Specification No.24/2020-21

Amount

Dismantling and clearing away from site to the designated place as directed by the engineer at site including labour, lead and lift etc., complete.

Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slabs

Brick Work in Cement mortar 1:5 using Chamber Burnt Bricks of size 9" x 4.5" x 3" including cost of all materials,labour lead ,lift etc complete.

Plastering the walls with CM 1:5, 12mm thick including cost of al materials,labour.lead.lift etc complete.

Flooring with good quality ceramic tiles/Non slippery tiles of size 305 mmx 305 mmx 6mm laid over 20mm thick CM 1:3 of approved quality and colour including cost of all materials lead,lift etc complete,

Dadooing walls with glazed tiles of size 300 x 200 x 6 mm laid in cement mortar 1 : 2 , 10 mm thick and pointing with white cement using 0.4 Kg / m2 including finishing the joint and pointing flush with tiles surface etc., complete.

Supplying and fixing of joint free double charged vitrified tiles of size 600mm x 600mm x 8 mm in CM 1:3 of approved quality and colour including cost of all materials, lead, lift etc complete,

Supplying,fabricating,erecting and fixing of 10 mm thick plaster of paris plain sheet (gyprock Pop board - Saint Gobain make) for false ceiling at a height of 3 m from the existing floor level,including cost of all materials, lead, lift, fabrication, carving, providing cornice work, droping design work,erection charges, cleaning and removal of debris from the work site, Interior painting with two coats of approved interior emulsion over one coat of primer .The False Ceiling design will be provided and execution of work is to be carried out as per the drawing and without any deviation etc., complete.

Fabricating Supplying and fixing in position of Aluminium anodised single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings average anatic film thickness of 15 microns etc., complete. (With automatic door closure and hinges).

Supplying and fixing of Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia including cost of all materials lead, lift, labour etc., complete

Supplying and fixining of SS Swan Neck Tap including cost of all materials lead, lift, labour etc., complete

Supplying and fixing of White Porcelain Sink of size 600mm x 450mm x 200mm with 32mm dia 'B' Class GI Waste Water Pipe and 32mm dia CP Waste Coupling including cost of all etc.,complete