Renovation work of the circle located near Ratan Burj in the Municipal Council Bundi area.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dry brick pitching or brick soling

In cement mortar.

Including dismembering

Dismantling of LT line /joist/rail pole (PCC 8/9 mtr height) with existing street light fixtures, brackets, top hamper, earth guarding bracket, insulators, stay etc with ACSR conductor, 3 phase/ single phase, one neutral one earthwire and one street light phase )

Removing of exiting damaged cantilever traffic post (incl. Signal head) and dismantling original foundation and refilling the same with earth and transportation of pole and signal head to store (within municipal limit) as required.

Earth work in excavation in foundation, trenches manholes, road side chambers etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils such as moorum, sand, sandy silt, clay black cotton soil, kankar, etc. For Kerb Stone Boundary wall Back Wall For Brick Wall Arc For Light Pole Concrete S shape Pathway Depth upto 1.5m .

Providing, laying and compacting plain/ reinforced cement concrete of specified grade in foundation/ leveling course/ pile cap using concrete mixer and vibrater complete including cost of form work, as per drawing and technical specifications and as per clause 1100, 1500,1700,2100 of MoRT&H specification including all scaffolding material, labour, machinery. For Kerb Stone Boundary wall Back wall For Brick Wall Arc Brick Flower pot For Light Pole Statue circular wall Bellow statue Fountain Concrete S shape Pathway PCC M15

Providing, laying and compacting design mix plain/ reinforced cement concrete of specified grade in foundation/ leveling course/ pile cap using batching plant, transit mixer and concrete pump and vibrater including cost of form work, complete as per drawing and technical specifications as per clause 1100, 1500,1700,2100 of MoRT&H specification including all material, labour, machinery, and maintenance of diversion. Statue Circular wall Footing Statue Circular wall Base Slab Wall Top Slab Fountain Wall Concrete S shape For Light Pole RCC Grade M -25

Brick work with FPS bricks of class designation 75 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) Brick Piller BacK wall Dediction Stair Wall Steps Brick Flower Pot

Supplying, fitting and placing TMT (Fe500) bar reinforcement infoundation/ sub structure/ superstructure at all level complete as per drawing and clause 1600 & 2200 of MoRT&H Specification including all material, labour, machinary etc. @ 80 Kg/M3

Providing and fixing precast cement concrete M-20 grade (Using mechanical Concrete Mixer) kerb stone top and bottom width 115 and 165 mm respectively, 250 mm high on 150 mm thick PCC M-10 grade foundation as per design, including fixing at site as per clause 408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.

Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:4 (1 cement : 4 coarse sand) Boundary wall Back wall For Brick Wall Arc

Random rubble dry stone Kharanja (soling) under floor. Below Statue BelowFountain

Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. In Plantation Area Below Interlocking Tile Brick Flower Pot

100mm thick

Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand)

Providing and fixing Stone jali 50mm thick Red/Pink sand stone as per ornamental design to fixed with white cement/epoxy mortar including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade. Boundary

Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately) : Red sand stone - exposed face fine dressed with rough backing. 30 mm thick. Back Wall Statue Wall

Precast terrazzo tiles 20 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade using white cement. Internal Flooring

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. For Copping

Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and fixing 1st quality MAT & GLOSSY finished ceramic tiles colour such as standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorption less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4) Size 250mm x 375mm

Finishing walls with textured exterior paint of required shade : : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm. Same as plaster Kerb Stone Stone Railing

tree @ 2m distance

Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. In rows 15 cm apart in either direction

For gate

Providing and fixing Red/Pink sand stone post (Mataga) having size 100x100mm heights 600 to 750 mm as per ornamental design such as like flower octagonal head border etc. to fixed with white cement/epoxy mortar including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

LED street light fixture 90 watt

2.5sq mm. Armored 4 core

175mm X 150mm X100mm

6 A to 32 A rating

8 SWG G.I. Wire

Decorative haritage pole in 4 Meter height. Pole upper section of length 3mtr is of dia 76mm and 1 meter bottom section of dia 114mm with decorative casting with base plate as per drawing. Provision for inside termination box with 4way connector & 1nos 6 AMPS MCB for local isolation with cover.Complete in all aspects with foundation bolts.

Providing & Fixing of ISO certified comp

Non BSR

Handi rani Statu Matrial :-FRP Sculpture Dia:- 5'6" Height:- 5'6"

Fountain

Light 18W, 12V nozzle mounting SS-body, fixture with water proof Light (IP 68) protected, dynamic color changing capability, toughen glass with elastomer sealed. Make: AE

Supply & Fixing of DCC Master Control Device for LED Lights,18W 12V DC,(powered By Edison )Rating :- IP65 Make: AE

Electrical Panel (MCB, OLR, Push button switch, light indicator, voltmeter, ammeter etc. Make: L&T, Snider, any approve make etc.), 16 gauge power coated body. Assemble by: AE

Electrical submersible cable complete in all respect of 4 core round 1.5mm copper conductor. Make: finolex/any approve make

Supply installation of complete system at site with PVC pipe fittings, tee bends, reducer, jointing compound with Trouble shooting of complete system mechanical and plumbing, installation complete in all respect. Make:any approve make