E-tender for Office Renovation Works at Thiruvananthapuram

e-tender for Office Renovation Works at Thiruvananthapuram For more details refer tender documents

Ceiling Work providing and fixing fall ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating and consisting of angle cleatswith flanges centre to centre, one flange fixed to the ceiling with dash fastener bolts, other flange of cleat fixed to the angle hangers of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels running centre to centre, to which the ceiling section with tapered flanges having lips centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips G.I. wire at every junction, including fixing perimeter , the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at centre, with drywall screws including fixing of gypsum board to ceiling section and perimeter channel with the help of drywall screws of size, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes ,grills, diffusers, cutouts made with frame of perimeter channels suitably fixed. With Painting changing fan Rad etc…

Ceiling Panel LED Light Ceiling LED Panel light 15V With Electrical wiring all Connections

Strip light Led Profile Ceiling Led profile Light using some point top of Principal Table

Electrical Work and Net Working Old Electric Line fully Remove and inside the Ceiling Change Some Electric Point and fan rod length increase Network point and network switch extension wall fan wiring etc…

Old AC Refitting Old AC Completely Removing and Changing position and gas Refilling copper pipe cutting and extra installing etc

Aluminium Partition CA Room Supply and Installation of Aluminium Partition: consisting of Aluminium Sections 63.5 MM X 38.1 MM X 1.0 MM thick hollow anodized of Jindal / Hind Alco make conforming to IS733 and IS 1285. The anodizing shall be transparent and complying IS 1868 (minimum anodic coating of grade AC 15). The Sections would be installed at an interval of 3’6” vertically and bottom section of Aluminium snap beading for glazing/paneling etc. and 5 mm thick float Transparent Glass including providing screw less aluminium glazing clip. Bottom up to 3’ Ht Will be provided with 8 MM thick both side pre-laminated particle board flat pressed 3 layer conforming to IS12823 Grade I type II of of interior grade complete with fixing clips, fasteners, filling up of gaps at junction, top, bottom, & sides with required PVC/Neoprene felt etc.. The joints shall be smooth, mitred and jointed with cleat angle etc…

Wall Fan Good Quality Wall Fan Orient wall fan with 1325 Rpm, Metal body wall fan, 450 Mm wall fan , 2 years warranty fan , Air Displacement in m3/Hour: 6030

Half Door Principal Room Half Door Partition using high quality stainless steel hinge, hard texture, not easy to crack, durable, hand-made, metal hinge, not easy to rust, long service life

Painting Work Principal Room Painting work cleaning the wall and painted with emulsion paint of approved quality & Colour two coats by roller after finishing Rate quoted Shall include all material labour Charges Cost of conveyance