Kerala

Active

Works

Civil Works - Buildings

Annual Plan Irimbiliyam GP 2026 27 Pr no 364 Center no 47 anganawadi maintenance

Local Self Government Department

Office of Assistant Engineer LID EW Irimbiliyam GP | Malappuram, Kerala

Amount: ₹2.1 LCloses: 23 Oct 20267d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published13 Oct 2026
Closes23 Oct 2026
Bid Opening26 Oct 2026

Tender Value

₹2.1 L

EMD Value

₹5,278

Closing Date

23 Oct 2026, 6:00 pm7d left

Tender Inviting Organisation

Name

Assistant Engineer

Address

Office of Assistant Engineer LID EW Irimbiliyam GP

Work Description

Anganvadi maintanance

Tender Information

Tender ID

2026_LSGD_878347_1

Reference Number

AEIBM/T2/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

240 days

Location

Office of Assistant Engineer LID EW Irimbiliyam GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredForm of tender (.pdf)

RequiredPreliminary agreement (.pdf)

RequiredAffidavit (.pdf)

RequiredSBD NIT (.pdf)

RequiredEpay and Ipact (.pdf)

RequiredLisence GST (.pdf)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹5,278

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

13 Oct 2026

Published

13 Oct 2026

Bid Opening

26 Oct 2026

Download Starts

13 Oct 2026

Download Ends

23 Oct 2026

Submission Starts

13 Oct 2026

Clarification Period

13 Oct 2026 - 23 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1C NO 47 Anganawadi maintenance
1.001	16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	55.85	sqm	-	-
1.002	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1.77	cum	-	-
1.003	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	172.9	kilogram	-	-
1.004	13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing	21.76	sqm	-	-
1.005	OD225461/2026-2027:Departmental Precoated galvanised iron sheet - Providing and fixing precoated galvanised iron profiles sheets (size shape, and, pitch of corrugation as approved by engineer in charge) .3mm(+.05%),in 240 mpa steel grade, 5-7 microns epoxyprimer on both side of the sheet and polyester top coat of 15-18 microns. Sheet should be protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 m or as desired by Engineer in charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x5mm) with EPDM seal complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. (By removing material and transportation fron exisitng GI sheet OD)	9	per sqm	-	-
1.006	50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.	7.56	cum	-	-
1.007	10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	290	kg	-	-
1.008	50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall	10	metre	-	-
1.009	OD225775/2026-2027:Providing and fixing 150 mm wide, square cut PVC 4 Kg/cm2 rain water gutter pipewith iron brackets with 25x5 mm flate ,screws and washeres etc.including making necessary connections with rain water pipes etc.complete.	6	metre	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

BOQ_1492883.xls

BOQ • 0.24 MB

pag.pdf

Tender Documents • 0.06 MB

fot.pdf

Tender Documents • 0.04 MB

AFF.pdf

Tender Documents • 0.05 MB

sbd.pdf

Tender Documents • 1.69 MB

EPAY_compressed_merged.pdf

Tender Documents • 0.07 MB

abstract.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1C NO 47 Anganawadi maintenance
1.001	16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	55.85	sqm	-	-
1.002	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1.77	cum	-	-
1.003	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	172.9	kilogram	-	-
1.004	13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing	21.76	sqm	-	-
1.005	OD225461/2026-2027:Departmental Precoated galvanised iron sheet - Providing and fixing precoated galvanised iron profiles sheets (size shape, and, pitch of corrugation as approved by engineer in charge) .3mm(+.05%),in 240 mpa steel grade, 5-7 microns epoxyprimer on both side of the sheet and polyester top coat of 15-18 microns. Sheet should be protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 m or as desired by Engineer in charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x5mm) with EPDM seal complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. (By removing material and transportation fron exisitng GI sheet OD)	9	per sqm	-	-
1.006	50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.	7.56	cum	-	-
1.007	10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	290	kg	-	-
1.008	50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall	10	metre	-	-
1.009	OD225775/2026-2027:Providing and fixing 150 mm wide, square cut PVC 4 Kg/cm2 rain water gutter pipewith iron brackets with 25x5 mm flate ,screws and washeres etc.including making necessary connections with rain water pipes etc.complete.	6	metre	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1C NO 47 Anganawadi maintenance

1.001

16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

55.85

sqm

1.002

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1.77

cum

1.003

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

172.9

kilogram

1.004

13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing

21.76

sqm

1.005

OD225461/2026-2027:Departmental Precoated galvanised iron sheet - Providing and fixing precoated galvanised iron profiles sheets (size shape, and, pitch of corrugation as approved by engineer in charge) .3mm(+.05%),in 240 mpa steel grade, 5-7 microns epoxyprimer on both side of the sheet and polyester top coat of 15-18 microns. Sheet should be protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 m or as desired by Engineer in charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x5mm) with EPDM seal complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. (By removing material and transportation fron exisitng GI sheet OD)

per sqm

1.006

50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

7.56

cum

1.007

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

290

1.008

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

metre

1.009

OD225775/2026-2027:Providing and fixing 150 mm wide, square cut PVC 4 Kg/cm2 rain water gutter pipewith iron brackets with 25x5 mm flate ,screws and washeres etc.including making necessary connections with rain water pipes etc.complete.

metre