CA NO.CWE BLY/GE (W) /2PROVN OF STORE ROOM ALONGWITH GENTS AND LADIES TOILET NEAR BLDG NO P-112, WOODEN FLOORING, WALL PANELLING AND FALSE CEILING IN BLDG NO P-112 AND EXTERNAL CABLING WORK WITH CONNECTED WORK AT P-56 BUNGLOW UNDER GE (WEST) BAREILLY

Amount

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 m in depth, getting out in soft/loose soil etc, including trimming bottom and sides of trenches, leveling/grading and ramming bottom of excavation complete all as specified and directed

Excavation in over area not exceeding 1.5 m in depth, getting out in soft/loose soil etc., including trimming bottom and sides of trenches, leveling/grading and ramming bottom of excavation complete all as specified and directed

Excavation in over area beyond 1.5 m or part thereof in depth, getting out in soft/loose soil etc., in luding trimming bottom and sides of trenches, leveling/grading and ramming bottom of excavation complete all as specified and directed

Removing surplus excaveted soil to a distance exc 250 Mtr and nexc 500 Mtr depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as specified and directed.

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed.

M & L Cement concrete (1:4:8) D2 (40 mm graded aggrigate) in foundations, filling and mass concrete complete all as specified and directed.

M&L Providing reinforced cement concrete M25 as in foundation, including rafts, footing, foundation beams plinth beams, bases for columns etc all as spd and directed.

M&L for RCC M25 as in columns, pillars, post and struts etc complete all as specified and directed. (Rainforcement shall be measured and paid separately).

M & L for RCC M-25 (20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions or rough finished surface complete all as specified and directed.

M L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter or rough finished concrete surface complete all as specified and directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. of rough finished of concrete surface complete all as specified and directed.

M & L for 150 mm thick hardcore of gauge n. exc 63 mm of broken bricks, deposited, spread, and levelled in layer n exc 15 cm thick watered and rammed/rolled to a true surface complete all as specified and directed.

M&L for rubber molded cement concrete factory made coloured glazed interlocking paver block ISI marked any shape and size as per IS 15658 -2006 of 60mm thickness, M-35 Grade, pattern and colour as approved by GE and over and inclduing 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings all completed as specified and directed.

M&L Sand filling under floors or in foundation 25 mm thick and for laying of LT Cable including watering and consolidation complete all as specified

M&L for PCC (1:2:4) type B1 using 20mm graded agg for machine pressesd precast cement concrete kerb stone (300mm x 150mm x 300 mm) including weathering, slightly rounded or chemferred angles and throating, as directed edges complete including excavavtion for kerb stone and filling after embeded including watering and well ramming as spd and directed by engr-in charge. Note size is approved by GE.

M & L Providing cement concrete type B0 1:2:4 using 12.5mm agg in kerbs or mud stops rounded edges completed all as specified and directed

M&L Brick work with fly ash bricks (old size) as per IS 12894 -2002 straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for non skid Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm not exceeding 1 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including screed bed 15mm thick in CM 1:6, complete all as specified and directed

M&L for glazed coloured ceramic tiles 600 x 1200 mm x 7/8 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles over and including plastering 10mm thick in CM 1:4, complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:6 on brick masonary wall surfaces or on fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or on other than fair faces of brick masonary fair finished without using extra cement with using water proofing liquid complete all as specified and directed

M&L 5 mm thick rendering on Ceiling concrete surfaces in cement mortar 1:3 with water proofing compound, incl finish even and fair w/o using extra complete all as specified

S&F aluminium powerded coated (minum 50 micron) anodised partition wall with aluminium frame of size : a) Single Groove Section: 100 x 44 x 1.20 mm thick b) Double Groove section: 100 x 44 x 1.10 mm thick duly fitted with neosprene rubber beading,frosted glass panes 4.8/5 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels including securing with 'U' channels at top joining partatio complete all as specified.

S&F powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :100x40mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S & F in powder coated aluminium door shutters, aluminium section weighing 1.00 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F in powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing including necessary joining cleats,glazing clips, ruber neoprene packing etc. complete all as specified. (Note :- Weight of section should not less than 1.12 kg per RM.)

M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed.

M & L for anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor soil complete as specified and directed.

M&L for two coats OBD on newly plastered wall surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coat of plaster of paris putty of 1 mm thickness complete all specified and directed Note :- Application to be done through authoried apllicator manufacturer

S&F Vitreous China table/counter top wash basin of suitable size with and including SS bottle trap, and cabinet of PVC shutter fixing on counter with 32 mm SS waste coupling, cp sinlge liver mixer for hot & cold , waste pipe complete all as specified and as directed.

S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified and directed.

S&F fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed.

S&F stainless steel of AE- SI 316 grade tubular towel rack including a pair of CP brass bracket complete all as specified and directed.

S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified

S&F fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed.

S&F of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S&F Vitreous china wash down water closet single piece (Cascade pattern) with seamless flushing cistern square design duroplast slim seat cover, slow falling seat cover size 69x37x73CM / 66x35x71 complete, including connection to drain pipe etc complete all as specified and directed.

S & F Brass CP hand shower (health faucet) with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed

S & F water Jet of EWC chromium plated with PVC connection fixed at water closet single piece seat complete all as specified and directed

S&F PVC (SWR) floor trap with CP grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F in 20 mm dia stainless steel 1.0 mm thick fancy type curtain droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed

S & F for Toilet paper holder, vitreous China, Chromium plated with flap guard fixed with screwed in wall as spd and directed

S & F for glass shelf 12 mm thick glass with chromium plated size 200mm x 200mm and fixed with screwed in bathroom as spd and directed

S&F 1000 litres, rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed

Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.

S&F Mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups,spaces and binders and all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut and machine, polished,and moulding, window cills, riser of steps and urinal partition wash basin platforms and flooring,skirting/dados, kitchen like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed complete all as spd and directed.

Supply and providing water proofing treatment with polymeric standard water proofing membrane 3 mm thick having 10 years guarantee for water tightness all as specified and directed and described as under : (a) Prepartion of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacture's specification complete all as specified and directed. (b) Supply & Providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced/ torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed. Make :- IWL Hyperplas Polyster (M/S IWL), Super Thermolay (M/S STP Limited), Torch Shield AP by Pidilite Industries.

M&L 25mm thick cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in floor finishes even and fair to receive floor tiles.

M & L for applying one coats of Bitumen based UV reflective and water proofing aluminium paint over APP membrane and maximum coverage 8.00 Sqm per litre per coat on non assessible roof over APP membrance complete all as specified and directed.

S & F Solid Prelam WPC solid Door Frame of size 105mm x 65 mm, density more than 0.95, moulded preleminated fixing at opening with screw of size 100 mm long 5 mm dia pling & fixing in opening as per specification and directed Note : Colour to be deceided by GE

S&F 30 mm thick solid core one WPC Modular door, one side Prelam and other side plain fixed in the frame at site as per specification & drawing.

S&F Butt hinges, medium weight, Stainless steel and fixed of size 100mm complete all as specified and directed. .

S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed complete all as specified and directed.

S&F aluminum anosided handle 150mm long of extruded section and fixed complete all as specified and directed.

M &L for 100mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 laying over concrete bed for 100mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested complete all as spd and directed

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper with airless electric Sprayer over a coat of primer over 1mm thick wall care putty complete all as specified and directed.

M&L Preparation of old decorated surfaces and applying Two coat of white wash on ceilings all as specified & directed by Engr-in-Charge.

S&F Sheet glass, ordinary quality and glazing with oil putty in square but n exc 0.5 Sqm in each pane 5.5mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture complete all as specified and directed.

S&F in repair Mortie lock, verticle type size 100 mm mild steel complete all as specified and directed.

S & F repair wall panelling of plastic vinyl composite of size 3050 x 254 x 8 mm thick with wooden/plane surface waterproof , termite proof, chemical resistant of light weight fixed with wooden screw with rawl wall plug complete all as specified and directed.

M&L for PVC board false ceiling consisting of powder coated GI wall angle, main T and cross T of 25 mmX 25 mm X 1.40 mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 8 mm thick E- Classic board in pannel of size 600X600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of Electric fitting carefully complete all as specified and directed. Make everest, rajshree

S & F in repairs wooden flooring (make signature) size 1215 x 195 mm and thickness 8.3 mm direct pressure laminated according to EN 13329 for glueless installation heavy domestic and light commercial use EN 13329 lavel of use 22 including under layer of 2 mm EP and polythene layer complete all as specified and directed.

S&F 16 to 18mm thick coloured composite tiles (Granite) area of each tile exceeding 1.20 Sqm but not exceeding 1.50 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. Note : Colour of composite tiles shall be approved by GE.

Supply only liquid water proofing compound conforming to IS specification compelte all as specified and directed.

S&F PVC boards 19/20 mm thick any colour as in cabinets incl shelves and shutters, fixed with screws and adhesives as per direction of engr-in-charge and manufacturers instructions including piano hinges , magnet catcher, handles etc complete.

Double action floor spring hydraulically regulator made up of minimum 1.25 mm thick aluminum alloy sheet foundation box main body with stainless cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 3.5 core.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point.

M&L Modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protection complete all as specified and directed.

S&F GI tubes light grade of dia 80 mm with all fitting and fixed complete for protection of LT UG Cables laid to walls or in floors or along with poles etc complete all as specified and directed.

Supply and fixing garden light LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete

Supply and laying XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall/passing through pipe/pole complete of size 95 sqmm 3.5 core complete all as specified and directed

M&L for replacement of earthing with galvanised earth plate electrode 600 x 600 x 6mm thick burried directly in ground (Earth pit not less than 2.25 metre below ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth strip 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel earth plate surrounded by a packed thickness of char coal or coke dust mixed with common salt in alternate layers of not exc 150mmm thick, PCC Pit in cement concrete 1:3:6 (20mm graded stone aggregate with cast iron cover 10mm thick hinged, cast ironn frame, MS rod 6mm, funnel, GI pipe 20mm medium grade all as shown in Electrical plate NO 3, of MES shcedule part-I including necessary excavation in soft/loose soil, returning, filling in and removal of surplus spoil upto a distance of 50.0 metre and testing on completion complete all as per specified and as directed.

M&L for galvanised steel tubing pipe 40mm bore (dia) light grade with bend, laid in trenches or under roads crossing/ flooring/culverts/footpath complete all as specified and as directed

Supply and install, commissioning and testing cubical type LT Panel box, made out of 3.15 mm thick mild steel sheet outdoor type of suitable size to accommodate the following accessories, CPRI certified factory made cubical type weather and vermin proof fixed on and including ventilaiton and louvers arrangements, required/suitable size and as directed at site with angle iron frame of size 70 x 70x6mm (of length 500mm) 3 phase 4 wire 415 volts, 50 Hz, with front and back openable door (withlocking arrangement) duly powder coat painted over a coat of red oxide primer, with provision of cable entry and exit at mid portion of the feeder pillar box (with cable gland) and providing one number danger notice plate (of size 15 cm x 10 cm suitable for LT line, made out of 0.6mm thick mild steel sheet viterous enameled white with letters, figures and conventional skull and bones in singal red colour fixed with clamps and nuts-bolts of suitable size) and providing necessary foundation of the feeder pillar box in PCC (1:3:6) tyhpe C-2 (using 40mm graded crushed stone aggregate) complete all as directed by Engr-in-charge comprising of the following accessories :- (a) Insulated epoxy coated high conductivity aluminium bus bar 400 amps suitable size for phase and neutral complete all as specified and directed) (b) On Load change over switch three phase 4 pole of capacity 100 amps - 08 Nos. (c) MCCB 200 amps-36KA, 4 pole, 415 volt 50 Hz, adjustable thermal & magnetic setting-02 Nos (d) Digital type multifunciton meter (V, A PF & Frequency) of suitable capacity-01 No. (e) LED indicating lamp assembly R,Y,B phase -01 set (set of 03) Note- (i) All incoming and outgoing cables duly thimbled alongwith suitable size of brass cable glands to be connected with accessories (ii) All MCCB & changeover to be connected intnerally with suitable size of copper strip. (iii) LT panels internal circuit has to be fabricated as per single line diagram attached by rated aluminium Busbar.

Supply and install hi wall split units indoor/ outdoor complete with cordless remote control unit and with cooling and heating function electric driven, single phase of capacity of 2 TR, BEE 5 star rated complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA complete all as specified and directed.

Material and labour for point wiring with single core FRLSH 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- (a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket out let point on an independent board.

(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board.

All as per item 89 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLSH (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLSH PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified.

S & F Modular switch one way 16 A, 1 Module complete all as specified and directed.

S & F Modular bell push 6 Amp, 1 Module complete all as specified and directed

S & F Modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed

S & F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

S&F LED mirror light fitting of 1 x 10 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed.

S&F LED mirror light fitting of 1 x 20 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed.

S&F MCCB Triple pole and neutral 40 Amps 415 Volt curve 10 KA complete all as specified and directed by the Engr-in-Charge.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.

Supply and fix TPN DB -VTPN DB 4 way with provn of MCCB 40 Amps , 415 Volt, 3 Phase, 4 wire AC 50 Hz having aluminium Bas Bar phase and the neutral insulated with PVC sleeves, connected with appropriate size copper thimbles.

Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete as per electrical plate No 3 of SSR Part-I and complete all as specified and directed.

Supply, installing, testing and commissioning Wall mounted fans 450mm sweep, 230 volt, AC, 50 Hz single phase complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc all as specified.

Supply, installing, testing and commissioning exhaust fans PVC body 250 mm sweep, with louvers 230 volt, AC, 50 Hz single phase complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc complete all as specified and directed. Make : Bajaj, Havells, Orient

S &F sheet metal enclouser with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directed.

S & F of 1100 volts grade heavy duty two single core 4 Sqmm size (Nominal Area) PVC insulated (FRLSH) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 4 Sqmm size (Nominal size) stranded copper conductor PVC insulated (FRLSH) (green colour) cable as earth wire complete all as specified and directed. NOTE: - TWO SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH.

S&F LED Bldg Street light fitting 35 - 36W, IP 65 made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP65 protection, roadway luminaire with high power LED as light source 1 x 35/36 Watt, LED 6000K, complete with all accessories internally pre-wired complete all as specified and as directed.

S&F Street Light bracket made of light grade GI pipe 32 mm bore and 1.20 mtr long duly bent to shape including 2 Pairs of MS Clamps made out of 40mm x 3mm M.S. flat, nuts, bolts, washers etc complete all as specified and as directed.

Mohit Enterprises (BID ID -3081053)

Builders Harpal (BID ID -3090860)

UTTRAKHAND BUILDERS (BID ID -3090147)

REHAN CONSTRUCTIONS (BID ID -3090651)

M/S Rajeev Sharma and Co. (BID ID -3089352)