Supply, Installation, Testing and Commissioning of Fire Safety System at KSRTC Bus Terminal and Shopping Complex, Thodupuzha, Idukki

Amount

Fire Extinguishers

Supply & installation of CO2 Type fire extinguisher of 2 Kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent

Supply & installation of CO2 type fire extinguisher of 4.5 kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent

Supply and Fixing of Fire Extinguisher dry chemical powder (ABC) Stored pressure type 4.5 kg capacity as per IS:15683 with ISI mark and with initial charger and installation brackets.

Fire Alarm Armoured Cable

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete including laying in conduit as required.

Fire Alarm Panel

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 10 Zone Panel

Supply, Installation of Sealed Lead Acid Battery 12 V DC x 24 Ah battery

Detectors, Sounders, MCP

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required

Supply and fixing of Optical Photo /Electric Smoke detector with imported base on ceiling or roof as required by the site engineer in charge.

Supply and Installation of Manual Call Point break glass type red colour powder coated MS/ABS box fix on existing wall /frame,24/12 Volt DC operated push OFF/ON switching mechanism with inner, outer frame, operation label and necessary attachments.

Fire Hose, Cabinet, Branch Piping

Fire brigade Inlet connection fabricated from 100 mm dia MS Class C pipe comprising of 4 gun metal male threaded non return valve. 4 way inlet

Supply and Fixing of Double Hose Box (cabinet) to accommodate one piece of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pipe. The cabinet is made of MS/Fibre sheet with glass fronted hinged doors and lock.

Supply and Fixing of Branch Pipe- S.S 63 mm dia short size branch pipe with 20 mm dia bore nozzle , as per IS:903 with -ISI Marked

Supply and Fixing of Hose reels with swing type drum made of Miled Steel, Hose Reel Drum - as per IS:884 with 30 mtr length rubber hose of working pressure 7 kg/cm2 and shutt off nozzle rang of jet flow 24 ltr/min, range of jet throw 6 mtrs with ISI mark.

Suppy and fixing of Fire Fighting Hose , Fire Hose - 63 mm ( 2 1/2") dia , 15 mtrs length bearing IS;636 type A with ISI Marked duly bounded with S.S couplings, 63 mm size, pair of male & female parts, instantaneous type , heavy duty bearing IS:903 with ISI mark.

Pendent Type Sprinkler

Supply and Installation of Pendent type Sprinkler 15 mm , 1/2" BSPT end connection having temperature 68 degree C made out of forged brass and SS decorative finish with temperature sensing tube, pressure with standing minimum 8 kg/cm2 , UL listed.

Valves

Supply and Installation of Hydrant Valve- Single Headed, S.S -as per IS: 5290 , ISI Marked oblique pattern Hydrant Landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with pvc blank cap & chain .

Supply and Installation of following type strainer valve for safe pump operation. 80mm dia

Supply and Installation of following type strainer valve for safe pump operation. 150mm dia

Supply and Installation of alarm control valve consisting of 1 number alarm valve, 1 number main stop valve ,1 number water meter with alarm gong, pressure guage, drain valve and drain piping etc complete 150mm dia

Supply and Fixing of Air cushion vessel made of MS sheet 200 mm dia in 1 mtr height, with automatic air release cock, 25 mm drain valve and shut off with all necessary attachments.

Supply and fixing of Air release valve gun metal body of 25 mm dia

Supply and fixing of pressure guage, 4 " dial, 0 - 200 psi range 3/8" BSP weather proof with stainless steel internals, siphon tube including fittings etc.

Supply and fixing of pressure switch having 1/4" BSP (F) connection IP:32 enclosure protection, pressure range 0 to 200 psi with necessary contact

Supply and fixing of Ball Valve cast iron body as per IS 5312 with ISI mark.

Supply and fixing of Non Return Valve single plate wafer type swinch check valve, short pattern type with integral hinge pin disc, nitrile rubber O - ring seat and face sealing as per IS: 5312 with ISI mark. 80mm

Supply and fixing of Non Return Valve single plate wafer type swinch check valve, short pattern type with integral hinge pin disc, nitrile rubber O - ring seat and face sealing as per IS: 5312 with ISI mark. 150mm

Supply and fixing of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1, teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 50 mm

Supply and fixing of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1, teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 80 mm

Supply and fixing of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1, teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 100 mm

Supply and fixing of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1, teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 150 mm

M S Piping

Supply and fixing of M S Pipe Class ' B' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 25mm dia

Supply and fixing of M S Pipe Class ' B' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 32mm dia

Supply and fixing of M S Pipe Class ' B' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 40mm dia

Supply and fixing of M S Pipe Class ' B' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 50mm dia

Supply and fixing of M S Pipe Class ' B' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 65mm dia

Supply and fixing of M S Pipe Class ' B' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 80mm dia

Supply and fixing of M S Pipe Class ' B' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 100mm dia

Supply and fixing of M S Pipe Class ' B' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 150mm dia

Fire Pumps

Supply, Installation, Testing and Commissioning of Booster pump –900 LPM at 35m, 12.5 HP, Mono block pump set of std CI construction including necessary electrical terminations/connections. Make: Crompton/WEG/Grundfos/GE or equivalent

Supply, Installation, Testing and Commissioning of Jockey pump – 180 LPM at 60m, end suction back pull out pump fitted with CI Casing, Bronze impeller, carbon steel shaft, gland packed, discharging 180 LPM at 60mts, directly coupled to 5.5kW, 7.5 HP, 3000 RPM (Syn) TEFC IE2, IP55, Class F insulation, Squirrel cage induction motor confirming to IS12615:2018, with MS fabricated base frame, flexible jaw type coupling and coupling guard, supplied as a set, including necessary electrical terminations/connections. Make : WEG/ Grundfos/GE or equivalent

Supply, Installation, Testing and Commissioning of Centrifugal pump of 1620 LPM, 55M head, 56HP, 2500RPM,12V starting, radiator - cooled type, water-cooled Diesel Engine coupled, end suction, back pull out type pump fitted with CI Casing, Bronze impeller, carbon steel shaft, gland packed, discharging1620LPM at 55mts with standard 12V instrument panel, mounted on a common MS fabricated base frame, holset coupling and coupling guard, supplied as a set. The standard scope of supply does not include battery, battery leads, fuel tank, avm pads,initial oil, coolant and fuel filling, including necessary electrical terminations/connections.

Supply, Installation, Testing and Commissioning of Electrical Main pump of 1620 LPM, 55M head, end suction back pull out pump fitted with CI Casing, Bronze impeller, carbon steel shaft, gland packed, discharging 1620 LPM at 45 mts, directly coupled to 30kW, 40HP, 3000 RPM (Syn) TEFC IE2, IP55, Class F insulation, Squirrel cage induction motor confirming to IS12615:2018, with MS fabricated base frame, flexible jaw type coupling and coupling guard, supplied as a set including necessary electrical terminations/connections. Make: Grundfos/Kirloskar/WEG/GE or equivalent

Motor Control Centre (MCC Panel)

Conduit

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

Priming Tank

Supply and fixing priming arrangement tank consisting of priming tank of capacity 900 liters fabricated our of 3 mm thick MS sheet, graduated water level indicator, high and low level switches, on a masonry pedestal with water in and out connections, drain and overflow connections, supplying and laying suitable size MS pipes for priming lines to main pump, DG pump and jockey pump from the priming tank as per requirements including supplying and fixing of suitable size sluice valves, non-return valves, float valve assembly etc as per functional requirements as required

Air Vessel

Supply and fixing of Air vessel of 250mm dia and 1.2m height made of sheet steel along with air release valve, pressure gauge, shut off valve, drain arrangement with required accessories, necessary angle iron brackets for fixing on roof, painting with synthetic enamel paint of approved shade etc and as per specification as required.

Cabling and Termnation

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 3.5 core 120 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil). 3.5 core 50 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil). 3.5 core 70 sq mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 1/2 X 50 sq. mm (35mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 1/2X 70 sq. mm (38mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 1/2 X 120 sq. mm (45mm)

Drawings and Approvals

Preparation of Drawings and attaching the same on wall in neatly framed in 5mm thick glass (approximate 1.5 sqm)

Liasoning and Obtaining necessary Approvals and NOC, submit to Panchayath/ Municipality/ KSEB/ Electrical Inspectorate/ Kerala Water Authority/State Pollution Control board/ Fire Department/ Factories and Boilers and other agencies if any for getting approval and sanction. (All statutory fees shall be borne by Client - Actual amount shall be paid after submission of bill)

USHA FIRE TECH