COMPREHENSIVE MAINTNANCE OF B/R AND E/M WORKS AT VARIOUS UNITS UNDER AGE B/R ALWAYE

Amount

Dismantling single layer mangalore pattern or similar tiles in roofing incl removal of vegitation nails etc complete all as specified and as directed

Material and labour for roof tiles, mangalore pattern, interlocking at side joints, laid dry with any height of roof , incl necessary scaffolding etc complete all as specified and as directed

All as per Item No 2 here-in-before but except tiles ( refixing in existing tiles ) complete all as specified and as directed

Material and labour ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed

Supply and fix in repair to ( dismantling timber scantling in any position with nails etc) Secind class hard wood clean swan as in scantling in framed work complete all as specified and as directed

Dismantling and refixing plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 incl one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) with MS frames or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Supply and fix in gypsum board 12mm thick in False ceiling fixed with screw as per manufacturers instructions complete all as specified and directed . (Frame work and hangers for ceiling shall be measured and paid separately)

Supply and fix anodised aluminium snap grid frame work for false ceiling with size of grid 605x605mm complete all as specified and directed

Supply and fix for light coloured hollow PVC wall pannelling of minimum 1.0mm tks with with necessary frame work with necessary fixtures fixed with necessaet frame works incl securing frame work and grid shall be provided as per Room Size requirement incl all fittings complete all as specified and directed

Taking down eaves gutters and rainwater pipes, drain pipes etc (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., complete all as specified and as directed

PVC (SWR or drain ) pipes, single socketed, in any length, with rubber rings 110mm bore fixed with necessary clamps complete all as specified and as directed

Supply and fix in repair PVC (SWR or Drain ) pipes, single socketed, in any length, with rubber rings 75mm dia bore fixed with necessary clamps complete all as specified and as directed

Supply and fix in repair 100mm to 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and as directed

Supply and fix in repair 75 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and as directed

Supply and fix in repair PVC (SWR) floor trap upto 75mm outlet , plain with grating including jointing with solvent cement including set with C M ( 1:4 ) complete all as specified and as directed

Supply and fix in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed

Supply and fix in repair to vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed

Supply and fix in repair to vitreous China wash down water closet pan (European type) with P or S trap, snow white or white colour, fixing bolts, in cluding connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, excluding flushing cistern and flush pipe including seat cover as in repair complete all as specified and as directed

Supply and fix in repair to vitreous china wash hand basin white flat back of size 550x400 mm ,including brackets,waste coupling and waste pipe , or fixed with existing plateform surfaces with sealent with white cement etc complete all as specified and directed.

Supply and fix in repair to half stall urinal vitreous China urinals, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. complete all as specified and directed.

Taking down and fixing in same postion only with repair to any type of Vitreous China urinals (Urinal, bowl type or half stall pattern,) basin only including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed.

Supply and fix in repair to 10 litres, cast iron, valveless. syphonic action type, flushing cistern, high level, with inlet, ball valve, float, chain and pull, and brackets IWC/EWC OR Angilo Indian type inclusive of brackets , and connections to pipes and fixing of chain and pull, or lever, if any complete all specified and as directed

Supply and fix in shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and as directed

Supply and fix in PVC connections 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed

Supply and fix in repair to Grating round 140 mm size of PTMT./CP (Minimum weight 50gms) complete all as specified and as directed

Supply and fix in repair to to Plastic water closet seat for EWC /Angilo indian type , black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

Fix in repair only in Joint between fluslhing pipe and socket of W.C. pan; pre-made complete all as specified and as directed

Repair only in high or low level fluslhing cistern with replacement of necessary washers ,push etc , and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and as directed

Fixed in repair only in existing Wash down water closet EWC (Pedestal pattern) with necessary white cement , fixing with bolt washers etc , complete all as specified and as directed

Supply and fix in repair to Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply and fix in grainte strip of door bottom sill upto 3cm wide & upto 0.90 m length of each piece incl with necessary adhesive paste etc complete all as specified and as directed

Supply and fix in sealing for ( M seal with adhesives ) metal area n exe 3 Sqcm, sheets bottom surface in roof , water tank , sheet , cladding gaps filling etc for arresting water complete all as specified and as directed

Supply and fix sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x 160mm complete all specified and as directed

Supply and fix sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

Supply and fix in repair to fancy type Mordern Stainless steel plate rack U utensils dish rack ) of size upto 750x750x250mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair of 20mm bore of CPVC pipes to fittings in trenches/walls/ceiling concealed in wall etc such as Elbow, Tee,Socket, Reducer,Bushing,Step over head bends, End cap, End pugs ,union ,tank nipple ,etc also included in special fittings of ( brass theating) ,male , female treads , adapters , tee & Reducers etc also making Suitable size of brass treaded to make a Complete Fittings of CPVC to match the CP/PTMT plumbing fittings as per std size also CPVC pipes shall be UV Stable, leak proof, tough, rigid and suitable for internal and external water supply applications incl CPVC yellow solvent cement to be used for pipe and fittings etc complete all as specified and directed.

All as per item No 40 here-in-before but 25mm bore pipe complete all as specified and directed.

Supply and fix in repair to CP 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair to 15mm bore CP fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair to15mm bore fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed..

Supply and fix in repair to 15mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed..

Supply and fix in repair to 15mm bore swan neck type Sink tap Fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all specified and as directed

Supply and fix in repair brass spindle and removing leakage of water for bib tap/pillar tap- stop cock15mm/20mm bore pipe complete all specified and as directed

Supply and fix in repairs 20mm long handle CPVC ball valve for 20 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent complete all as specified and directed .

Supply and fix in repairs 16mm CPVC ball valve for 15 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent complete all as specified and as directed

Supply and fix in repairs swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and as directed

Supply and fix in repairs towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and as directed

Taking down and refixing with repair in existing wash basins any type , vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of supply and fix waste pipe complete all as specified and as directed

Supply and fix in repair in 32mm bore waste coupling with waste pipe of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) for HWB ,Sink , etc complete all as specified and as directed

Supply and fix in repair to soap dish, vitreous China white or PTMT, approximate size 160x 160x90mm complete all as specified and as directed.

Supply and fix in repair to CP urinal spreader of size 180mm x 142mm x 73mm for fixing with 15 mm dia to 20mm dia pipe complete all as specified and as directed

Cleaning and preparing the surfaces of MS steel section and welding in repairs upto metal 10mm thickness with all necessary cleants,welded together in brocken sections with necessary repairs complete all as specified and as directed

Supply and fix in powder coated Anodised aluminium sliding type window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Supply and fix in powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Repairs only in aluminium windows of area n.exe 1.0 sqm in each shutter of any type incl replacement of beading , hinges , bolts,handles etc as per existing type and refixing the same opening complete all as specified and directed.

Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Material and labour for coloured Non Skid Ceramic of approved shade and pattern, of size 600mmx600mmx 9 to10mm ( exe 0.18 but not not exe 0.38 sqm each ) thick joint less as in floor set and jointed in cement slurry, over 15mm thick screed in cement mortar (1:6) and pointed with epoxy grouted with suitable pigment (mixed with white cement )to match the colour of tiles complete all as specified and directed.

Material and labour for non-skid ceramic tiles, coloured (of approved shade and pattern), 7 to 8mm thick, of superior quality, square / rectangular 300mmx300mm x6mm thick (area exceeding 0.06 Sqm but not exceeding 0.11 Sqm) , as in floors, etc ( with epoxy filling with 2mm spacers bar ) .set and jointed in neat cement slurry and pointed with colour pigment to match shade of tiles laid over & including 15mm thick screed bed in CM (1:4) complete all as specified and as directed

Material and labour for glazed ceramic tiles, coloured (light colour as approved), of size 300x 600 x7mm/ 350x250 x 7mm / 450X 350X 7mm /300x200x 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry beded in any mortor complete all as specified and directed.

Material and labour for granite tiles 18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar (1:6) complete all as specified and directed.

Taking down shutters exe 1 Sqm and n.exe 2 Sqm each and refixing with same opening after Resecuring or easing &adjusting /cutting with a required repair complete all as specified and as directeds

Taking down shutters not exe 1 Sqm each and refixing with same opening after Resecuring or easing &adjusting /cutting with a required repair complete all as specified and as directeds

Taking down chowkats or frames exc 1.5 sqm and n.exc 4 Sqm each with shutter (without taking off Shutter) incl windows , doors fixed portion etc complete all as specified and as directed

Material and labour plain solid, straight chowkats and frames of second class hard wood wrought framed rabatted on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Taking down shutters exceeding 1.0 Sqm but not exe 2 Sqm each complete all as specified and directed.

Material and labour factory made 30 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed.

Material and labour 30mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed

Material and labour 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing . M.S. stay shall be provided at the bottom to steady the frame as in repair ( incl taking Down u/s old PVC /UPVC/FRP Door shutters ) , complete all as specified and as directed

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthstuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame incl necessary handles on both side and towert bolts in each side all as per specification and drawing as per SSR Part-II 2020 complete all as specified and directed

Material and labour in repairs18-19mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter , shelves etc including 6 mm thick teak wood leaping on three sides and 20mm thich on hanging side & French polishing to edging complete all as specified and directed.

Supply and fix 300mm long (length of bolt in mm) aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fix in repair 300mm long (length of bolt in mm) aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fix 100mm long (length of bolt in mm) aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply and fix 75mm long (length of bolt in mm) aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed

Supply and fix 150mm (size of handle in mm) aluminium handles, cast type, anodised complete all as specified and as directed

Supply and fix 100mm (size of handle in mm) aluminium handles, cast type, anodised complete all as specified and as directed

Supply and fix 75mm aluminium handle ,cast type anodised complete all as specified and as directed

Supply and fix 100mm butt hinges(size of hinges in mm), medium weight, cold rolled, stainless steel, and fixed all as specified complete all as specified and as directed

Supply and fix 75mm butt hinges(size of hinges in mm), medium weight, cold rolled, stainless steel, and fixed all as specified complete all as specified and as directed

Supply and fix hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and as directed

Supply and fix 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed

Supply and fix in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.etc incl for aluminium window / doors etc complete all specified and as directed

Supply and fix for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.etc incl for aluminium window / doors etc complete all specified and as directed

Hacking out old broken glass (any thickness, size, quality) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed

Material and labour 2 nd class soft wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc..and removing old beads to store complete all as specified and as directed

Supply and fix in repair to 20mm dia powder coated aluminium curtain rod fixed with brackets , Knobs ,finial of 2 pieces ( Each side ) with necessary screews , plugs etc as in repair complete all as specified and as directed.

Supply and fix in repair to MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed

Supply and fix in aluminium extruted body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

Supply and fix in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm cover plate fixed in floor complete all as specified and as directed

Demolition of unreinforced cement concrete of any description complete all as specified and as directed

Material and labour plain cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate in roof and parapet wall junction ,post holes filling , roof/chajja benching, kerbs, mud stop, coping, rounded or chamfered on edges, filling rails embedded sec ,hold fast etc including necessary form work complete all as specified and as directed

Demolition of brick work/solid block work built in cement mortar including all quoins, pillars etc.complete all as specified and as directed.

Material and labour providing PCC solid blocks exc. 10cm in width type C1 1:3:6, 20mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and as directed

Taking down cement plastering any description on brick on stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and as directed

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cement complete all as specified and as directed

Material and labour for distempering to walls with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work well finshed complete all as specified and directed.

Material and labour finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed.

Preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for applying greasing / oiling and alinging in existing steel rolling shutters in any height and width with smooth Workable/rolling conditions as in rolling shutters without takking off shutters complete all as specified and as directed

Attending internal/external electric complaints for maintenance/breakdown round the clock for maintenance, checking, fault finding ad rectification of fault in LT Panels overhead HT/LT Lines, HT/LT underground cables, Transformers, Switchgears internal electric faults, fans etc including internal/External water supply complaints and carry out repairs and resume electric supply and water supply complete all as specified and as directed by Engr-in-Charge. Notes:- (a) Day to day complaint rectified by the electrician shall be written in complaint register and complaint document slip, rectified complaints only shall be measured and paid. Complaint attender shall have minimum qulification of ITI Electrician cum pumber having 2 years experiance of same nature of work is to be employed. (b) The spares required for rectification of faults shall be measured under relevent items. (c) All necessory tools shall be made available with the tecnician while executing the complaint. (d) All consumeables other than mentioned in schedules are deemed to be included in the rate quoted. (e) All kind of transport for the complaint attender/materials and mobile/cell charges are deeme to be included in the rate quoted. (f) All safety aspects are to be taken and if any accident/hazardous incidents happen during execution shall be the sole resposibility of the contractor. (g) Penalty of Rs 500/day for minor complaints and Rs 1000/- major complaints will be recovered from contractor if the complaint will not be rectified with in the effective period.

Supply and fix in replacement Switch piano, flush type single pole, one way 6 Amp, 230V complete all as specified and directed.

Supply and fix in replacement Switch piano, flush type single pole, two way 6 Amp complete all as specified and directed.

Supply and fix in replacement Bell push, flush type, 6 amp complete all as specified and directed.

Supply and fix in replacement Socket Outlet flush type, 6 A complete all as specified and directed.

Supply and fix in replacement Switch socket combination 2 in 1, 6 A flush type complete all as specified and directed.

All as per item No 115 here-in-before but 6A/16A, 5 in 1 complete all as specified and directed.

Supply and fix plug top 3 pin 16 Amps, 240 volts, bakelite body, complete all as specified and directed.

Supply and fix replacement Bell musical (ding dong type) , AC, 230 volts, single pole complete all as specified and as directed

Supply and fix stepped type electronic fan regulator flush type, hum proof, AC 240 V, 5 Step two module complete all as specified and directed.

Supply lamp holder, pin type, insulated body with back plate suitable for battern fittings AC, 240V, complete all as specified and directed.

Supply LED tube light fitting of 20 watt, 230V, with Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 110/125 lumen/watt complete all as specified and directed.

Supply LED tube light fitting of 10 watt, Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 100 lumen/watt complete all as specified and directed.

Supply LED tube lamp suitable for 4 feet, 18/20 watt complete all as specified and directed.

Supply CIMFR certified flameproof LED battern ftg suitable for twin T8 tube of 20 watt. Recommended for Gas/Vapor group of llA & IIB and one 1 & 2, IP65 Protected complete all as specified and directed.

Supply CIMFR certified flameproof LED battern ftg suitable for single T8 tube of 20 watt. Recommended for Gas/Vapor group of llA & IIB and one 1 & 2, IP65 Protected complete all as specified and directed.

Supply CIMFR certified flameproof LED ftg 60 watt wellglass in die cast aluminium housing heat esistant toughened glass. Recommended fvor Gas/Vapor group of llA & IIB and one 1 & 2, IP65 Protected complete all as specified and directed.

Supply and fix in replacement modular switch 1 way 6A,1 module, complete all as specified and directed

Supply and fix in replacement modular switch 2 way 6A,1 module complete all as specified and directed.

Supply and fix in replacement modular bell push 6A 1 module complete all as specified and directed.

Supply and fix in replacement modular socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in replacement modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in replacement modular fan step regulator, 120W - 2 module complete all as specified and directed.

Supply and fix in replacement flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and directed.

Supply and fix in replacement Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Supply and fix in replacement MCB SP 6 to 32 Amps, 220 volts, 10 KA, 'C' Series complete all as specified and directed.

Supply and fix in replacement MCB SPN 25 to 32 Amps, 220 volts, 10 KA, 'C' Series complete all specified and as directed

Supply and fix in replacement MCB TPN 63 Amps, 415 volts, 10 KA, 'C' Series complete all specified and as directed

Supply and fix in replacement RCCB Double pole, 30mA, 25A complete all specified and as directed

Supply and fix in replacement RCCB 4 pole, 30mA, 63A complete all specified and as directed

Supply and fix in replacement LED 2 x 2 feet fitting, 36W, 230V,with CRCA Powder coated housing and high quality PC Diffuser, efficacy of 120 Lumen/watt , THD <10,L70 B50, , PF >0.95, with seperate driver module , complete with all accessories internally pre-wired and incl connecting up with twin core twisted flexible copper conductor cable with suitable size complete all specified and as directed

Supply and fix in replacement LED downlighter of 12 watt, 230V Sleek surface mounted pressure die cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver easy to install complete all specified and as directed

Supply and fix in replacement capacitor 2.5/3.15/4 mfd, 240 volts, AC suitable for fans etc complete all specified and as directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all specified and as directed

Material and labour for one light point wiring on surface/cieling/Trusses/concealed controlled by one switch with PVC single core sheathed copper conductor multistranded cables FRLS 1.5 sq. mm size drawn through and including PVC conduit of suitable size and all acessories, fire resitant, ISI Marked including 2 mm thick 60mm depth GI sheet pressed terminal box (recessed) with 3mm thick laminayed hylem sheet top cover including PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sq.as earth continuty conductor and makingn good the disturbed surfaces of walls/floors/ceiling etc complete all as specified and directed.

All as per item No 143 here-in-before but one ceiling fan point controlled by one switch complete all specified and as directed

All as per item No 143 here-in-before but one Exhaust fan point controlled by one switch complete all specified and as directed

All as per item No 143 here-in-before but one 3 pin socket outlet 5 amps on the independent board complete all specified and as directed

All as per item No 143 here-in-before but one 3 pin socket outlet 5 amps on the same board with other switches complete all specified and as directed

All as per item No 143 here-in-before but one bell/buzzer point controlled by one push button on the same board with other switches or independent complete all specified and as directed

All as per item No 143 here-in-before but for one light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all specified and as directed

All as per item No 143 here-in-before but with cable 2.5 sqmm for One 3/5 pin socket outlet 15 amps on the independent board complete all specified and as directed

Material and labour For One light point wiring on surface/cieling/Trusses/concealed controlled by one switch with PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sq. mm size drawn through and including stove enamelled steel conduit of suitable size and all acessaries, fire resitant, ISI Marked including 2 mm thick 60mm depth GI sheet pressed terminal box (recessed) with 3mm thick laminated hylem sheet top cover including PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sq.as earth continuty conductor and makingn good the disturbed surfaces of walls/floors/ceiling etc complete all as specified and directed.

All as per item No 151 here-in-before but with cable 4 sqmm for One 3/5 pin socket outlet 15 amps on the independent board complete all as specified and directed.

Supply and fix in repair ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

Material and labour for submain wiring with 2 runs of single core 1.5 sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked alongwith 1 runs of 1 sqmm multistranded insulated copper conductor cable as earth continuty conductor drawn through and including PVC conduit of suitable size on surface/ recessed as required. Note : 2 Runs of PVC wires of 1.5 sqmm and 1 run of 1 sqmm earth wire and one run conduit will be measured as one unit) complete all as specified and directed.

Material and labour for submain wiring with 2 runs of single core 2.5 sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked alongwith 1 runs of 1.5 sqmm multistranded insulated copper conductor cable as earth continuty conductor drawn through and including PVC conduit of suitable size on surface/ recessed as required. Note : 2 Runs of PVC wires of 2.5 sqmm and 1 run of 1.5 sqmm earth wire and one run conduit will be measured as one unit) complete all as specified and directed.

Material and labour for submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked alongwith 1 runs of 2.5 sqmm multistranded insulated copper conductor cable as earth continuty conductor drawn through and including PVC conduit of suitable size on surface/ recessed as required. Note : 2 Runs of PVC wires of 4 sqmm and 1 run of 2.5 sqmm earth wire and one run conduit will be measured as one unit).

Material and labour for submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked alongwith 1 runs of 4 sqmm multistranded insulated copper conductor cable as earth continuty conductor drawn through and including PVC conduit of suitable size on surface/ recessed as required. Note : 2 Runs of PVC wires of 6 sqmm and 1 run of 4 sqmm earth wire and one run conduit will be measured as one unit) complete all as specified and directed.

All as per item No 157 here-in-before but drawn through ERW Steel conduit complete all as specified and directed.

Supply and fix in repair sheet metal enclosure for MCB DB Triple pole and neutral 4 ways, 415 volts with 200 Amps rated bus bar, double door complete all as specified and directed.

Supply and fix in repair sheet metal enclosure for MCB DB Single pole and neutral 4 ways, 240 volts with 200 Amps rated bus bar, double door complete all as specified and directed.

Supply and fix in repair sheet metal enclosure for MCB DB Single pole and neutral 8 ways, 240 volts with 200 Amps rated bus bar, double door complete all as specified and directed.

Supply and fix in repair sheet metal enclosure for MCB DB Single pole and neutral 12 ways, 240 volts with 200 Amps rated bus bar, double door complete all as specified and directed.

Supply and fix in repair thermoplastic polycarbonate Energy meter enclosures with hinged lid and plane side. walls - environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anticorrosive, degree of Ingress Protection IP 65 in accordance with IEC 60529, gasket material of enclosure is Polyurethane; while the gasket is internally embedded for single phase one meter. size 600 x 300 x 170 mm complete all as specified and directed

All as per item No 163 here-in-before but of size 600 x 600 x 170 mm complete all as specified and directed

Taking down and refixing of electric energy meter single phase including all fixing acessories complete all as specified and directed

Supply and fix in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 10A complete all as specified and directed

Supply and fix in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 20A complete all as specified and directed

Earthing complete with galvanised steel earth plate electrode 600 ×600 × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 using 20mm graded aggregate, common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 using 20 mm graded aggregates, with 8mm CTD bars @ 100mm c/c in both ways, including necessary testing on completion including dismantling old one complete all as specified and as directed. Note:- The unit rate shall also include for excvation, earth work in hard/dense soil PCC 1:3:6 type C1 pit, RCC cover slab 300 x 300 x 50mm, GI funnel with 20mm dia watering pipe of 1.5 m long, wire mesh, 15mm dia light grade GI protection pipe for earth lead not less than 7.5 m etc.

Taking down fan, any size any make from various satellite area locations, for repair/replacement of defective parts and rehanging/refixing in its original location after reconditioning complete as specified and directed for cieling fan of size 1200/1400 mm sweep, wall fan/Exhaust fan upto 450mm sweep. Note:- Items for reconditioning will be measured and paid separately under respective items of BOQ.

Material and labour for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed

All as per item No 170 here-in-before but for wall fan/Exhaust fan upto 450 mm sweep complete all as specified and directed

Material and labour for removing the burnt out winding, cleaning slots, rewinding the motor with super enamelled copper wire of equivalent size to the original winding including warnishing, drying etc replacement of body screws, testing and commissioning on full load for 8 hours continous runing for Ceiling fan 1200/1400mm sweep complete all as specified and directed

All as per item No 172 here-in-before but for wall fan/Exhaust fan/Pedestal fan upto 450 mm sweep complete all as specified and directed

Supply and replace ball bearing made out of high carbon steel as per existing suitable for Ceiling fan any type any size complete all as specified and directed

Supply and replace bush bearing made out of brass alloy as per existing suitable for ceiling fan any type any size complete all as specified and directed

Taking down defective geyser of capacity 25/50 ltrs of any make from its existing position after disconnecting inlet/outlet water connection and opening of geyser for checking and repairing the defective parts, including testing the same after repairing, refixing the same on its original position and making all connections complete all as specified and directed

Supply and replace heating element 1.5/2 KW, 240 volts, AC any type with heat resistant rubber washer complete all as specified and directed

Supply and replace fusible plug with inernal or external threading for suitable for 25/50 ltrs capacity geysers any type complete all as specified and directed

Supply and replace non return valve made out of brass 15mm bore complete all as specified and directed

Material and labour for Painting of geysers complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed

Material and labour for making four Nos holes in wall grouting 4 nos rag bolts of size 125mm long x 12 mm dia with PCC including necessary nuts and washers for 25/50 ltrs cap of geysers on wall complete all as specified and directed

Supply and replace inner assembly made out of brass with chromium plating, suitable for any type of geysers of 25/50 ltr capacity complete all as specified and directed

Material and labour for filling the glass wool between outer cover and inner tank of geysers 25/50 ltrs capacity including removing old one complete all as specified and directed

Supply & replace pressure/air release valve suitable to fix in inlet of geyser, made ut of brass mm bore complete all as specified and directed.

Material and labour for disconnecting from position, servicing at same location including cleaning of interior parts and body with solvent materials, replacement of unserviceable spares/parts if required.necessory repairs, connecting, testing and commissioning of water cooler upto 120 ltrs, ozone based filter type hot and cold water cooler 85 ltrs capacity, refrigerator upto 310 ltrs cap complete all as specified and directed. Note:- Spares will be measured and paid separately.

Material and labour for factory reconditioned hermatically sealed compressor unit suitable for water cooler upto 120 ltrs, ozone based filter type hot and cold water cooler 85 ltrs, Refrigerator upto 310 ltrs, Split type Airconditioner upto 3 TR for exchange of the existing unserviceable sealed compressor unit including initial charging of gas and oil complete all as specified and directed

Supply and fix in repair condensing coil made out of copper tube and aluminium fins suitable for Split AC upto 3 TR, water cooler upto 120 ltrs, Refrigerator upto 310 ltrs including necessory brazing , gas charging, leak testing, vaccumising etc complete all as specified and directed

Supply and fix in repair evaporator coil made out of copper tube suitable for refrigerator of capacity upto 310 ltrs complete all as specified and directed

Supply and fix in repair filter carbon suitable for Hot and Cold water cooler complete all as specified and directed

Supply and fix in repair main board suitable for Hot and Cold water cooler complete all as specified and directed

Supply and fix in repair power supply PCB suitable for Hot and Cold water cooler complete all as specified and directed

Supply and fix in repair solenoid valve suitable for Hot and Cold water cooler complete all as specified and directed

Supply and fix in repair pressure pump suitable for Hot and Cold water cooler complete all as specified and directed

Supply and fix in repair heater coil suitable for Hot and Cold water cooler complete all as specified and directed

Supply and charging refrigerant gas upto required level including connected works such as pressure testing leak test with nitrogen before filling refrigerant gas complete for split AC upto 3 TR, water cooler upto 120 ltrs, ozone based filter type hot and cold water cooler 85 ltrs, Refrigerator upto 310 ltrs complete all as specified and directed.

Material and labour For servicing of Split AC indoor/outdoor unit upto 3 TR comprising through cleaning, lubricating of all moving parts, replacement of wornout screws, bolts, rectifying electric wiring, deffects etc to make the unit for smooth functioning complete all as specified and directed

Supply and replace capacitors 6/10/36 mfd complete all as specified and directed

Supply and replace capacitors 80/100/120 mfd and 45 + 6 mfd complete all as specified and directed

Supply and replace starting relay suitable for Split AC upto 3 TR, Water cooler upto 120 ltrs, Refrigerator upto 310 ltrs cap complete all as specified and directed

Supply and replace thermostat unit hot/cold suitable for Split AC upto 3 TR, Water cooler upto 120 ltrs, Refrigerator upto 310 ltrs cap, ozone based filter type hot and cold water cooler 85 ltrs and Geysers 25/50 ltrs complete all as specified and directed

Supply and replace overload protector suitable for Split AC upto 3 TR, Water cooler upto 120 ltrs cap complete all as specified and directed

Supply and replace magnetic door gasket of Refrigerator upto 310 ltrs cap complete all as specified and directed

Supply and replace top cover gasket of Water cooler upto 120 ltrs cap complete all as specified and directed

Suply and replace blower/condensor fan motor complete with necessory mounting bracket and base frames for split AC upto 3 TR and water cooler upto 120 ltrs cap complete all as specified and directed

Supply and fix Air filter suitable for 1.5/2/3 ton split AC complete all as specified and directed

Supply and fix insulation for copper tubes of split type AC units, insulation type superion of size 3/8" diameter complete all as specified and directed

Supply and fix insulation for copper tubes of split type AC units, insulation type superion of size 5/8" diameter complete all as specified and directed

Supply and fix in repair copper tubing soft grade suitable for split type AC suction/discharge line of size 5/8" diameter complete all as specified and directed

Supply and fix in repair copper tubing soft grade suitable for split type AC suction/discharge line of size 3/8" diameter complete all as specified and directed

Supply and fix in repair PCB circuit board complete suitable for 1.5/2/3 ton split AC complete all as specified and directed

Supply and fix in repair push cock/tap as per existing upto 120 ltrs capacity water cooler complete all as specified and directed

Note :- All minor complaints will attn by daily ( day to day ) basis & major complaints to be finalised for weekly basis. Every complaints will assign for as per direction of Engineer in Charge So Contractor shall be depolyed an empoyee for attenting daily basis complaints. Failure to attend complaints will result in non-attendnce panality for each complaints is applicable as per rules .

ELAN ENGINEERS (BID ID -3358412)

Kuriako Mathai and company (BID ID -3358864)

WELTRONENGINEERINGSERVICES (BID ID -3358367)

M/s.Rejoy Constructions (BID ID -3358871)

CREATIVE BUILDERS (BID ID -3359661)

Bell Builders (BID ID -3358365)

M/S AARJAY ASSOCIATES (BID ID -3359046)