Loading…
Loading…
Tender Value
₹50.0 L
EMD Value
₹50,010
Closing Date
15 Oct 2026, 6:00 pm
CHIEF OFFICER BORSAD NAGARPALIKA
1. Work regarding the procurement of LED streetlights and bracket pipes for the Borsad Municipalitys streetlight department. 2. Providing, Supplying and Erecting Street Light Pole with LED Lights From New Nagarpalika Building To Bus Station Road at Borsad . 3. Construction Of New Box Drain Opposite Merkantile Bank At Borsad. 4. Construction oF Retaining Wall and Paver Block From New Gate Towards Bus Station At Borsad.
351362
1 of 2026-27
Open
Civil - All
Works
Anand
2 documents required · 2 mandatory
₹2,832
The Chief Officer, Borsad Municipality, Borsad
₹50,010
1 Oct 2026
1 Oct 2026
1 Oct 2026
15 Oct 2026
1 Oct 2026
Name Of Work :-
2 Providing, Supplying & Erecting Street Light Pole with LED Lights From New Nagarpalika Building To Bus Station
Road at Borsad .
3 Construction Of New Box Drain Opposite Merkantile Bank At Borsad.
4 Construction oF Retaining Wall & Paver Block From New Gate Towards Bus Station At Borsad.
1 Providing and erecting Street Light pole bracket comprising
main B Class GI pipe of 4.2 cm/require outside dia. complete
with suitable B Class G.I. sleeve tubing of approx.
45cms.length and suitable for 76.5 mm /80mm / required
size of pole top having sufficient fasteners for fixing the
brackets and having spread of 1.5.mtr. length with
deg.with vertical plane & suitable welded stays, reducer and
with check nuts complete painted with one coat of Red
oxide / PU base primer and two coats of Aluminium / PU
paint. paint with following nos of arms.
[A] Single Arm Bracket 1.5 Mtr 90.00 683.77 NO.
2 Supplying and erecting LED street light / Flood light fittings
with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast aluminium
housing with smooth finish powder coated and heat sink
extruded aluminium with diffuser and Polycarbonate optics/
lenses with company mark/name engraved or embossed
160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT
3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>
100 lumens/watt . LED driver efficiency > 85 %.( fittings
required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV integral and
,Light must have 440VAC line supply with over-voltage
3 Supplying and erecting LED street light / Flood light fittings
with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast aluminum housing
with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved
or embossed 160 to 270 V,Power Factor more than 0.95,
THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,
Luminaire efficacy> 100 lumens/watt . LED driver efficiency
> 85 %.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown ranges of
Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV integral and
,Light must have 440VAC line supply with over-voltage
(i) above 36 to 48 watts 20.00 3345.12 NO.
(iii) above 60 to 90 Watts Cat III 20.00 5976.17 NO.
2 Providing, Supplying & Erecting Street Light Pole with LED Lights From New Nagarpalika Building To Bus Station
Road at Borsad .
No Description Quantity Total Rate Per Amount
1 Providing decorative Single arm street light with 7.5mtr
Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II)
1980 and bracket with 1500mm width and 750mm total
height with suitable insertion pipe diameter as per attached
drawing with vertical plane & suitable welded stays, reducer
and with check nuts complete painted with one coat of Red
oxide / PU base primer and two coats of Aluminium / PU
paint. paint with following nos of arms. including M.S. Base
plate 300 X 300 X 16 mm for pole, Suitable for mounting on
surface of foundation with GI foundation bolts,with pole
required stiffeners welded also Including LED IP-65 Light
CCT-5000k Driver Efficiency - 85% Fitting As Per Approved
Bracket Design by Nagar Palika.
Supplying & erecting approved make SMC press moulded
composite FRP. loop-in, loop-out approx. 2mm thick box
complete with Bakelite connector strip 5way(3P+N+E),DIN
rail for mounting mob & hinged doors as per requirement
having locking arrangements with mounting clamp with
nuts, bolts & washers suitable for erection on pole with
cable clamps& earth bolt of following size of box.
(B) 250mm x 200mm x 100mm [deep] 39.00 515.10 Nos.
4 Supplying and erecting Flexible PVC insulated multistrand
multicore 1.1 kv grade ISI marked copper wires of following
size to be erected as directed.
e) 1.50 Sq.mm 3 core round PVC sheathed 858.00 31.31 Rmt.
5 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured
cable multistrand Aluminium conductor for 1.1 KV. to be
laid on wall with necessary clamps or in existing trench /
pipe of following size of cables
(A) 4 core 16 Sq. mm 853.22 153.52 Rmt.
6 Supplying and erecting B class Galvanized iron pipe having
smooth finished bore of the pipe on both ends erected nuts
and bolts along the pole / wall shaping the pipe as per site
requirement. Pipe dia as following.
7 Providing and erecting Pipe type earthing having
cms.long and 2.5 cms. dia. galvanised iron pipe with
coupling and buch buried in specially prepared earth pit
complete with necessary 8 SWG earth wire. 39.00 368.65 Nos.
8 For using salt and charcoal / coke as required for pipe type
earthing. 39.00 171.70 Nos.
9 Supplying & erecting earth pit of minimum bore dia.150mm
size approved make Earthing Electrode consisting Pipe-in-
Pipe Technology as per IS 3043-1987 made of corrosion free
hot dipped G.I.Pipes having Outer pipe dia of 50mm having
80-200 Micron galvanising, Inner pipe dia of 25 mm having
200-250 Micron galvanising, connection terminal dia of
12mm with constant ohmic value surrounded by highly
conductive compound with high charge dissipation suitable
for following type of applications with chamber and heavy
duty cover. (A)(approved make OEM has to submit test
certificate including value of earth resistance of installation
duly stamped and signed by agency and officer Incharge has
to ensure the value of earthing resistane mentioned in test
Certificate) & having back filling compound of (B) Inner
chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter
testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no
load & dry form, Sulphar content:- <2%(C) Back fill
Compound :- Earthing compound should be capable to
retain moisture for long time Necessary test report must be
submitted by Agency.
(a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg. 2.00 4591.46 Nos.
10 Making trench in Hard Murrum / Tar Road of suitable width
of 90 cms or required depth for laying any size of cable or
locating the fault all over the run and back filling the same
and making the surface as normal ground.
11 Making trench in Hard Murrum / Tar Road of suitable width
of 90 cm or required depth for laying any size of cable or
locating the fault all over the run and back filling the same
and making the surface as normal ground. (B) If additional
machinery like hammer driller or JCB use [Add]
12 Providing & laying approved make Double walled
corrugated pipes (DWC) of polyethylene(conforming to IS
14930 II )with necessary connecting accessories of same
material at required depth for laying of cable. below
ground / road surface for enclosing cable and back filling
the same to make ground as per original.
13 Providing and fixing Terminal board of size 5.0 x 127 x
mm.bakelite sheet with suitable brass studs with nuts,
washers and clamps of size 25mm x 3mm suitable for pole
painted with one coat of red lead paint. 39.00 146.45 Nos.
14 Providing 1:2:4 cement concrete foundation & 70 % PCC
from bottom including excavation for the pole of size 60 x
60 x 120 cm. Deep in below ground level with plinth of
cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level
with necessary curing and finishing in approved manner. (
15 Providing and, fixing heavy duty flange type brass cable
gland with rubber ring for PVC insulated armoured cable
complete with out going tails, insulating tape etc for
following size of cables.
(B) 2 to 4 core 6 Sq. mm 156.00 38.38 Nos.
(D) 2 to 4 core 16 Sq. mm 78.00 47.47 Nos.
Solderless crimping type Aluminium lugs conforming to IS
suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner.
Supplying & erecting IP 55 grade following size section pillar
fabricated from joint less M.S. Sheet with angle iron legs
made from jointless M.S. Angle with cable clamps to be
buried in ground to have appropriate erection to work
uniform until erected with cement concrete foundation and
45 cm high bricks work finishing with plaster etc. hinged
double door internally supported on both side, with internal
and outside looking arrangement with look and keys in
duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is
welded and other with nut and bolt for erecting Bakelite
sheet. Painting the Section Pillar inside and out side with
three tank powder coated paint. section pillar roof should
be without joint with water leakage proof & tested as per IP
55 test & followed by IS 2147 of 1962 2.00 1884.66 Nos.
(C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge
MS Sheet with angle iron legs 45 cm long made from 35 X
X 5 mm thick MS angle.
18 Supplying and erecting HYLAM sheet on existing angle iron
frame.for following thickness (F) 12mm 1.00 2311.89 Smt.
Supplying & erecting approved make Digital time switch
having lithium cell 6 years operative and operate battery
backup 1 channel day clock with 14 memory programme,
suitable to operate on 240V + 5%, 16A with, floating
contacts Minimum switching setup time 1 minimum & LCD
display. Also comprised permanent ON/OFF switching.
Programming switches & housed in fire proof thermoplastic
enclosure & transparent cover erected as required with
necessary connection erected as directed. 2.00 3168.37 Nos.
20 Supplying and erecting Ammeter / Voltmeter selector
switch for 3 phase AC Supply 500 V on existing panel board
with necessary connections. 2.00 317.14 Nos.
21 Supplying and erecting approved make panel mounting type
Digital Ammeter having 3 digits LED display, external CT
operated, calibrated for 0 to 1000 Amps suitable to operate
on 500 Volt AC , erected on existing panel board with all
connection, wiring etc .with manufacturers calibration
certificate. 2.00 1558.43 Nos.
22 Supplying and erecting approved make panel mounting type
Digital Voltmeter having 3 digits LED display, 0 to 750 AC
Volts range erected on existing panel board with all
connection, wiring etc .with manufacturers calibration
certificate. 2.00 1275.63 Nos.
23 Supplying and erecting approved make suitable panel
indicator LED type lamp, lens cover, complete erected with
necessary connections. 2.00 43.43 Nos.
24 Providing & erecting L.T. Current Transformer with bar
primary 50/5 to 1000/5 ratio 15 VA burden erected in
existing CRCA box duly secured with insulating materials
connected to the meter 2.00 274.72 Nos.
25 Providing and erecting Approved make Four pole moulded
case circuit breaker having breaking capacity ICU of 25 KA.
at 415 V,having normal current rating up to 25 A to 100A.
with Fixed thermal & magnetic release suitable to work on
A.C. supply 50 c/s. with all internal connections, spreader
tinned copper & complete erected in existing 16 G.M.S.
ICS=100% of ICU only Cat III 2.00 6173.12 Nos.
26 providing and erecting Miniature circuit breaker single pole
0.5A to 2A system and having breaking capacity 10 KA to be
erected in existing box. confirming to IS 8828/1996 with ISI
Mark Cat.III 39.00 270.68 Nos.
Providing & erecting 415V MCB Four Pole Switch for
Lighting Load (B curve) having 10KA breaking capacity &
confirms to IS :8828 in existing box having following capacity
(A) 6 to 32 Amp. Cat.III
3 Construction Of New Box Drain Opposite Merkantile Bank At Borsad.
Clearing and grubbing road land including uprooting rank
vegetation grass bushes, shrubs, sapling and trees girth up to
1 mm removal of stumps of trees cut earlier and disposal of
unserviceable materials (B) By manual in area of thorny jungle
0.01 112341.88 Hectare
Excavation for foundation upto 1.5 m depth including sorting out
and stacking of useful materials and disposing off the excavated
stuff upto 50 Meter lead.(C) Hard Murrum
Excavation for foundation upto 1.5 m depth including sorting out
and stacking of useful materials and disposing off the excavated
stuff upto 50 Meter lead.(D) Soft rock not requiring Blasting
Excavation for foundation for depth from 1.5 m to 3.0 m
including sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(E) Hard
Rock 96.26 651.26 Cumt
Demolition of Brick work and stone masonry including stacking of
serviceable materilas and disposal of unserviceable materials
with all lead and lift. (i) In Lime Mortar.
Providing and Constructing cofferdam in river basin including
excavation, filling, middle portion with B.C. soil (in empty
Cement/gunney Bags) to the entire satisfaction of EIC till
completion of the work including dismanteling coffer dam
after completion of the work as directed by EIC. Bags Filled with
Local selected Soil (upto 0.5 Km) 563.00 8.08 BAGS
Filling available excavated earth excluding rock in trenches plinth
sides of foundation etc. in layers not exceeding 20 cm in depth
consolidating each deposited layers by ramming and watering.
Carting of surplus earth (A) Lime , murrum, building rubbish,
8 earth, manure or sludge & execavated rock and rubbish, (2) Earth
2 (KM Lead) 96.26 62.48 Cumt
Providing and filling rubbles including hand packing and filling
9 interstices with quarry spalls behind abutments and between
returns as directed. 19.25 1094.11 Cumt
Providing and laying cement concrete 1:3:6 (1-Cement :3- coarse
sand : 6- hand broken stone aggregates 40 mm nominal size) and
curing complete excluding cost of formwork in (A) Foundation
and Plinth 9.63 3270.38 Cumt
Providing and laying controlled cement concrete M.250 and
curing complete including the cost of formwork and excluding
11 the cost reinforcement for reinforced concrete work in (A)
Foundations, footings, Base of columns and Mass concrete.
Providing and laying controlled cement concrete M.250 and
curing complete including the cost of formwork and excluding
12 the cost reinforcement for reinforced concrete work in(B) Walls,
from top of foundation level upto floor two level
Providing and laying controlled cement concrete M.250 and
curing complete including the cost of formwork and excluding
13 the cost reinforcement for reinforced concrete work in (C) Slabs,
landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever
upto floor two level. 20.01 5440.87 Cumt
Providing 15mm thick cement plaster in single coat on Rough
(Similar)side of single or half brick walls for interior plastering
upto floor two level and finished even and smooth in (i) Cement
mortar 1:3 (1-cement:3-sand) 148.18 203.78 Cu.mtr
Providing TMT Bar FE 500D reinforcement for R.C.C. work
15 including bending, binding and placing in position complete upto
floor two level 6697.43 77.29 Kg
Dewatering by pumping set of required capacity including
temporary platform carting pumping set at site and fixing the
same in position including all accessories and fuel and labour etc.
complete. 8400.00 18.50 Hp-Hr.
4 Construction oF Retaining Wall & Paver Block From New Gate Towards Bus Station At Borsad.
Excavation for foundation upto 1.5 m depth including sorting out
and stacking of useful materials and disposing off the excavated
stuff upto 50 Meter lead.(C) Hard Murrum
Box cutting the road surface to proper slope and camber for
making a base for road work including removing the excavated
stuff and depositing on the road side slope as directed upto
50Mt.lead. 67.69 Cu.Mtr. 109.41
Filling available excavated earth excluding rock in trenches plinth
sides of foundation etc. in layers not exceeding 20 cm in depth
consolidating each deposited layers by ramming and watering.
Filling in foundation and plinth with murrum or selected soil in
4 layers of 20cm. thickness including watering, ramming and
consolidating etc. complete. 259.20 Cumt 294.38
Carting of surplus earth (A) Lime , murrum, building rubbish,
5 earth, manure or sludge & execavated rock and rubbish, (2) Earth
2 (KM Lead) 136.12 Cumt 62.48
Providing and laying cement concrete 1:3:6 (1-Cement :3- coarse
sand : 6- hand broken stone aggregates 40 mm nominal size) and
curing complete excluding cost of formwork in (A) Foundation
and Plinth 44.91 Cumt 3270.38
Providing and laying controlled cement concrete M.250 and
curing complete including the cost of formwork and excluding
7 the cost reinforcement for reinforced concrete work in (A)
Foundations, footings, Base of columns and Mass concrete.
Providing TMT Bar FE 500D reinforcement for R.C.C. work
8 including bending, binding and placing in position complete upto
floor two level 5981.63 Kg 77.29
Providing and fixing pre-cast Rubber Dye inter locking concrete
block 60mm thick with grade of concrete M300 pnumatic
compressed / Vibrated mechanically and as per approved design
9 confirming IS 15658 : 2006 including 35mm Sand layer for
levelling and filling the joint with sand in proper line and level as
per guidelines of IRC SP 63-2018 etc complete.
Providing cement vata (10cm. x 10 cm. size) quarter round in
10 cement mortar 1:1 including neat cement finishing, watering etc.
complete. 211.40 Rmt 24.28
Add 3 % Cont. & Superv. :
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
05. General Notes conditions.pdf
02. SBD.pdf
01. Invitation.pdf
Schedule B.pdf
Civil Work Specification.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .