EIC .

Providing and fixing of Roller blind curtain/blackout. The fabric shall

be woven from formulated platisol extruded over a polyaster yarn.The

fabric shouldl be weaved to provide subtle view of the side of the

blind and should offer elimination of glare and sunlight radiance upto

a minimum of 80%.The fabric shall be flame retardant.

Providing and fixing PVC/Gpsysum plain colour false ceiling with

grid type with aluminium frame from gypsteel, fastners ,props,

Finishing as per architectural drawing allowing openings

182 1 for A.C. Diffusers, Light/Electrical Points etc –complete, Prior 933.00 Smt

to fixing on frame.(Brand : Anutone or equivalent ) (N.S.)

or as directd by engineer In Charge.

Provdg. & laying S.W. Gully trap with brick masonry chamber & water

183 2 tight G.T.Stone including fixing of covervSquare mouth trap 100 mm 1263.15 No.

x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter roundin cement

184 2 mortar 1:1 including neat cement finishing, waterin getc. complete. 23.45 Rmt.

Providing and laying (to level or slopes) and jointing with stiff mixture

of Cement Mortar in proportion 1:1 Salt glazed stoneware pipes

including testing of pipes and joints complete.(A) 100mm dia.

Providing and laying (to level or slopes) and jointing with stiff mixture

of Cement Mortar in proportion 1:1 Salt glazed stoneware pipes

including testing of pipes and joints complete.(B) 150mm dia.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for

single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete etc.

complete.(i)Inside dimensions 500mm x 700 mm and 450mm deep

for pipe line with one or two inlets.

Providing, supplying and fixing precast C.C. blocks (M-20) edge kerb

having size of 75 x 300 x 300 mm depth and as per design

189 5 conveying it to the site, jointing into C:M 1:3 and racking out the joints 219.00 Rmt.

incl. necessary excavation of asphalt, soil etc..completed.

Constructing a cooking Sandwich platform 60 cm. width and 70 cm

high resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii)

190 1 Fixing black Granitee 30mm thick laid on precast R.C.C. (1:2:4) slab 754.95 Rmt.

with plastering on exposed faces of wall in C.M. (1:4) etc complete

Providing and fixing hard drawn steel wire fabric 75mm x 25mm mesh

191 1 or weight not less than 7.75 kg. per Sq.M. to window frames etc. 754.65 Smt

including60 x 20mm beading of teak wood.

Providing & fixing 15 cm wide chicken mesh jali with nails & then

192 15 application of 15 mm plaster on R.C.C.& masonary joints as per dir.of 35.00 Rmt.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal size) laid

in one layer and finished with a floating coat of neat cement. (A)

Providing and constructing, Underground (U/G) water tank of

specified capacity, on specified location, for all depths, in

controlled CC of M-200 grade with bottom slab, top slab and RCC

walls, including cost of form work and reinforcement,with inside

and outside plaster in CM 1 :3 and water proofing treatment as

194 500 per IWP specification,including injection, grouting, etc. complete. 6.50 Litre

The rate includes for providing and fixing two nos. 0.6m. x 0.6 m.

size medium duty CI manhole cover/s at top, including wash out

pipe line and inlet and outlet connections etc. complete.

Providing and fixing PVC Printed pain colour false ceiling with grid

type with alluminium frame consisting of 600mm x 600mm 3mm

thick plain PVC sheet used as panel insert in a frame work made

using anodized alluminium T section of size 1 x 1 (235 x 25mm,

gauge or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x

195 5 600mm) The alluminium frame work is supported from the 300.12 Smt

cceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods of

required sizes to maintain proper level etc. The aluminium frame

work is supported on side wall with the use of alluminium L

section of size 1 x1 (25 x 25mm) angles etc. complete as per

direction of Engineer in charge. Manufactures specification and

Providing and supplying of labour for necessary manual

excavation, cleaning, Shifting of Material Or any other, or for any

other work as directed by Engineer In charge. The Rate includes

Handcart with Mazdoor

A 5 Mukadam/supervisior/karigar 425.00 No

B 10 Fitter/Plumber/Mason 697.00 No

C 5 WELDER/ Gas cutter at Day /night 689.00 No

Supplting of welding machine / gas cutter including cost of

D 4 welding rods/gas, Transportation, including carting from site to 1500.00 No

E 10 Mazdoor at Day Female 450.00 No's

E 10 Mazdoor at Day Male 493.00 No's

Supplying electric breaker machine for RCC slab or asphalt

demolishing work on site by using operator, fuel, power supply

etc.complete as directed. (no payment should be allowed for non

working condition of machinery and for pipe line excavation and

M.H. work. Allowed only for break down work) (Based on

Previously approved rate by CE sir )

Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

198 seal for potable water of following dia. Nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

A 10 15 MM DIA 165.21 Rmt

B 5 20 MM DIA 202.97 Rmt

C 5 25 MM DIA 247.25 Rmt

D 5 32 MM DIA 330.36 Rmt

E 5.00 40 MM DIA 437.66 Rmt

199 5 50 MM DIA 647.30 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without frame for

200 5 Gulley trap (Standard pattern) te weight of cover to be not less 491.80 Each

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2

working pressure polythene pipes of the following out side

201 Dia. Low densidy, complete with special falnge

compression type fittings, wall clips etc. including making

good the wall ceiling and floor.

Providing, Fabricating & Fixing signage's using 304 grade Stainless steel

1.5 mm thick brushed steel finish plate (2 nos) with 8mm thk. Acrylic

sheet covered with vinyl of approved colour, sandwiched between two S.S

plate and fixed with s.s struds . Sandwiched plates should be fixed in

12mm X 12mm S.S 1.5mm thk.304 grade frame and punched (laser cut)

202 10 69.00 Sqinch

lettering carried out on both the s.s plates of required size and text as

directed by Engineer and hanged to ceiling with the help of S.S 8mm thick

chain at both ends with making all the fixing arrangement to the ceiling

and to the plate etc. complete all As per drawings and design supplied by

architect and instruction given by authority and E.I.C.

Providing and applying approved coloured chips 20mm thick STONE

CREAT PLASTER for exterior / interior side on wall up to full height from

ground level consisting of 12mm thick backing coat of CM 1:3 (1 cement :

3 Bodeli sand) and 8mm thick finishing coat of CM 1:1 (1 cement (Grey /

203 5 White / Colour : 1 stone grit (approved coloured chips)) including 709.60 Sqmt

providing & fixing 300mm wide strip of chicken net at vertical and

horizontal joints of RCC and masonary including 10mm alluminium

channel for expantion joint / grooves, curing, necessary scaffolding in true

line and level etc. complete as directed by EIC.

Providing and laying plain dressed surface machine cut dhrangadhra stone

slab of approved quality for dedo, & risers of steps, etc. over 12mm

(Average) thick base of cement mortar 1:4 (1-cement : 4-coarse sand) or

L.M. 1.1.5 laid over and jointed with cement slurry including surface

dressing, rubbing, providing grooves, rounding the edges and polishing for

proper finishing etc. complete size & pattern as per drawing/instructions

of EIC/Consultant.

Proviging and Fixing Storage Shutter made out of 50mm X 25 mm Indian

Teakwood Frame and 18 mm Ply Board. With 1 mm thick laminate finish

in the front and 0.8 mm thick Laminate on Back Side with 12 mm thick

Indian teakwood beading. The scope also include providing and fixing s.s.

205 1.00 finish hardware as per the Requirement. The rate include cost of all 6805.00 Sq.mt.

labour, material and with all hardware like handle, magnate, tackels,

adhesive, screws, etc.for satisfactory completion of this items.All Exposed

Wood Work shall have malamine polish etc. complete.

Providing & Fixing Sun Control Reflective Type Film / Frosted Film as

206 1.00 Selected by Architect/ Engg. In Charge For Glass Doors / Windows etc. 646.37 Sq.mt.

Providing & Fixing in Position Vertical Roller Blinds with Minimum 3 %

and Maximum 5 % Light Transperace Screen Fabric Incuding Providing &

Fixing of Powder coated G- Channel at the Topof Window with necessary

Screw , Cleats etc. and PVC Roller ( Weight Pipe) and PVC Chain For Up

and Down Movement of Blinds etc. of Approved Make and as per

207 1.00 Drawings / Instruction of Engg. in Charge For All Colors and Shades. 1372.03 Sq.mt.

Rates Includes all Lead and Lift For All Floor Level, All Height , All

Material , Accessories, Fixing , Scaffolding , Labor etc. Complete in All

Respects. All Required Accessories & Material must be From Same

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

208 2.00 limpet washer or G.I. limpet washer. filled with white lead complete 719.93 Sqm

excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with

G.I. J or L Hooks, Bolts and nuts glavanised iron J or L Hooks Bolts and

nuts 8mm dia G.I. Limpet and bitumen washers complete

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or

welded in builtup for all type sections, in framed work, including cutting,

210 10.00 hoisting, fixing in position and applying a priming coat of approved steel 126.68 Kg

primer all complete as per the structural designs and directions of

Engineer in charge.Column ( 122 x 61 x 3.6mm )

Providing and laying 18 mm thick polished granite stone machine cut in

single piece (Max. available) in sill and jambs of door ,window,ventilation

& lift wall cladding,staircase flooring landing, risers & treads, skirting laid

over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and

211 1.00 jointed with grey cement slurry with matching pigment incl. rubbing and 3279.00 Sqmt

polishing,half rounding edge and incl. fixing of hilty fastener at every 1/3

span of sill as required size etc. complete colour and shed as approved

by architect engineer in charge.

Supply and Fixing of Auditorium seating Fabricate Auditorium

seating with Synchronized Push back Chair with Ergonomically

designed Poly Urethane foam for seat and back made my DOW

chemical with High Pressure moulding technology to achieve long

life performance, upholstered with stitched 3 Layer 100% Yarn

Dyed fabric Upholsteries. Chair profile with the seat in Normal

position and without a tablet arm should not be more than 75 cm.

Chair pushback mechanism should consist of 2 nos. x DIA 50 mm

ZYTEL Based Rollers which is supported by AXIAL shaft of DIA

mm is Driven by radial movement of 4 set of Swing Arms of size

25mm x 6 mm thickness with Orbital Riveted Solid Dia 8 mm

Barrel MS Rivets. The pushback movement is achieved by

212 1.00 synchronised movement of 04 links mounted on Two Number of 9990.00 No

triangular Symmetrical housing of size 27 cm x 23 cm duly

embossed for extra strength by 1.2 cm made up by 0.12 cm CRCA

compliance to IS 513. The entire mechanism should be made in

India and should have total weight 8.5 kg duly Powder Coated –

NO SPREAY PAINT Part should be used for the chair of The Seat

Size should be 42 cm x 48 cm the Back height should be 70 cm

with ergonomically designed seat and back cushions. Chair should

be available in 20”, 21”, 22” and 23” to use multiple seat size in

matching variable arch length. Approved Make WIPRO, Godrej,

TSI, HNI, Featherlite (Including Fitting and Transportation)