Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.4 LAccepted-AOC KORAMANGALATH HOUSE TOMY LANE SOUTH PANAMBILLY NAGAR KADAVANTHRA P O KOCHI 682 020 | KOCHI | ERNAKULAM | KERALA | 682020 | L1 | Accepted-AOC being lowest | |
| 2 | L2₹23.8 L+₹2.1 L (9.92%)Rejected-Finance 40 608A PULLOMPARAMBLI HOUSE MANDAKKARA ROAD KOCHI 682 018 | KOCHI | ERNAKULAM | KERALA | 682018 | L2 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
30 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE FORT KOCHI
GE FORT KOCHI 682001
AS PER TENDER DOCUMENT
2022_MES_531240_1
8804/E8/GEFORTKOCHI
Open Tender
Civil Works
Item Rate
180 days
GE FORT KOCHI
AS PER TENDER DOCUMENT
8 documents required · 8 mandatory
₹500
GE FORT KOCHI
₹48,000
Yes
30 Sept 2022
16 Jun 2022
1 Aug 2022
16 Jun 2022
30 Jul 2022
16 Jul 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed
M&L PCC 40 mm thick (average), type B-1, 1:2:4, using 20 mm graded stone aggreage as in levelling the undulated floor area all as specified and as directed.
M&L 20 mm thick screed bedding layer in cement mortar 1:4 for laying kota stone in stairs/cooking platform all as specified and as directed.
M&L 15 mm thick screed bedding layer in cement mortar 1:6 for laying floor finishes tiles all as specified and as directed.
M&L joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.
M & L machine cut kota stone slab flooring 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in steps, skirting, stair case, not more than one piece to stair case all specified and as directed.
M&L for rounding to edges of stone slab one edge , such as in steps , cooking paltforms , and similar situations, all specified and as directed.
M&L for chipping and remove all damaged and de bonded concrete and plaster from the RCC slabs by manually or mechanically so as to expose the corroded reinforcement bars, removing the debris with in a lead of 100 meters as directed by Engineer-in-charge .
M&L for supply and application of Nitobond EP (Manufactured by M/s Fosroc chemicals India Ltd) epoxy bonding agent over the old concrete surface complete all as specified and all as directed by Engineer-in-charge.
M&L for supply and application of rust remover/converter (Rebaklense RR of M/s Fosroc Chemicals India Ltd.) or Amandur ,(manufactured by GK technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after application complete all as directed by Engineer-in-charge.
M&L for plastering with Nitobond SBR (Styrene butadin polymer bonding agent cum cement mortar/concrete modifier Manufactured by M/s Fosroc Chemicals India Ltd) modified cement mortar (1:4) under the slab to an average thickness of 40 mm , including the cost of all materials rent of tools and labour charges etc complete all as directed by Engr-in-charge.
Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc.all specified and as directed.
M&L for rendering cement plaster 15 mm thick in two coats (10 mm thick in cement mortar 1:4 and 5 mm thick in cement mortar 1:4) mixed with water proofing compound) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all specified and as directed. (Note- Water proofing compound shall be measured and paid seperately) .
M&L for plastering in CM 1:6, 10 mm thick on walls finished even and smooth without using extra cement all specified and as directed.
M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of Exterior primer (Proffesional pack of Asian paints) over a coat of external wall care piutty n.exc 2 mm thick on new or old prepared plastered external surfaces and including scafoldings and cradles including hoisting and lowering as required with bracing , support complete all as specified. Note : Height of the Bldg is approx 12.00 mtrs.
M&L for 2 mm thick wall care putty on walls all as specified.
M&L for preparation of new plastered/unplastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.
Taking down old unserviceable aluminium windows/doors with frame exc 1.5 Sqm and grills complete all as specified.
Taking down old unserviceable aluminium ventilator/windows with frame not exc 1.5 Sqm and grills complete all as specified.
M&L for powder coated aluminium frame , shutters & sections for doors , windows , ventilators ,Cup boards ,including necessary rubber beading, locking arrangements etc. complete all as specified.
Supply and fix aluminium windows casement type (34 mm Series) powder coated aluminium sections with and including 5 mm thick plain sheet glass/frosted glass panes of openable type with rubber lining, Casement type (34 mm Series) sections for mosquito proofing windows with aluminium alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40 mm in three panes divided with mullion section sash bars and aluminium standard decco grills 10 mm thick, fixed in with 1.3 mm thick standard aluminium "F" channels etc complete with following sections of HINDALCO or equivalent:- (a) "H" frame 44.50 x 34.00 x 2.00 mm Section No 2082 (b) "Z" shutter 34.00 x 44.50 x 2.00 mm Section No 4124 (c) Mullion 57.00 x 34.00 x 25.00 mm Section No 9139 Note:- The rates are inclussive of SS friction hinges grade 304(Eye Max) for aluminium windows , jointing cleats, rubber beading, "U" channels, handles, locking arrangements etc. complete.
S&F in repairs door closer aluminium (extuded section) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.
Taking down existing water proofing treatment of any thickness from the roof including cement mortar bedding , PCC tiles,padding concrete if any, upto the RCC slab, removing debris off the premises and cleaning the roof complete all as specified
Cutting the V grooves on the terrace slab where ever cracks are observed and fill the grooves with Fosrocs heavy duty non shrink grout Convextra GP2 , coving all the 90 degree angles , slab/wall junctions with Conbextra GP2 all as per manufacturer's instruction complete all as specified.
M&L providing a levelling course of cement concrete type B-0, 1:2:4, using 12.50 mm stone aggregate, 40 mm thick maintains a slope towards the drain water pipes by adding a water proof admixture @ 250 ml per bag of cement. Note :-Admixture shall be measured and paid seperately.
M&L for rendering cement plaster in CM 1:3, 10 mm thick mixed with water proofing admixture of Fosroc/Pidilite or equivalent , all as specified and directed.Note :-Admixture shall be measured and paid seperately.
M&L for applying oil based bitumen primer @ 0.25 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4kg/sqm having softening point not less than 140 degrees C, longitudinal tensile strength not less than 650 N/Sqcm, tearing strength of 180 N by torch application including min 10 cm side over lap and 15cm end lap, applying a coat of blown grade hot bitumen 85/25 over membrane @ 1.2 kg/sqm and finishing the surface with solar reflective bituminous aluminium paint @ 10 Kg /Sqm all as specified.
Supply only liquid water proofing admixture complete all as specified.
Dismantling wrought iron or mid steel work of any description not otherwise provided for etc. all as specified and as directed.
S&F stainless steel grills/railings fixed to walls/floors of Grade-316 including all pieces, drilling holes, sweling, buffing, complete all as specified and as directed.
Demolition of PCC (un re-inforced) of any description and in any position not otherwie specifically provide for.
M&L PCC 75 mm thick, 1:3:6 (Type C2) using 40mm graded crushed stone aggregate as in as in plinth protection including finishing the surface even & fair , all as specified.
S&F in repairs drapery curtain rods 25 mm powder coated including ornamental brackets and fixing hooks and rollers,side dooms as per sample complete all as specified.
M&L in repairs for PVC (SWR) pipes 50 mm dia single socketed in any length with rubber ring joints fixed to wall GI brackets /clamps all as specified and directed ( the portion of pipe inserted to the masonery /slab shall be fixed with water proofing bathseal tape two way to the entire width of masonry/slab.) . Note:-Pipe are to be fixed away from the wall using suitable clamps and bolts all as specified.
S&F plain or chequered plates square cut or notched (ordinary or counter sunk) forming holes with riveted ,bolted or welded attachments conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.
Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and as directed.
S & F anodised aluminium snap grid frame work of grid size 605 x 605 mm thick for false ceiling complete all as specified
M & L in ceiling 4 mm thick non asbestose fibre cement bldg boards fixed or laid or insert to timber or GI or aluminium frame work with screws and applying two coats of OBD over a coat of white wash, complete alll as specified
M & L for precast RCC Cover slabs type B-1, 1:2:4 (20 mm graded stone aggregate as in slabs of drains including necessary form works.(Reinforcement will be measured and paid seperately) set in CM 1:4 complete alll as specified
M&L for TMT bar 10mm dia and over cut to length, bent to shape reqd incl cranking bending spiray for hooping for colums, hooking ends and binding with and incl mild steel wire (annealed)not less then 0.9mm dia complete alll as specified
M&L for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified
M&L for 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in sub base,finished even and fair complete all as specified and directed.
M&L for 50mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in flooring, finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new or old steel surfaces over 10cm width or girth and applying two coats of VX-polymer based anti corrosive paint over a coat of anti corrosive primer complete all as specified.
Dismantling structural steel work including doors, gates but excluding framed truss etc. all as specified and directed by Engineer - in - Charge .
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to Gde Fe410-O or Fe-250-O complete all as specified and directed.
S & F mild steel as in stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets etc. complete of and similar work conforming to Fe 410-W (Gde-E-250) quality-A all as specified and directed.
Taking down carefully copper/ aluminium point wiring (light, fan socket or power) complete,including fixture and fittings such as switches, ceiling roses, Pendants, regulators, sockets, light fittings etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface/location complete all as specified and as directed.
Taking down existing unserviceable sub main wiring from batten/conduit of any size including earth wire and removing from site complete all as specified and as directed
Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.
Taking down existing unserviceable service wire including all accessories and removing from site complete all as specified and as directed
M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, concealed PVC conduit Med grade 25 mm dia of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting wall/PCC, chases and making good disturbed surface to match with existing finish with plaster complete all as specified and directed
-Ditto- all as per item No. 52 here-in-before but for one ceiling fan/exhaust fan with cables 1.5 sqmm size.
-Ditto- all as per item No. 52 here-in-before but one 3/5 pin socket 5 Amps on the same board with other switches with cables 1.5 sqmm size.
-Ditto- all as per item No. 52 here-in-before, but one 3/5 pin socket 5 Amps, independent, with cables 1.5 sqmm size.
-Ditto- all as per item No. 52 here-in-before but for bell/buzzer controlled by one bell push button switch with cables 1.5 sqmm size.
-Ditto- all as per item No. 52 above but for 3/5 pin socket outlet 5/15 Amps, independent with 2.5 Sqmm single core PVC insulated unsheathed 1100 Volts grade multi stranded copper conductor FRLS complete with 2.50 Sqmm stranded copper conductor PVC insulated unsheathed earth wire and connecting to earth dolly complete all as specified and directed.
M & L for submain wiring with two run single core PVC insulated unsheathed cable 1100 volts, grade having stranded copper conductor of 4 sqmm nominal cross sectional area FRLS drawn through PVC casing and capping including one run of single core PVC insulated unsheathed copper conductor of size 4.00 Sqmm for earth continuity conductor connected to earth dolly complete all as specified and as directed. Note :- Three runs of Copper Conductor of PVC insulated unsheathed 4 Sqmm & PVC casing caping will be measured as a single length.
M & L for submain wiring with two run single core PVC insulated unsheathed cable 1100 volts, grade having stranded copper conductor of 6 sqmm nominal cross sectional area FRLS drawn through PVC casing and capping including one run of single core PVC insulated unsheathed copper conductor of size 6 Sqmm for earth continuity conductor connected to earth dolly complete all as specified and as directed. Note :- Three runs of Copper Conductor of PVC insulated unsheathed 6 Sqmm , insulated unsheathed copper wire & PVC casing caping will be measured as a single length.
S & F switch piano flush type single pole, one way 230 Volts AC 5/6 Amps, complete all as specified and as directed.
S&F socket outlet flush type 2 in 1, 3 pin, 5 Amps, 230 Volts AC including necessary connection complete all as specified and as directed.
S&F switch socket combinationoutlet flush type 2 in 1, 3 pin, 5 Amps, 230 Volts AC including necessary connection complete all as specified and as directed.
S & F switch socket combination 5 pin, 5 Amps/16 Amps (multi plug) 5 in 1 flush type 230 Volts complete all as specified and as directed.
S&F Bell push flush type 5/6 Amps single pole 230 Volts AC for operating Bell/buzzer, including necessary connection complete all as specified and as directed.
S & F ceiling rose surface type bakelite 65x50 mm two to three terminal suitable for 230 Volts AC 6 Amps, complete all as specified and as directed.
S & F bell ding dong, AC 230 Volt single pole, including necessary connection complete all as specified and as directed.
S&F ceiling fan regulator 230 Volts AC Rotary Stepped electronic type 120/280V, including necessary connection complete all as specified and as directed.
MCB ,SP 06 to 32 Amps C series 10 KA breaking capacity 240 Volts all as specified and as directed.
MCB ,SPN 32 Amps C series 10 KA breaking capacity 240 Volts all as specified and as directed.
MCB ,SPN 40 to 63 Amps C series 10 KA breaking capacity 240 Volts all as specified and as directed.
MCB ,TPN 40 to 63 Amps C series 10 KA breaking capacity 415 Volts. all as specified and as directed.
S&F PVC rectangular block for mounting, switches, sockets, fan regulators etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm x 50 mm deep all as specified & directed.
S&F PVC rectangular block for mounting, switches, sockets, fan regulators etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm x 50 mm deep all as specified & directed.
S & F in renewal of distribution board sheet metal enclosure factory made fixed flush with wall inside the nitches or outside on wall surface suitable for mounting isolators & MCB's etc. 240 Volts, 200 Amps rated bus bar capacity SPN 12 way single door complete all as specified and as directed.
S & F in renewal of distribution board sheet metal enclosure factory made fixed flush with wall inside the nitches or outside on wall surface suitable for mounting isolators & MCB's etc. 240 Volts, 200 Amps rated bus bar capacity SPN 4 way single door complete all as specified and as directed.
S & F in renewal of distribution board sheet metal enclosure factory made fixed flush with wall inside the nitches or outside on wall surface suitable for mounting isolators & MCB's etc. 415 Volts, 200 Amps rated bus bar capacity TPN 4 way single door complete all as specified and as directed.
Supply and laying 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape or overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4 mm dia GI suspension wire, 2 core cable 10 Sqmm stranded aluminium conductor cable flat or circular complete all as specified and as directed.
-Ditto- all as per item No 77 as in above but 06 sqmm 02 Core.
Supply and Fixing in renewal of sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 AMPs complete all as specified & directed.
Decorative ultra slim linear LED lighting fixture with extruded AI, heat sink, environmental friendly, energy efficient 18 watt LED light fitting 4' long including LED Tube suitable for the fitting with all fitting arrangement and accessories, internally pre wired and including connecting with twin core twisted flexible copper conductor cable with suitable size upto ceiling rose complete all as directed above/Engg- in - Charge. Model No:LHEXBTP7UN1W018 ( DELITE LED PRIDE), Make: Havells or equivalent makes in Appendix 'C'
Earthing complete with GI earth plate electrode 60cm x 60cm x 6mm thick buried in ground vertically to a depth not less than 2.25 meters below ground level with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanised iron earth wire 4mm dia by means of bolts, nuts, check nuts, washers maade out of galvanised iron steel all as shown in electrical plate No 3 of SSR Part I and earth wire protected by galvanised pipe light grade 15mm bore and connected to LT panel/ pole through test point including necessary earth work and excavation in any type of soil, GI light grade 15mm bore watering pipe with funnel and wire brush, PCC 1:2:4 type B1 chamber with 20mm thick RCC 1:2:4 type B1 , covere slab with 6mm dia MS bars at 100mm c/c both ways with MS hook 6mm dia etc complete all as specified and directed and testing on complete
Taking down to ceiling fan/exhaust fan, sealing cable end, dismantling blades of any type, any capacity at any height and in any position and deposit to AGE E/M yard yard store for further disposal all as specified
Supply and fix and renewal the old fan with BLDC ceiling fan of 1200 mm sweep, 220 - 240 volts, AC, 50 Hz including wireless remote and hanging with fan hook, down rod up to 02 feet and connecting up with provn of 3 core copper flexible cable of size 1.5 Sqmm from ceiling rose to fan complete all as specified and directed.
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable sizeomplete all as specified and directed.
Supply & fix in repair of Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed.
Supply and fixing TV plug Co-axial socket modular type including necessary cable connection calling bell with volume control dimmers type complete all as specified and directed.
Supply and fixing two pin telephone socket modular type including modular plate and necessary cable connection omplete all as specified and directed.
Taking down unserviceable LT Cables of any type and any capacity from existing position complete, all as specified and as directed .
Taking down unserviceable GI Pipes of 80 mm bore from existing position complete, all as specified and as directed .
Supply, installation, testing and comissioning of weather and vermin proof indoor type LT Panel factory made, front & back openable double door type, CPRI approved, fabricated out of 2 mm thick CRCA sheet compartmentalized design including mild steel channel frame of ISMC 75 at the base of panel only for grouted wiht PCC using 20 mm graded stone aggregate, duly epoxy powder coated, complete with heat shrink insulated aluminium bus bar of 400 Amps rating 4 Nos, including all connections with aluminium strips, Pillar box shall be provided with danger notice plate with skull & bone sign, PVC gasketed and sealed, making all incoming and out going electrical cable connecetions with new lugs, glands to be provided at cable entries at the base of panel incl Taking down old unserviceable LT Panel board with connected items complete all as specified and as directed. The panel shall be comprising of following accessories:-
Incoming Side (i) MCCB, TPN 415 Volts, 50Hz,125 Amps, 36 kA, thermal magnetic release, Ics =100% Icu, front face isolataion with positive break indication with double break contacts with spreader and phase barrier - 01 Each (ii) Digital type Voltmeter 0-500 volts, 3 Phase, 4 digit, high resolution, LED type with one side programmability – 01 No. Make : Securemeters/Schneider/L&T (iii) Ammeter digital type (0-400 Amps) with copper wound CT coil assy of suitable ratio & size class I accuracy, 0.5 VA burden, & on site programmability – 01 Nos.Make : Securemeters/Schneider/L&T (iv) Indicator lamp with holder key flush mounted,LED type Red, yellow, blue with toggle switch– 03 Nos. (v) Bus bar strips made of copper of suitable size and suitable length of 400 amps rating – 03 Nos and 200 Amps for neutral Outgoing Side (i) MCCB,4 pole, 100 Amps ,25KA with thermal magnetic release of Schneider/L&T/ABB – 01 No (ii) MCCB,4 pole, 63 Amps ,25KA with thermal magnetic release of Schneider/L&T/ABB – 01 Nos (iii) MCB, SPN, 40 TO 63 Amps, ,16 KA with fixed thermal magnetic release – 08 Nos (iv) MCB, 1 pole,6 to 32 Amps , 10KA ,with fixed thermal magnetic release Schneider/L&T/ABB – 06Nos (vi) Spare compartment for future expention -02 Nos
Supply, install, testing and commissioning of CPRI approved factory made and tested indoor type wall mounted panel board 240 volts, 1 phase, 2 wire, 50 Hz, AC supply with copper bus bar panel board shall be weather proof with IP-54 protection and fabricated with 2 mm thick CRCA sheet and detachable gland plate of 2 mm thick duly powder coated after seven tank process . The panel board shall be double door openable from front side with suitable locking arrangement with keys. incl Taking down old unserviceable LT Panel board with connected items , the following accessories complete all as specified :-
(a) MCB ,TPN 63 Amps C series 10 KA breaking capacity 240 Volts. Make:- Legrand/L&T/SEMENS. - 01 Nos (b) MCB ,TPN 40 Amps C series 10 KA breaking capacity 240 Volts. Make:- Legrand/L&T/SEMENS. - 01 Nos (c) DOL Starter for open execution suitable for 5 HP pump Motorwith one digital ammeter – 06 Nos (d) Phase Indicator lamp with holder key flush mounted,LED type Red, yellow, blue with toggle switch– 01set (e) spare compartment for future expention -01 job
Supply , laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts , grade with stranded aluminium conductor,of size 35 sq. mm 3.5 core complete all as specified and directed by Engr-In-Charge.
Supply , laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts , grade with stranded aluminium conductor,of size 50 sq. mm 3.5 core complete all as specified and directed by Engr-In-Charge.
Supply , laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts , grade with stranded aluminium conductor,of size 70 sq. mm 3.5 core complete all as specified and directed by Engr-In-Charge.
M&L in repair for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanized iron strip size 32x6mm as earthing lead by means of bolt ,nuts, check nuts and washer of galvanized iron or steel besides welding of all joints as shown in drawing and including excavation and earth work, G.I.pipe light grade 40 mm bore for protection of G.I.strip from earth electrode to and including the earth test point of galvanised iron /steel of size 75 x75x 25 mm , supplying and laying charcoal dust, common salt PCC 1:2:4 type B-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 40mm up to 7.5 m shall be included in cost of above item.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. of 32 x 6 mm galvanised iron strip complete all as specified and directed.
M&L Galvanised Steel Tubing Pipe 80mm bore (dia), light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.
Disconnecting ,removing and shifting of existing AC Plants ,ducts including connected accessories from existing location to MES store yard including making good disturbed surfaces complete all as specified and directed.
Taking down aluminium/GI/copper strip of upto 32 x 6 mm from the inspection box to the earth pit//roof conductors/down conductors and disconnecting insulators from the multi stories buildings/structures/over head tanks etc including porcelain insulators, complete all as specified and directed.
Taking down the inspection box of any size, jointing togather copper/aluminium /GI strip with all accessories all as specified and directed.
Taking down earth with electrode/plate complete,all as specified and directed.
Taking down air termination aluminium/copper single pointed rod 12mm dia, 300 mm long all as specified and directed.
Taking down GI tubing medium grade 40 mm & 50 mm including dismantling PCC base/clamps all as specified and directed.
Supply and fix air termination, single pointed, Aluminium rod 12 mm dia and 300 mm long all as specified and directed.
M/L for test point terminal block made of gun metal or phosphorus bronze size 75 x75 x 25 mm drilled & screwed including 3 Nos 8mm dia 25 mm long hex. Head screw, all as specified and directed.
M/L for aluminium strip 25 x 3.15mm fixed on wall/structures of communication towers by using porcelain insulated clamps with welding base in towers and connecting to roof conductor/slove conductor/test point all as specified and directed.
M/L for GI strip 32X 6 mm fixed on wall/structures of communication towers by using porcelain insulated clamps with welding base in towers and connecting to roof conductor/slove conductor/test point all as specified and directed.
Supply and fixing for mild steel galvanised iron water tubing 40mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Laid in trenches complete, all as specified and directed.Note:- Excavation and earth work shall be measured and paid separately.
Supply and fixing for mild steel galvanised iron water tubing 50mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Laid in trenches complete, all as specified and directed.Note:- Excavation and earth work shall be measured and paid separately.
Excavating and cutting the existing hard standing to a width road n.exe 1.5 m and not exe 1.5 m in deep and marking good after laying GI pipe for encasing GI strips all as specified and directed.
Supply and fix renewal of integral LED aviation Obstruction light comprising of aluminium housing with polycarbonate enclosure along with programmable digital time switch and one MCB SP AC 240 VOLTS OF 06 Amps fixed in a wall bracket enclosures, all as specified and directed.
M&L and renewal of XLPE Insulated, PVC Sheathed, Armoured with Multi-stranded Aluminium Conductor Cable having Cross-sectional area 6 Sqmm, 2 Core, 1100 Volt grade, Heavy Duty, conforming to IS:7098 (Part-1), laid in Trenches/Ducts or Passing through Pipes or Fixing on Poles, walls etc., complete all as specified and as directed.
WELTRONENGINEERINGSERVICES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .