Construction Of A Mini Sports Complex In Survey No. 48/B/1 Of Dariyapur Kajipura In Madhupura Area Of Shahibaug Ward In The cenral Zone

Bill of Quantities

ITEM DESCRIPTION UNIT RATE AMOUNT

Excavation for foundation upto

m depth including sorting out and

stacking of useful materials and

disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft

Excavation for foundation for depth

from 1.5 mt 3.0 m including sorting

out and stacking of useful materials

and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft

Conveyance charges of earth lime,

murrum, building rubbish, manure,

3 garbage, sludge, excavated rock, fly Cum 103.00 235.51

ash, aggregate of any kind etc. comp.

upto 5 km lead.

Extra For Lead Above 5 km & upto

Extra For Lead Above 6 km & upto

Filling available excavated earth

(excluding rock) in trenches. plinth,

sides of foundations etc. in layers

not exceeding 20 cm. in depth

consolidating each disposited layer

by ramming and watering.

Filling in plinth with sand under

floors including watering ramming,

consolidating and dressing

Filling in foundation and plinth with

6 murrum or selected soil in layers of Cum 39.00 286.20

20cm. thickness including watering,

ramming and consolidating etc.

Carring out plinth treatment to post

construction /existing structure by

spraying chemical solution for

termite control treatment including

labour and material consistment

with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC.

As Per 6131_paret-II Consentration

Weight one percent is

recommended i.e one litre 20 EC

chemical emulsion with 19 liter give

1% concrentration inclusive of one

litre chemical emulsion appication

at the rate of 5 Litre chemical /Sqm

of sur face is recommended as per

Providing and laying cement

concrete 1:3:6 (1-Cement:3-

coarsesand:6-hand broken stone

8 aggregates 40mm nominal size)and Cum 74.00 2976.00

curing complete excluding cost of

formwork in (A) Foundation and

Providing and laying controlled

cement concrete M.250 and curing

complete excluding the cost of

formwork and reinforcement for

reinforced concrete work in (A)

Foundations, footings, Base of

columns and Mass concrete.

Providing and laying controlled

cement concrete M.250 and curing

complete excluding the cost of

formwork and reinforcement for

reinforced concrete work in (A)

Foundations, footings, Base of

columns and Mass concrete. BELOW

Providing and laying controlled

cement concrete M.250 and curing

complete excluding the cost of

formwork and reinforcement for

reinforced concrete work in (D)

Columns, Pillars posts and struts,

upto floor two level.GROUND

FLOOR ABOW PLINTH COLUMN

Providing and laying controlled

cement concrete M.250 and curing

complete excluding the cost of

formwork and reinforcement for

12 reinforced concrete work in (C) Cum 64.00 4496.07

Slabs,landing,shelves,Balconies,

Lintels, Beams, Girders and

Cantilever upto floor two level. plith

Providing and laying controlled

cement concrete M.200 and curing

complete excluding the cost of

formwork and reinforcement for

13 reinforced concrete work in © Cum 14.00 4460.36

Slabs,landing,shelves,Balconies

Lintels, Beams, Girders and

Cantilever upto floor two level.

Providing TMT Bar FE 500D

reinforcement for R.C.C. work

14 including bending, binding and Kg 28552.00

placing in position complete upto

floor two level.

Providing formwork of ordinary

timber planking so as to give a

rough finish including centering

shuttering strutting and propping

etc. Height of propping and

centering below supporting floor to

ceiling not exceeding 4 M. and

removal of the same for in situ

reinforced concrete and plain

concrete work in. (A) Foundations

Footings Bases of Columns etc. and

Mass concrete. FOOTING

Providing formwork of ordinary

timber planking so as to give a

rough finish including centering

shuttering strutting and propping

etc. Height of propping and

centering below supporting floor to

ceiling not exceeding 4 M. and

removal of the same for in situ

reinforced concrete and plain

concrete work in. (B) Flat surfaces

such as soffits of supspened floors

slabs Landings and the like. (1)

Floors etc. upto 200 mm in

thickness. CEILIING

Providing formwork of ordinary

timber planking so as to give a

rough finish including centering

shuttering strutting and propping

etc. height of propping and

centering below supporting floor to

17 ceiling not exceeding 4 M. and Smt 270.00 297.68

removal of the same for in situ

reinforced concrete and plain

concrete work in. (G) Columns

PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan.

Providing formwork of ordinary

timber planking so as to give a

rough finish including centering

shuttering strutting and propping

etc. height of propping and

centering below supporting floor to

ceiling not exceeding 4 M. and

18 removal of the same for in situ Smt 242.00 259.88

reinforced concrete and plain

concrete work in. (H) (2) Sides and

soffits of Beams Beam Haunchings

canti-levers Girders Bressumers

and Lintels exceeding 1M.in

Depth.PLINTH BEAM & SLAB BEAM

& LINTEL& COPING

Brick work using common burnt

clay building bricks having crushing

strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine

sand)(B)Conventional

Brick work using common burnt

clay building bricks having crushing

strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement

20 Mortar 1:5. (1- Cement : 5 -fine Cum 60.00 4283.91

sand)(B) Conventional Extra for

brick work in superstructure above

plinth level upto floor two level (B)

Conventional : Ground Floor

(i) Half brick masonry in common

brunt clay building bricks having

crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in

foundation and plinth (B)

Conventional Extra for half brick

masonry in superstructure above

plinth level upto floor two level. (B)

Conventional GROUND FLOOR

Providing 15mm thick cement

plaster in single coat on Rough

(Similar)side of single or half brick

walls for interior plastering upto

floor two level and finished even

and smooth in (ii) Cement mortar

1:4 (1-cement :4-sand) GROUND

Providing 10mm thick cement

plaster in single coat on

brick/concrete walls for interior

plastering upto floor two level and

finished even and smooth in (ii)

Cement mortar 1:4 (1- cement :4-

sand) Extra over items 58 to 71 for

plastering on ceilings and sofits of

stairs up to floor two level instead of

plastering on walls.CEILING

Providing 20 mm thick double coat

mala cement plaster on interior

brick / concrete work for plastering

comprising of base coat of 12 mm

thick cement plaster in cement

24 mortar (1 Cement : 4 coarse sand) in Smt 120.00 269.78

rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1

Cement : 2 Coarsesand) finished

with trovel including scaffolding

curing etc. complete.

20mm thick sand faced cement

plaster on walls upto height

metres above ground level

consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand)

and 8mm thick finishing coat of C.M.

1:1 (1-cement : 1-sand) etc.

Providing and applying 2mm thick

Texture Plaster Terre Plaette

(Specturm , Coral or equivalent)

incoprating fine fillments made of

polymer and aggergating natural

stone powder with making grooves

on base coat of 20 mm thick smooth

mala plaster (which paid

seperately) etc. complete.Colour

and shade as approved by

Architect/ Engineer in charge for at

all floor ,all height.

Providing cement vata (10cm. x

cm. size) quarter round in cement

mortar 1:1 including neat cement

finishing, watering etc. complete.

Applying two coats of putty & two

coats of primer of approved brand

and manufacture on new wall

surface to give an even shade

including thoroughly brushing the

surface free from mortar dropping

and other foreign matter and sand

papered smooth.

Wall painting (two coats) with

plastic emulsion paint of approved

brand and manufacture on

undecorated wall surface to give an

even shade including throughly

brushing the surface free from

mortar droppings and other foreign

matter and sand papered smooth.

Finishing wall with weather proof

exterior emulsion paint on wall

surface (two coats) to give an

30 required shape even shade after Smt 1410.00 113.40

thoroughly brushing the surface to

remove all dirt, and remains of loose

powdered materials.etc complete

Providing and laying Ceramic tiles

6mm thick in flooring treads of

steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-

cement : 3- coarse sand ) finishing

with flush pointing in white cement.

P & L 24" x 24" vitrified 8 mm thick

tile flooring over 20 mm (average)

base of cement mortar 1:6 (

cement: 6 coarse sand) on new

surface or fixing on existing flooring

32 by adhesive material including Smt 17.00 1178.10

dismentaling of existing flooring

and jointed with color cement slurry

including finised with flush pointing

& cleaning the surface etc. complete

for light shade

P&L 24"x24" vitrified 8mm thick tile

flooring over 20mm (average) base

of cement mortar 1:6 (1cement :6

coarse sand) on new surface or

fixing one xisting flooring by

33 adhesive material including Smt 15.00 1383.99

dismentaling of existing flooring

and jointed with color cement slurry

including finised with flush pointing

& cleaning the surface etc.complete

Providing and laying Vitrified tiles

to 10 mm thick , in skrting risers of

steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white

Providing and laying white glazed

tiles 6mm thick in skrting risers of

steps and dedo on 10 mm thick

cement plaster 1:3(1-cement :3-

coarse sand)and jointed with white

Providing and laying Granite slab

(18 mm thick) one side polished

flooring over 20 mm (average) base

of cement mortar 1:6 (1 cement :

coarse sand) or L.M 1:1.5 laid and

jointed with grey cement slurry

including rubbing and polishing

Providing and laying 18 mm thick

polished granite stone machine cut

in single piece (Max. available) in sill

and jambs of door

,window,ventilation & lift wall

cladding,staircase flooring landing,

risers & treads, skirting laid over

mm thick cement mortar 1 : 3 (1

37 cement : 3 coarse sand) and jointed Smt 12.00 3248.00

with grey cement slurry with

matching pigment incl. rubbing and

polishing,half rounding edge and

incl. fixing of hilty fastener at every

1/3 span of sill as required size etc.

complete colour and shed as

approved by architect engineer in

Providing and fixing M.S. grills of

required pattern to wooden frames

of windows etc. with M.S. flats at

38 required spacings and frame Kg 108.00 100.17

alround, square or round bars with

round headed bolts and nuts or by

screws (A) Plain Grill.

Providing and fixing standared

extruded of alluminium section of

size 63mmx 38.10 mm x 1.2mm

@Wt.0.643Kg /mt with colour

anodized alluminium frame for

ventilation with 5mm thick frosted

glassas details etc complete for

Providing and fixing window having

extruded aluminum Colour Powder

Coated section frame main outer

size 63.50 x 38.10 x 1.95 mm,@ Wt

1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm

vertical member of size 61.85 mm x

Kg/mt with sliding shutters of

40 horizontal member size 40mm x Smt 4.00 1688.78

0.456Kg/mt, vertical member of

size 40mm x 18mm x 1.29mm @

wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted

float glass with powder coated

aluminum fittings and fixtures and

transparent silicon sealant glass

fixing to frame as per details etc.

complete for window

Providing and fixing flush door both

sides laminated and I.T.W. beading

all around by using I.T.W. frame

m.m. x 80m.m.. shutter 35 mm thick

solid core malemine faced three

layered pre laminated flat pressed

41 wood based exterior grade bonded Smt 5.00 3889.35

BWP/BWR synthetic resin having

stamped IS 12823 grade I type II

including three coats of lacquer

polishing to exposed wooden

surfaces and Stainless steel

decorative type designs fixtures /

fastening etc.including I.T.W.

triangular batten patti of size

30m.m.x30m.m.etc. as per

architectural detailed drawing and

as directed by engineer in charge.

Providing and fixing FRP frame size

125x65mm and 35 mm thick FRP

shutter with wood grain raised

pannel edde sign finish shutter

having extra reinforcement on sides

& edges in Gel coat finish. The core

of the shutter & frame is to be filed

up with injected polyurethene foam

42 done in situa long with embedded Smt 5.00 1999.98

wooden pieces for stiffening & also

taking hinges & fintures. The whole

FRP frame &shutter is to be water

proof weathe rproof ,termite proof

& resistance to mild acid/alkali.

Rate sare to be inclusive of S.Shinges

with fastener sleeve & alluminium

fixtures & fastenings.

Providing & applying CHEMICAL

WATER PROOFING treatment to

the terrace including Surface

cleaning: All surface shall be

thoroughly cleaned with mechanical

means or wire brush to remove

dust dirt & all loose portion from the

surface of terrace & parapet wall.&

wash with water. Surface preparing:

All cracks will be opened in V-shape

& sealed wirh Dr Fixit Crack X Paste

& any patch work will be repaired

with polymer modified mortar,

providing and applying two coat of

Dr.Fixit pidifine 2K on entire inside

area of sunk. Two coat of Dr.fixit

pidifine 2K(10 kg Powder + 5 lit

Liquid) shall be applied on ready

surface in vertically & horizontally

direction which is brsh applied

waterproofing coating & provides

excellent impermeable coating &

flexible enough to take care of minor

cracks in concrete & plaster & good

adhesion with cementitious

surfaces etc. completed by EIC.

Providing and laying broken chine

mosaic flooring for terrace using

mm to 20 mm broken pieces of

glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to

44 be tempered to bring mortar creme Smt 21.00 739.89

out upto surface using white cement

including rounding off junctions and

extending them upto 15 cm along

the wall,clearing with water and

oxalic acid etc. as directed.

Structural steel work ( Confirming

to IS 4923-1997) riveted, bolted or

welded in builtup for all type

sections, in framed work, including

45 cutting, hoisting, fixing in position Kg 21784.00

and applying a priming coat of

approved steel primer all complete

as per the structural designs and

directions of Engineer in charge.

Painting one coats (excluding

priming coat) on previously printed

steel and other metal surface with

46 synthetic enamel paint, brushing to Smt 1779.00 43.79

give an even shade including

cleaning the surface of all dirt, dust

and other foreign matter.

Paver Block Providing and laying

shot blasted Non - interlocking,

Paver blocks of specified thickness,

size, grade of concrete and colour

machine made and blasting by

automatic shot blasting machine

and high density of as per approved

sample of approved make for

footpath, parking areas, service

lanes,cross over and other areas as

mentioned in the drawing. Including

providing and laying 50 mm thick

averave bedding layer of coarse

sand below paver block as per

required grading and specification.

Laid paver block shall be

mechanically compacted. The work

47 of the paving blocks shall be Smt 165.00 758.92

executed in line and level by skilled

mason of flooring work only. Small

size of paver block with same

specification shall be used at

residue or at end. It should be laid in

such a way that the no cutting of the

paver block to be necessary. If

cutting of paver block shall be

required , than cut by machine only

and laying to be done by skilled

flooring mason. The finished surface

of the paver block shall have coarse

sand Texture Finish. Pave blocks

shall be compacted and shall be re-

laid if necessary. Actual laid area

shall be measured and paid without

Pre cast concrete kerb Providing

and fixing M25 Grade of concrete

precast exposed / Fair finish /

texture finish kerb stones of

approved make as per approved

sample of any size and any type.

Kerbs shall be fixed on the

48 foundation prepared as per Rmt 275.00 912.50

approved design. The rate shall also

include for erecting and fixing the

pieces in position for complete kerb

system with chamfered type of

kerbs including necessary

accessories of kerb like radius

kerbs, angles and quadrant kerbs,

droplet kerbs etc. complete as per

drawing. Kerb shall be fixed as

paper joint without any jointing

material. However cement mortar

shall be provided at the backside of

kerb stone joint. (Sample must be

approved) Cost of excavation,

cutting , base , side filling shall

includes as directed engineer -

incharge in above item description

as per BOQ (b) 380 x 600 x 150 mm

high Footpath kerb. As per

Providing & Laying P21(water

reducing concrete admixture at

ml per bag of cement & recon 3 s

fiber at 125 gm per bag of cement

including making C channel 75 x

mm required to maintain level,slope

49 and thickness of the concrete road Smt 265.00 175.00

leveling of placed concrete with

surface vibrator and finishing with

power floater & trowel light

brooming the surface & Groove

cutting & filling of expansion joint as

directed by Engineer in charge.

Providing, laying, spreading and

compacting Wet Mix Macadam (as

per table 400 - 10 and 400 - 11) of

well graded stone aggregate to

specification including premixing

the Material with water at OMC in

mechanical mix plant as per

approved design mix, carriage of

mixed material by Tipper to site,

50 laying in uniform layers with motor Cum 53.00 1710.00

grade/Front end Loader/paver

finisher, in sub base/base course on

a well prepared under base and

compacting with vibratory roller to

achieve the desired density

including lighting, guarding,

barricating and maintenance of

diversion etc. (MoRTH specification

: Clause 406) by mechanical means

Providing and laying rubble soling,

23 cm thick, in a compact manner,

foudation, road, footpath etc. using

200 to 230 mm. cut size stones,

covering and levelling the surface

with a layer of murrum after filling

the voids with smaller sized stones

or stone chips, including watering,

ramming well and consolidating

each layer, as directed.

Providing and laying of Hot applied

thermoplastic compound 2.5 mm

thick including reflectorizing glass

beads and 250 gms per Sq.m. area

thickness of 2.5 mm is exclusive of

surface applied glass beads as per

IRC-35 2015. The finished surface to

be level/uniform and free from

streaks and holes or chipping of

Thermoplastic if any and including

primer coat for C.C. surface and

A.C.C. surface, in white and/or

yellow colour. Rate includes

brushing, blooming and cleaning

and application of paint. Zebra

patta/Bump patta/Lane line/Center

line/Cut patta, Directional Arrow,

Lettering MoRT&H Clauses

&Volume II Part III and IRC 35-

2015.Rate shall include brushing,

brooming, painting and repainting

of worn out paint after a period of

2.5 years. Note:-As per drawings

and design supplied by architect

and instruction given by authority

Providing & Fixing the Chikenmesh

- 20 guage(Crimp Jali) of approved

size applying between the RCC and

masonry junction in proper line,

level and plumb with all material,

labour, tools, tackles and

equipment. Including providing and

fixing the jali with nails, etc

complete as directed by the site-

Providing and fixing 1.20 Metre high

fencing with 2.0 Metre long M.S.

Angle posts 40mm x 40 mm x6 mm

54 and oil painting 3 coats fixed at 2.5 RMT 94.00 385.40

Mt,C/c. with five Horizontan lines

and two diagonals of galvanised

steel barbed wire weighting 9.38 Kg.

per 100 Metre, strained and fixed to

posts with G.I,staples including

fixing the postsin ground with 0.5 M

x 0.5.M x 0.5 M. block in C.C1:5:10

A polyethylene lawn is a surface

made of synthetic fibers

manufactured from polyethylene

(PE) plastic, designed to look and

feel like natural grass. It is a type of

55 artificial turf commonly used in SMT 162.00 1183.60

residential and commercial

landscaping, sports fields, and

recreational areas due to its

durability and low maintenance

LAYING OUT LAWN – After

excavating soil upto 30 cm. depth&

removing unwanted stuff, stones

etc. Preparing soil for planting by

supplying and mixing 6 inch river

fine site and 0.5 cmt FYM maximum

100 sqmt of lawn area and doing

56 termicide @ 1 fit / 100 sqmt area Smt 45.00 90.00

and planting selection 1 type /

approved lawn grass at maximum

cm x 6 cm distance and maintain it

upto 120 days. Maintainance

include all operations i.e. watering,

grass cutting, gap filling, applying of

fertizer if require etc.

Supplying, Spreading and leveling of

57 good earth like firtile soil as directed Cmt. 50.00 550.00

Supplying, Spreading and leveling of

58 good quality river Kap Filling 100 Cmt. 25.00 650.00

mm as directed etc comp.

Supply and Planting saplings of

Hedge plants like kadvi mahendi,

karmda, dyuranta, nikodeviya etc.

specifies bag size is 4 inch x 6 inch,

well established & free from disease

at site. as per the instructions

Supply and Planting saplings of

(Jasud, Ixora, Ticoma Gaudi-chaudi,

Gultora, Jetropha, Haemeliya,

Chandani, Mogaro, Galfemia,

Allamenda, Desi Gulab, Euphorbia

mili, Jasud Hybrid, Chandani double,

Madhukamini, Madhumalti, Ticoma

Capensis, Ixora draft, Nikadevia,

English Karen etc.) having height of

minimum 2.00 to 2.5 ft. and bag size

is 8 inch x 10 inch, well branched,

well established & free from disease

at site as per the instructions.

Supply, Spreading and leveling of

61 Brick dust (Chharu) particle size cmt 25.00 900.00

having maximum 10 mm

Providing in position PVC sleeves of

6kg/cm2 uPVC pipes of following

diameters of taking out service

pipelines, cables etc. up to 0.75 mtrs

length. For all floors / all levels / all

Providing and fixing RCC Bench as

63 per required drawings and Nos. 2.00 15000.00

instruction by site incharge

Providing corrugated G.I. sheet of

class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts

and nuts 8mm diameter with

64 bitumen and G.I. limpet washer or Smt 87.00 719.93

G.I. limpet washer. filled with white

lead complete excluding the cost of

purlins, Rafters and Trusses.(1)

0.80 mm thick sheet.

Demolition including stacking of

serviceable materilas and disposal

of unserviceable materials with all

lead and lift. (i) R.C.C. work

Clearing and grubbing road land

including uprooting rank vegetation

grass bushes,shrubs,sapling and

trees girth up to 300 mm removal of

stumps of trees cut earlier and

disposal of unserviceable

materials(D) By mechanical means

in area of thorny jungle

Providing erecting and fixing double

coated Syntex PVC. (ISI) water tank

67 of required capacity each with all litre 3.91 2500

necessary fittings and connection

etc. complete on terrace.

Providing and fixing wsh down

water closet (European type, W.C.

68 Pan) with integral P or S trap Each 1323.07 2

including jointing the trap with soil

pipe in Cement Mortar 1:1

(1-Cement : 1-fine sand) (Seal and

cover to be measured and paid for

separately)(A) vitreous China

Pattern :(i) in white colour

Providing and fixing 12.5 Litres low

level flushing cistern with a pair, of

C.I. or Mild brackets, complete with

fittings such as lead valve less

syphon, 15mm nom.nal size brass

ball valve with polythene float, C.P

brass handle unions and couplings

for connections, with inlet, outlet

68 and overflow pipes, 40mm dia. Each 2346.92 2

porcelain enamelled flush bend

including cutting holes in walls and

making good the same connecting

the flush bend with cistern and

closet (overflow pipe to be

measured and paid for

separately)(A) Vitreous China (I) In

Providing and fixing plastic seat and

cover for wash down water closer

69 with C.P. brass hinges and rubber Each 288.45 2

buffers. (B) Black plastic seal and

Providing and fixing washbasin

with single hole for pillar tap with

C.I. or M.S. brackets painted white

including sutting holes and making

good the same but excluding

fittings.(A) Vitreous China:(ii) Flat

Back washbasin 550 mm x v 400mm

size. (i) In white colour.

Providing and fixing C.P. brass

70 waste for washbasin or sink. (B) Each 88.94 2

Providing and fixing M.I. fisher

70 union for washbasin or sink. (B) Each 87.77 2

Providing and fixing 100mm sand

71 cast iron grating for gully, floor or Each 36.61 2

Providing and fixing 600mm x

450mm bevelled edge mirrror of

superior glass mounted on 6mm

thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P.

brass screws and washers.

Providing and fixing 600mm x

120mm glass shelf with C.P. brass

72 bracket and guard rail complete Each 529.52 2

mixed to wooden plug with C.P.

Providing and fixing toilet paper

holder.(A) C.P. Brass

Providing and fixing screw down

bib taps of following size.(B) Brass

chromium plated screws down Bib

Tap. (ii) 20mm dia.

Providing and fixing pillar tap,

capstan head, screw down high

pressure with screws, shanks and

back nuts.(ii) 20mm dia.

Providing and fixing chromium

plated brass half trun flush cock of

approved quality including fixing in

pipe line etc. complete.(i) 20mm dia.

Providing and fixing Urinal or

approved quality including

conecting the Urinal with waste

74 pipe , tap etc. complete.(A) White Each 1051.66 2.00

earthenware flat back or corner

type size 430mm x 260mm x

Providing and fixing Rubber plug for

sink or wash basin.

Providing and fixing chromium

plated, bottle trap with necessary

couplings of approved quality for

Providing and fixing ball cock of

76 approved. quality as directed.(A) Each 187.96 2.00

Copper Metal (ii) 50mm dia.

Providing and fixing Angle Cock

with screw, back nuts all necessary

76 fittings etc. Completed Each 496.00 3.00

(Cera-CM108/ Parryware-T9939A1

/ Hindware-F100043)

Providing and fixing 12mm dia.

Health faucet with 8 mm dia of

JAQUAR / HINDWARE/ CERA or

approved make selected by

Architect with flexible pipe of 1mt.

length and holding stands complete.

Model Equivalant to Jaquar- CAT -

Providing and fixing concealed

center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having

National Sanitation Foundation

77 (NSF) seal for potable water of Rmt 206.73 24.00

following dia. nominal bore tube

fittings and clamps including

making good the wall, ceiling and

floor etc. complete. [B] 20 mm.

Providing and fixing concealed

center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having

National Sanitation Foundation

78 (NSF) seal for potable water of Rmt 334.89 18.00

following dia. nominal bore tube

fittings and clamps including

making good the wall, ceiling and

floor etc. complete. [D] 32mm.

Providing and fixing concealed

center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having

National Sanitation Foundation

78 (NSF) seal for potable water of Rmt 443.29 18.00

following dia. nominal bore tube

fittings and clamps including

making good the wall, ceiling and

floor etc. complete. [E] 40mm.

Providing and fixing Gun metal

79 check or non-return fullway wheel Each 346.00 1.00

valve.(C) 20mm dia.

Providing and fixing to wall ceiling

and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the

following outside Dia. Low densidy,

complete with special falnge

compression type fittings, wall

clipsetc. including making good the

wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling

and floor 10.0 Kg. F/Cm2 working

pressure poluthene pipes of the

following outside Dia. Low densidy,

complete with special falnge

compression type fittings, wall

clipsetc. including making good the

wall ceiling and floor.(G)110 mm

Constructing Manhole with R.C.C.

top slab in 1:2:4 mix (1-cement :2-

coarse sand : 4-graded stone

aggregate 20mm nominal size)

foundation concrete 1:3:6 mix

(1-cement : 3- coarse sand :6-Brick

bats 40 + 50mm size) inside

plastering 15mm thick with Cement

Mortar 1:3 (1-Cement : 3-coarse

sand) finished with a floating coat of

neat cement and making channels in

cement concrete 1:2:4 mix (1-

Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size)

finished smooth complete including

curing and festing (i) Inside size

900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size

560mm diameter total weight of

cover and frame to be not less than

128 kgs. (Wt. of cover 64 Kg. and Wt.

of frame 64 Kg.)(A) With 230mm

thick walls of brick msonry using

brick having crushing strength not

less than 35Kg. /Sq.cm. in Cement

Mortar 1:5 (1- Cement: 5-Coarse

sand)(1) A type depth 0.90 Metre

for 150mm diameter sewer.

Point wiring for Light / Bell with 2-

1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand

copper wires, in following type of

pipe to be erected concealed in/ on

surface on wall/ceiling complete with

6A Modular type switch / bell push &

accessories and earth continuity of

81 following type, erected on PVC / Pt 505.05 5.00

Metallic box, single mounting base

frame covered with textured/metallic

front plate modules erected on / in

wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

(a) with medium class Rigid PVC pipe

82 and accessories erected flushed on Pt 467.25 3.00

wall/ceiling complete CAT-III

Point wiring for Modular secondary

light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of

ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires,

in below type of pipe to be erected

complete with earth continuity and

necessary connection with primary

light with accessories erected on

Metal / PVC / wooden box covered

with 3 mm thick PC(Polycarbonate) /

Acrylic sheet for open / concealed

wiring. with necessary Lamp holder /

ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid

PVC pipe and accessories erected

concealed in wall/ceiling complete -

Note:- Maximum up to 6 mtrs length,

excess will be considered as Mains for

Secondary Point.

(a) with medium class Rigid PVC pipe

84 and accessories erected flushed on Pt 137.55 3.00

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm

& earthwire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade

ZHFR PVC insulated multistrand

copper wires, in following type of pipe

to be erected concealed in / flushed

on wall/ceiling complete with 6A

Modular type switch and hum free

EME four or more step type electronic

fan regulator with separately

85 mounted and accessories with earth Nos 701.4 1.00

continuity of following type erected

on PVC / Metallic box, single

mounting base frame covered with

textured/metallic front plate modules

erected on / in wall / ceiling as per

pipe erected. with necessary ceiling

rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

Providing following type of Modular

Type Accessories mounted with PVC /

metallic/Wooden box, single

mounting base frame covered with

86 textured / metallic/white front plate , Ea 179 25.00

modules erected with necessary

connections as per site situation

directed by Engineer In charge. (9)

Amp. SP one way switch Cat.III

87 (2) One No 6 pin plug Cat.III Ea 150 5.00

(10) 6/16Amp. Universal socket

Providing & erecting Switch board for

Computer or electric apparatus

consisting of following items in single

board erected on PVC / Metal board

with 3 mm thick PC (Polycarbonate) /

89 Acrylic sheet erected as directed for Ea 1122 2.00

[B] modular type accessories

1 no. 6A/16A universal plug-switch

combined. CATIII

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

90 MAINS WIRING AND CONDUIT

Providing and erecting ISI mark

Medium class RIGID PVC PIPES of

following size complete to be erected

on/in wall or ceiling erected with

necessary PVC fittings & Junction

boxes fixed with adhesive solution &

Clamps with following dia of pipes, in

approved manner as directed

Providing and erecting Mains with

KV grade FRLS PVC insulated ISI

marked stranded Copper conductor

wire in following type of pipe to be

93 erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated

stranded wire of green colour for

earth continuity of following size

(A) With medium class Rigid PVC pipe

and accessories

95 (a) 2 wire 1.5 sq. mm Mtr. 62 100.00

96 (b) 2 wire 2.5 sq. mm Mtr. 82 100.00

FANS & EXHAUST FAN

Providing & erecting Approved make

Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz

99 mm sweep complete having 3blades Ea. 1929 1.00

with aluminium blades with , canopy

& 30 cm. down rod erected with

earthing.(Make shall be approved by

Engineer in charge))

Supplying and erecting 19 / 20 mm.

nominal bore Medium Class M.S. Pipe

100 down rod erected duly painted for fan Mtr 107 1.00

complete with necessary 24/ O.20,

core flexible wire with earthing.

Supplying & erecting fan hook box of

10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side

101 and pierced through a 16 Gauge M.S. Nos 107 1.00

box / Heavy Duty PVC box complete

erected concealed in Ceiling with

necessary finishing.

Supplying & erecting approved make

low noise decorative Exhaust fan

102 having size 200mm with 1350 RPM Nos 1687 2.00

with square frame ABS body with

inbuilt lowers & square frame.

103 LIGHTING FIXTURES :

Supplying and erecting led lamps with

following wattage capacity of 220 to

240 voltage, minimum 15000 burning

hours life, 500 V in built-surge

protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5. (A) LED Lamps

integral type, with PC diffuser suitable

LAMP holder. (iii) 10 to 15 watts. Cat-

Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single

MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS:

513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more

than 0.95, THD < 15 %,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage

capacity between the ranges shown.).

(A) Square/ Circular shaped

Surface/Recessed Mount Downlight

with provision for spring loaded

mounting clips complete.IP20. (iii) 16-

20 watts, Surge-2 KV. Cat-lll

106 DISTRIBUTION BOXES

Providing and erecting Sheet Steel

powder coated MCB distribution

board - flush / surface mounted fitted

with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 &

3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The

DBs should be used of same company

of MCB to be used) suitable for. (A)

single phase incoming and horizontal

single phase outgoing. (iii)Single

phase 8 way SS Double door

Providing and erecting Sheet Steel

powder coated MCB distribution

board - flush / surface mounted fitted

108 with busbar, neutral link, earth bar Ea. 2316 1.00

and DIN rail, confirming to IS

and BS 5486-1986 without MCB to

house appropriate nos. of MCBs i)

Three phase 4 way SS Double door

for horizontal single phase outgoing

Providing and erecting Sheet Steel

powder coated MCB distribution

board - flush / surface mounted fitted

with busbar, neutral link, earth bar

and DIN rail, confirming to IS

and BS 5486-1986 without MCB to

house appropriate nos. of MCBs iv)

Three phase 12 way SS Double

door for horizontal single phase

110 MINIATURE CIRCUIT BREAKER

providing and erecting Miniature

circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C.

111 system and having breaking capacity

10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI

112 Cat.III Ea. 111 28.00

Providing & erecting 240 V MCB

double pole switch for lighting Load (B

113 Curve) having 10 KA breaking capacity

& confirms to IS : 8828 in existing box

having following capacity

114 (A) 6 to 32 Amp.

115 Cat.III Ea. 276 1.00

Providing & erecting 415V MCB Four

Pole Switch for Lighting Load (B curve)

116 having 10KA breaking capacity &

confirms to IS :8828 in existing box

having following capacity

118 Cat.III Ea. 730 1.00

Approved make ELCBs / RCCBs

conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and

120 suitable for operation on single phase Ea 1950 1.00

240 V. having characteristic of quick

action & tripping with all advance

feature & do not incorporate any

electronic component. for following

Max. rating erected as directed (i)

Amps.DP Cat. III

Approved make ELCBs / RCCBs

conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and

suitable for operation on single phase

121 240 V. having characteristic of quick Ea 2213 2.00

action & tripping with all advance

feature & do not incorporate any

electronic component. for following

Max. rating erected as directed (ii)

Amps.DP Cat. III

Providing and erecting

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium

123 conductor for 1.1 KV. to be laid on

wall with necessary clamps or in

existing trench / pipe of following size

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for

1.1 KV. to be laid on wall with

necessary clamps or in existing trench

/ pipe of following size of cables

126 (A) 4 core 16 Sq. mm Mtr. 152 40.00

127 (B) 4 core 25 Sq. mm Mtr. 189 50.00

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium

128 conductor for 1.1 KV. to be laid on

wall with necessary clamps or in

existing trench / pipe of following size

129 (C) 4 core 10 Sq. mm Mtr. 139 250.00

Providing and erecting

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Copper

130 conductor for 1.1 KV. to be laid on

wall with necessary clamps or in

existing trench / pipe at road crossing

or floor of following size of cables.

131 (B) 4 core 4 Sq. mm Mtr. 361 20.00

132 (C) 4 core 6 Sq. mm Mtr. 505 20.00

Making trench in soft soil of suitable

width of 90 cm deep for laying cable

133 or locating the fault all over the run Mtr. 55 250.00

and back filling the same and making

the surface as normal ground.

Providing & laying approved make

Double walled corrugated pipes

(DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting

accessories of same material at

required depth in existing trench for

laying of cable. below ground / road

surface for enclosing cable

135 (A)50 mm outer dia Mtr. 62 110.00

136 (B)63mm outer dia Mtr. 73 110.00

137 CABLE GLAND

Providing and, fixing heavy duty

flange type brass cable gland with

rubber ring for PVC insulated

armoured cable complete with out

going tails, insulating tape etc for

following size of cables.

140 (C) 2 to 4 core 10 Sq. mm Ea. 38 40.00

Providing and, fixing heavy duty

flange type brass double compression

type cable gland with rubber ring for

141 PVC insulated armoured cable

complete with out going tails,

insulating tape etc for following size

Solder less crimping type Aluminium

lugs conforming to IS suitable for

cable of following size evenly crimped

144 with high pressure tool & connected

to switchgear terminals with

brass/cadmium plated nut bolts in an

approved manner.

149 EXTERNAL STREET LIGHT

Street Light Pole

Supply of approved make GRP / FRP

Pole having following specifications:

GRP Light Pole made by CNC filament

winding machine using thermoset

resin polyester/epoxy resin system)

having minimum 62% glass content.

The pole should be in one piece and

tapered round in shape, having

smooth finish and should be totally

free from corrosion as well as non

conductive & shock proof Pole should

be provided with FRP Anchor Base

and it should be heavy duty, or MS

Material duly painted with Epoxy

paint. Pole should be flame retardant

as per IS 6746. Resin used shall be UV

resistance and pigmented. A highly

weather resistant polyurethane

coating shall be applied to the pole

after applying suitable primer system

that ensures proper adhesion of the

paint. Minimum coating thickness

shall be 80 to 100 micron. Deflection

of the pole shall not exceed more than

10% of the length of pole for the given

load“? Pole should be generally made

as per the dimensional data,

performance criteria and some

interchangeability features of poles as

standard ANSI C 136.20 latest version

or ASTM D 4923/01 . The size of pole

and type of installation are as below

Supply of approved make FRP Pole

having following specifications: FRP

Light Pole made by CNC filament

winding machine using thermoset

resin polyester/epoxy resin system)

having minimum 62% glass content.

The pole should be in one piece and

tapered round in shape, having

smooth finish and should be totally

free from corrosion as well as non

conductive & shock proof Pole

should be provided with FRP Anchor

Base and it should be heavy duty, or

MS Material duly painted with Epoxy

Pole should be flame retardant as per

IS 6746. Resin used shall be UV

resistance and pigmented. A highly

weather resistant polyurethane

coating shall be applied to the pole

after applying suitable primer system

that ensures proper adhesion of the

paint. Minimum coating thickness

shall be 80 to 100 micron. Deflection

of the pole shall not exceed more than

10% of the length of pole for the given

load“ Pole should be generally made

as per the dimensional data,

performance criteria and some

interchangeability features of poles as

per standard ANSI C 136.20 latest

version or ASTM D 4923/01 including

cable termination box with necessary

accessories . The size of pole and type

of installation with foundation as per

manufacturer details and site

requirement are as below .

(1) Suitable for base plate mounting

single arm Bracket.

[H] Overall length of 6 Mtr. Average

Thickness: 7.5mm

Top/ Bottom OD Dia A/F 89mm ±

2mm approx. approx. Weight of Pole

32 kg approx. (Without Base) Anchor

Base (Size 300X300 & 18mm Th.)

(2) Suitable for base plate mounting

Double arm Bracket.

[C] Overall length of 6 Mtr. Average

Thickness: 8mm.

Top/ Bottom OD Dia A/F 114/174 mm

156 ± 2mm approx. approx. Weight of Ea 14747 10.00

Pole 38 kg approx. (Without Base)

Anchor Base (Size 300X300 & 18mm

Providing 1:2:4 cement concrete

foundation & 70 % PCC from bottom

including excavation for the pole of

size 45 x 45 x 100 cm. Deep in below

157 ground level with plinth of 45 cm x 45 Ea. 801 30.00

cm (or 45 cm dia x 45 cm) high upper

ground level with necessary curing

and finishing in approved manner.

( for 4 & 6 mtr pole)

Providing cement concrete.for

foundation or for concrete filling in

1:2:4 ratio with 20 to 25 mm stone

metal duly plastered with necessary

curing for pole muffing or any other

Providing FRP arm bracket of having

2 sets of suitable SS304 hardware for

159 fixing the brackets & spread of 1.2 Ea

Mtr(Suitable for 89 to 114 mm pole

160 (A) Single arm bracket Ea 2526 20.00

161 (B) Double arm bracket Ea 3895 10.00

162 (C) Triple arm bracket Ea 5259 10.00

Supplying and erecting LED street

light / Flood light fittings with High

power White LEDs wattage of 3 Watt

and above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminum housing

with smooth finish powder coated

and heat sink extruded aluminium

with diffuser and Polycarbonate

optics/ lenses, with toughened glass

with company mark/name engraved

or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.). (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light

must have 440VAC line supply with

over-voltage protection. (iii) Above

to 90 watts cat-III

(B) Flood Light (IP-65), Surge

protection -4KV integral and Light

164 must have 440VAC line supply with Each 7195 21.00

over voltage protection. (iv) above

to 120 watts cat-III

Supplying and erecting Flexible PVC

insulated multi strand multi core

165 kv grade ISI marked copper wires of

following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC

Supplying & erecting approved make

IP 55 grade Company fabricated Timer

Panel of following capacity for switch

On-Off street lights on time

scheduling basis made from 16G

CRCA sheet duly epoxy power painted

inside and outside with hinged doors

167 and locking arrangement consisting of

suitable size of 4 Pole MCB and 4 pole

contactor (cat-III)with analog time

switch, auto manual switch of same

make and suitable input and output

Bakelite terminals and with door

earthing approved by Engineer in

Providing and erecting Annealed bare

Copper wire 8 to 16 SWG.

Supplying & erecting in earthpit of

minimum bore dia. 225mm size

approved make Safe Earthing

Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made

of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 80 mm

having 80-200 Micron galvanising,

Inner pipe dia of 40 mm having 200-

250 Micron galvanising, connection

terminal dia of 14 mm with constant

ohmic value surrounded by highly

conductive compound with high

charge dissipation suitable for

following type of applications with

chamber and heavy duty

cover.(approved make OEM has to

submit test certificate including value

of earth resistane of installation.

[A] For electrical installation up to

172 Length of Pipe - 1 Mtr Ea 5785 2.00

Back filling compound - 1 Nos. of Bag

[B] For Electrical installation up to

KV located in other than normal soil

i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of

[C] For Electrical Installation covering

Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant &

Sensitive Computer System(like

Automation, SCADA)i.e.

174 independent Earthing located in Ea. 10489 2.00

other than normal soil i.e. Soft Rock,

Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of

175 WATER COOLER AND PURIFIER

Providing & erecting water cooler

having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @

an ambient temp of 45˚ C. The outlet

temp. of the water should drop by

15˚C within a hour, The water cooler

should be comprising of hermetically

sealed compressor, fan motor,

condensing unit, water tank

surrounded by evaporating, coil,

thermostats, relay etc.complete with

necessary inlet & outlet connection.

The body of water cooler will be made

from Stainless Steel.

Supplying and erecting water filter

177 cum purifier with ultra violate Ea. 5371 1.00

technology. (Aquaguard / waterdoc

model or equivalent symphony/

crystal/videocon model)

Supplying & erecting carbon dioxide

(CO2) fire extinguisher user of

following capacity with necessary

178 clamps made from 50 x 6 mm M.S. Ea. 6250 5.00

Flat with nut & bolts grouted in wall

[A] For 4.5 Kg Capacity

Supplying & erecting D.C.P. type fire

extinguisher for following capacity

cartridge type with gun metal cap

gram CO2 gas cartridge, powder and

brackets confirming to IS 2171

and complete erected with necessary

clamps made from 50 x 6 mm M S Flat

with nuts and bolts grouted in wall

[B] For 10 KG Capacity

Supplying, installation testing &

commissioning of approved quality

(class-c) conforming to as per IS

/ IS 1239 such as tee, elbows, check

nuts, flanger, nipples etc., including

cutting welding, trending fixing on

walls, ceiling (using 41- tech pip e/

180 M.S. Angle supports work includes -

two coats of metal primer and two

coats of red enamel paint etc.,

Note : The piping installation has to

be put to hydraulic test to 1.5 times

Working pressure before applying

paint or pipe coating and wrapping

181 (1) 80 mm diameter R. Mt. 1133.22 5.00

183 (3) 150 mm diameter R. Mt. 2084.64 5.00

184 (4) 200 mm diameter R. Mt. 2955.26 - -

Fire Hydrant Landing Valve (Internal /

External) (Stainless Steel (SS-304) , ISI

Supply, Installation and Testing of:

Fire Hydrant Landing Valve with

necessary pipe fitments, hardware

190 and consumables. Nos. 6046.87 2.00

MOC:-Body: Stainless Steel (SS-304),

Working Parts: Stainless Steel (SS-

304), Coupling: Stainless Steel (SS-

304) , Standard: -ISI Marked.

Size:-63 mm (Flange End: NB 75 mm,

Fire Hose Pipe (Delivery Hose)- 63 mm

Supply, Installation and Testing of:

Fire Hose with Hose Couplings.

Stainless steel male and female

coupling bound and rivetted to hose

pipes with copper rivets and copper

191 wire complete as required. Nos. 4332.31 2.00

RRL (ISI Mark- Type A) Fire Hose.

Hose Couplings: ISI Marked Stainless

With SS Wire Binding.

Standard: - ISI Marked & TAC

Size:-63 mm dia x 15m long Hose.

Providing, fixing, testing and

commissioning of Wall mounting

swing type first aid Fire Hose Reel

192 with drum, hanging bracket, 30 M x 25 Nos. 12513.9 2.00

mm dia high pressure hose reel tubing

as per IS:884 with shut nozzle and ball

valve and all required accessories.

Supply, Installation, Testing and

Commissioning of Weather proof

Standard Fire Hose Cabinet wall

mounting type (750 mm x 600 mm x

250 mm deep) having Double door

opening with necessary locking

arrangement by allan key suitable for

housing 2 no.x15 mtrs. hose pipe,

1no. Branch pipe& nozzle spanner.

Duly synthetic enamel painted.

Fire Hose Nozzle- Short Branch Pipe

Supply, Installation and Testing of:

Short Branch-pipe Nozzle.

MOC: Stainless Steel (SS-304).

194 Standard: ISI Marked, Heavy Quality. Nos. 1664.48 2.00

IS : 903, suitable for 10 Kg / sq.cm

operating pressure and suitable for

interconnections to hose pipe

coupling as required.

Size:- 63 mm X 20 mm

Supplying and fixing specially

designed gunmetal orifice plates

made out of 6 mm thick stainless steel

(Grade 304) on hydrant outlets of

landing valves including distant pieces

of suitable size for adjustment of

delivery pressure of 3.5 kg/ sq.cm as

required by LPA complete with

necessary companion flanges, nuts,

bolts, gaskets etc. complete.

Providing, fixing, testing &

commissioning of 15mm dia quartzoid

bulb type sprinklers of rating with

required accessories :

Pendent Sprinkler 57°C standard

response (K-80) UL Listed

Supplying, installation, testing &

commissioning of sprinkler flexible

pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer

thread with maximum working

pressure of 175 PSI test pressure of

875 PSI (Burst) with branch line (Inlet)

25mm NPT male thread to sprinkler

head (Outlet) 15mm NPT female

thread with reducer, nipple, 2 side

brackets,center bracket, stockbar of

following sizes complete as required

etc of following sizes as required. (700

Supply, Installation, Testing and

Commissioning of IP based 4MP

resolution Dome Camera, Vandal

Proof, 2.8mm Lens, Fixed Iris,

horizontal field of view:110°,Vertical:

77.6°, 30M IR, Shutter Speed 1 s to

1/100,000 s, DC12V/PoE, IP67/IK10,

Basic IVA, Image sensor- 1 / 2.7"

CMOS, Effective Pixels 2560 ×

Min. Illumination Color: 0.01 Lux @

F1.2, AGC ON; Color: 0.04 Lux @ F2.2,

AGC ON; 0 lux with IR, Angle

adjustment- Pan : 0°-355°, Tilt : 0°-

67°, Rotation : 0°-355°, Focal Length-

2.8 mm @ F2.0, Defog, Lens Mount-

M12, True day/night, 120dB WDR,

Image features- 3D DNR, HLC & BLC,

Corridor Pattern, IR cut filter with

auto switch, Triple streams, Support

multi-stream real time transmission,

zones video mask, Smart codec by

ROI, SNR ≥52 dB, Video Compression

H.265, H.264, Video Analytics- Object

removal (object left/missing

detection), scene change and video

blur detection, intrusion and line

crossing. Alarm Triggers- Motion

detection, Intelligent video analytics,

Network disconnect, video

tampering, IP address conflict, Max

Frame Rate 30fps @ 4MP

(2560×1440), Five levels under VBR;

Freely adjustable under CBR, time

stamp, text overlay, flip & mirror, ROI,

Saturation, Brightness, Chroma,

Contrast, Wide Dynamic, Sharpen,

white balance, video rotation,

Scheduled profile settings, AGC,

illegal login, SD Card full, SD Card

error, Operating temperature - 30 °C

to 60 °C, Relative Humidity 10 % to

%, Network-1 RJ45 10M/100M self-

adaptive Ethernet port, Network

protocol TCP/IP, UDP, DHCP, NTP,

RTSP, PPPoE, DDNS, SMTP, FTP, UPnP,

Unicast, Multicast, ICMP, HTTP,

HTTPS, DNS, DDNS, RTP, RTCP, IGMP,

802.1X, QoS, Ipv4, Ipv6, Cyber

Security -HTTPS / IP Filter / IEEE

802.1X / Blacklist & whitelist / account

security / telnet access control / serial

password, ONVIF Profile (S & G),

HAPI3, FCC Part 15.107 Class A, FCC

Part 15.109 Class A , EN 55032, EN

REACH, CE, NDAA, BIS, Built-in micro

SD/SDHC/SDXC slot upto 128GB.

:BOSCH/MOBOTIX/TYCO/AVIGILON

Supply, Installation, Testing and

Commissioning of 16 Channel

Network Video Recorder (NVR), 1, RJ-

45 10/100/1000 Mbps self-adaptive

Ethernet interface, Supports H.265+/

H.265/H.264/H.264+ decoding

formats, Embedded NVR, 2 HDD Bays,

199 up to 6TB capacity each disk, HDMI, Nos 1.00 45000.00

VGA output, 1-ch @ 8 MP / 4- ch @

1080p, Incoming bandwidth

160Mbps, Outgoing 80 Mbps, CE FCC,

BIS, Operating Temp

-10 deg to 55 deg C, 2xUSB 2.0 1USB

and serial Interface Make :

BOSCH/MOBOTIX/TYCO/AVIGILON

Supply, Installation, Testing and

200 Commissioning of 10 Tb hard Disk for Nos 1.00 19600.00

Supply, Installation, Testing and

Commissioning of 55 Inch TV

Supply, Installation, Testing and

Commissioning of HDMI Cable 5 Mtr

SITC of 24 x 10/100/1000BASE-T PoE

ports 4 x Gigabit RJ45/SFP Combo

ports Advanced L2 switching and

security features L2+ Static Routing

Optional “standard mode” or

“surveillance mode” management

user interface 193 W PoE budget

[Approved by Competent Authority

i.e. not Below the rank of Executive

Engineer ] ( SOR : '7-13-15)

Signature of contractor Additional City Engineer (CENTRAL ZONE)

Seal Ahmedabad Municipal Corporation

AHMEDABAD MUNICIPAL CORPORATION

MAHANAGAR SEVA SADAN - Central ZONE

Name of Projects: Construction Of A Mini Sports Complex In Survey No. 48/B/1 Of Dariyapur Kajipura In

Madhupura Area Of Shahibaug Ward In The Central Zone

FINANCIAL BID ( To Be Submitted Online Only )

Sr. No. Description Amount

1 Amount For Civil+ Plumbing+ Electric+CCTV Rs.

I/We am/are willing to carry out work at ______ % above / below (should be written in figures and words)

the estimated cost mentioned above.

Estimated cost put to tender : RS. Estimated cost put to tender : RS.

Add_____% above : Rs ___________ Deduct_____% below : Rs __________

In words : Rupees _______________________ In words : Rupees_____________________

Signature of contractor Additional City Engineer (CENTRAL ZONE )

Seal Ahmedabad Municipal Corporation