SPECIAL REPAIRS TO BUILDING NUMBER P-22 (COOK HOUSE) OF SIGNAL REGIMENT AT SHALATENG GARRISON UNDER AGE (I) CIF (K).

Amount

B/R items Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Demolition of cement concrete of any description in any position not otherwise specifically provided for, complete all as specified.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.

Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified.

25 mm thick plain cement concrete 1:2:4 , type B-0 (using 12.5 mm graded crushe stone aggregate) as in floor to receive the tiles/floor finishes rough finished complete all as specified.

Jointfree Non-skid coloured ceramic tiles (square/rectengular) 7 to 8 mm thick, of size 600 x 600mm as in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match shade of tiles, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified. complete all as specified. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

Jointfree Glazed ceramic tiles, coloured, of size (450 x 300mm), thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick bedding layer in cement mortar 1:4 complete all as specified. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified.

Machine cut kota stone slab flooring, 20-25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 15mm screed layer in cement mortar 1:4, rubbing, grinding and polishing to achieve mirror finish, complete all as specified.

Machine cut kota stone slab, 20-25 mm thick as in vertical surfaces such as skirting/dado etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 10mm thick plastering in cement mortar 1:4, rubbing, grinding and polishing to achieve mirror finish, complete all as specified.

16 to 18 mm thick, Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms/vertical wall clading etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick , CM 1:4 as in backing coat etc complete all as specified and directed.

Rounding to edges of stone slab like granite one edge, such as in steps, shelves, cooking platform and other similar situations including polishing, all as specified.

Taking down cement plaster, of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.

15 mm thick rendering on fair faces of brick/concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete, all as specified and directed.

15 mm thick rendering on surfaces other than fair faces of brickwork or stone masonry surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete, all as specified and directed.

Complete removal of existing treatment from wall surfaces, complete all as specified.

Preparation of surface and applying 2 to 3 mm thick wall care putty on plastered surfaces, complete all as specified and directed.

Applying two coats of oil emulsion distemper over a coat of primer on newly plastered surfaces of walls after preparation of surfaces, complete, all as specified and directed.

Preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint, over a coat of suitable primer complete all as specified.

Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified.

False ceilling using anodised aluminium T & L sections snap Grid frame work of size 610 x 610mm runners of size 15mm x 32mm including hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm, 40 mm long, complete all as specified and as directed.

605 x 605 x 9mm thick Gypsum tiles, moisture resistant, micro looks edge inserted to GI/ aluminium frame work complete all as specified

PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in surface channel and drains, complete all as specified.

Extra for forming fair finished drain or channel 20 to 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified.

Rotational moulded polyethylene water storage tanks of capacity 1000 ltrs, three layered (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm brass ball valve, high pressure with polythene float and flynut and wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed by Engr-in-Charge.

Taking up or down steel tubing and connections, 15 mm bore, including cleaning for refixing complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing and connections, 20 mm bore, including cleaning for refixing complete all as specified and directed by Engr-in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc. 10cm girth in brick/stone walls, complete all as specified.

Steel water tubing of nominal bore 15 mm, medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

Relaying/refixing after repairing/Cleaning thoroughly in old or new position obtained from above item No.27.00 including all fittings complete of size 15mm all as directed.

Steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

Relaying/refixing after repairing/Cleaning thoroughly in old or new position obtained from above item No.28.00 including all fittings complete of size 20mm all as directed.

Lagging to pipes of 20 mm bore plumbing all round with 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh covering with POP layer, complete all as specified and directed at site by Engineer-in-Charge.

S&F in repairs Stop valves, cast copper alloy, 20mm bore, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specifed.

S&F in repairs single lever sink mixer (wall mounted) with 200 mm (8") long swivel spout, connecting legs and wall flanges complete all as specified and directed. Make : CERA Cat Part No.F-1002531 or equivalent in Jaquar/Marc/Prayag.

S&F in repairs Sink without drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. and overall size 495 x 420mm with bowl size 410 x 330 x 160mm, complete all as specified & directed.

S&F in repairs Bib tap, 15mm bore, fancy type, long body, quarter turn, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs angle stop valve, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15mm complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified.`

S&F in repairs PVC waste pipe suitable for 32/38/40mm bore waste coupling fitted to stainless steel sinks, complete all as specified.

Dismantling of CI/PVC pipes, jointed in cement mortar and taking out of trenches or in floor or wall 75mm bore, complete all as specified.

PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.

PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & directed.

75mm size PVC (SWR) branch pieces, single Y/bends/Tee ( equal or unequal), complete all as specified.

PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified.

75 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and as directed.

PVC (SWR) vent cowl of size 75mm bore, complete all as specified.

PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement, dia of outlet 75mm, complete all as specified.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified.

Anodised aluminium frames with powder coating ( thickness of powder coating not less than 50 microns) for partitions, doors, window, ventilators with one or more rebates including necessary joining cleats, glazing clips, rubber packing, beading, screws, complete with all fittings including fixing base of partition/frame with floor, grills complete all as specified.

Anodised aluminium powder coated ( thickness of powder coating not less than 50 microns) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Anodised aluminium powder coated ( thickness of powder coating not less than 50 microns) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21, 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified.

Mild steel galvanised wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, wire staples or beading etc, complete all as specified.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and making good to floor, all as directed.

Aluminium 4 levers mortice lock, vertical type of size 75 mm and fixed to aluminium doors complete all as specified.

2nd class hard wood (Hollock/Sal/Kalasiris) plain, solid straight chowkats,and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints supplied and fixed complete, all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm, complete all as specified.

Extruded aluminium alloy handle, fabricated type, anodised, 100 mm long (ISI marked), complete all as specified.

Aluminium anodised, barrel tower bolt of extruded section and fixed, 150 mm long (ISI marked), complete all as specified.

75mm size hasp & staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified.

Preparation of old painted steel or steel based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified as directed.

Preparation of old painted wooden or wood based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint at any height and any place complete all as specified and directed.

Preparation of old decorated plastered or unplastered surfaces of walls and applying two coats of white wash on walls, complete all as specified.

Preparation of old decorated plastered or unplastered surfaces of walls and applying two coats of cement base paint on walls, complete all as specified.

18/19mm thick prelaminated particle board interior grade both side laminated with decorative choice laminations fixed with screws to timber frame work as in shelves/kitchen cupboard/almirah shutters all as specified and as directed.

18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in shelves/kitchen cupboard/almirah shutters all as specified and as directed.

Dismantling boarding of any description, fixed in any position with nails including cover fillets, complete all as specified.

External teak wood lipping 6 mm thick fixed with nails to 18/19 thick particle board, complete all as specified.

M&L Grinding, cutting & polishing to old floors, skirting/dado of Kota/Marble stone/Terrazzo in three grinding/cutting operation with marble and application of paint thinner with clear cloth and cleaning of floors and dispersal of rubbish complete all as directed.

E/M items Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders, brackets, bulk head fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items shall be made as per conditions separately ) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

Point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts grade and including PVC conduit of suitable size ISI marked ( concealed wiring) (as per conducter run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including sunk sheet steel terminal box made out of 1.6 mm thick MS sheet concealed in wall or on surface as per site requirement and making good disturbed surface of wall ,covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point/ fan point/exhaust fan/bell point etc controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item No.74 above, but for one 3 pin socket outlet 5 Amp on the independent board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item No.74 above, but for one 3 pin socket outlet 5 Amp on the same board with other switches, complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item No.74 above, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

Sheet metal enclosure double door shutter type for DB’s SPN, 240 Volts Single Pole and Neutral 12 way with 200 Amps rated bus bar complete all as specified and as directed by the Engr-in-charge.

MCB SPN 32 to 63 Amps, 240 Volts, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

MCB single pole 5 to 32 Amps, 240 volts, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

Switch piano flush button single pole one way 5 Amps, complete all as specified.

Socket outlet multipurpose 2 in 1, 3 pin, 5 Amp flush type, complete all as specified.

Switch socket combination 5 in 1, 5 Amp and 15 Amp flush type, complete all as specified.

Ceiling rose surface type, 65 mm x 50 mm two to three terminals/PVC/polycarbonate, isolated body fixed on PVC block, complete all specified and as directed by the Engineer-in-Charge.

36 Watt LED Light fitting 2ft x 2ft recess mounting ceiling light fitting flush to ceiling Aura I pairs super bright LED's with highly efficient light-smoothing optics to deliver superior illumination and energy savings year after year with LED tube light and connecting using suitable wire complete all as specified and directed including taking down old unserviceable. Make : Crompton Cat Part No.LCPL-36-CDL (2 X 2) or equivalent in Wipro/Havells/Bajaj/Philips/Syska.

LED Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use 18 watt LED 6000K with LED tube light and connecting using suitable wire complete including taking down old one, all as specified and as directed at site. Make :- Havells Cat Part No.LHEXBLP7PN1W018/Syska model No SSK-RA1801 or equivalent in Bajaj/ Crompton/Phillips/Wipro.

Angular type Lamp holder PVC polycarbonate type with back plate and providing LED 9 Watt lamp complete including taking down old one, all as specified and as directed at site. Make:- Crompton Cat Part No. LED-9WDF/CDL-BI or equivalent in Bajaj/Havells/Philips/Syska/Wipro.

Exhaust fan 300mm sweep single phase AC 220 Volts 50Hz supply PVC body with louvers and connecting including provn of 3 core flexible PVC insulated multi stranded copper conductor of size 0.50 Sqmm from ceiling rose/connector to fan, MS fixing brackets and other misc items required for fixing, complete all specified and as directed by the Engineer-in-Charge.

Refixing old serviceable light fittings any type complete, all as specified and as directed at site. General Note:- Credit schedule has been given separately under tender documents and shall be adjusted in general summary by the deptt. for arriving at net contract sum. .

M/S RAFIQ AHMAD SOFI AND SONS

M/S Alam Construction