S.R. to Mamlatdar office, Kalavad (Pro. Conference room and Misc. work (Job No.JMN/SR/NR/2025-26/19).

Name of work :- S.R to Mamlatdar office, Kalavad (Pro. Conference room and Misc. work) Dist: Jamnagar

(Job No. JMN/SR/NR/2025-26/19)

BILL OF QUANTITIES

(A) Percentage Rate Tender

Item Description of Item (With brief Specification and reference in book of Quantity Unit Rate in Amount

No. Specifications) Figures

1 Dismentaling tiled of stone floors laid in mortar including stacking of 143.69 Sqm 50.27

serviceable materilas and disposal of unserviceable materials with all

2 Removing and scraping of old deteriorated plaster of any thickness 50.40 Sqm 20.36

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift

3 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 2.00 No 196.65

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift. Not exceeding

4 Dismantling santtary fittings like wash basin . W.C. pan Indian and 2.00 No 424.09

European type, flushing tank etc. including stacking the materials with

all lead and lift.

5 Providing 15mm thick cement plaster in single coat on Rough 50.40 Sqm 184.68

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in Cement mortar 1:3 (1-

6 Providing 20mm thick water proof cement plaster for sunk in single 12.97 Sqm 338.35

coat on brick concrete wall for interior plastering upto floor two level

finished even and smooth (ii) Cement Mortar 1:3 (1-Cement:3-sand)

and mixing water proofing materials of approved brand and

manufacture in cement mortar in proportion recommended by the

manufacturer for all floors.

7 Providing and Laying Water Proofing Treatment of Elastomeric Liquid 9.25 Sqm 636.30

applied Membrane Hydro Shield PUD Plus or Equivalent which

Product have Solid Content 69% or Above and Density 1.30 Gram/ML

or Above as per instruction of Engineer-in-Charge. All the works shall

be caaried out as directed by Engineer-in-Charge. 1. Surface

Preparation Cleaning of existing surface from all dust and debris by

applying blower, washing the surface by jet spray, grinding the surface

in proper slope and level to remove all unnecessary materials.

Loose friable material and weak concrete must be completely removed

and surface defects such as blowholes and voids must be fully

exposed. 3. repairing of the subtrate Filling of joints, blowholes, voids

and surface levelling must be carried out using appropriate products

like Polymer Paste 4. Primer Coat: Application of Primer Coat consists

of elastomeric liquid Hydro Shield PU or Equivalentapplied 50%

Dilution with Water. 5. First Cout: Hydro Shield PUD Plus application

or Equivalent is applied over a prime coat. Guarantee Period Min

Years with Bond [Coverage Average 1.00 Kg/Sqmt of Mixed Material

in 2 Coats Total Thickness 600 Micron (Primer Coat+2 Undiluted

Coats), Tensile Strengh 1.5 N/mm2 or Above, Chemical Base

Polyurathane Modified Acrylic Dispersion, Elongation Free Film 350%

8 Providing and laying cement concrete flooring 1:2:4(cement : 2-coarse 9.25 Sqm 347.14

sand : 4-graded stone aggregate 20mmnominal size) laid in one layer

andfinishedwith a floatingcoatofneatcement. 50mm thick.

9 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) 96.00 Sqm 1511.68

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including dismantling

of existing flooring and jointed with color cement slurry including

finished with flush pointing & cleaning the surface etc. complete for

10 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps 18.50 Sqm 1091.96

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement

: 3-coarse sand ) finishing with flush pointing in white cement.

11 Providing and laying coloured glazed tiles of the size 300 mm x 200 38.44 Sqm 1523.66

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and

dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

12 Applying two coats of putty & two coats of primer of approved brand 102.58 Sqm 40.59

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

13 Wall painting (two coats) with plastic emulsion paint of approved brand 102.58 Sqm 86.37

and manufacture on undecorated wall surfaces to give an even shade

including thoroughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth

14 Wall painting (two coats) with plastic emulsion paint of approved brand 105.25 Sqm 92.03

and manufacture on undecorated Ceiling and sloping roofs surfaces to

give an even shade including thoroughly brushing the surface free

from mortar droppings and other foreign matter and sand papered

15 Providing and fixing coloured anodized aluminium section louvered 0.72 Sqm 3529.95

ventilator with frame size 63x38.10 mm & 1.80 mm thick ground glass

and coloured anodized aluminium louvers fixtures and hold fastening

16 Providing and fixing special type wash basin on counter top of size 1.00 No 8297.15

591x397x397 mm or as required on site of CERA or equivalent quality

including pillar tap, Stop cock etc. complete.

17 Providing and fixing wash down water closet (European type WC pan) 1.00 No 14598.54

Cera or equivalent quality with PVC seat cover inlet & outlet gasket, CI

chair brackets including concealed type flush cock of Jaquar or

equivalent quality with jet spray etc. complete.

18 Providing and fixing flat back Urinal of 430 x 260 x 350mm size white 1.00 No 1381.68

colour including necessary PVC waste pipe, PVC waste coupling &

50mm C.P. Brass Stop cock fitting all labour and materials.

19 Providing and fixing screw down stop tap of 15 mm dia 4.00 No 205.82

20 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 40.00 RMT 72.64

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

21 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 30.00 RMT 91.83

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

22 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 25.00 RMT 148.11

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

23 Providing and fixing PVC pipe of 6 Kg / F / Sq.M. Water pressure 30.00 RMT 338.35

polythene pipe of 90mm inside dia. high density complete including

fixing by clamps to wall including making good the wall ceiling and floor

24 Providing and fixing Gun metal check or Non return fullway wheel 3.00 No 186.82

valve 15mm dia.

25 Providing and fixing Gun metal check or Non return fullway wheel 3.00 No 420.63

valve 25mm dia.

26 Providing and fixing pillar tap, capstan head, screw down high 5.00 No 308.72

pressure with screws, shanks and back nuts. 15mm dia.

27 Providing and fixing C.P. brass towel rail comlete with C.P.brass 2.00 No 616.42

brackets fixed to wooden plugs with C.P. brassscews. 600mm x 20mm

28 Providing and fixing PVC pipe of 6 Kg / F / Sq.M. Water pressure 30.00 Rmt 338.35

polythene pipe of 110mm inside dia. high density complete including

fixing by clamps to wall including making food the wall ceiling and floor

29 Providing and fixing 5mm thick glass mirror machine cut belveled edge 1.00 Sqm 2544.19

mounted on wall with special type wall touch SS mirror bracket fixing

with necessary plugs.

30 Painting two coat (excluding priming coat) on previously painted steel 15.75 Sqm 117.55

and other metal surface with enamel paint brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

matter. for every subsequent coat of paint

31 Painting two coat (including priming coat) on previously painted wood 4.00 Sqm 162.03

and wood based surface with enamel paint to give an even shade

including cleaning of all dirt, dut and other foreign matter.

32 Repairs to Damaged alluminium section Door window including 16.00 Sqm 707.00

replacing necessary spares, such as screw. nuts, bolts, handles,

hinges, rubber lining, packing sheets etc. and making the door window

fuctional & good looking, but excluding cost of glass, door closer

winding spring mosquitoes nets etc. cost of all tools, plants, labour etc

including) (C) Alluminium section window

33 Supply & Installing of ABC Type - 6 Kg, Capacity Fire Extinguisher 4.00 No 2461.37

as per IS -2171 ISI - mark , with necessary Fittings etc. complete.

34 Supply & Installing of Gas Co2 Type–4.5 Kg.. Capacity Fire 4.00 No 5923.65

Extinguisher as per IS And ISI - mark , with necessary Fittings etc.

35 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular 96.00 Sqm 1674.14

edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light

weight calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m

KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value

of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per

sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required

length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 00mm and size 24x28mm made of 0.30 mm

thick (Minimum) sheet to be interlocked at middle of the 200X600mm panel to form grid of size

600X600mm resting on eriphery walls/partitions on a perimeter wall angle pre-coated steel of

size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at

450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm

thick Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/ Cosmos/Spintone) in the grid including, cutting /making opening for services like

diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’

runners to be suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to

ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with

galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long

main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked

paint, for all heights, as per specifications, drawings and as directed by Engineerin-charge.

Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction

shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The

calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/

Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% noncombustible as per B.S.

476 part IV, 100% humidity resistance and also having thermal conductivity. 0.043° w/m

KC.for the best thermal Insulation

36 Providing and supplying HOF / Equivalent Make REVOLVING ZEBA-H 3.00 No 34845.00

premium Executive Revolving Chair (HIGH BACK) including aluminium

dia-casted base with knee tilt synchro mechanism with single position

back lock, seat and back, made from high density U-foam, arms, S.S.

pipe with PU nad etc comp

37 Providing and supplying Executive revolving HIGH BACK CHAIR of 2.00 No 11135.25

seat size 600 mm x 600 mm and back height 1200 mm from floor level

using special hi-density U foam and scientifically back position castor

fitted type good quality handles, high quality castor fitted metal powder

coated five prone made out of deep draw CRCA sheet stand and

along with good quality size and tilt adjustment by concealed spring as

design by Engineer-in-charge

38 Providing and supplying REVOLVING MEDIUM BACK CHAIR of seat 30.00 No 7423.50

size 525 mm x 525 mm and back height 900mm from floor level using

special hi-density U foam covering with good quality of velvet at seat

and back and Scientifically curved back position and PU type good

quality handles, hi-quality castor fitted metal powder coated, five prone

made out of deep drawn CRCA sheet stand and along with good

quality of powder coated steel structure frame of required size and

only back adjustment by spring as design approved by Engineer - in -

39 Providing and placing fixed based VISITOR CHAIR of seat size 450 30.00 No 3817.80

mm x 450 mm and back height 450 mm from seat using 32mm/16G

powder coated steel CRC pipe structure of approved shape using high

density U foam covering good quality of tapestry cloth on seat back as

design approved by Engineer-in-charge.

40 Providing supplying and laying Wall Panelling with 12 mm thick marine 24.80 Sqm 8432.49

water proof plywood with 1 mm premium lamination sheet require all

labour, material and fixture etc. work completed as per instruction of

engineer in charge

41 Providing and supplying and fixing U shape conference TABLE 600 25.00 RMT 7423.50

mm width table top made of 25 mm thick Plywood Sheet wrapped in

1mm Thick Laminates on Top and bottom treated 0.8mm thick

balancing laminate. Legs and supports of 18mm thick Plywood

supports wrapped in 1mm thick laminate all around. This legs provided

at above 120mm to 130 mm c/c. The Table shall be Provided with

Foot Rest made from Plywood & Laminates. All the Works shall be

Carried out on Site as per Detail Drawing & Instruction from E.I.C..

42 Providing and fixing sign board on 4mm thick transparent acrylic sheet 1.05 Sqm 3484.50

and letter with sticker sheet including fixing with stud etc complete.

43 Providing, Supplying and Fixing in Position Zebra Dual Tone Roller 11.00 Sqm 2777.50

Blind as per instruction of Engineer-in-Charge. The Fabric shall be

Woven using either Polyester or Fibre Glass Materials. The selection

of Fabric Category i.e. Privacy / Black Out or Sheer Shade shall be

44 Providing and fixing I type cloth curtain of Cotton base Material of 5.10 Sqm 2060.40

premium quality using approved good quality non- transparent cotton

cloth material for curtain with ring patta and stitching with belt etc

complete as directed by Engineer-in-charge. These cloth curtain shall

be stitched with Astar of White Colour. The selection and approved by

this item shall be done by Engineer-in-charge. The Rate f this item

include SS Curtain Rod & SS Knob with Bracket etc complete as

directed by EIC

45 Providing and placing VVIP Teak wood OFFICE TABLE having height 4.00 Sqm. 24391.50

750MM special designed structure side and front 18 MM thick edge

post form laminated sheet of approved design and melamine polishing

including with three drawers one side and two drawer other side with

heavy duty powder coated sliding telescopic chamels of approved

quality and each drawers having locking devices of godrej M. P. Jock.

table as per requirement and shall be approved for Engineer in

46 Providing and placing MODULAR office TABLE having size 1500 (L) x 1.00 Nos. 15756.00

900 (1) 750 (H) mm special designed struchire having top 35mm thick

round edge post form laminated, side and front 25mm thick Plywood

Laminates sheet of approved design and colour including with THREE

drawers of heavy duty powder coated sliding telescopic channels of

approved quality and each drawers having locking devices of Godrej

M.P. lock TABLE as per requirement and shall get approved from

Engineer-in-charge.

47 Providing and placing MODULAR office TABLE having size 1200 (L) x 2.00 Nos. 9544.50

750 (B) x 750 (H) mm special designed structure having top 35mm

thick round edge post forts laminated, side and front 25mm thick

Plywood Laminates sheet of approved design and colour including

with THREE drawers of heavy duty powder coated sliding telescopic

channels of approved quality and each drawers having locking devices

of Godrej M.P. lock TABLE as per requirement and shall get approved

from Engineer-in-charge.

48 Providing and fixing Modular BOX type having CUPBOARD having 13.50 Sqm 9443.50

450mun depth with using 18mm thick Plywood. Laminates in outer

frame, shutter and shelves with both side laminated with Imm thick

decorative laminate sheet with necessary hardware materials like SS.

hinges, handles and other fixtures and Fastenines etc. complete or as

49 Providing and supplying M.S. open file RACKE of size 2.10 (L) x 0.90 10.00 Nos. 8484.00

(B) x 0,45 (L) with using M.S. 35 x 35 x3mm slotted angles and with

M.S. 21 gauge sheet in open shelves at an intervals of 45cm with

adjustable shelves and with one coat of primer and two coats of

enamel paint with necessary other fixture and fastening etc. complete

or as directed.

50 Providing and supplying of 12mm thick clear glass of table top and 8.00 Sqm 2615.90

with polishing edge as design by Engineer-in-charge.

51 Providing & fixing notice board having 9mm soft board as a core 1.00 Nos. 6098.38

material Imm laminate sheet as back material & surface of 1.0 mm felt

cloths, having profile of heavy alluminium fluted anodized profile 10 to

12 micron of 18mm to 25mm thick board 'C' channel & corner is made

up of molded virgin ABS grey colour hanging vertical & horizontal

hanging facility as per sletced colour & size including all necessary

fixture, fastners, fittings, labour, material, machinary etc. complete as

seletced and diretced by Engineer-in-charge. Approved Make:

alkosign/altop/signmark DELUX SERIES. Notice Board: cize 900 mm v

52 Providing and Arranging FOOT REST made up of high impact 5.00 Nos. 1032.22

polystyrene having over all size 450mm x 350mm with tilts of 0° to 20°

for angular movement and non slippary platform surface including all

materials and labour etc. complete as per drawing/ Photographs and

instruction of engineer-in-charge. EBCO MAKE: size 450mm x 350mm

53 Office Logo Work :- Providing and fixing standard Logo using virgin 1.00 Nos 42975.50

acrylic or other material like Colored HDF/cementsheet /SS plate with

CNC work complete as per engineer selection. letters as per detailed

drawings and fixed with approved adhesive with necessary fittings and

provision shall be made for conceal LED light as per detail drawing.

(logo size will be aproxsize :- 600mm x 600mm)

54 English/Gujarati letters :-Providing and Fixing in Position 150 mm high, 47.00 Nos 662.56

English letters made from 1.0 mm think stainless steel sheet as

directed by Engineer-in-charge with all necessary tools & plants etc.

55 Providing & Laying 4mm Thick Epoxy Groove in Tiles Flooring 328.00 Rmt 85.85

including Cleaning Groove, Filling Epoxy Material and Cleaning the

Finished Surface etc Complete as per Instruction of Engineer-in-

Charge. The Shade and Colour of Groove shall be Decided by E.I.C.

56 Providing erecting and fixing double coated ISI water tank of required 1000.00 Litre 3.94

capacity each with all necessary fittings and connection etc. complete

57 Providing and fixing FRP frame size 125x65 mm and 35mmthick FRP 3.15 Sqm. 2019.97

shutter with wood grain raised panneled design finish shutter having

extra reinforcement on sides & edges in Gel coat finish. The core of

the shutter & frame is to be filed up with injected polyurethane foam

done in situ along with embedded wooden pieces for stiffening & also

taking hinges& fixtures. The whole FRP frame & shutter is to be

waterproof weather proof, termite proof & resistance to mild acid/

alkali. Rates are to be inclusive of S.S hinges with fastener sleeve &

alluminium fixtures & fastenings

I/We am/are willing to carry out the work at _______________% above/below Percent

(Should be Written in Figures & Words) of the estimated rates mentioned above. Amount of my/our

Tender works out as under.

# Estimated Amount Put to Tender # Estimated amount put to Tender

Deduct __________ % below Add : _________ % Above

Deputy Executive Engineer Executive Engineer

Jamnagar (R&B) Sub-Division Jamnagar (R&B) Division

Jamnagar. Jamnagar.

1 The Contractor shall exhibit a board with detailed specification and details of work as per directed by the Engineer-in-

Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income Tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption /16/C Date : 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per

actual nix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

5 Testing of materials shall be as per statement attached for quantity control. with specification, the materials shall be tested

in GERI for testing charges shall be paid by Executive Engineer, and of amount put to tender after deduction the cost of

materials as per Schedule-'A' shall be recovered from contractor in Running bill as per G.R. of R&B Deptt. No. TNC/1085-4-

6 The Contractor shall be state even "NIL" precent of no reduction as offered.

7 One percent of Contract value. for this work shall be recovered from the contract payment as " Labour cess" in terms of the

Gujarat Government Gazette extra ordinary Dated 12-12-2004 implementation of building & other construction worker's

(Regulation of Employment and condition of service Act, 1996)

8 For R.C.C. Item where there is change of grade mix or charge as per actual mix design the difference of cement

consumption shall be deducted from rate of original item at the rate of star rate mentioned in the tender.

9 GST Will be paid extra as per Govt. Emendment.

Deputy Executive Engineer Executive Engineer

Jamnagar (R&B) Sub-Division Jamnagar (R&B) Division

Jamnagar. Jamnagar.