M/o Building (Maintenance of Community Center Repairing Painting, Sanitary and Etc Work in Sector-40) Noida.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undercorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all materials labour Tools & plants etc required for proper completion of the work.SOR I.NO. 15.09 649

Painting with synthetic enamel paint of approved brand and manufacture of required to colour to give an even shade. Two or more coat on new work. (DSR 2018 I.No. 13.61.1/P-227)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 13/I.No. 9.21.1/P-

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) 25 mm thick.

279 Cement Concrete with 4 cm gauage approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & Plants etc. required for proper completion of work.

P/F uplasticsed PVC connection pipe with brass unions : 45cm length 15mm nominal bore. DSR I.No:18.21.2.1

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore. DSR 18/I.No. 18.49.1/P-300

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR/I. no. 18.48

P/F Ball Valve (Brass) High or Low Pressure, with plastic floats complete:20mm Nominal bore Item No. 18.18.2