Repair Maint Replacement of unserviceable light fittings wiring earthings and allied works in certain bldgs in Zone 3 at ND V

Amount

M&L for taking down existing point wiring including fittings & fixtures and carrying out surface point wiring in medium grade, ISI marked PVC conduit of required size with 2 x 1.5 Sqmm size multi stranded PVC insulated FRLSH copper conductor cable and 1 x1.5 Sqmm size multi stranded PVC insulated green colour FRLSH copper conductor cable as earth continuity conductor including clamps, screws gutter / plug et., with and including 2 mm thick sheet metal terminal board fixed flush to wall and 3mm thick bakelite sheet top complete all as specified and as directed for one light / fan / bell point etc., controlled by one 5Amps switch one way.

All as per item No. 1 above but for one 5 amps socket point on independent board all as specified and directed.

All as per item No.1 above but for one two way light point controlled by two, two way switch complete all as specified and as directed.

All as per item No. 1 above but for one 15 Amps socket point independent with 4.0 sqmm cable phase and nutral and 4.0 sqmm cable as earth cable complete all as specified and as directed.

M&L for surface wiring with 2 runs of 2.5 sqmm FRLSH grade PVC insulated single core unsheathed 1100 vlots grade multistranded copper conductor wire single core multistrand for phase and neutral, one run of 2.5 sqmm FRLSH grade PVC insulated copper conductor wire for each continuity drawn in and including non metallic ISI marked PVC conduit 20 mm dia (heavy grade) with conduit acessories as per IS 3419-1976 complete all as specified and as directed. [Note :- (i) 2 runs of cable, 1 run of earth wire and 1 run of conduit together will be measured as 1 unit length. (ii) Working hight at roof level of workshop bldgs]

All as per item No. 5 above but cable of size 2 x 4.0 sqmm and earth wire 1 x 4.0 sqmm complete all as specified and as directed.

All as per item No. 5 above but cable of size 2 x 6.0 sqmm and earth wire 1 x 6.0 sqmm complete all as specified and as directed.

All as per item No. 5 above but cable of size 2 x 10.0 sqmm and earth wire 1x 10.0 sqmm complete all as specified and as directed.

All as per item No.5 above but cable of size 4 x 10.0 sqmm and earth wire 2 x 10.0 sqmm complete all as specified and as directed.

S&F 5 Amp switch piano flush type single pole one way including taking down unserviceable one complete all as specified and as directed

S&F 5 Amp switch piano flush type single pole two way including taking down unserviceabe one complete all as specified and as directed

S&F 15 Amp switch piano, flush type single pole one way including taking down unserviceable one complete all as specified and as directed

S&F bell push piano type one way 5Amp, 240 volt including taking down unserviceable one complete all as specified and as directed

S&F socket flush type 5 amps, 5 pin, 230 volt including taking down unservieable one complete all as specified and as directed

S&F socket flush type 15 amps, 6 pin, 230 volt including taking down unserviceable one complete all as specified and as directed

S&F switch socket combination 5 pin 5 amps, 230 volt including taking down unserviceable one complete all as specified and as directed

S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 15 amps and 3 pin 5 amps, 230 volt including taking down unserviceable one complete all as specified and as directed

S&F ceiling rose surface Bakelite three terminal including taking down unserviceable one complete all as specified and as directed.

S&F bell electric AC 240 volt, 50 HZ. Including taking down unserviceable one complete all as specified and as directed.

S&F flush type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 Hz including taking down unserviceable one complete all as specified and as directed.

S&F Hylam Sheet 3mm thick on existing concealled MS/CI ractangular or Squar or round box with 04 Nos cadmium coated screws and cup washer including cutting slots for mounting switch/socket/fan regulator/ batten holder etc., including taking down unserviceable one complete all as specified and as directed.

S&F PVC rectangular switch board of size 175mmx 100mm x 50mm including necessary cutting slots for mounting switch sockets etc., including taking down unserviceable one complete all as specified and directed. MAKE- Presto Teak/Press Fit/Plaza.

S&F PVC rectangular switch board of size 200mm x 150mm x 50mm including necessary cutting slots for mounting switch sockets etc., including taking down unserviceable one complete all as specified and as directed. MAKE- Presto Teak/Press Fit/Plaza.

S&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, "C” curve including taking down unserviceable one complete all as specified and as directed. MAKE- Legrand, Cat Part No- 4085-87 to 4085-95 / Schneider/ABB.

S&F MCB, Double Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘C' curve including taking down unserviceable one complete all as specified and as directed. MAKE- Legrand, Cat Part No- 4085-96 to 4085-98 / Schneider/ABB.

S&F RCBO, 2 pole, rated current 16 amps, Sensitivity 300 MA, 240 Volts including taking down unserviceable one complete all as specified and as directed. MAKE- Cat Part No- 4113-99 of Legrand / Schneider/ABB

S&F MCB, Four Pole, 40 to 63 amps, 415 Volts including taking down unserviceable one complete all as specified and directed. MAKE- Cat Part No- 4087-92 to 4087-94 of Legrand / Schneider/ABB

S&F Sheet metal enclosure two way, IP-30 including taking down unserviceable one complete all as specified and as directed. MAKE- Cat Part No- 5077-91 of Legrand / Schneider/ABB.

S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 8 way including g taking down unserviceable one complete all as specified and as directed. MAKE- Cat Part No- 5076-11 of Legrand / Schneider/ABB

S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way including taking down unserviceable one complete all as specified and as directed. MAKE- Cat Part No- 5076-70 of Legrand /Schneider/ABB

S&F Vertical MCB distribution board, including 4 pole MCCB, 16 KA, 100 Amps, incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way including taking down unserviceable one complete all as specified and as directed. MAKE- Cat Part No- 6079-13 of Legrand / Schneider/ABB

S&F Metal plug and socket board with MCB SP 20 amp, 16 KA including taking down unserviceable one complete all as specified and as directed. MAKE- Cat Part No- 5078-11 of Legrand / Schneider/ABB

S&F LED tube light fitting with LED tube, 2 feet long, 10 watt, CDL, 230 Volts , complete with all accssories internally pre wired including taking down unserviceable one any type complete all as specified and as directed. Make-Bajaj, Cat Part No-BCLSB 10 NW / Havells/Philips/wipro

Fixing only LED Tube light fitting, 18 watt, CDL, 230 Volts, 4 feet long, complete with all accssories internally pre wired including taking down unserviceable one any type complete all as specified and as directed. Note : LED fitting will be issued under Sch B free for fixing

Fixing only Square shaped recess mounted LED slim panel down lighter, 18 watt (1`x 1`), to POP / grid celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable including taking down unserviceable FTL/CFL fiitings any type complete all as specified and as directed. Note : LED fitting will be issued under Sch B free for fixing

Fixing only Square shaped recess mounted LED slim panel down lighter, 36 watt (2` x 2`), to POP/grid celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable including taking down unserviceable FTL/CFL fiitings any type complete all as specified and as directed. Note : LED fitting will be issued under Sch B free for fixing

Fixing only retro LED tube 20 watt to new / existing single / twin box type industrial fitting with addition / alteration to existing wiring for retro LED connection including taking down unserviceable one any type all as specified and directed. Note : Retro LED tube will be issued under Sch B free for fixing

Fixing only LED high bay light 200 watt at roof truss level of workshop buildings and other places including taking down unserviceable one any type complete all as specified and as directed. Note : LED down lighter 200 watt will be issued under Sch B free for fixing

Supply and fix industrial box type LED Batten with CRCA body, pre coated with white and prewired suitable for LED tube 1 x 18/20 watt 4' long complete all as specified and as directed. Make-Bajaj, Cat Part No-BLRB-DB 118 / Philips/ Wipro/ Havells/GE / Surya Roshini

Supply and fix industrial box type LED Batten with CRCA body, pre coated with white and prewired suitable for LED tube 2 x 18/20 watt 4 feet long including dismantling taking down unserviceable one any type complete all as specified and as directed. Make-Bajaj, Cat Part No-BLRB-DB-218 / Philips/ Wipro / Havells /GE / Surya Roshini

S&F Surface mounting round LED down lighter with dome shape opal diffuser 18 watt (white) including taking down unserviceable one any type complete all as specified and as directed. Make- Bajaj, cat No-TARA LED -BGCML 18W WH / Philips/ Wipro / Havells /GE / Surya Roshini

Supply only ISI marked 3 core x 0.5 sqmm copper flexible PVC insulated cable and overall PVC sheathed complete all as specified and as directed.

S&F LED building security light 45 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener including taking down unserviceable fitting any type complete all as specified and as directed. Make-Bajaj, Cat Part No BRTFG 45W LED / Philips/ Wipro / Havells /GE / Surya Roshini

S&F GI pipe street light bracket of 40mm bore light grade pipe approx length 1.5M, bent to shape, including fixing to wall with 2 Nos. flat iron clamps of size 40 x 6mm complete with nut bolt washers including taking down unserviceable one any type complete all as specified and as directed.

M & L for Earthing complete with Cast iron pipe electrode, 100 mm bore, Class LA, 2.5 mtr long buried directly and vertically in ground with top edge at ground level after making manual bore hole of size not less than 400 mm dia and 2.5 Mtr long near the specified bldg, connected with galvanised steel strip earthing lead of size 32mmx 6mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with RCC precast pit cover slab 80mm thick with handle for lifting made out of 8mm dia MS rod, wiremesh, charcoal and salt in alternate 150mm thick layers around CI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion after dismantling taking out unserviceable one complete all as specified and as directed. Note : Earth test result shall be submitted to dept.

S&F Aluminium strip 25 x 3.15 mm with epoxy insulator saddle type 40mm high fixed at 50cm interval, saddles and fixing screws etc., for down conductors above ground including taking down unserviceable strip complete all as specified and as directed.

S&F GI strip 32 x 6mm including taking down unserviceable one complete all as specified and as directed.

SRI THULASI TECH

SREE DURGA INFOTECH

KANAKAJYOTHI ENTERPRISES

ANAND ENTERPRISES

ESWAR ENTERPRISES

RAJASHEKHAR ENTERPRISES